Installing forms on windows 7 32 bit

dear all,
after searching and testing many senarios i found that you can open any form that have no attached libraries,
but when you try to open one that have attached libraries it will give you this error :
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     frmbld.exe
Application Version:     10.1.2.0
Application Timestamp:     42d63632
Fault Module Name:     KERNELBASE.dll
Fault Module Version:     6.1.7600.16385
Fault Module Timestamp:     4a5bdaae
Exception Code:     ebad198c
Exception Offset:     00009617
OS Version:     6.1.7600.2.0.0.256.48
Locale ID:     1025
Additional Information 1:     6a2b
Additional Information 2:     6a2bce80e85d22372a813a0ce95660c9
Additional Information 3:     a5df
Additional Information 4:     a5dfb0a8e0c718ad2c97024a8dc7d64d
so am not sure the problem is from oracle developer side or from windows 7 side but i already post this problem in both oracle and microsoft side no body answered probably for example microsoft said its oracle problem and oracle said they not planning to certify these,
so if any one found any helpful solution please share it we have to try to solve our problems by our self.

Hi Mohammad
I think you out to be on 10123 for the support.
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html -> this is certification matrix for Internet application Server 10.1.2x
cheers
Priya

Similar Messages

Installing Forms 11g 64bit on Windows Server 2008 64bit

Hi,
we are trying to install Forms 11g 64 bit with WebLogic 64bit on windows Server 2008 64bit and followed the short checklist of Jan Carlin :
- installed JDK 64bit
- installed WLS1032-generic
- started installation of Forms/Reports
Installation of Software worked fine and the configuration part did create the domain, but starting the domain fails (hang).
Info in Log-File :
=========================================================
oracle.as.provisioning.util.ConfigException:
Fehler beim Starten der Domain.
Cause:
Zeitüberschreitung beim Starten von Admin_Server.
Action:
Weitere Informationen finden Sie in den Logs.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3142)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1647)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
[2010-02-22T19:37:39.730+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IRqToJA5uXW5Pzw0yd1BWefv00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
================================================
Somewhere I've read that the reason might be that the installation uses 32bit JDK, but I don't know if I did something wrong.
Somewhere else I've read that the reason could be the Path setting, which may include some directories with emphasis in the name which might be a problem for Weblogic.
Any idea or help is appreciated.
Thanks,
Mark

FYI,
This is related to Oracle-Bug 9370799 which hopefulls get sorted out sometimes. Having "(" or ")" somewhere in the PATH is not working. The workaround til the Bug is solved as of support is :
=================================
1) Remove the directory with "(" ")" from the System Path at install time only (this is what you have already performed)
2) Roll back the change so the System Path contains again the directory path with parenthesis
3) Copy in the clipboard the current PATH value and edit the <Middleware Home>\wlserver_10.3\common\bin\commEnv.cmd file and look for the following line:
if "%WL_USE_X86DLL%" == "true" set PATH=%PATCH_PATH%;%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%ANT_HOME%\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%PATH%;%WL_HOME%\server\native\win\32\oci920_8
4) Before this line define PATH to value you have in the clipboard without the reference to the directory with "(" and ")"
5) Save the commEnv.cmd and you should be able to start up your domain having the directory containing the "(" and ")" in the System Path
==================================
Thanks for your replies,
Mark

HELP! Forms 10g Windows Runtime Problem!!!

After I installed Forms 10g windows, I modified the configuration according to my Forms 9i configuration.
But when I open a form and run it, the runtime URL only refer to a temporary htm file which jumps to:
http://localhost:8890/forms90/f90servlet
I have to enter the query strings to run the form, like
http://localhost:8890/forms90/f90servlet?form=C:\webutil\forms\CIMS10g.fmx&userid=OSSCHINA/OSSCHINA@orcl&buffer_records=NO&debug_messages=NO&array=YES&query_only=NO&quiet=NO&RENDER=YES
So how can I make the proper configuration to auto-generate the correct query strings when running the form, just like what it is in Forms 9i?

Suicheng,
which configuration did you change and what do you mean by "when I open a form and run it".
Do you mean the preferences settings in the Forms builder ? There is a button to reset the URL used by the Forms builder to bring it back to the deault setting
Frank

Oracle Forms 6i(32-bit) = Oracle database 10g R2 Windows 2008 R2 64-bit)

We have Oracle database 10g R2 installed on a Microsoft Windows 2008 R2 (64-bit) (SERVER1)
We have Oracle Forms 6i (patch 4a) installed on a Microsoft Windows XP Professional (32-bit) (SERVER2)
I am not able to connect from SERVER2 to SERVER1, either through SQLPLUS or FORMS BUILDER.
Its giving some DLL error.
Is it because forms 6i (32-bit) cannot connect to a 64-bit database on a 64-bit OS ?

There might be problems with 8i clients (like forms 6i) if the database uses AL32UTF8 characterset indeed (if you need unicode and you need to run forms 6i use UTF8 instead) but this should not be related to the platform of the database.
The platform of the database server really should not matter as the forms runtime talks via SQL*Net with the database server and in the end it does not matter if the database runs on linux, windows whatsoever or unix 32 or 64 bit for the client. The only problem you'll encounter is that SQL*Net also changes with versions and thus "older" clients might not be able to communicate with "newer" servers and vice versa.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> select * from v$nls_parameters where parameter = 'NLS_CHARACTERSET';
PARAMETER                                                       |VALUE
----------------------------------------------------------------|---------------------------
NLS_CHARACTERSET                                                |WE8MSWIN1252
SQL>I just tried a 6i form (6.0.8.25.2) connected to this database. It worked ;) (again: not certified)
cheers

Install Form & Report 11.1.2.0.0 with Weblogic 10.3.5 64 bits == ERROR

Hello, i try install Forms Report in a new windows 2008 R2 Server but send error.
the steps are:
Step 1. Install Windows server 2008 R2 Foundation 64x.
Step 2. Download and Install JDK Jdk-6u31-windows-x64.exe.
Step 3. Download and Install Weblogic 10.3.5 64 bits with java -Xmx1024m - jar wls1035_generic.jar
Step 4. Don't execute quickstart.
Step 5. Download and Install Forms & Report ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1, run Setup
Step 6. select "Install and configure"
Step 7. select "configure for deployment"
Step 8. Create Domain
Step 9. Select "Forms Builder" and "Reports Builder".
Step 10. Automatic Port = yes
Step 11. Proxy = no
Step 12. OID = no
Install = 100% OK
Configuration --> ERROR in "Configuring OCM", next click "Continue"
All next configuration are OK
please someone can help me, your help is greatly appreciated
Thank you very much
Carlos

Hi, Norbert
Thank for your excellent help to the point.
All work well.
*1.- opmnctl status -l*
H:\Oracle\Middleware\asinst_1\bin>opmnctl status -l
Processes in Instance: asinst_1
-----------------------------+------
ias-component | process-type | pid | status |
uid | memused | uptime | ports
-----------------------------+------
emagent_asinst_1 | EMAGENT | 5652 | Alive | 161
0552159 | 13752 | 0:11:25 | N/A
RptSvr_COBROTECH-SRV_asinst_1 | ReportsServerComp~ | 5820 | Alive | 161
0552158 | 112664 | 0:11:41 | N/A
ohs1 | OHS | 4588 | Alive | 161
0552157 | 23252 | 0:13:15 | https:8889,https:8890,http:8888
*2.- Java*
H:\Oracle\Middleware\asinst_1\bin>java -version
java version "1.6.0_26"
Java(TM) SE Runtime Environment (build 1.6.0_26-b03)
Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode)
all other works fine
the OraInstall2012-03-05-12xxx.err include:
oracle.sysman.oii.oiit.OiitTargetLockNotAvailableException: OUI-10022: El área de destino C:\Program Files\Oracle\Inventory no se puede utilizar porque su estado no es válido.
     at oracle.sysman.oii.oiit.OiitTargetLocker.createLocksDir(OiitTargetLocker.java:1033)
     at oracle.sysman.oii.oiit.OiitTargetLocker.getWriterLock(OiitTargetLocker.java:207)
     at oracle.sysman.oii.oiit.OiitTargetLocker.getWriterLock(OiitTargetLocker.java:185)
     at oracle.sysman.oii.oiit.OiitTargetLocker.getWriterLock(OiitTargetLocker.java:172)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.acquireLocks(OiicStandardInventorySession.java:403)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:301)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:231)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:180)
     at oracle.as.install.engine.modules.install.util.InstallUtils.createInventorySession(InstallUtils.java:443)
     at oracle.as.install.engine.modules.install.util.InstallUtils.setAdditionalOracleHomeProperty(InstallUtils.java:329)
     at oracle.as.install.classic.installaction.ClassicInstallAction.executeAfterCopy(ClassicInstallAction.java:250)
     at oracle.as.install.engine.modules.util.installaction.InstallActionProviderUtility.invokeExecuteAfterCopy(InstallActionProviderUtility.java:93)
     at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.executeEvent(ModifiedDWizard.java:2948)
     at oracle.as.install.engine.modules.presentation.PresentationModule.processModuleEvent(PresentationModule.java:655)
     at oracle.as.install.engine.modules.util.PartnerModuleImpl.processEvent(PartnerModuleImpl.java:118)
     at oracle.as.install.engine.InstallEngine.notifyListeners(InstallEngine.java:626)
     at oracle.as.install.engine.InstallEngine.processEvent(InstallEngine.java:584)
     at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyAllEventListenersHelper(PartnerModuleImpl.java:227)
     at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyListeners(PartnerModuleImpl.java:158)
     at oracle.as.install.engine.modules.install.InstallModule.onSuccess(InstallModule.java:478)
     at oracle.as.install.engine.modules.install.action.InstallManager.notifySuccess(InstallManager.java:322)
     at oracle.as.install.engine.modules.install.command.InstallSuccessCommand.execute(InstallSuccessCommand.java:42)
     at oracle.as.install.engine.modules.install.action.InstallManager.onInstallEvent(InstallManager.java:334)
     at oracle.as.install.engine.modules.install.action.AbstractOUIHandler.fireInstallEvent(AbstractOUIHandler.java:147)
     at oracle.as.install.engine.modules.install.action.OUIInstaller.succeed(OUIInstaller.java:542)
     at oracle.as.install.engine.modules.install.action.OUIInstaller.start(OUIInstaller.java:480)
     at oracle.as.install.engine.modules.install.action.InstallManager.launchOUI(InstallManager.java:212)
     at oracle.as.install.engine.modules.install.InstallModule.launchOUI(InstallModule.java:155)
     at oracle.as.install.engine.modules.install.InstallModule$1.run(InstallModule.java:246)
Form and Report Builder.
in H:\Oracle\Middleware\Oracle_FRHome1\bin
frmbld , start and load example form ok
rwbiulder send "REP-50125: rwbuilder.conf:java.lang.NullPointerException"
have any idea how fix report builder error?
Thank you very much for your invaluable help.
Carlos

Installing Forms Server on Windows 2000

We installed Forms Server 6i on Windows 2000. We completed the installation successfully. When we clicked on the 'Run the Form on the Web.', it gives 'This page cannot be displayed.' error. We tried this twice, but getting same error.
Any suggestions/help is greatly appreciated.
Thanks
VL.

Do you have your web server installed too?
forms server works in conjunction with your web server.
Make sure you have done the following...
Web server is listening on port 80
Forms server is running in HTTP mode. ( You may need to stop and restart the forms service in win2000 if you change this from socket in the registry )
You must also set up your virtual directorys on your web server. I used the microsoft internet information server that comes with win2000. It's an add on component on the disk. Oracle would suggest you use Oracle 9i application server ( Which is rebadged Apache )
Forms server is running on port 9000. Also set in the registry.
You also edit the in the formsweb.cfg file in <ORACLE_HOME>\forms60\server
Make sure HTTP mode is set in this too. You can also change various params such as the applet size etc. I would recommend the Oracle look and feel and run in separate windows options.
All the forms tester does is run a bit of cgi which will dynamically change the base HTML file in <ORACLE_HOME>\forms60\sever.
You will notice there is one file which is baseie and basejint. The cgi will choose to use the one depending on if you choose to use jinitiator or ie50=native.
When you go live can maually edit these files depending on what java viutual machine you choose. You can place this file in your web site root as defaut.htm or whatever you want and it will serve you app without using the cgi html generator.
Sorry if parts of this you know but it took me weeks of work to set this up. The Oracle documentation is not very well put together.
I have read nearly every line of the damn stuff.
Please e-mail me if you have any queries as I may have not made sense in places.
Oliver
null

Oracle 11g, 64 bit, Forms 11g 64 bit on Windows 7 Professional 64-bit

We just changed over to Windows 7 64 Bit now we trying to find out what version of Fusion Middleware will run on Windows 7 64 bit. Most posting say you can't install
Oracle 11g 64 bit on Windows 7 64 bit OS, but we have found a few that say they have found away to install 11g 64 bit. Not one of them shows you the install
from start to finish and some of the posting go back to 2009!
If this has been a problem from 2009 - present can some tell why Oracle has not provided a fix or update for Windows 7 64 bit and are they going to in the future?
If anyone knows how install Oracle 11g 64 bit, Forms 11g 64 bit on Windows 7 Professional 64-bit please let me know!
Thanks!
Monty

Monty,
I assume that you mean the developer tools? They are kind of in limbo with 64-bit support for the dev tools, but if you want to get the latest (as of today) release working, you can do this:
1). Install a 64-bit JDK
2). Install WLS 10.3.4 generic (use the 64-bit java)
3). Install Forms/Reports 11.1.1.2 (install only, don't configure)
4). Install Forms/Reports 11.1.1.4 (install only, don't configure)
5). Edit your PATH system variable so that it doesn't contain any parenthesis. I did this by creating a junction point for c:\program files (x86) and using the junction point in the path
6). Run the configuration utility to create the forms/reports domain. Be sure to specify the dev tools
7). Look in the start menu for the Reports Builder icon. It will be pointing to a batch file. Edit that batch file to comment out the lines that print a message and exit (because you're on 64-bit)
Not officially supported, but it works for me.
John

Install Forms and Reports 6i on 64 bits machine

Hello,
It is possible to install Forms and Reports 6i on 64 bits machine?
How it is done?
Thank you.
Best Regards
Rute

Forms is a 32 bit application so you need to do what
you normally do for the platform in question when you
install and run in 32 bit emulation.Please, can you explain how to do it on the windows 2003 x64 machine?

Installing Forms and Reports 6i on Windows Me

Has any one found a work around to install Forms and Reports 6i on Windows Me, I keep getting an error message. I already have Oracle 8i Personal Edition 8.1.5 installed and working on my machine.
Thanks,
Brent

Hi Jan,
I haven't tried to run Forms and Reports on Windows Server 2003, but I have worked on Windows XP and UNIX with F/R 6i 9i and 10g. I never had much luck with 9i Forms and Reports, 10g rel 1 was better, but 10g rel 2 is best. I recommend you bite the bullet and convert to 10g AS, Forms & Reports 10g rel 2. After running your 6i F/R to 10g through the converter, you may need to adjust fonts and colors.
Regarding your specific question, I am surprised that the rwrun60 works at all with 9i AS. And rwrun90 probably won't run the 6i version of your reports without recompiling in the 9 version.
Hope this helps,
Frank

Unable to install itunes in windows 7 64 bit - hanging

Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
Also i am unable to uninstall Apple update software. Are these both related.
Now how do i get the software installed( itunes installed in windows 7)

Hey gigipramod,
Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

I couldn't install itunes in windows 7, 64 bit, DLL not found, can any one assist

Windows 7, 64 bit, unable to install. DLL missing, kindly assist.

That's perfect, thanks.
Although you're getting a different error message, try the procedure from the following user tip with that one:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Why can't I install Itunes on windows vista 64 bit?

Why can't I install Itunes on windows vista 64 bit? I have removed all apple software and repeated the reinstall many times but it fails. I get this complicated error mesage and then the installer rolls back and fails.

I get this complicated error mesage and then the installer rolls back and fails.
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

Unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64

I am unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64 bit.Basically installation rollback on Win 7 64 bit image.
MSI Log File :-
Property(S): ProductToBeRegistered = 1
MSI (s) (5C:D4) [17:59:21:784]: Note: 1: 1708
MSI (s) (5C:D4) [17:59:21:784]: Product: Adobe_CreativieSuite_5_MNT -- Installation operation failed.
MSI (s) (5C:D4) [17:59:21:784]: Windows Installer installed the product. Product Name: Adobe_CreativieSuite_5_MNT. Product Version: 1.2.0000. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
Please let me how to install 64 bit package on Win7 64 bit.
Thanks in Advance.

Ok so I downloaded the most current installer CS5.1, My previous installer was version 5.0. It did install fine fully updated to my license version. I just wanted to update in case anyone in the future has a similiar experience. Too bad this advice was not offered by the "experts" here.

Is there a way to install just the 32 bit version of Photoshop CS5 on a Windows 7 64 bit machine?

I have a custom built Java 6 application that doesn't like Photoshop CS5 64 bit edition. The program copies over a file from the network to the local machine and then opens it in Photoshop. The user manipulates the image and saves the changes. The user then completes the image and the application copies the image back to the server. The problem we're having is: When we use Photoshop CS5 64-bit, it takes about 2 minutes for Photoshop to open the image. The file is copied over within 2 seconds and the Photoshop icon on the windows taskbar starts flashing. But then you spend a few minutes waiting for it to open.
Some things that I have tried to isolate the problem:
- I found you can copy the file somewhere else, double click on it and the image will open in Photoshop before the script is able to open the file.
- I tried uninstalling Photoshop and reinstalling just the 64 bit edition without the 32 bit installation. The script just stops working in this situation.
- I tried uninstalling CS5 and installing CS3. The image opens as soon as the file is copied over.
What I would like to try next is to install just the CS5 32 bit version. But the installer is being uncooperative and will only allow either the 64 bit version or both the 64 and 32 bit versions. So, back to my question: Is there a way to install just the 32 bit version of Photoshop CS5 on a Windows 7 64 bit machine?

Do you mean schroot? If so I'm not sure exactly how well that will work out, because the part that depends on python is a deamon that handles communication between the USB dongle and the Tux Droid which may mean hacking the deamon a bit so ether way this does not seem like it will be a easy task.

Error while installing oracle forms on windows 7

hello all,
i want to install oracle forms 10g on windows 7.
But during installation i am facing the following problem.
*"Install has encountered an error while attempting to verify your virtual settings.please verify that the sum of the initial sizes of the paging files is at least 256 mb"*
How can i avoid this?
Thanks
Kaushal

Read the following link and you will get Answer.
How to Install Oracle ON windows 7
If someone response is helpful or correct, please mark it accordingly.

Installing forms on windows 7 32 bit

Similar Messages

Maybe you are looking for