Installing grsecurity patched kernel from AUR

After entering 'yaourt grsecurity' in a terminal, and choosing to install kernel26-grsecurity, what else is necessary to enable the use of this kernel?

After installing it, you need just need to reboot and select the new kernel at the GRUB prompt.

Similar Messages

Linux-ck kernel from AUR with GCC optimisation and got Kernel panic

I have been using the linux-ck patched kernel from the AUR for the last few weeks https://aur.archlinux.org/packages/Linux-ck/
I decided I would try to compile it with the gcc optimised patch as well. https://github.com/graysky2/kernel_gcc_patch
I have a laptop using the intel i7-4712MQ CPU which I understand is part of the Haswell family.
I downloaded the tarball from the AUR, extracted it, I edited the PKGBUILD, to enabe the nconfig and also the BFQ scheduler, ran makepkg -s enabled the patch for Haswell chip family and saved it as .config and carried on building the kernel as normal, then installed the resulting packages with pacman -U kernel and the header and then rebooted.
on boot I received a failed to execute /init error 8 and no working init found, I fell back to using the default Arch Kernel and can also rebild the linux-ck patched kernel as normal with the GCC optimisation patch with no problems, but I want to understand what I did wrong when applying the GCC patch and fix it, if there is another log I can get please let me know and I will post it.
I know it is not the new version of the Kernel as I had built version 3.19-1 it without the gcc optimisation patch successfully on Friday
Thanks
Rob
Last edited by robt77 (2015-03-01 12:28:58)

Trilby wrote:
robt77 wrote:I downloaded the tarball from the AUR, extracted it, I edited the PKGBUILD, to enabe the nconfig and also the BFQ scheduler, ran makepkg -s enabled the patch for Haswell chip family and saved it as .config and carried on building the kernel
This is not very clear. What do you mean you carried on building the kernel after running makepkg -s? Makepkg -s builds the packages, any configuration you make after that command is not applied to the built packages.
after running makepkg -S it came up with the menu to select different options for the kernel, so I arrowed to Processor type and features ---> Processor family ---> and found Intel Haswell, selected that and saved it by pressing f5 it saved to a file called .config and it started building the kernel
robt77 wrote:on boot I received a failed to execute /init error 8 and no working init found
Then the kernel loaded just fine - init failed. Did you (re)build an initramfs for the new kernel? What is the bootloader command used for this kernel?
44
I did not buikd ab initramfs, I have always just had to download the tar ball from AUR, extract it , then run makepkg -s and then install the packages with pacman -U and reboot.
Here is a link to the bootloader command from grub http://hastebin.com/roweqocuqi.vala

I can't install lib32-boost-libs from AUR

I am trying to install Plex Media Server from AUR and one of the dependencies is lib32-boost-libs, but when I try and install it I get an error. How can I fix this?
==> lib32-boost-libs dependencies:
- lib32-bzip2 (already installed)
- lib32-zlib (already installed)
- lib32-gcc-libs (already installed)
- icu (already installed)
- python (already installed)
- python2 (already installed)
- bzip2 (already installed)
- lib32-zlib (already installed)
- openmpi (already installed)
- gcc-multilib (already installed)
==> Continue building lib32-boost-libs ? [Y/n]
==> ------------------------------------------
==>
==> Building and installing package
==> Making package: lib32-boost-libs 1.47.0-1 (Tue Jan 3 12:33:08 MST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading boost_1_47_0.tar.gz...
--2012-01-03 12:33:08-- http://downloads.sourceforge.net/sourceforge/boost/boost_1_47_0.tar.gz
Resolving downloads.sourceforge.net... 216.34.181.59
Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://downloads.sourceforge.net/project/boost/boost/1.47.0/boost_1_47_0.tar.gz [following]
--2012-01-03 12:33:18-- http://downloads.sourceforge.net/project/boost/boost/1.47.0/boost_1_47_0.tar.gz
Reusing existing connection to downloads.sourceforge.net:80.
HTTP request sent, awaiting response... 302 Found
Location: http://superb-dca2.dl.sourceforge.net/project/boost/boost/1.47.0/boost_1_47_0.tar.gz [following]
--2012-01-03 12:33:18-- http://superb-dca2.dl.sourceforge.net/project/boost/boost/1.47.0/boost_1_47_0.tar.gz
Resolving superb-dca2.dl.sourceforge.net... 209.61.193.20
Connecting to superb-dca2.dl.sourceforge.net|209.61.193.20|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 55798639 (53M) [application/x-gzip]
Saving to: `boost_1_47_0.tar.gz.part'
100%[=====================================================================================================================>] 55,798,639 322K/s in 2m 36s
2012-01-03 12:35:58 (350 KB/s) - `boost_1_47_0.tar.gz.part' saved [55798639/55798639]
==> Validating source files with md5sums...
boost_1_47_0.tar.gz ... Passed
==> Extracting Sources...
-> Extracting boost_1_47_0.tar.gz with bsdtar
==> Starting build()...
/tmp/yaourt-tmp-jason/aur-lib32-boost-libs/./PKGBUILD: line 38: ./build.sh: Permission denied
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build lib32-boost-libs.
==> Restart building lib32-boost-libs ? [y/N]
==> -----------------------------------------
==>

Raynman wrote:My guess: you have /tmp mounted with 'noexec'.
It was, but I took noexec out. After I rebooted and tried to install lib32-boost-libs I got a very similar error
==> Continue building lib32-boost-libs ? [Y/n]
==> ------------------------------------------
==>
==> Building and installing package
==> Making package: lib32-boost-libs 1.48.0-1 (Thu Jan 5 13:34:17 MST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading boost_1_48_0.tar.gz...
--2012-01-05 13:34:17-- http://downloads.sourceforge.net/sourceforge/boost/boost_1_48_0.tar.gz
Resolving downloads.sourceforge.net... 216.34.181.59
Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://downloads.sourceforge.net/project/boost/boost/1.48.0/boost_1_48_0.tar.gz [following]
--2012-01-05 13:34:32-- http://downloads.sourceforge.net/project/boost/boost/1.48.0/boost_1_48_0.tar.gz
Reusing existing connection to downloads.sourceforge.net:80.
HTTP request sent, awaiting response... 302 Found
Location: http://voxel.dl.sourceforge.net/project/boost/boost/1.48.0/boost_1_48_0.tar.gz [following]
--2012-01-05 13:34:32-- http://voxel.dl.sourceforge.net/project/boost/boost/1.48.0/boost_1_48_0.tar.gz
Resolving voxel.dl.sourceforge.net... 208.122.29.16, 208.122.29.17, 208.122.29.18, ...
Connecting to voxel.dl.sourceforge.net|208.122.29.16|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 58665706 (56M) [application/x-gzip]
Saving to: `boost_1_48_0.tar.gz.part'
100%[=====================================================================================================================>] 58,665,706 215K/s in 4m 52s
2012-01-05 13:39:28 (196 KB/s) - `boost_1_48_0.tar.gz.part' saved [58665706/58665706]
==> Validating source files with md5sums...
boost_1_48_0.tar.gz ... Passed
==> Validating source files with sha1sums...
boost_1_48_0.tar.gz ... Passed
==> Extracting Sources...
-> Extracting boost_1_48_0.tar.gz with bsdtar
==> Starting build()...
### Using 'cc' toolset.
rm -rf bootstrap
mkdir bootstrap
gcc -o bootstrap/jam0 -m32 command.c compile.c debug.c expand.c glob.c hash.c hdrmacro.c headers.c jam.c jambase.c jamgram.c lists.c make.c make1.c newstr.c option.c output.c parse.c pathunix.c pathvms.c regexp.c rules.c scan.c search.c subst.c timestamp.c variable.c modules.c strings.c filesys.c builtins.c pwd.c class.c native.c md5.c w32_getreg.c modules/set.c modules/path.c modules/regex.c modules/property-set.c modules/sequence.c modules/order.c execunix.c fileunix.c
./bootstrap/jam0 -f build.jam --toolset=cc --toolset-root= clean
...found 1 target...
...updating 1 target...
...updated 1 target...
./bootstrap/jam0 -f build.jam --toolset=cc --toolset-root=
...found 49 targets...
...updating 3 targets...
[MKDIR] bin.linuxx86
[COMPILE] bin.linuxx86/b2
[COPY] bin.linuxx86/bjam
...updated 3 targets...
Performing configuration checks
- has_icu builds : yes
...patience...
...found 1013 targets...
...updating 82 targets...
common.mkdir ../../bin.v2/tools
common.mkdir ../../bin.v2/tools/bcp
common.mkdir ../../bin.v2/tools/bcp/gcc-4.6.2
common.mkdir ../../bin.v2/tools/bcp/gcc-4.6.2/release
common.mkdir ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/add_dependent_lib.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/add_path.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/bcp_imp.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/copy_path.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/file_types.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/fileview.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/main.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/path_operations.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/scan_cvs_path.o
scan_cvs_path.cpp: In member function ‘void bcp_implementation::scan_cvs_path(const boost::filesystem3::path&)’:
scan_cvs_path.cpp:34:68: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/licence_info.o
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/scan_licence.o
scan_licence.cpp: In function ‘const char* context_before_license(const fileview&, fileview::const_iterator, int)’:
scan_licence.cpp:31:76: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
scan_licence.cpp: In function ‘const char* context_after_license(const fileview&, fileview::const_iterator, int)’:
scan_licence.cpp:52:74: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
gcc.compile.c++ ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/output_licence_info.o
common.mkdir ../../bin.v2/libs/test
common.mkdir ../../bin.v2/libs/test/build
common.mkdir ../../bin.v2/libs/test/build/gcc-4.6.2
common.mkdir ../../bin.v2/libs/test/build/gcc-4.6.2/release
common.mkdir ../../bin.v2/libs/test/build/gcc-4.6.2/release/link-static
gcc.compile.c++ ../../bin.v2/libs/test/build/gcc-4.6.2/release/link-static/execution_monitor.o
gcc.compile.c++ ../../bin.v2/libs/test/build/gcc-4.6.2/release/link-static/debug.o
gcc.compile.c++ ../../bin.v2/libs/test/build/gcc-4.6.2/release/link-static/cpp_main.o
gcc.archive ../../bin.v2/libs/test/build/gcc-4.6.2/release/link-static/libboost_prg_exec_monitor.a
common.mkdir ../../bin.v2/libs/regex/build/gcc-4.6.2/release
common.mkdir ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/c_regex_traits.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/cpp_regex_traits.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/cregex.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/fileiter.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/icu.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/instances.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/posix_api.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/regex.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/regex_debug.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/regex_raw_buffer.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/regex_traits_defaults.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/static_mutex.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/w32_regex_traits.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/wc_regex_traits.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/wide_posix_api.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/winstances.o
gcc.compile.c++ ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/usinstances.o
gcc.archive ../../bin.v2/libs/regex/build/gcc-4.6.2/release/link-static/libboost_regex.a
common.mkdir ../../bin.v2/libs/filesystem
common.mkdir ../../bin.v2/libs/filesystem/build
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v2
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v2/src
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v2/src/v2_operations.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v2/src/v2_path.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v2/src/v2_portability.o
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3
common.mkdir ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/operations.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/path.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/portability.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/windows_file_codecvt.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/codecvt_error_category.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/path_traits.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/unique_path.o
gcc.compile.c++ ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/v3/src/utf8_codecvt_facet.o
gcc.archive ../../bin.v2/libs/filesystem/build/gcc-4.6.2/release/link-static/libboost_filesystem.a
common.mkdir ../../bin.v2/libs/system
common.mkdir ../../bin.v2/libs/system/build
common.mkdir ../../bin.v2/libs/system/build/gcc-4.6.2
common.mkdir ../../bin.v2/libs/system/build/gcc-4.6.2/release
common.mkdir ../../bin.v2/libs/system/build/gcc-4.6.2/release/link-static
gcc.compile.c++ ../../bin.v2/libs/system/build/gcc-4.6.2/release/link-static/error_code.o
gcc.archive ../../bin.v2/libs/system/build/gcc-4.6.2/release/link-static/libboost_system.a
gcc.link ../../bin.v2/tools/bcp/gcc-4.6.2/release/link-static/bcp
common.mkdir ../../dist
common.mkdir ../../dist/bin
common.copy ../../dist/bin/bcp
...updated 82 targets...
Building the Boost C++ Libraries.
Performing configuration checks
- has_icu builds : no
warning: Graph library does not contain MPI-based parallel components.
note: to enable them, add "using mpi ;" to your user-config.jam
- iconv (libc) : yes
- icu : no
- icu (lib64) : no
- ../config//has_gcc_visibility builds : yes
- ../config//has_long_double_support builds : yes
warning: skipping optional Message Passing Interface (MPI) library.
note: to enable MPI support, add "using mpi ;" to user-config.jam.
note: to suppress this message, pass "--without-mpi" to bjam.
note: otherwise, you can safely ignore this message.
Component configuration:
- chrono : building
- date_time : building
- exception : building
- filesystem : building
- graph : building
- graph_parallel : building
- iostreams : building
- locale : building
- math : building
- mpi : building
- program_options : building
- python : not building
- random : building
- regex : building
- serialization : building
- signals : building
- system : building
- test : building
- thread : building
- timer : building
- wave : building
...patience...
...patience...
...patience...
...patience...
...found 6866 targets...
...updating 880 targets...
common.mkdir stage
common.mkdir stage/lib
common.mkdir bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/c_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/cpp_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/cregex.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/fileiter.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/icu.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/instances.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/posix_api.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/regex.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/regex_debug.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/regex_raw_buffer.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/regex_traits_defaults.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/static_mutex.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/w32_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/wc_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/wide_posix_api.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/winstances.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/usinstances.o
gcc.link.dll bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_regex.so.1.48.0
common.copy stage/lib/libboost_regex.so.1.48.0
ln-UNIX stage/lib/libboost_regex.so
common.mkdir bin.v2/libs/graph
common.mkdir bin.v2/libs/graph/build
common.mkdir bin.v2/libs/graph/build/gcc-4.6.2
common.mkdir bin.v2/libs/graph/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/graph/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/graph/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/graph/build/gcc-4.6.2/release/address-model-32/threading-multi/read_graphviz_new.o
gcc.compile.c++ bin.v2/libs/graph/build/gcc-4.6.2/release/address-model-32/threading-multi/graphml.o
gcc.link.dll bin.v2/libs/graph/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_graph.so.1.48.0
common.copy stage/lib/libboost_graph.so.1.48.0
ln-UNIX stage/lib/libboost_graph.so
common.mkdir bin.v2/libs/iostreams
common.mkdir bin.v2/libs/iostreams/build
common.mkdir bin.v2/libs/iostreams/build/gcc-4.6.2
common.mkdir bin.v2/libs/iostreams/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/file_descriptor.o
gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/mapped_file.o
gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/zlib.o
gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/gzip.o
gcc.compile.c++ bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/bzip2.o
gcc.link.dll bin.v2/libs/iostreams/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_iostreams.so.1.48.0
common.copy stage/lib/libboost_iostreams.so.1.48.0
ln-UNIX stage/lib/libboost_iostreams.so
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/encoding
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/encoding/codepage.o
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/date_time.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/format.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/formatting.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/generator.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/ids.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/localization_backend.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/message.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/shared/mo_lambda.o
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util/codecvt_converter.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util/default_locale.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util/info.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util/locale_data.o
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix/codecvt.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix/collate.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix/converter.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix/numeric.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/posix/posix_backend.o
common.mkdir bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std/codecvt.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std/collate.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std/converter.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std/numeric.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/std/std_backend.o
gcc.compile.c++ bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/util/gregorian.o
gcc.link.dll bin.v2/libs/locale/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_locale.so.1.48.0
common.copy stage/lib/libboost_locale.so.1.48.0
ln-UNIX stage/lib/libboost_locale.so
common.mkdir bin.v2/libs/math/build
common.mkdir bin.v2/libs/math/build/gcc-4.6.2
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/..
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/../src
common.mkdir bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/../src/tr1
gcc.compile.c++.pch bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/../src/tr1/pch.hpp.gch
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_laguerre.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_legendre.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/beta.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_1.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_2.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_3.o
...on 100th target...
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_i.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_j.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_k.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_neumann.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_1.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_2.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_3.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expint.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hermite.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/laguerre.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/legendre.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/riemann_zeta.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_bessel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_legendre.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_neumann.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_tr1.so.1.48.0
common.copy stage/lib/libboost_math_tr1.so.1.48.0
ln-UNIX stage/lib/libboost_math_tr1.so
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_laguerref.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_legendref.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/betaf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_1f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_2f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_3f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_if.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_jf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_kf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_neumannf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_1f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_2f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_3f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expintf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hermitef.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/laguerref.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/legendref.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/riemann_zetaf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_besself.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_legendref.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_neumannf.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_tr1f.so.1.48.0
common.copy stage/lib/libboost_math_tr1f.so.1.48.0
ln-UNIX stage/lib/libboost_math_tr1f.so
common.mkdir bin.v2/libs/math/config/gcc-4.6.2/release
common.mkdir bin.v2/libs/math/config/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/math/config/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/math/config/gcc-4.6.2/release/address-model-32/threading-multi/has_long_double_support.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_laguerrel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/assoc_legendrel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/betal.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_1l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_2l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/comp_ellint_3l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_il.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_jl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_bessel_kl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cyl_neumannl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_1l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_2l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/ellint_3l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expintl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hermitel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/laguerrel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/legendrel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/riemann_zetal.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_bessell.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_legendrel.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/sph_neumannl.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_tr1l.so.1.48.0
common.copy stage/lib/libboost_math_tr1l.so.1.48.0
ln-UNIX stage/lib/libboost_math_tr1l.so
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/acosh.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/asinh.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/atanh.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cbrt.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/copysign.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erfc.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expm1.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fmax.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fmin.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fpclassify.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hypot.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lgamma.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/llround.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/log1p.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lround.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nextafter.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nexttoward.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/round.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/tgamma.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/trunc.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_c99.so.1.48.0
common.copy stage/lib/libboost_math_c99.so.1.48.0
ln-UNIX stage/lib/libboost_math_c99.so
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/acoshf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/asinhf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/atanhf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cbrtf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/copysignf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erfcf.o
...on 200th target...
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erff.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expm1f.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fmaxf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fminf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fpclassifyf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hypotf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lgammaf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/llroundf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/log1pf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lroundf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nextafterf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nexttowardf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/roundf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/tgammaf.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/truncf.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_c99f.so.1.48.0
common.copy stage/lib/libboost_math_c99f.so.1.48.0
ln-UNIX stage/lib/libboost_math_c99f.so
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/acoshl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/asinhl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/atanhl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/cbrtl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/copysignl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erfcl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/erfl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/expm1l.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fmaxl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fminl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/fpclassifyl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/hypotl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lgammal.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/llroundl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/log1pl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/lroundl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nextafterl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/nexttowardl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/roundl.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/tgammal.o
gcc.compile.c++ bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/truncl.o
gcc.link.dll bin.v2/libs/math/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_math_c99l.so.1.48.0
common.copy stage/lib/libboost_math_c99l.so.1.48.0
ln-UNIX stage/lib/libboost_math_c99l.so
common.mkdir bin.v2/libs/program_options
common.mkdir bin.v2/libs/program_options/build
common.mkdir bin.v2/libs/program_options/build/gcc-4.6.2
common.mkdir bin.v2/libs/program_options/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/cmdline.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/config_file.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/options_description.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/parsers.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/variables_map.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/value_semantic.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/positional_options.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/utf8_codecvt_facet.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/convert.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/winmain.o
gcc.compile.c++ bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/split.o
gcc.link.dll bin.v2/libs/program_options/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_program_options.so.1.48.0
common.copy stage/lib/libboost_program_options.so.1.48.0
ln-UNIX stage/lib/libboost_program_options.so
common.mkdir bin.v2/libs/random
common.mkdir bin.v2/libs/random/build
common.mkdir bin.v2/libs/random/build/gcc-4.6.2
common.mkdir bin.v2/libs/random/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/random/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/random/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/random/build/gcc-4.6.2/release/address-model-32/threading-multi/random_device.o
gcc.link.dll bin.v2/libs/random/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_random.so.1.48.0
common.copy stage/lib/libboost_random.so.1.48.0
ln-UNIX stage/lib/libboost_random.so
common.mkdir bin.v2/libs/serialization
common.mkdir bin.v2/libs/serialization/build
common.mkdir bin.v2/libs/serialization/build/gcc-4.6.2
common.mkdir bin.v2/libs/serialization/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_archive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_iarchive.o
libs/serialization/src/basic_iarchive.cpp: In member function ‘const boost::archive::detail::basic_pointer_iserializer* boost::archive::detail::basic_iarchive_impl::load_pointer(boost::archive::detail::basic_iarchive&, void*&, const boost::archive::detail::basic_pointer_iserializer*, const boost::archive::detail::basic_pointer_iserializer* (*)(const boost::serialization::extended_type_info&))’:
libs/serialization/src/basic_iarchive.cpp:437:23: warning: variable ‘new_cid’ set but not used [-Wunused-but-set-variable]
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_iserializer.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_oarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_oserializer.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_pointer_iserializer.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_pointer_oserializer.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_serializer_map.o
libs/serialization/src/basic_serializer_map.cpp: In member function ‘bool boost::archive::detail::basic_serializer_map::insert(const boost::archive::detail::basic_serializer*)’:
libs/serialization/src/basic_serializer_map.cpp:46:47: warning: variable ‘result’ set but not used [-Wunused-but-set-variable]
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_text_iprimitive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_text_oprimitive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_xml_archive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/binary_iarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/binary_oarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/extended_type_info.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/extended_type_info_typeid.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/extended_type_info_no_rtti.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/polymorphic_iarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/polymorphic_oarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/stl_port.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/text_iarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/text_oarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/void_cast.o
...on 300th target...
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/archive_exception.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_grammar.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_iarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_oarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_archive_exception.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/shared_ptr_helper.o
gcc.link.dll bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_serialization.so.1.48.0
common.copy stage/lib/libboost_serialization.so.1.48.0
ln-UNIX stage/lib/libboost_serialization.so
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_text_wiprimitive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/basic_text_woprimitive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/text_wiarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/text_woarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/utf8_codecvt_facet.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_wgrammar.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_wiarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_woarchive.o
gcc.compile.c++ bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/codecvt_null.o
gcc.link.dll bin.v2/libs/serialization/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_wserialization.so.1.48.0
common.copy stage/lib/libboost_wserialization.so.1.48.0
ln-UNIX stage/lib/libboost_wserialization.so
common.mkdir bin.v2/libs/signals
common.mkdir bin.v2/libs/signals/build
common.mkdir bin.v2/libs/signals/build/gcc-4.6.2
common.mkdir bin.v2/libs/signals/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/trackable.o
gcc.compile.c++ bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/connection.o
gcc.compile.c++ bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/named_slot_map.o
gcc.compile.c++ bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/signal_base.o
gcc.compile.c++ bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/slot.o
gcc.link.dll bin.v2/libs/signals/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_signals.so.1.48.0
common.copy stage/lib/libboost_signals.so.1.48.0
ln-UNIX stage/lib/libboost_signals.so
common.mkdir bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/execution_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/debug.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/cpp_main.o
gcc.link.dll bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_prg_exec_monitor.so.1.48.0
common.copy stage/lib/libboost_prg_exec_monitor.so.1.48.0
ln-UNIX stage/lib/libboost_prg_exec_monitor.so
common.mkdir bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/compiler_log_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/debug.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/execution_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/framework.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/plain_report_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/progress_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/results_collector.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/results_reporter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/test_main.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/test_tools.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/unit_test_log.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/unit_test_main.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/unit_test_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/unit_test_parameters.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/unit_test_suite.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/xml_log_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/xml_report_formatter.o
gcc.archive bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_test_exec_monitor.a
common.copy stage/lib/libboost_test_exec_monitor.a
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/compiler_log_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/exception_safety.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/framework.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/interaction_based.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/logged_expectations.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/plain_report_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/progress_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/results_collector.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/results_reporter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/test_tools.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/unit_test_log.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/unit_test_main.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/unit_test_monitor.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/unit_test_parameters.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/unit_test_suite.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_log_formatter.o
gcc.compile.c++ bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/xml_report_formatter.o
gcc.link.dll bin.v2/libs/test/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_unit_test_framework.so.1.48.0
common.copy stage/lib/libboost_unit_test_framework.so.1.48.0
ln-UNIX stage/lib/libboost_unit_test_framework.so
common.mkdir bin.v2/libs/thread
common.mkdir bin.v2/libs/thread/build
common.mkdir bin.v2/libs/thread/build/gcc-4.6.2
common.mkdir bin.v2/libs/thread/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32/threading-multi
common.mkdir bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32/threading-multi/pthread
gcc.compile.c++ bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32/threading-multi/pthread/thread.o
In file included from libs/thread/src/pthread/thread.cpp:26:0:
libs/thread/src/pthread/timeconv.inl: In function ‘void {anonymous}::to_time(int, boost::xtime&)’:
libs/thread/src/pthread/timeconv.inl:22:9: warning: variable ‘res’ set but not used [-Wunused-but-set-variable]
libs/thread/src/pthread/timeconv.inl: In function ‘void {anonymous}::to_timespec_duration(const boost::xtime&, timespec&)’:
libs/thread/src/pthread/timeconv.inl:59:9: warning: variable ‘res’ set but not used [-Wunused-but-set-variable]
libs/thread/src/pthread/timeconv.inl: In function ‘void {anonymous}::to_duration(boost::xtime, int&)’:
libs/thread/src/pthread/timeconv.inl:90:9: warning: variable ‘res’ set but not used [-Wunused-but-set-variable]
libs/thread/src/pthread/timeconv.inl: In function ‘void {anonymous}::to_microduration(boost::xtime, int&)’:
libs/thread/src/pthread/timeconv.inl:112:9: warning: variable ‘res’ set but not used [-Wunused-but-set-variable]
gcc.compile.c++ bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32/threading-multi/pthread/once.o
gcc.link.dll bin.v2/libs/thread/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_thread.so.1.48.0
common.copy stage/lib/libboost_thread.so.1.48.0
ln-UNIX stage/lib/libboost_thread.so
common.mkdir bin.v2/libs/timer
common.mkdir bin.v2/libs/timer/build
common.mkdir bin.v2/libs/timer/build/gcc-4.6.2
...on 400th target...
common.mkdir bin.v2/libs/timer/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/timer/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/timer/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/timer/build/gcc-4.6.2/release/address-model-32/threading-multi/auto_timers_construction.o
gcc.compile.c++ bin.v2/libs/timer/build/gcc-4.6.2/release/address-model-32/threading-multi/cpu_timer.o
common.mkdir bin.v2/libs/chrono
common.mkdir bin.v2/libs/chrono/build
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/threading-multi/chrono.o
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/threading-multi/thread_clock.o
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/threading-multi/process_cpu_clocks.o
In file included from ./boost/chrono/detail/inlined/process_cpu_clocks.hpp:39:0,
from libs/chrono/src/process_cpu_clocks.cpp:17:
./boost/chrono/detail/inlined/posix/process_cpu_clocks.hpp: In static member function ‘static boost::chrono::process_system_cpu_clock::time_point boost::chrono::process_system_cpu_clock::now()’:
./boost/chrono/detail/inlined/posix/process_cpu_clocks.hpp:218:1: warning: control reaches end of non-void function [-Wreturn-type]
common.mkdir bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/threading-multi/error_code.o
gcc.link.dll bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_system.so.1.48.0
gcc.link.dll bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_chrono.so.1.48.0
gcc.link.dll bin.v2/libs/timer/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_timer.so.1.48.0
common.copy stage/lib/libboost_timer.so.1.48.0
ln-UNIX stage/lib/libboost_timer.so
common.mkdir bin.v2/libs/wave
common.mkdir bin.v2/libs/wave/build
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_cpp_exprgrammar.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_cpp_grammar.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_cpp_literalgrs.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_defined_grammar.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_predef_macros.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_re2c_lexer.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/instantiate_re2c_lexer_str.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/token_ids.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/wave_config_constant.o
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/cpplexer
common.mkdir bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/cpplexer/re2clex
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/cpplexer/re2clex/aq.o
gcc.compile.c++ bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/cpplexer/re2clex/cpp_re.o
common.mkdir bin.v2/libs/date_time
common.mkdir bin.v2/libs/date_time/build
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi/gregorian
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi/gregorian/greg_month.o
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi/gregorian/greg_weekday.o
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi/gregorian/date_generators.o
gcc.link.dll bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_date_time.so.1.48.0
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v2
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v2/src
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v2/src/v2_operations.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v2/src/v2_path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v2/src/v2_portability.o
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/operations.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/portability.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/windows_file_codecvt.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/codecvt_error_category.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/path_traits.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/unique_path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/v3/src/utf8_codecvt_facet.o
gcc.link.dll bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_filesystem.so.1.48.0
gcc.link.dll bin.v2/libs/wave/build/gcc-4.6.2/release/address-model-32/threading-multi/libboost_wave.so.1.48.0
common.copy stage/lib/libboost_wave.so.1.48.0
ln-UNIX stage/lib/libboost_wave.so
common.copy stage/lib/libboost_system.so.1.48.0
ln-UNIX stage/lib/libboost_system.so
common.copy stage/lib/libboost_chrono.so.1.48.0
ln-UNIX stage/lib/libboost_chrono.so
common.copy stage/lib/libboost_date_time.so.1.48.0
ln-UNIX stage/lib/libboost_date_time.so
common.mkdir bin.v2/libs/exception
common.mkdir bin.v2/libs/exception/build
common.mkdir bin.v2/libs/exception/build/gcc-4.6.2
common.mkdir bin.v2/libs/exception/build/gcc-4.6.2/release
common.mkdir bin.v2/libs/exception/build/gcc-4.6.2/release/address-model-32
common.mkdir bin.v2/libs/exception/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/exception/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
gcc.compile.c++ bin.v2/libs/exception/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/clone_current_exception_non_intrusive.o
gcc.archive bin.v2/libs/exception/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_exception.a
common.copy stage/lib/libboost_exception.a
common.copy stage/lib/libboost_filesystem.so.1.48.0
ln-UNIX stage/lib/libboost_filesystem.so
common.mkdir bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
gcc.compile.c++ bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/error_code.o
gcc.archive bin.v2/libs/system/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_system.a
common.copy stage/lib/libboost_system.a
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
...on 500th target...
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/chrono.o
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/thread_clock.o
gcc.compile.c++ bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/process_cpu_clocks.o
In file included from ./boost/chrono/detail/inlined/process_cpu_clocks.hpp:39:0,
from libs/chrono/src/process_cpu_clocks.cpp:17:
./boost/chrono/detail/inlined/posix/process_cpu_clocks.hpp: In static member function ‘static boost::chrono::process_system_cpu_clock::time_point boost::chrono::process_system_cpu_clock::now()’:
./boost/chrono/detail/inlined/posix/process_cpu_clocks.hpp:218:1: warning: control reaches end of non-void function [-Wreturn-type]
gcc.archive bin.v2/libs/chrono/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_chrono.a
common.copy stage/lib/libboost_chrono.a
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
common.mkdir bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/gregorian
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/gregorian/greg_month.o
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/gregorian/greg_weekday.o
gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/gregorian/date_generators.o
gcc.archive bin.v2/libs/date_time/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_date_time.a
common.copy stage/lib/libboost_date_time.a
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v2
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v2/src
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v2/src/v2_operations.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v2/src/v2_path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v2/src/v2_portability.o
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3
common.mkdir bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/operations.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/portability.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/windows_file_codecvt.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/codecvt_error_category.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/path_traits.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/unique_path.o
gcc.compile.c++ bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/v3/src/utf8_codecvt_facet.o
gcc.archive bin.v2/libs/filesystem/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/libboost_filesystem.a
common.copy stage/lib/libboost_filesystem.a
common.mkdir bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static
common.mkdir bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/c_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/cpp_regex_traits.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/cregex.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/fileiter.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/icu.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/instances.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.6.2/release/address-model-32/link-static/threading-multi/posix_api.o
gcc.c

[Solved] Problem installing et-sdl-sound from AUR

Hey All,
Ok now! I know that there are several threads on this forum related to this issue, but the question I have is slightly different and may even sound silly, but I just cannot figure it out.
I tried installing Wolfenstein: Enemy Territory from AUR. The sound didn't work out-of-the-box. Just as expected because the comments against the package on AUR had warned me so: http://aur.archlinux.org/packages.php?ID=2063
When I researched a little I found out that, to make sound work, I had to install et-sdl-sound package: http://aur.archlinux.org/packages.php?ID=9777
So I went ahead and did this:
1. download the tarball from AUR
2. tar -zxvf et-sdl-sound.tar.gz
3. cd et-sdl-sound
4. makepkg -s
Now when I do the "makepkg -s" it fails with the error: "ERROR: A failure occured in build()"
Going by the comments on the package in AUR, adding a line #include <unistd.h> to one of the .cpp file supposedly should fix this error. I did this.
But when I try to run the command makepkg -s it overwrites the file I just modified. Can someone please tell me how do I overcome this? How do I make makepkg use the .cpp file with the modification that I made?
Thank you,
Nachiket
Last edited by Nachiket (2012-06-12 06:04:37)

Perhaps makepkg's man page will have an option to not extract source files; use whatever source already exists in the src/ directory
Last edited by SS4 (2012-06-11 16:14:25)

[SOLVED] How to install custom kernel from AUR?

I am trying to install the custom kernel for the Acer Aspire One from AUR. What is the correct way to go about doing this? I pacman -U the .pkg.tar.gz I downloaded and it put a new kernel folder in /usr/src. Do I just copy the old .config file and make?
Last edited by future stir-fry (2008-12-23 01:26:57)

zaza224 wrote:
After installing new kernel with pacman -U you just need to add a new line to grub menu.lst pointing to it and reboot
How would you go about doing this in syslinux instead of grub?
Whoa there, get your shotguns, the zombies are coming!!
Seriously, welcome to the Arch forums zaza224
Please familiarize yourself with our forum guidelines, in particular the topic about waking the dead:
https://wiki.archlinux.org/index.php/Fo … Bumping.22
Closing.

Installing broadcom-wl driver from AUR

I'm trying to insall broadcom-wl 5.100.82.112-13 from AUR so I can get wirless working on my laptop. I keep getting build errors.
https://aur.archlinux.org/packages/broadcom-wl/
A commentor stated:
The following line has to be inside the build() function; otherwise it's called early before the linux package is installed:
_kernver="$(cat /usr/lib/modules/${_extramodules}/version)"
but I dont know exactly where to amend the file. I'm using yaourt, any help would be appericated. Thanks!

skunktrader wrote:fwiw the unmodified PKGBUILD for broadcom-wl works fine for me. You probably need to post the actual build errors you are seeing.
==> Building and installing package
cat: /usr/lib/modules/extramodules-3.10-ARCH/version: No such file or directory
==> Making package: broadcom-wl 5.100.82.112-13 (Fri Aug 23 03:11:16 CDT 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Downloading hybrid-portsrc_x86_32-v5_100_82_112.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1112k 100 1112k 0 0 531k 0 0:00:02 0:00:02 --:--:-- 532k
-> Found modprobe.d
-> Found license.patch
-> Found linux-recent.patch
==> Validating source files with sha1sums...
hybrid-portsrc_x86_32-v5_100_82_112.tar.gz ... Passed
modprobe.d ... Passed
license.patch ... Passed
linux-recent.patch ... Passed
==> Extracting sources...
-> Extracting hybrid-portsrc_x86_32-v5_100_82_112.tar.gz with bsdtar
==> Starting build()...
patching file Makefile
patching file src/include/bcmutils.h
patching file src/wl/sys/wl_cfg80211.c
patching file src/wl/sys/wl_iw.h
patching file src/wl/sys/wl_linux.c
patching file src/wl/sys/wl_linux.c
Hunk #1 succeeded at 244 (offset 4 lines).
make: *** /usr/lib/modules//build: No such file or directory. Stop.
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build broadcom-wl.
The failure is occuring in the build () stage

[How - to] Install in a click from AUR webpages

Here I little hack I coded to install packages directly from the AUR frontend.
Needed:
- yaourt
- Firefox with greasemonkey (https://addons.mozilla.org/addon/748) or any greasemonkey-scripts accepting browser.
Steps:
1. Create a small bash script called aur_opener.sh containing the following code:
#!/usr/bin/env bash
gnome-terminal -x /usr/bin/yaourt -S ${1//aur:\/\//}
2. Make the script executable
3. Open about:config in Firefox and add the following variable:
network.protocol-handler.app.aur
with value:
yaourt
4. Install the greasemonkey script AURlizer (http://userscripts.org/scripts/show/61015).
5. Visit any page on the AUR db. A new symbol [↓] will appear next to the package name. Click on it and you will be asked which program to use. Point Firefox to wherever aur_opener.sh is. install!
Note.
From now on, every time you click on a link like the following: aur://pkgname yaourt will start.
Enjoy.
PS
(Obviously, it would be very easy to implement this directly into yaourt / the AUR db )
Last edited by crocowhile (2009-11-01 17:43:38)

One click away from disaster... yaaaah.
Nice job figuring out though. If only I could one click hot dogs.
Last edited by Gen2ly (2009-11-02 10:08:06)

Errors installing virtualbox guest additions from AUR

After failing to get ose guest additions working in an Arch guest on Ubuntu host by (a) mounting the ISO and (b) installing from pacman, I thought that it would be an idea to use builds from AUR as these would likely to be more customised for Arch guests.
Installing ose-guest-additions-modules (the dependency for ose-guest-additions) worked flawlessly, but whenever I try and makepkg -s for ose-guest-additions I get the following error:
install: cannot stat 'vboxadd-timesync' : no such file or directory
install: cannot stat 'VBoxClient' : no such file or directory
install: cannot stat 'mountvboxsf' : no such file or directory
These directories do exist at /usr/share/virtualbox/additions/ so I am at a loss as to what is causing this to fail.
(It is worth pointing out that I am new to Arch -and relatively new to Linux- & while I am having a lot of fun trying to figure this stuff out, I am aware that I am probably missing something quite obvious...)

bump
Last edited by Mufasaa (2015-06-12 13:04:45)

[Solved] Install package python-evdev from AUR

I belive this is the correct section to post this but I have a problem installing the package python-evdev where I get the error ( Unsupported package: Potentially dangerous ! )
after trying to install with yaourt and pip install python-evdev results in bash: pip: command not found even after checking that extra/python-setuptools 1:5.2-1 is installed
and extra/python2-setuptools 1:5.2-1 is installed.
I realize there are other modules for hooking x server events but this one I have already written 200 lines of code for and is key to my application working. I was able to install
and utilize this module in ubuntu but cannot seem to get it installed in archlinux. Any guidance would be apreciated.
Last edited by meschael (2014-06-25 00:34:58)

I asumed pip came with setup tools, so following ids1024's lead I did a pacman -S python-pip which solved the command not found issue. I downloaded and untar'ed the package from AUR and issued a makepkg -s from within the extracted folder. There seems to be an issue with the licence which I can now see has to do with the person who make the package
I did not realize the dynamics of how AUR works because I am new to arch, so I appologize if I bothered anyone.
[Update] I have abondoned the idea of getting pythons evdev module installed as I have located a python3-xlib module which seems to have installed correctly, incidently I was unable to locate a xlib ported to python3 in my other distro, but found it in AUR here so this should work, will have to adapt my code but not the end of the world. Else if (Xlib != WORKING): work directly with /dev/input/eventn using root
Last edited by meschael (2014-06-25 00:34:03)

[solved]Compile kernel from aur consumes time than from source?

With my box from source take 1-1,5 minutes and from aur take ~1h, anyone can explain this situation? thanks.
Last edited by angelfalls (2012-11-12 02:59:25)

tks falconindy, i will look into it later.

[SOLVED] cannot install from AUR

as I was updating a kernel from AUR, I lost power during the build and now aurget, packer, and yaourt doesn't seem to work...
these are the errors with an example of each:
$ aurget -S calf-git
searching AUR...
Targets (1): calf-git-20100827-1
Proceed with installation? [Y/n]
:: Retrieving source tarball from AUR...
--2010-11-22 18:20:36-- http://aur.archlinux.org/packages/calf- … git.tar.gz
Resolving aur.archlinux.org... failed: Name or service not known.
wget: unable to resolve host address "aur.archlinux.org"
error: failed to retrieve aur sources
packer -S kernel26-lqx
Aur Targets (1): kernel26-lqx
Proceed with installation? [Y/n]
tar: This does not look like a tar archive
gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Error is not recoverable: exiting now
/usr/bin/packer: line 273: cd: kernel26-lqx: No such file or directory
No PKGBUILD found in directory.
$ yaourt -S traverso
curl error: Couldn't resolve host name
only yaourt gave the curl error... I think that curl was updated around that time... any idea?
Last edited by funkmuscle (2010-11-25 02:47:06)

web browsing is fine.. pacman works so don't know what else I can do..
when I ping AUR, I get:
ping aur.archlinux.org
PING aur.archlinux.org (208.92.232.29) 56(84) bytes of data.
64 bytes from sigurd.archlinux.org (208.92.232.29): icmp_seq=1 ttl=57 time=243 ms
64 bytes from sigurd.archlinux.org (208.92.232.29): icmp_seq=2 ttl=57 time=33.2 ms
64 bytes from sigurd.archlinux.org (208.92.232.29): icmp_seq=3 ttl=57 time=32.7 ms
64 bytes from sigurd.archlinux.org (208.92.232.29): icmp_seq=4 ttl=57 time=47.4 ms
funny, packer updates the main repos:
packer -Syyu
Password:
:: Synchronizing package databases...
core 35.8K 195.1K/s 00:00:00 [###########################] 100%
extra 449.0K 438.6K/s 00:00:01 [###########################] 100%
community 405.7K 378.7K/s 00:00:01 [###########################] 100%
multilib 21.8K 165.3K/s 00:00:00 [###########################] 100%
:: Synchronizing aur database...
aur 98 98 [#############################] 100%
:: Starting full aur upgrade...
it installed one package but not all that was available for update.
Last edited by funkmuscle (2010-11-24 03:49:20)

[SOLVED]_How can I execute namebench installed from AUR?

I have managed to install my first package from AUR, namebench. When i type in terminal
namebench
I get command not found.
So how can I execute namebench?
Thanks
Last edited by zabrielza (2015-03-09 21:26:36)

nullified wrote:What did you do to install it? I.e. are you sure you installed it correctly?
I followed instructions from this link.
$ cd ~***/Downloads/_Applications_From_AUR
$ tar -xvf namebench.tar.gz
After that
$ cd namebench
$ nano PKGBUILD
When I read PKGBUILD there were dendencies tha I installed correctly. python2-graphy was installed from AUR too.
$ makepkg -s
# pacman -U namebench-1.3.1-7-any.pkg.tar.xz
I had no errors at all.
EDIT: How can I figure out whether I installed it correctly or not?
Last edited by zabrielza (2015-03-09 21:15:57)

Acer C710 - USB Ports not working with patched kernel

I have an...
Acer C710-844G01ii
I have replaced the original SSD with a Mushkin 120GB SSD (MKNSSDCR120GB-7)
I've used John Lewis' script at https://johnlewis.ie to flash the firmware. It works great. It loads 64 bit dual arch iso (2014.10.01) written to a USB flashdrive (Well, I'm actually using SD card in a USB reader. Not sure if that makes a difference) without having to utilize the workaround listed on the Chromebook wiki page (https://wiki.archlinux.org/index.php/Ch … stallation). I just create a regular arch bootable usb and it seems to work fine. I can use the bootable USB tools. I can install arch to the hard disk fine. (I did this a couple of times on the original SSD that came with the chromebook before I replaced it, so I know it works without having to change the SSD).
The problem I'm having occurs after I install the patched kernel (linux-chromebook-3.16.4-1-x86_64 or linux-mainline-chromebook-3.17-1-x86_64 I've tried them both. Both times I wiped the hard drive and went through the entire install process from scratch). After booting, everything loads up fine except that I lose functionality of my USB ports. The custom BIOS still reads the arch bootable USB if I choose to boot into it. If I boot from the hard drive though, as soon as the patched kernel loads, the USB ports are not working.
The output of
dmesg | tail
is the same before and after inserting a flash drive into a usb port.
Running the command
lsusb
gives output
unable to initialize libusb: -99

Updated the system, now using arch kernel 3.17.1-1
Problem still exists.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acee3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000acee4000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Google Parrot/Parrot, BIOS 4.0-6588-g4acd8ea-dirty 09/04/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable
[ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xacee4 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[ 0.000000] [mem 0x14f400000-0x14f5fffff] page 2M
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[ 0.000000] [mem 0x14c000000-0x14f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[ 0.000000] [mem 0x100000000-0x14bffffff] page 2M
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xacee3fff]
[ 0.000000] [mem 0x40200000-0xacdfffff] page 2M
[ 0.000000] [mem 0xace00000-0xacee3fff] page 4k
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x379a0000-0x37cc7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6DD0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000ACFEF0E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000ACFF2720 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20140724/tbfadt-618)
[ 0.000000] ACPI: DSDT 0x00000000ACFEF250 0034C7 (v02 COREv4 COREBOOT 20110725 INTL 20140114)
[ 0.000000] ACPI: FACS 0x00000000ACFEF210 000040
[ 0.000000] ACPI: HPET 0x00000000ACFF2820 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000ACFF2860 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG 0x00000000ACFF28C0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000ACFF3900 000818 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
[ 0.000000] NODE_DATA [mem 0x14f5fa000-0x14f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x14f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xacee3fff]
[ 0.000000] node 0: [mem 0x100000000-0x14f5fffff]
[ 0.000000] On node 0 totalpages: 1032322
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 158 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10988 pages used for memmap
[ 0.000000] DMA32 zone: 703204 pages, LIFO batch:31
[ 0.000000] Normal zone: 5080 pages used for memmap
[ 0.000000] Normal zone: 325120 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xacee4000-0xaf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88014f200000 s86848 r8192 d23744 u1048576
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016032
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3981852K/4129288K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 147436K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:8448 nr_irqs:440 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1097.469 MHz processor
[ 0.000073] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.39 BogoMIPS (lpj=3658230)
[ 0.000078] pid_max: default: 32768 minimum: 301
[ 0.000089] ACPI: Core revision 20140724
[ 0.005690] ACPI: All ACPI Tables successfully acquired
[ 0.008808] Security Framework initialized
[ 0.008819] Yama: becoming mindful.
[ 0.009391] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011193] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012001] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.012017] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.012360] Initializing cgroup subsys memory
[ 0.012370] Initializing cgroup subsys devices
[ 0.012374] Initializing cgroup subsys freezer
[ 0.012378] Initializing cgroup subsys net_cls
[ 0.012382] Initializing cgroup subsys blkio
[ 0.012420] CPU: Physical Processor ID: 0
[ 0.012422] CPU: Processor Core ID: 0
[ 0.012432] mce: CPU supports 7 MCE banks
[ 0.012454] CPU0: Thermal monitoring enabled (TM1)
[ 0.012472] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.012675] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[ 0.014781] ftrace: allocating 20674 entries in 81 pages
[ 0.037109] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070117] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (fam: 06, model: 2a, stepping: 07)
[ 0.070132] TSC deadline timer enabled
[ 0.070178] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.070223] ... version: 3
[ 0.070226] ... bit width: 48
[ 0.070228] ... generic registers: 8
[ 0.070230] ... value mask: 0000ffffffffffff
[ 0.070232] ... max period: 0000ffffffffffff
[ 0.070234] ... fixed-purpose events: 3
[ 0.070237] ... event mask: 00000007000000ff
[ 0.090307] x86: Booting SMP configuration:
[ 0.090312] .... node #0, CPUs: #1
[ 0.103535] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.103559] x86: Booted up 1 node, 2 CPUs
[ 0.103563] smpboot: Total of 2 processors activated (4391.78 BogoMIPS)
[ 0.105926] devtmpfs: initialized
[ 0.112736] pinctrl core: initialized pinctrl subsystem
[ 0.112812] RTC time: 0:25:43, date: 10/27/14
[ 0.112986] NET: Registered protocol family 16
[ 0.113224] cpuidle: using governor ladder
[ 0.113230] cpuidle: using governor menu
[ 0.113291] ACPI: bus type PCI registered
[ 0.113295] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.113438] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.113443] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.113650] PCI: Using configuration type 1 for base access
[ 0.124189] ACPI: Added _OSI(Module Device)
[ 0.124193] ACPI: Added _OSI(Processor Device)
[ 0.124196] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.124199] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.130313] ACPI: Interpreter enabled
[ 0.130327] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.130336] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.130364] ACPI: (supports S0 S3 S4 S5)
[ 0.130367] ACPI: Using IOAPIC for interrupt routing
[ 0.130407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.136949] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.136960] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.137053] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.137240] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[ 0.137249] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.137502] PCI host bridge to bus 0000:00
[ 0.137507] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.137512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.137515] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.137519] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.137523] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.137526] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.137529] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.137533] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.137536] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.137540] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.137543] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.137547] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.137550] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.137553] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.137557] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.137560] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.137564] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
[ 0.137567] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.137583] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.137752] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[ 0.137774] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.137786] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.137796] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 0.138004] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.138046] pci 0000:00:16.0: reg 0x10: [mem 0xe0706100-0xe070610f 64bit]
[ 0.138188] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.138353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.138392] pci 0000:00:1a.0: reg 0x10: [mem 0xe0705800-0xe0705bff]
[ 0.138555] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.138624] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.138714] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.138746] pci 0000:00:1b.0: reg 0x10: [mem 0xe0700000-0xe0703fff 64bit]
[ 0.138900] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.138967] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.139051] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[ 0.139207] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.139354] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[ 0.139506] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.139671] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.139708] pci 0000:00:1d.0: reg 0x10: [mem 0xe0705c00-0xe0705fff]
[ 0.139869] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.139938] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.140021] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
[ 0.140331] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.140373] pci 0000:00:1f.2: reg 0x10: [io 0x1060-0x1067]
[ 0.140391] pci 0000:00:1f.2: reg 0x14: [io 0x1070-0x1073]
[ 0.140409] pci 0000:00:1f.2: reg 0x18: [io 0x1068-0x106f]
[ 0.140427] pci 0000:00:1f.2: reg 0x1c: [io 0x1074-0x1077]
[ 0.140444] pci 0000:00:1f.2: reg 0x20: [io 0x1040-0x105f]
[ 0.140461] pci 0000:00:1f.2: reg 0x24: [mem 0xe0705000-0xe07057ff]
[ 0.140568] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.140707] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.140738] pci 0000:00:1f.3: reg 0x10: [mem 0xe0706000-0xe07060ff 64bit]
[ 0.140781] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.140941] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.140981] pci 0000:00:1f.6: reg 0x10: [mem 0xe0704000-0xe0704fff 64bit]
[ 0.141361] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
[ 0.141432] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
[ 0.141586] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
[ 0.141772] pci 0000:01:00.0: supports D1 D2
[ 0.141776] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.146966] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.146982] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.147186] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
[ 0.147261] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit pref]
[ 0.147314] pci 0000:02:00.0: reg 0x18: [mem 0xe0510000-0xe051ffff 64bit pref]
[ 0.147412] pci 0000:02:00.0: reg 0x30: [mem 0xe0600000-0xe06007ff pref]
[ 0.147646] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.147839] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.147913] pci 0000:02:00.1: reg 0x10: [mem 0xe0520000-0xe052ffff 64bit pref]
[ 0.148270] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.153657] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.153672] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
[ 0.153686] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
[ 0.153903] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.153995] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.154081] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.154165] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[ 0.154248] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.154330] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.154413] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.154495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.155375] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.155452] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.155654] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.155658] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.155664] vgaarb: loaded
[ 0.155666] vgaarb: bridge control possible 0000:00:02.0
[ 0.155751] PCI: Using ACPI for IRQ routing
[ 0.159478] PCI: pci_cache_line_size set to 64 bytes
[ 0.159577] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.159581] e820: reserve RAM buffer [mem 0xacee4000-0xafffffff]
[ 0.159584] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[ 0.159796] NetLabel: Initializing
[ 0.159799] NetLabel: domain hash size = 128
[ 0.159801] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.159829] NetLabel: unlabeled traffic allowed by default
[ 0.159874] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.159885] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.161931] Switched to clocksource hpet
[ 0.171668] pnp: PnP ACPI init
[ 0.171847] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.171852] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.171857] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.171861] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.171865] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.171869] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.171873] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.171877] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.171881] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[ 0.171885] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[ 0.171891] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172584] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.172590] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.172671] system 00:02: [io 0x0500-0x057f] could not be reserved
[ 0.172676] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.172681] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172727] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.172802] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.172844] pnp: PnP ACPI: found 5 devices
[ 0.181140] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.181153] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.181169] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.181179] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
[ 0.181187] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
[ 0.181201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.181205] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.181209] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.181212] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.181216] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.181219] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.181223] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.181226] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.181230] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.181233] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.181237] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.181240] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.181243] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.181247] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.181250] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.181254] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xfebfffff]
[ 0.181257] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
[ 0.181262] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.181266] pci_bus 0000:02: resource 1 [mem 0xe0600000-0xe06fffff]
[ 0.181269] pci_bus 0000:02: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
[ 0.181319] NET: Registered protocol family 2
[ 0.181671] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.181835] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.181980] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.182017] TCP: reno registered
[ 0.182031] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.182066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.182162] NET: Registered protocol family 1
[ 0.182192] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.182773] PCI: CLS 64 bytes, default 64
[ 0.182860] Unpacking initramfs...
[ 0.302677] Freeing initrd memory: 3232K (ffff8800379a0000 - ffff880037cc8000)
[ 0.302693] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.302698] software IO TLB [mem 0xa8ee4000-0xacee4000] (64MB) mapped at [ffff8800a8ee4000-ffff8800acee3fff]
[ 0.302960] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.303038] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 0.303051] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 0.303148] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.303201] Scanning for low memory corruption every 60 seconds
[ 0.303637] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.303657] Initialise system trusted keyring
[ 0.304287] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.307213] zpool: loaded
[ 0.307219] zbud: loaded
[ 0.307572] VFS: Disk quotas dquot_6.5.2
[ 0.307644] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.307867] msgmni has been set to 7783
[ 0.307975] Key type big_key registered
[ 0.308262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.308317] io scheduler noop registered
[ 0.308322] io scheduler deadline registered
[ 0.308380] io scheduler cfq registered (default)
[ 0.308697] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.308978] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.309161] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.309165] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.309172] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.309208] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.309212] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.309215] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 0.309223] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.309253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.309285] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.309344] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.309346] vesafb: scrolling: redraw
[ 0.309350] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.309380] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
[ 0.315773] Console: switching to colour frame buffer device 170x48
[ 0.321847] fb0: VESA VGA frame buffer device
[ 0.321882] intel_idle: MWAIT substates: 0x21120
[ 0.321884] intel_idle: v0.4 model 0x2A
[ 0.321887] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.322122] GHES: HEST is not enabled!
[ 0.322261] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.323099] Linux agpgart interface v0.103
[ 0.323175] rtc_cmos 00:03: RTC can wake from S4
[ 0.323405] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.323444] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.323464] Intel P-state driver initializing.
[ 0.323700] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.323974] TCP: cubic registered
[ 0.324249] NET: Registered protocol family 10
[ 0.324810] NET: Registered protocol family 17
[ 0.325630] Loading compiled-in X.509 certificates
[ 0.325667] registered taskstats version 1
[ 0.326469] Magic number: 2:425:406
[ 0.326624] rtc_cmos 00:03: setting system clock to 2014-10-27 00:25:43 UTC (1414369543)
[ 0.326771] PM: Hibernation image not present or could not be loaded.
[ 0.328979] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[ 0.328984] Write protecting the kernel read-only data: 8192k
[ 0.334234] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
[ 0.336362] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 0.352574] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.355532] systemd-udevd[47]: starting version 216
[ 0.387858] ACPI: bus type USB registered
[ 0.387913] usbcore: registered new interface driver usbfs
[ 0.387936] usbcore: registered new interface driver hub
[ 0.388039] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.388042] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.391270] usbcore: registered new device driver usb
[ 0.392129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.392223] sdhci: Secure Digital Host Controller Interface driver
[ 0.392228] sdhci: Copyright(c) Pierre Ossman
[ 0.392414] ehci-pci: EHCI PCI platform driver
[ 0.392656] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.392671] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.392674] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[ 0.392714] ehci-pci 0000:00:1a.0: debug port 2
[ 0.393158] sdhci-pci 0000:02:00.1: No vmmc regulator found
[ 0.393163] sdhci-pci 0000:02:00.1: No vqmmc regulator found
[ 0.395522] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
[ 0.397372] SCSI subsystem initialized
[ 0.400613] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.400649] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0705800
[ 0.402598] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.402906] libata version 3.00 loaded.
[ 0.408631] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.408994] hub 1-0:1.0: USB hub found
[ 0.409010] hub 1-0:1.0: 3 ports detected
[ 0.409474] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.409486] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.409509] ehci-pci 0000:00:1d.0: debug port 2
[ 0.413433] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.413449] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0705c00
[ 0.421967] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.422311] hub 2-0:1.0: USB hub found
[ 0.422325] hub 2-0:1.0: 3 ports detected
[ 0.422611] ahci 0000:00:1f.2: version 3.0
[ 0.422819] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 0.422858] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.422890] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.422896] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 0.425306] scsi host0: ahci
[ 0.427777] scsi host1: ahci
[ 0.430423] scsi host2: ahci
[ 0.431139] scsi host3: ahci
[ 0.431256] ata1: SATA max UDMA/133 abar m2048@0xe0705000 port 0xe0705100 irq 26
[ 0.431260] ata2: DUMMY
[ 0.431262] ata3: DUMMY
[ 0.431265] ata4: DUMMY
[ 0.475720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.715469] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.748738] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.760911] ata1.00: ATA-8: MKNSSDCR120GB-7, 582ABBF0, max UDMA/133
[ 0.760921] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.770881] ata1.00: configured for UDMA/133
[ 0.771363] scsi 0:0:0:0: Direct-Access ATA MKNSSDCR120GB-7 BBF0 PQ: 0 ANSI: 5
[ 0.782066] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.782627] sd 0:0:0:0: [sda] Write Protect is off
[ 0.782637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.782810] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.785152] sda: sda1 sda2 sda3
[ 0.786014] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.839907] hub 1-1:1.0: USB hub found
[ 0.840119] hub 1-1:1.0: 4 ports detected
[ 0.935913] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.945475] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.069643] hub 2-1:1.0: USB hub found
[ 1.069827] hub 2-1:1.0: 4 ports detected
[ 1.148949] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.233928] usb 1-1.1: string descriptor 0 read error: -22
[ 1.290134] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 1.305272] tsc: Refined TSC clocksource calibration: 1097.506 MHz
[ 1.315437] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 1.344309] systemd-udevd[136]: starting version 216
[ 1.352295] systemd-journald[119]: Received request to flush runtime journal from PID 1
[ 1.607498] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.610413] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.610471] ACPI: Lid Switch [LID0]
[ 1.610565] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.610572] ACPI: Power Button [PWRB]
[ 1.610653] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.610657] ACPI: Sleep Button [TPAD]
[ 1.610758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.610763] ACPI: Power Button [PWRF]
[ 1.626490] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
[ 1.645724] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.645942] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.653739] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.653745] ACPI: Thermal Zone [THRM] (0 C)
[ 1.660772] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 1.665282] ACPI: Battery Slot [BATX] (battery present)
[ 1.666038] ACPI: AC Adapter [AC] (on-line)
[ 1.681337] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140724/utaddress-258)
[ 1.681351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.681358] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
[ 1.681364] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.681367] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
[ 1.681374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.681376] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
[ 1.681382] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.681385] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.688249] [drm] Initialized drm 1.1.0 20060810
[ 1.691201] pps_core: LinuxPPS API ver. 1 registered
[ 1.691207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.700706] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 1.701200] PTP clock support registered
[ 1.706524] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 1.752871] tg3.c:v3.137 (May 11, 2014)
[ 1.753314] Adding 8167872k swap on /dev/sda2. Priority:-1 extents:1 across:8167872k SSFS
[ 1.757127] Bluetooth: Core ver 2.19
[ 1.757151] NET: Registered protocol family 31
[ 1.757154] Bluetooth: HCI device and connection manager initialized
[ 1.757166] Bluetooth: HCI socket layer initialized
[ 1.757170] Bluetooth: L2CAP socket layer initialized
[ 1.757180] Bluetooth: SCO socket layer initialized
[ 1.771585] usbcore: registered new interface driver btusb
[ 1.771864] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[ 1.777240] cfg80211: Calling CRDA to update world regulatory domain
[ 1.812626] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 1.812635] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.812640] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 1.812643] sound hdaudioC0D0: mono: mono_out=0x0
[ 1.812646] sound hdaudioC0D0: inputs:
[ 1.812650] sound hdaudioC0D0: Internal Mic=0x1b
[ 1.812654] sound hdaudioC0D0: Mic=0x19
[ 1.819178] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:c7:a0:92
[ 1.819187] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 1.819192] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.819196] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 1.834640] media: Linux media interface: v0.10
[ 1.845475] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input7
[ 1.849543] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.850477] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 1.850623] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1.851058] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 1.851353] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 1.860140] iTCO_vendor_support: vendor-support=0
[ 1.861704] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.861764] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 1.862721] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.863690] Linux video capture interface: v2.00
[ 1.875723] usbcore: registered new interface driver ath3k
[ 1.914247] tg3 0000:02:00.0 enp2s0f0: renamed from eth0
[ 1.926001] systemd-udevd[145]: renamed network interface eth0 to enp2s0f0
[ 1.938186] usb 1-1.1: USB disconnect, device number 3
[ 1.944872] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
[ 1.953353] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[ 1.953679] usbcore: registered new interface driver uvcvideo
[ 1.953684] USB Video Class driver (1.1.1)
[ 1.997073] intel_rapl: Found RAPL domain package
[ 1.997080] intel_rapl: Found RAPL domain core
[ 1.997083] intel_rapl: Found RAPL domain uncore
[ 1.999325] [drm] Memory usable by graphics device = 2048M
[ 1.999330] [drm] Replacing VGA console driver
[ 1.999337] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[ 1.999340] fb: switching to inteldrmfb from VESA VGA
[ 1.999399] Console: switching to colour dummy device 80x25
[ 2.006114] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 2.006130] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.006133] [drm] Driver supports precise vblank timestamp query.
[ 2.006275] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.010165] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-0067/input/input14
[ 2.014824] mousedev: PS/2 mouse device common for all mice
[ 2.037823] ath: phy0: ASPM enabled: 0x43
[ 2.037831] ath: EEPROM regdomain: 0x6c
[ 2.037834] ath: EEPROM indicates we should expect a direct regpair map
[ 2.037838] ath: Country alpha2 being used: 00
[ 2.037840] ath: Regpair used: 0x6c
[ 2.044014] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.044617] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90004980000, irq=17
[ 2.050867] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
[ 2.054438] fbcon: inteldrmfb (fb0) is primary device
[ 2.054543] Console: switching to colour frame buffer device 170x48
[ 2.054559] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.054563] i915 0000:00:02.0: registered panic notifier
[ 2.066878] systemd-udevd[145]: renamed network interface wlan0 to wlp1s0
[ 2.070905] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 2.125455] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[ 2.154830] tg3 0000:02:00.0: irq 30 for MSI/MSI-X
[ 2.154842] tg3 0000:02:00.0: irq 31 for MSI/MSI-X
[ 2.154849] tg3 0000:02:00.0: irq 32 for MSI/MSI-X
[ 2.714571] Switched to clocksource tsc
[ 2.714588] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
[ 2.731648] usb 1-1.1: string descriptor 0 read error: -22
[ 2.850571] random: nonblocking pool is initialized
lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b336 Chicony Electronics Co., Ltd
Bus 001 Device 005: ID 0489:e04e Foxconn / Hon Hai
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[SOLVED] Enabling debug for ath9k in compat-drivers-patched from AUR

Wireless card: TP-LINK TL-WN951N. lspci says that it is an Atheros AR5416 adapter [AR5008].
Some background: I'm having the same issues as the OP in this thread, which references this bug report. The problem is that I get a 2000 ms ping every 30 seconds. So 2 seconds of inactivity every 30 seconds. I have the same wireless PCI card, as well. I need to fix this, because it's making online gaming impossible. I should also note that the card is working just fine in Windows 8, however. I am using net-auto-wireless. I have tried using wicd, enabling ath9k's nohwcrypt option, toggling the card's power save, installing the latest compat-drivers-patched from the AUR, toggling different settings in my motherboard's BIOS, and removing the antennae from the card. But nothing has made a significant difference.
I think I'm really close now. I just have to disable ANI. But in order to do that, it seems that I need to enable debugging for ath9k. But this means that I need to either recompile a custom kernel, or somehow enable debug for ath9k in compat-drivers-patched from the AUR. I'd prefer the latter, as that means that I will have a more bleeding-edge driver. That, and I won't have to touch the kernel as much. What I want is described on this page. But it seems too complicated to me. Please let me explain.
I've installed things from the AUR before, as mentioned above, and have properly configured my makepkg.conf for my system. So I'd like to use the CFLAGS and such that I've set. I don't understand how everything works in the PKGBUILD; I don't have much experience with sed and awk and regular expressions, and haven't done much shell scripting at all. It seems that at some point in the PKGBUILD, I need to enable debugging for ath9k before it is compiled. Apparently on the last page I linked to, I need to add:
export CONFIG_ATH_DEBUG=y
export CONFIG_ATH9K_DEBUG=y
export CONFIG_ATH9K_DEBUGFS=y
to some config.mk file. I can only get access to the config.mk file after I install the package with pacman. I've tried adding those lines to my /etc/profile file, and checked, after a reboot, with "set", that those variables are indeed set. But the thing is, with these variables set in /etc/profile, when I run makepkg, makepkg fails with an error 2. I tried again and got the same error. I removed those lines from my /etc/profile, rebooted, tried makepkg again, and everything worked. So putting those lines in my /etc/profile is not the solution, and I feel like I'm doing something very stupid. What am I doing wrong?
I should also note that I've tried to read the wiki page on compiling a custom kernel using ABS, but it seems to just say "get your custom configuration files" and then just continue (so it assumes that I should already be familiar with the configuration part). The PKGBUILD and Creating Packages wiki pages also seem to be a little... too advanced for me at this point in time.
So how do I enable debugging for ath9k in compat-drivers-patched from the AUR? I'd prefer to stick with only editing the PKGBUILD and using makepkg, if possible.
I've really tried to search the web and the arch forums on how to fix this problem myself, but alas, it seems that I need help this time. I greatly appreciate your time for reading my long post.
UPDATE:
I've made a lot of progress. I ended up removing the AUR package with pacman by invoking "pacman -Rsn compat-drivers-patched".
Instructions for [almost] success: First, download compat-drivers-patched from AUR. Then move it to the "builds" directory (or "local", if using ABS). Extract the tarball. After the new directory is created, cd into it. Now here's the important part: run
$ makepkg -so
Then cd into src, cd into the directory inside src, then edit the config.mk file. Make sure these lines are uncommented (or created, if not already there):
export CONFIG_CFG80211_DEBUGFS=y
export CONFIG_MAC80211_DEBUGFS=y
export CONFIG_ATH_DEBUG=y
export CONFIG_ATH9K_DEBUG=y
export CONFIG_ATH9K_DEBUGFS=y
(source)
Now run "cd ../.." to go back up two directories. Now run:
$ makepkg -e
# pacman -U <file that was produced>
And I ran "mkinitcpio -p linux" just in case, but I'm not sure if that is necessary at all. I'm... not touching the kernel, right?
Now I ran:
echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani
But bash would say that the file or directory doesn't exist. Even if I prepend it with "sudo", I get the same results. I was only able to get the command to work if I logged in as root. I even put the line in my /etc/profile. The 2000 ms ping every 30 seconds is now GONE. HOWEVER! If I reboot and log in as a normal user, the problem is there again. If I reboot and log in as root, the problem is gone. If I then log out and then log back in as a normal user, the problem does not come back.
So really, I can avoid the problem if I first log in as root, log out, and then log back in as a normal user. But this is a great inconvenience. I would much prefer if I could just log in as a normal user right after boot, and have everything working.
Now, how do I get the command to automatically run at boot as root (without me having to log in as root), and work?
UPDATE 2:
I got it working. Putting the line in /etc/profile is not the solution. I created a custom systemd .service file.
Put this into /etc/systemd/service (name it "disable_ani.service"):
EDIT: Wow. I made a glaring typo here. It should be /etc/systemd/system/disable_ani.service
[Unit]
Description=disable_ani
[Service]
Type=oneshot
ExecStart=/bin/sh -c "echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani"
[Install]
WantedBy=multi-user.target
Then make sure to "sudo chmod 755 /etc/systemd/service/disable_ani.service", since root owns this file.
Then run "sudo systemctl enable disable_ani.service".
EDIT: It has been brought to my attention that there is a much simpler way than creating a custom service.
Using a tmpfile:
/etc/tmpfiles.d/disable_ani.conf
w /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani - - - - 1
Done.
Now ANI is persistently disabled between boots, even if I log in as a normal user right after boot.
Thanks for reading.
Last edited by vyu223 (2013-03-12 10:20:19)

So zsh is telling you that the command didn't work, since it claims that there is no such file or directory. I had a lot of trouble with getting the echo command to work, as well. I found that if out of these lines:
export CONFIG_CFG80211_DEBUGFS=y
export CONFIG_MAC80211_DEBUGFS=y
export CONFIG_ATH_DEBUG=y
export CONFIG_ATH9K_DEBUG=y
export CONFIG_ATH9K_DEBUGFS=y
If the first and second line above were not uncommented in the config.mk file, I couldn't leave the last line above uncommented as well, or else makepkg would fail and give me an error. So originally I had only the 3rd and 4th lines above uncommented/inserted in my config.mk. With that configuration, I could not get the echo command to work, no matter what. Have you uncommented or inserted all of the above 5 lines into your config.mk?
After making sure all of the above 5 lines were in my config.mk, the echo command still didn't work, even if I preceded the command with sudo, or entered a su session. Bash would tell me that there was no such file or directory. I found that if I actually logged out of my normal user, and then logged back into the computer as root, the command would work. If your shell does not give you any feedback (particularly, "no such file or directory"), then the command worked. In order to get the command to run every time the computer boots, I used a systemd service, so that the command is issued as root. For some reason, it doesn't work if you put the command into /etc/profile.
Oh, and it would probably be helpful to mention that for the compat-drivers-patched package from the AUR, the PKGBUILD checks to see what your _selected_drivers variable is before compilation. If you set _selected_drivers=ath9k, your compile times will be much shorter.

[SOLVED] Kernels from the AUR not compiling properly

Hiya everyone,
I've got a bit of a problem, I think. Early this evening I tried downloading and making the Linux-lqx kernel from the AUR. Largely because why not.
After the tarball downloaded, I ran tar -xvf on it like I always do, ran namcap on the PKGBUILD (it came up with a few superfluous errors), and ran makepkg -s on the PKGBUILD. It downloaded the relevant source, then immediately failed the PGP signature check. I was like, "Oh you AUR!" and ran makepkg -s --skippgpcheck. It did it's thing until it was applying patches, at which point it just failed at a certain point with "ERROR: A failure occured in prepare()", and aborted. I reported the error and the lines that preceded it in the package's page in the AUR.
I got suspicious, and tried the Linux-lbre-xen kernel to test the building of it. Same issue: a prepare() error. Baffled, I thought maybe my building system was broken. I recompiled a few packages I had already built and installed successfully, and they were fine. I grabbed a few more tarballs from the AUR: adobe-air, I think jre, and something else. They all compiled great and installed just fine. Confused, I then tried building Linux-ck. Another prepare() error!
Then I noticed the line that preceded the error, "patching file virt/kvm/kvm_main.c", then the error. Going back to lqx and libre-xen, I tried compiling them again, and sure enough "patching file virt/kvm/kvm_main.c" directly preceded the prepare() error.
What's going on here? Strangely, every kernel I try from the AUR fails the PGP signature check, too. Just the kernels - everything else works as expected. Am I missing something?
Last edited by MrEvilBreakfast (2015-05-24 18:59:02)

The build goes fine until:
==> Starting prepare()...
The next patch would create the file Documentation/ABI/testing/debugfs-aufs,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/ABI/testing/sysfs-aufs,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
The next patch would create the file Documentation/filesystems/aufs/README,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/01intro.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/02struct.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/03atomic_open.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/03lookup.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/04branch.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/05wbr_policy.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06fhsm.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06mmap.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/06xattr.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/07export.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/08shwh.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/10dynop.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file Documentation/filesystems/aufs/design/99plan.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/kernel-parameters.txt
patching file Documentation/networking/scaling.txt
The next patch would create the file Documentation/scheduler/sched-BFS.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/scsi/link_power_management_policy.txt
patching file Documentation/sysctl/kernel.txt
The next patch would create the file Documentation/tp_smapi.txt,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file Documentation/virtual/kvm/devices/s390_flic.txt
patching file MAINTAINERS
patching file Makefile
patching file arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
patching file arch/arm/boot/dts/at91-sama5d3_xplained.dts
patching file arch/arm/boot/dts/dove.dtsi
patching file arch/arm/boot/dts/exynos5250-spring.dts
patching file arch/arm/boot/dts/imx23-olinuxino.dts
patching file arch/arm/boot/dts/imx25.dtsi
patching file arch/arm/boot/dts/imx28.dtsi
patching file arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
patching file arch/arm/boot/dts/omap3-n900.dts
patching file arch/arm/boot/dts/ste-dbx5x0.dtsi
patching file arch/arm/boot/dts/ste-href.dtsi
patching file arch/arm/boot/dts/ste-snowball.dts
patching file arch/arm/include/asm/elf.h
patching file arch/arm/include/uapi/asm/kvm.h
patching file arch/arm/kernel/Makefile
patching file arch/arm/kernel/hibernate.c
patching file arch/arm/kernel/process.c
The next patch would create the file arch/arm/kernel/psci-call.S,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file arch/arm/kernel/psci.c
The next patch would create the file arch/arm/kernel/reboot.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file arch/arm/kvm/arm.c
patching file arch/arm/mach-mvebu/pmsu.c
patching file arch/arm/mach-omap2/prm-regbits-34xx.h
patching file arch/arm/mach-omap2/prm-regbits-44xx.h
patching file arch/arm/mach-omap2/vc.c
patching file arch/arm/mach-omap2/vc.h
patching file arch/arm/mach-omap2/vc3xxx_data.c
patching file arch/arm/mach-omap2/vc44xx_data.c
patching file arch/arm/mach-s3c64xx/crag6410.h
patching file arch/arm/mach-s3c64xx/mach-crag6410.c
patching file arch/arm/net/bpf_jit_32.c
patching file arch/arm64/Kconfig
patching file arch/arm64/Makefile
patching file arch/arm64/include/asm/cpufeature.h
patching file arch/arm64/include/asm/smp_plat.h
patching file arch/arm64/include/uapi/asm/kvm.h
patching file arch/arm64/kernel/cpu_errata.c
patching file arch/arm64/kernel/entry.S
patching file arch/arm64/kernel/head.S
patching file arch/arm64/kernel/setup.c
patching file arch/arm64/kernel/smp.c
patching file arch/arm64/mm/dma-mapping.c
patching file arch/c6x/kernel/time.c
patching file arch/mips/Kconfig
patching file arch/mips/Makefile
patching file arch/mips/bcm47xx/board.c
patching file arch/mips/bcm63xx/prom.c
patching file arch/mips/bcm63xx/setup.c
patching file arch/mips/cavium-octeon/dma-octeon.c
patching file arch/mips/cavium-octeon/setup.c
patching file arch/mips/include/asm/asm-eva.h
patching file arch/mips/include/asm/cacheflush.h
patching file arch/mips/include/asm/cpu-features.h
patching file arch/mips/include/asm/elf.h
patching file arch/mips/include/asm/fpu.h
patching file arch/mips/include/asm/kvm_host.h
patching file arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
patching file arch/mips/include/asm/octeon/cvmx.h
patching file arch/mips/include/asm/octeon/pci-octeon.h
patching file arch/mips/include/asm/pgtable.h
patching file arch/mips/include/asm/r4kcache.h
patching file arch/mips/include/asm/spinlock.h
patching file arch/mips/kernel/entry.S
patching file arch/mips/kernel/smp-cps.c
patching file arch/mips/kernel/unaligned.c
patching file arch/mips/kvm/emulate.c
patching file arch/mips/kvm/mips.c
patching file arch/mips/kvm/trap_emul.c
patching file arch/mips/loongson/loongson-3/irq.c
patching file arch/mips/mm/cache.c
patching file arch/mips/mm/tlbex.c
patching file arch/mips/mti-malta/malta-memory.c
patching file arch/mips/netlogic/xlp/ahci-init-xlp2.c
patching file arch/mips/pci/Makefile
patching file arch/mips/pci/pci-octeon.c
patching file arch/mips/pci/pcie-octeon.c
patching file arch/mips/power/hibernate.S
patching file arch/mips/ralink/Kconfig
patching file arch/powerpc/kernel/cacheinfo.c
patching file arch/powerpc/mm/hugetlbpage.c
patching file arch/powerpc/perf/callchain.c
patching file arch/powerpc/platforms/cell/interrupt.c
patching file arch/powerpc/platforms/cell/iommu.c
patching file arch/powerpc/platforms/cell/spufs/sched.c
patching file arch/powerpc/platforms/powernv/pci-ioda.c
patching file arch/s390/kernel/suspend.c
patching file arch/s390/kvm/interrupt.c
patching file arch/s390/kvm/kvm-s390.h
patching file arch/s390/kvm/priv.c
patching file arch/x86/Kconfig
patching file arch/x86/Kconfig.cpu
patching file arch/x86/Makefile_32.cpu
patching file arch/x86/include/asm/insn.h
patching file arch/x86/include/asm/mwait.h
patching file arch/x86/include/asm/pvclock.h
patching file arch/x86/include/asm/spinlock.h
patching file arch/x86/kernel/acpi/boot.c
patching file arch/x86/kernel/apic/io_apic.c
patching file arch/x86/kernel/cpu/intel.c
patching file arch/x86/kernel/cpu/perf_event_intel_ds.c
patching file arch/x86/kernel/early_printk.c
patching file arch/x86/kernel/ioport.c
patching file arch/x86/kernel/process.c
patching file arch/x86/kernel/pvclock.c
patching file arch/x86/kvm/vmx.c
patching file arch/x86/kvm/x86.c
patching file arch/x86/lib/insn.c
patching file arch/x86/lib/usercopy_64.c
patching file arch/x86/pci/acpi.c
patching file arch/x86/platform/efi/early_printk.c
patching file arch/x86/tools/test_get_len
patching file arch/x86/vdso/vclock_gettime.c
patching file arch/xtensa/Kconfig
patching file arch/xtensa/include/uapi/asm/unistd.h
patching file arch/xtensa/platforms/iss/network.c
patching file arch/xtensa/platforms/xtfpga/Makefile
patching file arch/xtensa/platforms/xtfpga/include/platform/hardware.h
patching file arch/xtensa/platforms/xtfpga/include/platform/lcd.h
patching file arch/xtensa/platforms/xtfpga/lcd.c
patching file block/Kconfig.iosched
patching file block/Makefile
The next patch would create the file block/bfq-cgroup.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-ioc.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-iosched.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq-sched.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file block/bfq.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file block/blk-core.c
patching file block/blk-mq.c
patching file block/blk-sysfs.c
patching file drivers/accessibility/braille/braille_console.c
patching file drivers/acpi/acpi_pnp.c
patching file drivers/acpi/acpica/acmacros.h
patching file drivers/acpi/acpica/dsopcode.c
patching file drivers/acpi/acpica/evgpe.c
patching file drivers/acpi/acpica/evregion.c
patching file drivers/acpi/acpica/exdump.c
patching file drivers/acpi/acpica/exfldio.c
patching file drivers/acpi/acpica/exregion.c
patching file drivers/acpi/acpica/hwgpe.c
patching file drivers/acpi/acpica/hwvalid.c
patching file drivers/acpi/acpica/nsdump.c
patching file drivers/acpi/acpica/tbdata.c
patching file drivers/acpi/acpica/tbinstal.c
patching file drivers/acpi/acpica/tbprint.c
patching file drivers/acpi/acpica/tbxfroot.c
patching file drivers/acpi/acpica/utaddress.c
patching file drivers/acpi/blacklist.c
patching file drivers/acpi/resource.c
patching file drivers/acpi/sbs.c
patching file drivers/acpi/sbshc.c
patching file drivers/acpi/scan.c
patching file drivers/ata/acard-ahci.c
patching file drivers/ata/ahci.c
patching file drivers/ata/ahci.h
patching file drivers/ata/libahci.c
patching file drivers/ata/libahci_platform.c
patching file drivers/ata/libata-core.c
patching file drivers/ata/libata-eh.c
patching file drivers/ata/libata-pmp.c
patching file drivers/ata/libata-scsi.c
patching file drivers/ata/libata.h
patching file drivers/ata/sata_highbank.c
patching file drivers/base/bus.c
patching file drivers/base/cacheinfo.c
patching file drivers/base/platform.c
patching file drivers/block/loop.c
patching file drivers/block/rbd.c
patching file drivers/bluetooth/ath3k.c
patching file drivers/bluetooth/btusb.c
patching file drivers/char/tpm/tpm-chip.c
patching file drivers/clk/at91/clk-usb.c
patching file drivers/clk/qcom/clk-rcg.c
patching file drivers/clk/qcom/clk-rcg.h
patching file drivers/clk/qcom/clk-rcg2.c
patching file drivers/clk/qcom/gcc-ipq806x.c
patching file drivers/clk/qcom/lcc-ipq806x.c
patching file drivers/clk/samsung/clk-exynos4.c
patching file drivers/clk/tegra/clk-tegra124.c
patching file drivers/clk/tegra/clk.c
patching file drivers/cpufreq/cpufreq.c
patching file drivers/cpufreq/cpufreq_conservative.c
patching file drivers/cpufreq/cpufreq_ondemand.c
patching file drivers/cpufreq/intel_pstate.c
patching file drivers/crypto/omap-aes.c
patching file drivers/gpio/gpio-mvebu.c
patching file drivers/gpio/gpiolib-sysfs.c
patching file drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
patching file drivers/gpu/drm/drm_irq.c
patching file drivers/gpu/drm/exynos/exynos_dp_core.c
patching file drivers/gpu/drm/exynos/exynos_drm_fimd.c
The next patch would create the file drivers/gpu/drm/exynos/exynos_drm_fimd.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/gpu/drm/i2c/adv7511.c
patching file drivers/gpu/drm/i915/i915_drv.c
patching file drivers/gpu/drm/i915/i915_irq.c
patching file drivers/gpu/drm/i915/i915_reg.h
patching file drivers/gpu/drm/i915/intel_display.c
patching file drivers/gpu/drm/i915/intel_dp.c
patching file drivers/gpu/drm/i915/intel_i2c.c
patching file drivers/gpu/drm/i915/intel_lvds.c
patching file drivers/gpu/drm/radeon/atombios_crtc.c
patching file drivers/gpu/drm/radeon/atombios_encoders.c
patching file drivers/gpu/drm/radeon/dce6_afmt.c
patching file drivers/gpu/drm/radeon/evergreen_hdmi.c
patching file drivers/gpu/drm/radeon/r600_hdmi.c
patching file drivers/gpu/drm/radeon/radeon_asic.c
patching file drivers/gpu/drm/radeon/radeon_asic.h
patching file drivers/gpu/drm/radeon/radeon_audio.c
patching file drivers/gpu/drm/radeon/radeon_connectors.c
patching file drivers/gpu/drm/radeon/radeon_cs.c
patching file drivers/gpu/drm/radeon/radeon_ttm.c
patching file drivers/gpu/drm/radeon/radeon_uvd.c
patching file drivers/gpu/drm/radeon/radeon_vce.c
patching file drivers/gpu/drm/radeon/radeon_vm.c
patching file drivers/gpu/drm/radeon/rv770d.h
patching file drivers/gpu/drm/radeon/si_dpm.c
patching file drivers/gpu/drm/radeon/uvd_v1_0.c
patching file drivers/gpu/drm/radeon/uvd_v2_2.c
patching file drivers/hid/Kconfig
patching file drivers/hid/Makefile
patching file drivers/hid/hid-ids.h
patching file drivers/hid/hid-multitouch.c
The next patch would create the file drivers/hid/huiontablet.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/hid/usbhid/hid-quirks.c
patching file drivers/hv/channel.c
patching file drivers/hv/channel_mgmt.c
patching file drivers/i2c/busses/i2c-rk3x.c
patching file drivers/i2c/i2c-core.c
patching file drivers/i2c/i2c-mux.c
patching file drivers/idle/intel_idle.c
patching file drivers/infiniband/core/cma.c
patching file drivers/infiniband/core/umem.c
patching file drivers/infiniband/hw/mlx4/qp.c
patching file drivers/infiniband/ulp/iser/iser_initiator.c
patching file drivers/infiniband/ulp/isert/ib_isert.c
patching file drivers/input/input-mt.c
patching file drivers/input/joydev.c
patching file drivers/input/mouse/alps.c
patching file drivers/input/mouse/elantech.c
patching file drivers/input/mouse/elantech.h
patching file drivers/input/mouse/synaptics.c
patching file drivers/input/mouse/synaptics.h
patching file drivers/macintosh/Kconfig
patching file drivers/macintosh/adbhid.c
patching file drivers/md/md.c
patching file drivers/md/raid0.c
patching file drivers/media/platform/marvell-ccic/mcam-core.c
patching file drivers/media/platform/marvell-ccic/mcam-core.h
patching file drivers/media/rc/img-ir/img-ir-core.c
patching file drivers/media/usb/stk1160/stk1160-v4l.c
patching file drivers/memstick/core/mspro_block.c
patching file drivers/mfd/mfd-core.c
patching file drivers/mmc/card/block.c
patching file drivers/mmc/card/queue.c
patching file drivers/mmc/card/queue.h
patching file drivers/mmc/core/core.c
patching file drivers/mmc/host/sh_mmcif.c
patching file drivers/mmc/host/sunxi-mmc.c
patching file drivers/mmc/host/tmio_mmc_pio.c
patching file drivers/mtd/ubi/attach.c
patching file drivers/mtd/ubi/cdev.c
patching file drivers/mtd/ubi/eba.c
patching file drivers/mtd/ubi/wl.c
patching file drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
patching file drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
patching file drivers/net/ethernet/cadence/macb.c
patching file drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
patching file drivers/net/ethernet/intel/e1000/e1000_main.c
patching file drivers/net/ethernet/marvell/pxa168_eth.c
patching file drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
patching file drivers/net/ethernet/mellanox/mlx4/en_netdev.c
patching file drivers/net/ethernet/mellanox/mlx4/en_rx.c
patching file drivers/net/ethernet/mellanox/mlx4/en_tx.c
patching file drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
patching file drivers/net/netconsole.c
patching file drivers/net/ppp/ppp_generic.c
patching file drivers/net/vxlan.c
patching file drivers/net/wireless/hostap/hostap.h
patching file drivers/net/wireless/hostap/hostap_ap.c
patching file drivers/net/wireless/hostap/hostap_config.h
patching file drivers/net/wireless/hostap/hostap_hw.c
patching file drivers/net/wireless/hostap/hostap_info.c
patching file drivers/net/wireless/hostap/hostap_ioctl.c
patching file drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
patching file drivers/net/wireless/ti/wl18xx/debugfs.c
patching file drivers/net/wireless/ti/wlcore/debugfs.h
patching file drivers/nfc/st21nfcb/i2c.c
patching file drivers/pinctrl/core.c
patching file drivers/pinctrl/core.h
patching file drivers/pinctrl/devicetree.c
patching file drivers/platform/x86/Kconfig
patching file drivers/platform/x86/Makefile
patching file drivers/platform/x86/compal-laptop.c
patching file drivers/platform/x86/hdaps.c
The next patch would create the file drivers/platform/x86/thinkpad_ec.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/platform/x86/tp_smapi.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/power/ipaq_micro_battery.c
patching file drivers/power/lp8788-charger.c
patching file drivers/power/twl4030_madc_battery.c
patching file drivers/rtc/rtc-armada38x.c
patching file drivers/scsi/3w-9xxx.c
patching file drivers/scsi/3w-9xxx.h
patching file drivers/scsi/3w-sas.c
patching file drivers/scsi/3w-sas.h
patching file drivers/scsi/3w-xxxx.c
patching file drivers/scsi/3w-xxxx.h
patching file drivers/scsi/megaraid/megaraid_sas_fusion.c
patching file drivers/scsi/mvsas/mv_sas.c
patching file drivers/scsi/scsi_devinfo.c
patching file drivers/scsi/scsi_scan.c
patching file drivers/scsi/sd.c
patching file drivers/scsi/sd_dif.c
patching file drivers/scsi/storvsc_drv.c
patching file drivers/spi/spi-imx.c
patching file drivers/spi/spidev.c
patching file drivers/ssb/Kconfig
patching file drivers/staging/Kconfig
patching file drivers/staging/Makefile
patching file drivers/staging/android/sync.c
patching file drivers/staging/panel/panel.c
The next patch would create the file drivers/staging/vhba/Kconfig,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/staging/vhba/Makefile,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/staging/vhba/vhba.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/staging/vt6655/rxtx.c
patching file drivers/target/iscsi/iscsi_target.c
patching file drivers/target/iscsi/iscsi_target_erl0.c
patching file drivers/target/iscsi/iscsi_target_login.c
patching file drivers/target/target_core_file.c
patching file drivers/target/target_core_sbc.c
patching file drivers/target/target_core_transport.c
patching file drivers/tty/Kconfig
patching file drivers/tty/hvc/hvc_xen.c
patching file drivers/tty/serial/8250/8250_core.c
patching file drivers/tty/serial/8250/8250_dw.c
patching file drivers/tty/serial/8250/8250_early.c
patching file drivers/tty/serial/atmel_serial.c
patching file drivers/tty/serial/imx.c
patching file drivers/tty/serial/of_serial.c
patching file drivers/tty/serial/uartlite.c
patching file drivers/tty/serial/xilinx_uartps.c
patching file drivers/tty/vt/vt.c
patching file drivers/usb/chipidea/otg_fsm.c
patching file drivers/usb/class/cdc-acm.c
patching file drivers/usb/class/cdc-wdm.c
patching file drivers/usb/core/hub.c
patching file drivers/usb/dwc2/hcd.c
patching file drivers/usb/gadget/legacy/printer.c
patching file drivers/usb/host/ehci-hcd.c
patching file drivers/usb/host/ehci-hub.c
patching file drivers/usb/host/fotg210-hcd.c
patching file drivers/usb/host/fusbh200-hcd.c
patching file drivers/usb/host/isp116x-hcd.c
patching file drivers/usb/host/oxu210hp-hcd.c
patching file drivers/usb/host/r8a66597-hcd.c
patching file drivers/usb/host/sl811-hcd.c
patching file drivers/usb/host/uhci-hub.c
patching file drivers/usb/host/xhci-ring.c
patching file drivers/usb/isp1760/isp1760-hcd.c
patching file drivers/usb/musb/musb_core.c
patching file drivers/usb/musb/musb_virthub.c
patching file drivers/usb/phy/phy.c
patching file drivers/usb/storage/uas-detect.h
patching file drivers/usb/storage/uas.c
patching file drivers/usb/storage/usb.c
patching file drivers/vfio/vfio.c
patching file drivers/video/logo/Kconfig
patching file drivers/video/logo/Makefile
patching file drivers/video/logo/logo.c
The next patch would create the file drivers/video/logo/logo_arch_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_bsd_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_debian_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_exherbo_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fbsd_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fedoraglossy_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_fedorasimple_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_gentoo_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_oldzen_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_slackware_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_tits_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file drivers/video/logo/logo_zen_clut224.ppm,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file drivers/xen/events/events_2l.c
patching file drivers/xen/events/events_base.c
patching file drivers/xen/xen-pciback/conf_space.c
patching file drivers/xen/xen-pciback/conf_space.h
patching file drivers/xen/xen-pciback/conf_space_header.c
patching file drivers/xen/xenbus/xenbus_probe.c
patching file fs/Kconfig
patching file fs/Makefile
The next patch would create the file fs/aufs/Kconfig,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/Makefile,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/aufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/branch.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/branch.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/cpup.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/cpup.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dbgaufs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dbgaufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dcsub.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dcsub.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/debug.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/debug.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dentry.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dentry.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dir.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dir.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dynop.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/dynop.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/export.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/f_op.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/fhsm.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/file.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/file.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/finfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/fstype.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hfsnotify.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hfsplus.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/hnotify.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_add.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_del.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/i_op_ren.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/iinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/inode.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/inode.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/ioctl.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/loop.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/loop.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/magic.mk,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/module.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/module.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/mvdown.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/opts.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/opts.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/plink.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/poll.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/posix_acl.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/procfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/rdu.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/rwsem.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sbinfo.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/spl.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/super.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/super.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysaufs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysaufs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/sysrq.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vdir.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vfsub.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/vfsub.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wbr_policy.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/whout.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/whout.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wkq.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/wkq.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/xattr.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file fs/aufs/xino.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file fs/binfmt_elf.c
patching file fs/btrfs/extent-tree.c
patching file fs/btrfs/ioctl.c
patching file fs/btrfs/send.c
patching file fs/btrfs/xattr.c
patching file fs/buffer.c
patching file fs/coredump.c
patching file fs/dcache.c
patching file fs/exec.c
patching file fs/ext4/extents.c
patching file fs/ext4/extents_status.c
patching file fs/ext4/inode.c
patching file fs/ext4/namei.c
patching file fs/file_table.c
patching file fs/hfsplus/xattr.c
patching file fs/inode.c
patching file fs/lockd/svcsubs.c
patching file fs/namei.c
patching file fs/namespace.c
patching file fs/nfs/callback.c
patching file fs/nfs/direct.c
patching file fs/nfs/nfs4xdr.c
patching file fs/nfs/read.c
patching file fs/nfs/write.c
patching file fs/nfsd/nfs4proc.c
patching file fs/nfsd/nfs4state.c
patching file fs/nfsd/nfs4xdr.c
patching file fs/nfsd/nfsctl.c
patching file fs/nfsd/nfsd.h
patching file fs/nilfs2/btree.c
patching file fs/notify/group.c
patching file fs/notify/mark.c
patching file fs/ocfs2/dlm/dlmmaster.c
patching file fs/open.c
patching file fs/pnode.c
patching file fs/pnode.h
patching file fs/proc/base.c
patching file fs/proc/nommu.c
patching file fs/proc/task_mmu.c
patching file fs/proc/task_nommu.c
patching file fs/splice.c
patching file fs/xattr.c
patching file include/acpi/acconfig.h
patching file include/acpi/acpixf.h
patching file include/acpi/actypes.h
patching file include/acpi/platform/acenv.h
patching file include/dt-bindings/clock/tegra124-car-common.h
patching file include/linux/bpf.h
patching file include/linux/cgroup_subsys.h
patching file include/linux/console.h
patching file include/linux/file.h
patching file include/linux/init_task.h
patching file include/linux/ioprio.h
patching file include/linux/jiffies.h
patching file include/linux/libata.h
patching file include/linux/linux_logo.h
patching file include/linux/mm.h
patching file include/linux/mm_types.h
patching file include/linux/mount.h
patching file include/linux/nilfs2_fs.h
patching file include/linux/sched.h
patching file include/linux/sched/prio.h
patching file include/linux/skbuff.h
patching file include/linux/splice.h
The next patch would create the file include/linux/thinkpad_ec.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/linux/usb.h
patching file include/linux/usb_usual.h
patching file include/scsi/scsi_devinfo.h
patching file include/sound/emu10k1.h
patching file include/sound/soc-dapm.h
patching file include/target/iscsi/iscsi_target_core.h
patching file include/target/target_core_base.h
The next patch would create the file include/trace/events/fs.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/uapi/linux/Kbuild
The next patch would create the file include/uapi/linux/aufs_type.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file include/uapi/linux/nfsd/debug.h
patching file include/uapi/linux/sched.h
patching file include/uapi/linux/vt.h
patching file include/video/samsung_fimd.h
patching file init/Kconfig
patching file init/main.c
patching file kernel/bpf/core.c
patching file kernel/bpf/verifier.c
patching file kernel/debug/kdb/kdb_io.c
patching file kernel/delayacct.c
patching file kernel/exit.c
patching file kernel/fork.c
patching file kernel/printk/printk.c
patching file kernel/ptrace.c
patching file kernel/sched/Makefile
The next patch would create the file kernel/sched/bfs.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
The next patch would create the file kernel/sched/bfs_sched.h,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file kernel/sched/core.c
patching file kernel/sched/deadline.c
patching file kernel/sched/fair.c
patching file kernel/sched/idle.c
patching file kernel/sched/stats.c
patching file kernel/stop_machine.c
patching file kernel/sysctl.c
patching file kernel/time/Kconfig
patching file kernel/time/posix-cpu-timers.c
patching file kernel/trace/ring_buffer.c
patching file kernel/trace/trace_events.c
patching file kernel/trace/trace_functions_graph.c
patching file kernel/trace/trace_selftest.c
patching file lib/Kconfig.debug
patching file lib/string.c
patching file mm/Makefile
patching file mm/filemap.c
patching file mm/huge_memory.c
patching file mm/hugetlb.c
patching file mm/madvise.c
patching file mm/memory-failure.c
patching file mm/memory.c
patching file mm/mempolicy.c
patching file mm/mmap.c
patching file mm/msync.c
patching file mm/nommu.c
patching file mm/page-writeback.c
The next patch would create the file mm/prfile.c,
which already exists! Skipping patch.
1 out of 1 hunk ignored
patching file net/bridge/br_netfilter.c
patching file net/core/dev.c
patching file net/core/skbuff.c
patching file net/ethernet/eth.c
patching file net/ipv4/Kconfig
patching file net/ipv4/geneve.c
patching file net/ipv4/ip_forward.c
patching file net/ipv4/ping.c
patching file net/ipv4/route.c
patching file net/ipv4/tcp_output.c
patching file net/mac80211/mlme.c
patching file net/netlink/af_netlink.c
patching file scripts/mkcompile_h
patching file security/commoncap.c
patching file security/device_cgroup.c
patching file security/security.c
patching file sound/oss/sequencer.c
patching file sound/pci/emu10k1/emu10k1.c
patching file sound/pci/emu10k1/emu10k1_callback.c
patching file sound/pci/emu10k1/emu10k1_main.c
patching file sound/pci/emu10k1/emupcm.c
patching file sound/pci/emu10k1/emuproc.c
patching file sound/pci/emu10k1/memory.c
patching file sound/pci/hda/hda_codec.c
patching file sound/pci/hda/patch_realtek.c
patching file sound/pci/hda/thinkpad_helper.c
patching file sound/soc/codecs/cs4271.c
patching file sound/soc/codecs/pcm512x.c
patching file sound/soc/codecs/rt5677.c
patching file sound/soc/codecs/tfa9879.c
patching file sound/soc/codecs/wm8741.c
patching file sound/soc/davinci/davinci-evm.c
patching file sound/soc/samsung/s3c24xx-i2s.c
patching file sound/synth/emux/emux_oss.c
patching file sound/synth/emux/emux_seq.c
patching file sound/usb/quirks.c
patching file tools/lib/traceevent/kbuffer-parse.c
patching file tools/perf/config/Makefile
patching file tools/perf/tests/make
patching file tools/perf/util/cloexec.c
patching file tools/perf/util/cloexec.h
patching file tools/perf/util/symbol-elf.c
patching file tools/power/x86/turbostat/Makefile
patching file virt/kvm/arm/vgic.c
patching file virt/kvm/kvm_main.c
==> ERROR: A failure occurred in prepare().
Aborting...
Last edited by MrEvilBreakfast (2015-05-24 17:08:08)

Installing grsecurity patched kernel from AUR

Similar Messages

Maybe you are looking for