Installing iPhone driver

I was trying to transfer some songs to my iphone today when i connected it it didnt make the sound it makes and it wasent detected by the computer and it isn't even charging I have tried doing everything but no luck I have a Windows 8 64bit with the latest edition of itunes and an iphone 3gs with software 6.1.3. furthermore it is detected in the device manager but it has an exclamation mark next to it and it wouldn't update What do I do ???

Hello omarashraf97,
You may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
There is a section titled "Verify that the Apple Mobile Device USB Driver is installed" that should help resolve this issue.
Best regards,
Allen

Similar Messages

Computer unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

My computer is unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

It's included in the iTunes installation bundle. Re-download and re-install iTunes on your PC.

Iphone driver will not install

i have just bought an iphone 3GS on ebay.plugged it in to itunes to restore it. the data was wipped and i got a message saying driver not installed. iphone is now not recognised in itunes or my computer and says in recovery mode in device manager. phone now does not work. help

Hopefully you didn't buy a jailbroken iPhone or you may never get it working (a reason to avoid buying on on ebay). If Windows does not recognize the phone (it isn't shown in device manager), check item number 4 at the bottom of this guide (Apple Mobile Device USB Driver): http://support.apple.com/kb/TS1538. If Windows does recognize it but iTunes doesn't, then work through the other troubleshooting steps in this guide, particularly items 2& 3 at the bottom (Apple Mobile Device Service).

HT201401 keeps trying to install device driver each time i plug in the iphone

keeps trying to install device driver each time i plug in the iphone

I guess there's a missing device driver in your OS.

Apple iPhone Driver Windows 7

There's lots on the forum about iPhone driver problems with Windows 7, but I've been unable to resolve my problem and would appreciate clarification...
There are two devices that show up when I plug in my iPhone 4S. One is the Apple Mobile Device USB Driver. This device is never a problem on my machine, and based on what does and doesn't work, is what provides access via iTunes. The second, the Apple iPhone, makes the camera roll visible in Windows Explorer. This one is always a problem on my machine, requiring that I use the troubleshooter to reload the drivers. The troubleshooter is always successful in loading drivers, and always loads the same drivers (WpdMtpDr.dll, winusb.sys, WUDFRd.sys, WpdMtp.dll and WpdMtpUS.dll).
What I've ruled out:
1. The cable works fine on my laptop (running the same version of Windows).
2. The Apple Mobile Device USB Driver is never a problem in Device Manager and shows the correct Apple drivers (dated 12/13/2012).
3. I've uninstalled and reinstalled iTunes several times (too many).
4. Clean USB environment. No defunct devices, no other problem devices. No other smartphones.
What I haven't ruled out:
1. Canon Powershot A650 driver could be a conflict. However, I don't connect the camera nearly as often, and the Apple iPhone driver fails whether or not I've connected the camera in the interim. I've also had both connected at the same time without experiencing software issues. Is there an empirical way other than trial-and-error to identify software conflicts?
2. Photos from other devices. Is this just on the camera roll? If so, I can rule it out. If not, it's sort of unbelievable.
What I don't understand:
1. How does the passcode enter into loading drivers? I understand not being able to access certain things, but not failing to load a driver.
Thanks in advance for your suggestions. No fear of editing the registry or manipulating system files. Apologies if this should be posted in a different forum.

I had similar problems and found a useful site. My iPhone 4s and iPad weren't found by iTunes. Tried the suggestions below and my problem was fixed.
http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/
Hope this helps!

After updating my ipod touch my computer does not detect my ipod in devices on itunes. It says I need to install a driver software for my mobile device. Help.

After updating my ipod touch, my computer did not detect my ipod in devices on itunes. It says I need to install a driver software for my mobile device. Help pls?

Maybe this will resolve your problem:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Or you may have to look at the river/server topicsof the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Since you were unclear at to the error message.

Installing device driver every time I turn on the computer

Every time I turn on my computer or plug in my iPhone 3G, I get the little icon and popup for "Installing Device Driver" and after a couple of minutes it says it installed successfully and then starts installing itself all over again. It's irritating as heck. I'm on Windows Vista and iTunes version 9.1.1.12. I updated Windows and updated iTunes and neither helped. This just started happening within the last week. My computer only has one USB drive and it's the one I've always used. Please help!

It sounds as if you have more than one thing going on here. You say that when you turn on your computer you are getting an icon about installing device driver. Then you say it happens "or plug in my iPhone 3G". These should be two different issues.
Let's isolate the first one. When you turn the computer on, you are getting a device driver popup. This occurs every time you turn on the computer? Are you running it in an administrator mode? What kind of external devices do you have connected to the computer? What USB devices do you have connected, i.e. printer, external drives (not flash drives)?
After that, we can tackle the iPhone issue.

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

Did you talk to your carrier?

I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed"

iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be conﬁrmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah

How do I install ipad2 driver on my computer

How do I install ipad2 driver on my computer?

There is no driver to install. What you need to have on your computer to set up and maintain your iPad 2 is the most recent version of iTunes, which is a free download from Apple. From this site, click on iTunes and download it......

How do I install a driver on my macbook pro

How do I install a driver on my macbook pro

ECastrillo,
it depends upon the driver. Which driver are you trying to install?

How can I install a driver for HP Laserjet P3005. My mac won't allow installation?

My macbook won't allow em to install the driver for HP Laserjetp3005. Any ideas?

Apple suppies all the drivers for all the printers that work with any specific os x version. Just go to the Print & scan section of system preferences and Add Printer (Plus ( + ) Sign) and if it is supported the driver will be there.

How can i install jdbc driver

Hi
i install websphere 5 and try to connect to my sql server but cannot find jdbc driver class path and can not find any jdbc driver
pls tell me how can i install jdbc driver in my websphere
with regards

You may get a better response posting this question in a WebSphere specific forum. Maybe this will help, the following link shows the command you need to execute to install a JDBC driver in websphere 5.0.
http://publib.boulder.ibm.com/infocenter/wasinfo/index.jsp?tab=search&searchWord=mysql+driver&maxHits=50

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

The wacom site will have the drivers for you.
http://us.wacom.com/en/support/drivers

Agere Ethernet Controller (ET-131x) - unable to install the driver

I need to install the following wired NIC:
01:00.0 Ethernet controller: Agere Systems|ET-131x PCI-E Ethernet Controller (unknown)
It seems that the "et131x" kernel module is necessary.
The web site bellow gives instructions on how to install the driver from sources:
http://dadams1969.googlepages.com/et131xkernelmodule
Unfortunatly I am unable to do it.
I have also tried to install the module compiled by a member at the following address:
http://www.archlinux.org/~tom/packages/
The module seems to be installed properly. A new folder is created in /lib/modules/
However, I am unable to load it.
# modprobe et131x.ko
FATAL: Module et131x.ko not found
#insmod et131x.ko
insmod: error inserting 'et131x.ko': -1 Invalid module format
Am I doing something wrong?
NB:
The module has been compiled for the 2.6.20 kernel and I am using 2.6.22 (i686)...
Last edited by sylvain77 (2007-09-26 08:23:48)

Heh... I had competely forgotten that I had done that, so now I feel morally obliged to help you.
I just tried a rebuild against 2.6.22 and it failed, but after a little digging around, I found a patch, and now it builds. I can't tell you if it works or not, as I don't have the hardware.
Get the new package in the same place as before, and let me know how it goes.
It's worth noting that this code is 6 months old at this stage, and the project doesn't seem to be very active. There's one 4-mail thread about it on lkml.org, with no indication that this will ever be merged to mainline.

Installing iPhone driver

Similar Messages

Maybe you are looking for