Installing JS App Server 8.2 platform on Sol10: Warning on java2 SDK

I am running Solaris 10 (03/05) on a sparc Ultra10 workstation.
Downloaded and installed Sun Java System Application Server 8.2 platform edition yesterday, using the installation wizard from a .bin file (nicer than pkgadd!).
It installed successfully, and I was able to run the sample "what's your name?" app provided in domain1. However two odd things during installation:
(1) It assigned HTTP port 33107 instead of 8080 as is assumed in the documentation. Would that be because I already had Apache Tomcat web server up and running, which uses 8080?
(2) Got a warning during installation: "The java2 SDK at /usr/j2se is lower than the recommended 1.4.2 version. Specify another or continue?" (that's not quite verbatim.)
But in /usr/j2se I seem to have a complete java2 SDK. The README there says it's 1.4.2, and all the directories/files seem to be there. Why would the installer complain?
Question (2) is important because I had subsequent trouble running a JSP web app built by a colleague, and an imcomplete java2 may be the cause.
Thanks.

On your first question:
AppServer installer uses default port (8080) only when it is available. If not it searches for available ports within specific range.
Concerning the java version - try to get exact version of jdk installed in /usr/j2se using java -version command and compare it with version of jdk mentioned in AS8.2 release notes. Alternatively you can install version of jdk shipped with appserver to make sure you are running AppServer with supported jdk.

Similar Messages

  • Installing Oracle App Server on Linux

    Hi,
    Has anyone installed the App Server on Linux? Can they tell me if it was difficult, complicated, etc. bearing in mind that I am not a DBA, and have basically no experiance with this sort of stuff at all. So basically what I am asking is can you stick in the CDs and follow the install guide and get it done in half a day or less.
    Cheers.

    I would say that a half a day is grossly underestimating it, by my experience and what you indicate your level of expertise is. I ended up installing, getting to a fail point, uninstalling and re-doing. Some errors are "recoverable", but some do not seem to be (from my experience). I'd make a few recommendations. I have it installed on Mandrake 8.x (latest release, I think), which seems to be "doable" but I'd recommend going with a certified platform if you don't know what you are doing. Also, Mandrake had some quirks like their security management software which resets file permissions "behind the scenes". This was my first experience with Mandrake so it took me a while to figure out which files to edit/fix so that Enterprise manager would get the right data.
    Read the readme!
    Read the installation docs all the way through!
    Read the release notes all the way through!
    I had a NUMBER of problems, some specific to my platform (which is not certified by Oracle, so it's not their fault) and some which were covered in the readme. It took me a while to get everything right and I ended up struggling most with the Infrastructure install. Most likely that was due to my hardware & OS (Mandrake), but there are some issues in the release notes that are important. The reason I would restart many times is that I wanted the installation to go smoothly from start to finish so that I could better understand the requirements, etc. Examples of issues (which includes things from the readme/release notes and otn):
    - either install PDKSH or link /bin/bash to /bin/ksh. /bin/ksh is listed in one of the scripts as the shell during installation configuration. This should be in the installation guide as a pre-requisite.
    - install the sysstat package so the enterprise manager will show graphs, etc. This should be in the installation guide as a pre-requisite.
    - link (symbolic) your perl binary to /usr/local/bin/perl
    - I received numerous link errors due to two problems:
    - genclntsh didn't have a good link command for my platform. There seems to be two work-arounds posted around here, but I chose to add -lgcc and -L/path/to/gcclib on the ld line. E-mail me if you want more details ([email protected]). My path was something like: /usr/lib/gcc-lib/i586-mandrake-linux-gnu/2.96 where I found the libgcc.a
    - Reports server and Forms server failed because the link line was linking to libXm.2.1.so instead of libXm.2.0.1.so (or libXm.2.so, etc). The development team evidently used a later version of Motif than I had, so I fixed it in the forms and reports makefiles, respectively.
    I can't remember, offhand, what else I had to do, but this covers it. Obviously, a lot of this depends upon the type of install you choose. I wanted the reports server, which requires the infrastructure, etc.
    Good luck.
    Jeff

  • Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

    Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
    bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
    bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
    bash-3.00$ ./irca.sh
    Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
    (c) Copyright 2006 Oracle Corporation. All rights reserved.
    ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
    Please verify that the ORACLE_HOME is set correctly.
    bash-3.00$

    Hi Craig,
    Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
    So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
    Section :- Oracle Application Server 10g Release 3 (10.1.3)
    Regards,
    Praaksh.

  • Error installing the App Server 10.1.2.0.3 Metadata Repo Creation Asst

    Hi,
    I have upgraded the Database from 10.2.0.1 to 10.2.0.4,
    ORACLE_HOME=D:\oracle\product\10.2.0\db_1
    but while installing the App Server 10.1.2.0.3 Metadata Repo Creation Asst, im encountered with (in the OUI 'Destination' is Name:OracleAS1, Path:C:\OraHome_1)
    "There was error while loading the libaray:rgsQueries
    1. Stop Installation of all products
    2. Stop installation of this component only.
    Any help would be great.
    Regards,
    - Sri

    Anybody there to help me on this....
    Regards,
    - Sri

  • When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation. --- " cache File Read error"

    When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation.
    Also during installation screens an error window is displayed saying "cache File Read error -- Could not read ProductKey entry from the cache file "

    Hi,
    I also get the following message:
    "Could not read ProductKey entry from the cache file"
    I have no idea how to provide the installation software with the key. I also tried "keycheck.exe"
    Do you have a solution for this problem? Did you finish the installation?
    Christian

  • Problem while installing iPlanet App server 6.5

    when trying to install iplanet app server 6.5 on solaris 2.8, downloaded from the net, the installation hangs when displaying the progress bar. We have iplanet web server 6.0 sp2 installed in the machine. We also installed all the solaris patches it required. we tried 3,4 times,it is not giving any error message,just the installation screen hangs....
    Thanks in advance,
    [email protected]

    Hi,
    I haven't come across such an issue before but I would like to help. This could be probably because, the downloaded file may be corrupted due to come reasons. I would recomend you to give a try after downloading it once again. Please let me know your thoughts on the same.
    Regards
    Ganesh .R
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support

  • Installing sun apps server 7 on redhat 7.3

    Firstly I have redhat 9 so can I install the sunapps server 7 on redhat 9 ?
    secondly
    can I install sun apps server 7 on atleast redhat 7.3?
    the document with sun apps says that I can install sun apps server 7 on 7.2
    regards
    Mishra

    Hey Paul,
    I'm having problems just installing SUN ONE AS Standard Edition 7.0 on my Redhat 7.2 as ROOT. Did you not get any problems even starting it. It installed okay, but when I initially ran the script to start it (./asadmin start-appserv)... it kept crapping out. I did notice some JMS errors in the log, but I haven't come across any documentation on possible bugs. Thanks in advance,
    Tak.

  • Error occur when installing iPlanet App server 6.0 SP2

    Dear All,
    I have problems in installing the iPlanet App server 6.0 SP2 in Solaris.
    I choose typical installation and select default settings.
    - install iplanet server
    - typical install
    - install ALL components
    However, the following errors occur during the installation:
    sh: ./pre_nas_preinst: not found
    ERROR. Failure installing iPlanet Application Server Web Connector Component. Do you want to continue [n]?
    ERROR. Failure installing iPlanet Application Server Core Server Component. Do you want to continue [n]?
    ERROR. ...........
    What's the problem with it? Could anyone help....?
    Thank youin advance.
    Thx & Regards,
    Yvonne

    I would recommend to use the latest version of application server which is iAS6.5sp1MU2. Try this out and see if you run into any problems. Also please check the release notes available at docs.sun.com to check the compatibility.

  • Install Oracle app server

    Hi. how install Oracle application server on lixux x86 64?

    App server 10g installation document:
    http://download.oracle.com/docs/cd/B32110_01/install.1013/b32198/topo.htm#BABIAFAH

  • Error after Installing SOA App server

    Installed SOA-Oracle Application Server 10.1.3.3 as a noraml instance(admin instance is another node and it fine) and started the services and everything is running fine. but when i type the url in browser http://<ip>:7778/em i am getting The requested URL /em was not found on this server.
    I check the logs in Apache and found some error in log file there like
    "[Fri Mar 5 14:27:27 2010] [error] [client system ip] [ecid: 1267779447:<IP>:6836:0:2,0] File does not exist: /oracle-home/Apache/Apache/htdocs/em"
    OS version is Red Hat Enterprise Linux ES release 4 (Nahant Update 8)
    Kernel \r on an \m
    any idea how to troubleshoot?

    First check the port for the Enterprise Mgr. The default port for EM is provided at the end of the Oracle Application Server installation, as well as in the following text file in the install directory of the application server Oracle home:
    readme.txt
    Also see if the ASControl service is up and running for this respective instance.
    To start it using opmn, go to this ORACLE_HOME and do this:
    $ORACLE_HOME/bin/emctl.bat start iasconsole

  • How to install Oracle Apps Server (Discoverer 10g)

    Dear All,
    Can you tell me from where I can find the steps of installation and config or Oracle Application Server 10g (Discoverer 10g).
    Aqeel Nawaz

    Hi,
    Refer the below link:
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.htm
    http://www.oracle.com/technology/pub/articles/smiley-as10gr3-install.html
    Regards,
    Xaheer

  • How to install Oracle App Server 10g (10.1.3) on Windows 7 Machine

    Hi,
    I am unable to install Oracle 10g (10.1.3) on Windows 7 machine.
    The installer setup.exe check the OS version,before the installation and close the process.
    Please help me.
    Please send the complete steps to setup the oracle 10g release 10.1.3 for Windows 7

    Sorry ,
    Where I enable the check box verified by user & Where is this option.
    I run this setup using command prompt.

  • Problem installing lastest App Server on AIX

    I am installing on AIX 5.2, the maintenance level is 5.2.009, it passes all the preliminary steps including the amount of temp space, then it exits with an error that it cannot write to the /tmp/OraInstall... directory it had just created. There is plenty of space and the user i am installing as (oracle) can write to that directory.
    Any ideas?

    I am installing Oracle 10g AS 10.1.3 for AIX, should be the latest version. I haven't had a chance to select any particular type of install because the installer doesn't start up.
    The installer log entries:
    All installer requirements met.
    Checking operating system patches: IY76141:bos.mp:5.2.0.76,IY76141:bos.mp64:5.2.0.76,IY76141:bos.up:5.2.0.76 Passed
    Checking operating system packages: bos.adt.base,bos.adt.lib,bos.adt.libm,bos.perf.libperfstat,bos.perf.perfstat,bos.perf.proctools Passed
    Checking swap space: must be greater than 1536 MB. Actual 1664MB Passed
    Checking Temp space: must be greater than 1000 MB. Actual 1052 MB Passed
    $

  • Ifs Instalation (Database+app server same box)

    My environment:
    Windows Professional 2000
    Oracle Database 9.2.0.1 production
    Oracle9iAS Java Edition v9.0.3
    Oracle Internet File System Release 9.0.2 for windows
    I installed Oracle Ok.
    I installed Oracle9iAS Java Edition v9.0.3 in separate home Ok
    I installed Oracle Internet File System Release 9.0.2 for windows at the same 9ias Home Ok.
    Post installation Ok.
    %ORACLE_HOME%\9ifs\bin\ifsdeployear OK.
    When I launch the ifsmgr
    %ORACLE_HOME%\9ifs\bin\ifsmgr
    I could not logon with the default password
    System
    Mnager9ifs
    Am I missing any steps.
    Any assistance is greatly appreciated.
    Regards,
    Zakaria Ben-Salem

    IFS 9.0.2 is only certified against Oracle 9iAS 9.2.0.1.
    Hence it could be any number of things.
    I suggest posting a log detailing the error condition on the CM SDK / 9iFS forum. (Not this forum which is for Oracle Files).

  • Unable to install SJS App Server

    Please help - half way through installation I get the an error. THe log reads:
    INFO - Start Sun Java System Message Queue configuration
    INFO - End Sun Java System Message Queue configuration
    INFO - unpacked jar file: C:\Sun\AppServer\lib\admin-cli.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-admin.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-cmp.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-deployment-client.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-ext.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-jstl.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-tags.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\appserv-ws.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\commons-launcher.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\j2ee-svc.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\javaee.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\sun-appserv-ant.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\toplink-essentials.jar.pack.gz
    INFO - unpacked jar file: C:\Sun\AppServer\lib\deployment\sun-as-jsr88-dm.jar.pack.gz
    INFO - Start core server configuration.
    ERROR - default domain creation returned following exception: abnormal subprocess
    termination: Detailed Message:'��?' is not recognized as an internal or external command,
    operable program or batch file.
    '�??' is not recognized as an internal or external command,
    operable program or batch file.
    INFO - End core server configuration.
    INFO - Start samples configuration.
    INFO - End samples configuration.
    INFO - Start Derby Configuration.
    INFO - End Derby Configuration.

    Wierd characters from error message are probably coming from your PATH environment variable, so you'll need to clean it up as described in this thread:
    http://forum.java.sun.com/thread.jspa?forumID=136&threadID=561947

Maybe you are looking for

  • Question regarding WRT54G and XBOX LIVE

    I'm having trouble with XBOX live and when I called support they told me I had to change the ports on my Linksys from moderate to open...does anyone know how to do this?

  • Fix? Clicking on iTunes makes hidden application appear (usually Adobe Bridge)

    Here's what happens: iTunes is playing in the background while I'm working in some application... say, Photoshop.  To keep things tidied up, I have other open applications hidden.  But if I click on iTunes in the dock to give it focus, or click on th

  • Can you delete the last page of a document with a script?

    Hello, I have been building a script over the last week to help me remove formatting and reapply some of that formatting on a large number of files. I am still learning alot about how to build scripts and what the commmands are but I am almost doen w

  • Change indicator via trigger (Date/Timestamp)

    I have set up triggers on all my tables to update the 'TIME_STAMP' field whenever a change is made to the row. It works flawlessly in sql*plus as well as in TOAD. However,if I insert a record using a ADF client I can view the record and the trigger p

  • Start up freezes for about 30 seconds

    When I start the ipad, the lest-opened ap shows on the screen. The ipad is unresponsive for about 30 seconds before it can be used. Why? Can this be corrected?