Installing Oracle 9.0.x JDBC adapter in XI 3.0

Has anybody installed this one before? I have the general procedure on how to install JDBC drivers, but would like to know exactly which files need to be installed where.

Similar Messages

Updateing oracle table Emp usering JDBC Adapter

Hi,
IS any one can help me what is the Format of JDBC Driver and Connection type.When we update a oracle table useing JDBC Adpater.
Thanks in advance
Regd's
Raj

Hi Raj,
To access any Database from XI, you will have to install the corresponding Driver on your XI server.
To install oracle driver, just check this link,
http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/index.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
The details that have to be entered while adapter configuration if you are using the OJDBC14.jar
The parameters should be mentioned as follows.
Connection : jdbc:oracle:thin:@<IP adress>:<listener port>:<instance name (database name)>
Driver : oracle.jdbc.driver.OracleDriver
Also go through these links for more information regarding the same:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/4f34c587f05048adee640f4c346417/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/frameset.htm
Regards,
Abhy

Oracle Function call from JDBC Adapter

Hi,
Is it possible to call Custom Oracle Function from JDBC Adapter?
I know we can call stored procedure but I need to call Oracle function. Please explain how?
Regards,
Shweta.

You'll need to provide a column alias for the function call:
select func(val) as alias from dual

Sending Idoc to oracle table Emp usering JDBC Adapter

Hi Guys,
Can you help me in these when we are pass a message through idoc to Oracle through jdbc adacpter reaciver
what sort of syntax Parameter need to write in
SQLSyntaxParameters Box in ID.
Regd's
Raj

Hi Raj,
You need to insert data from the IDoc to the Oracle Database. In this case the XML that is being sent to the Receiver JDBC Adapter should be correct.
The format for this can be obtained from the following link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Once this is correctly done nothing needs to be mentioned in the SQLSyntaxParameters Box in ID. U can leave the default values as it is.
Regards
Neetu

Oracle Function in JDBC Adapter

Dear All
Can we execute an oracle fucntion using receiver jdbc adapter? if yes then what should be the structure
I have gone through following links but the soluiotn is not clear
Using PI - Calling a Function in Oracle
Regards
Sourabh

I think two possible ways. You might want to write stored procedure and inside your stored procedure call oracle function. The second option is as below. In access tag write your query with standard functions. placeholder is to pass values for the variable.
<StatementName>
<anyName action=u201D SQL_QUERYu201D | u201CSQL_DMLu201D>
<access>SQL-String with optional placeholder(s)</access>
<key>
<placeholder1>value1</placeholder1>
<placeholder2>value2<placeholder2>
</key>
</anyName >
</StatementName>
Ex:
SELECT '03.12.2004:10:34:24' "Now",
 TO_CHAR(hiredate,'DD.MM.YYYY:HH24:MI:SS') "Hiredate",
 TO_DATE('03.12.2004:10:34:24','DD.MM.YYYY:HH24:MI:SS')
 - hiredate "Hired since [Days]"
FROM emp;
where to_char is the oracle function.

Writing Select statement for JDBC Adapter

Dear frndz,
Please guide me, i have to pick record form the Oracle D/B,
and this has to be updated in the Sap Table. For this scenario, tell me where i have to write the select statements to fetch the particular record.I was asked to use the jdbc adapter for this d/b link.
Thanks in advance
Karthikeyan

Hi karthikeyan,
You have to use a sender JDBC adapter.
Just follow the instructions in this link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Previously, you must install Oracle drivers so that JDBC works properly.
Regards,
Carlos

JDBC Adapter Error - SAPClassNotFoundException: oracle.jdbc.driver.OracleDr

Hi,
I am trying to implement JDBC to File scenario.
Trying to connect to Oracle Database. Oracle drivers are installed on XI server
JDBC Adapter parameters:
JDBC Driver - oracle.jdbc.driver.OracleDriver
Connection - jdbc:oracle:thin:@10.25.228.156:1521:databaseName=XE
Error which I can see in Communication Channel Monitoring is:
Error during database connection to the database URL 'jdbc:oracle:thin:@w4inpusyga6:1521:XE' using the JDBC driver 'oracle.jdbc.driver.OracleDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@w4inpusyga6:1521:XE': SAPClassNotFoundException: oracle.jdbc.driver.OracleDriver'
All your inputs are welcome!
Thanks
Mugdha Kulkarni

Hi
we are integrating XI with IBM DB2 database.
we have used 2 Jar files ( DB2jcc4.jar & DB2jcc.jar ).
but after deployment the jar file was deployed in different location, not in D:\usr\sap\XR3\DVEBMGS00\j2ee\cluster\server0\bin\ext\
trying many times this deployment, we manually copy/paste
our driver jar file to legitimate directory..
Now the error has change as .UnsupportedClassVersionError: com/ibm/db2/jcc/DB2Driver (Unsupported major.minor version 50.0)
Any one could through some light on it..
Regards,
Ashutosh
Edited by: ashutosh rawat on Dec 5, 2009 4:48 AM

JDBC adapter - Oracle

Hello all,
I am trying to build a scenario that uses the JDBC adapter in two communication channels to connect to Oracle databases. I am having difficulty connecting to the database so I have a few questions:
1. Does a driver get installed with the XI installation that allows me to connect to Oracle databases, or do I have to install that driver seperately?
2. What connection info do I put into the communication channel when it asks for JDBC Driver and Connection?
Thanks in advance

Harrison
Does a driver get installed with the XI installation that allows me to connect to Oracle databases, or do I have to install that driver seperately?
>> you need to install it separately in XI using SDM tool .
What connection info do I put into the communication channel when it asks for JDBC Driver and Connection?
>> you need give driver details and connection like databaseservername,databasename,port.which driver ur uisng.
check this blog for how eneter driver and connection details
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30

Need to connect to Oracle 11g using PI 7.1 JDBC adapter

Hi All,
I am trying to configure a JDBC adapter to connect Oracle 11g. For this I need to know the driver,jar and connection URL details.
Can anyone please provide the above information?
Please correct me if my details are wrong :
JDBC Driver : oracle.jdbc.driver.OracleDriver
JAR : ojdbc5.jar
URL : jdbc:oracle:thin:@localhost:1521:ora11i
Regards,
Prakash.

Yes i knew how to deploy the jars using SDA.
I will try to deploy the above jar (ojdbc5.jar ) and try to connect to Oracle 11g with URL & Driver classname.
If I face any problem then i will get back to you.

Is it necessary to have oracle client installed for remote access thru' jdbc type2 driver?

If I want to use oracle oci type 4 driver, do I need to install oracle
client?
or is it sufficient to put dll in classpath and classes12.zip in
classpath.
I can then specify in jdbc url the host:port:sid and not use the alias
from tnsnames.ora
I will be connecting to remote oracle database ofcourse.
Komal.

you need the Oracle client libraries installed.
And the easiest way to do this is to make an oracle client installation.
the DLL files should be in your PATH, not classpath.
Filip
~
Namaste - I bow to the divine in you
~
Filip Hanik
Software Architect
[email protected]
www.filip.net
"komal mangtani" <[email protected]> wrote in message
news:[email protected]..
sorry for the typo, I meant type 2 driver
komal mangtani wrote:
If I want to use oracle oci type 4 driver, do I need to install oracle
client?
or is it sufficient to put dll in classpath and classes12.zip in
classpath.
I can then specify in jdbc url the host:port:sid and not use the alias
from tnsnames.ora
I will be connecting to remote oracle database ofcourse.
Komal.

How to install Oracle Content Database Archive Adapter for SAP on windows

Hi,
I would like to install CDAA(Oracle Content Database Archive Adapter) on 32 bit and 64 bit windows. Will somebody point me to where i can download this from (if its not free i would like to try out trial version first) . If it depends upon other oracle components what is that i need to install additionally . And if you could provide links to all the required components, it would be great help.
Also if there is any demo from where i can see what all features CDAA support and how does it compare to other products say IBM commonstore etc , please let me know.
Thanks a lot ..
-Rohit

Can any body help me to say thet "How to install Oracle Applications 11i(11.5.10.2) on Windows 2003 R2 X64 bit ' . Hi,
I believe, 11i installation on Windows 2003 X64 is not fully supported.
what is your os version:
if it is windows 2003 32 bit, then it is supported on X86-64 servers for both database and application tiers
If it is windows 2003 64 bit, then only datatabase tier is supported on x86-64 servers
Have a look at the following note
Frequently Asked Questions: Oracle E-Business Suite Support on x86-64 Doc ID: 343917.1
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=343917.1

Access an Oracle DB using JDBC adapter

Hi, I'm trying to make an simple test for checking if the connection between XI and Oracle DB is working fine and following the weblog nr. 2018 ( Save Time with generalized JDBC datatypes ) i've made my structures in order to achived that. I've declared the field action as SELECT than the table name ... and in the IB set the needed configurations. So when i exec my interface i've got the black/white flag bur if i look at the adapter engine i see that the JDBC adapter is achieved but i got 2 errors " No 'action' attribute found in XML document('action' attribute missing or wrong XML structure) and Exception caught by adapter framework: error processing request in sax parser: No 'action' attribute found in XML document('action' attribute missing or wrong XML structure). Can anybody provide me some help ??? Thanks in advance.
JMMatos

Hi,
This is how my DT looks like:
Structure Category Type
Data_JDBCReceiver Complex Type
Statement
 Table_name
 action Attribute
 table
 access Data_FileSender
 cod
 key Data_FileSender
 cod
This is my DT and in MM i fill field action with constant value(SELECT/INSERT), field table with the name of the corresponding DB table, fields access/key with constant value(empty). At this moment, I got the following error Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'v01_sap_xi' (structure 'Statement'): java.sql.SQLException: FATAL ERROR: Column 'cod' does not exist in table 'v01_sap_xi'; according with the people responsible for the DB this column named cod does really exist !! What can I do ?!?!? Some help will be ... Thanks !!!

Executing an Oracle Stored Procedure from Sender JDBC adapter

I could really use some help from someone who had done this before.
I've read the help about using the JDBC sender adapter, but it's not helping enough.
I found this line: "Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs."
That's definately what we want to do, but we can't figure out the syntax.
The procedure in oracle looks like this:
CREATE OR REPLACE PROCEDURE test_ref_cursor
( cur_generic IN OUT result_sets.cur_generic)
as
BEGIN
Open cur_generic for
select
 proposal_number,
 to_char(sequence_number),
 column_name,
 column_value,
 update_timestamp,
 update_user
 from
 coeus.sap_test;
END test_ref_cursor;
And we have tried every kind of statement we can think of, but the file adapter always gives us an "invalid sql statement" error.
Does anyone know what syntax we need to put in the "Query SQL Statement" in the JDBC sender adapter in order to call this procedure? Or is there something wrong with the procedure that is causing the error?
I will absolutely return and give points, but PLEASE read my whole post before answering and do not just link me to or quote the help for configuring a sender JDBC adapter or blogs that are about the JDBC adapter in general but do not deal with the issues I am having. Thank you.

Hi Vanda,
Unfortunately, the sender JDBC adapter does not support Oracle's store procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.
There are 2 possible ways you can accomplish this:
1. Use BPM and call the Oracle stored procedure using a receiver adapter via a asynch-synch bridge.
2. Develop a user-module for the adapter, which can be used with a sender adapter.
Thanks
Prasad

Reciever JDBC Adapter error (Oracle)

Hi,
I am trying FILE-XI-JDBC Scenario to get data loaded in Oracle. I have configured the reciever adapter in Communication Channel but while sending the message i am getting the following error:
com.sap.aii.af.ra.ms.api.DeliveryException: JDBC Adapter configuration not initialized: null
Can anyone guide me what needs to be done here?
Below are the settings that i am using:
JDBC Adapter: jdbc:oracle:thin:@<ipaddress>:<port>
Connection: oracle.jdbc.driver.OracleDriver
Thanks,
Rajneesh

i am getting the following error:
>>>>com.sap.aii.af.ra.ms.api.DeliveryException: JDBC Adapter configuration not initialized: null
means connection to ORACLE DATABASE is not established.....check whethere oracle database is working or not...
2) check DATABASE CONNECTION fields....
jdbc driver and connection....
JDBC receiver
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
How to use SELECT statement in JDBC scenario's.
Ref : https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1725 [original link is broken] [original link is broken] [original link is broken]
stored procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures by siva
Best Regards,
Srikanth
Reward the useful answers and you will get one point yourself
/people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself ---onepoint blog

NCHAR issue with oracle database using JDBC adapter

Hi,
We have a requirement to develop an XI interface from FTP server(File adapter) to oracle database using JDBC adapter. In the oracle database table few fields are of type NCHAR/NVARCHAR. when we try to insert the character(A,B,c..) values into oracle table fields of type NCHAR/NVARCHAR, we are getting the following error message in the JDBC adapter audit log. IF we pass the numeric value to the same field, then we are able to insert the records successfully.
Unable to execute statement for table or stored procedure. 'IPCSDD_DOWNLOAD_PROCESS' (Structure 'StatementName1') due to java.sql.SQLException: ORA-00904: "P": invalid identifier
2010-10-19 22:29:59 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'IPCSDD_DOWNLOAD_PROCESS' (structure 'StatementName1'): java.sql.SQLException: ORA-00904: "P": invalid identifier
2010-10-19 22:29:59 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'IPCSDD_DOWNLOAD_PROCESS' (structure 'StatementName1'): java.sql.SQLException: ORA-00904: "P": invalid identifier
Please find the system information below.
Oracle version- 10.2.4
XI version - 3.0/ service pack 19
JDBC driver- oracle.jdbc.driver.OracleDriver
Please suggest.
Thanks,
Venkata
Edited by: Venkata Narayana Eepuri on Oct 21, 2010 12:10 AM

Dear Venkata Narayana,
Concerning the error, kindly go through the following note :
731 - Collective note: ORA-00904
follow the recommendations mentioned in that and please check if that helps.
Best Regards
Nishwanth

Installing Oracle 9.0.x JDBC adapter in XI 3.0

Similar Messages

Maybe you are looking for