Installing python-umdifftools

A bit of a noob question.
Numdifftools stopped working so I used yaourt to re-install it. It didn't work so I looked at the pkgbuild. It had python setup.py install rather than python2 setup.py install, to reflect the change since Python 3.0 has been installed. Obviously this was trivial to fix, but should this be changed in the pkgbuild or is python setup.py install preferable for most people. If it should be changed am I suppose to notify someone to change it?

See the wiki:
Q: Foo in AUR is outdated; what do I do?

Similar Messages

How to install Python 2.0 on N97 mini?

My Nokia N97 mini offers me to install Python for S60 2.0 . But the installation with "Softwareaktualisierung" fails .
Unfortunately there's no information why the installation failed . Is there a log anywhere where I can get some more
information?
Or can I download Python 2.0 somewhere and install it manually?
Note that I installed Python 1.9.7 manually on the phone - but the installations also fails after manually removing
Python 1.9.7
regards
Bernd

The later versions of Python have had issues installing. I'm using 1.4.5 without any problems.
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

Problems installing python-chess

I need to install python-chess package:
https://pypi.python.org/pypi/python-chess
The author states the following is needed for installation:
Building
libboost-regex-dev and libboost-python-dev are required.
I assume that he's talking about ubuntu based systems. I have boost installed, but am not sure do I need something else:
pacman -Ss boost
extra/boost 1.54.0-4 [installed]
Free peer-reviewed portable C++ source libraries - Development
extra/boost-libs 1.54.0-4 [installed]
Free peer-reviewed portable C++ source libraries - Runtime
community/boost-build 2.0_m12-5 [installed]
Boost build system
During installation, using easy_install I get the following warning, but it seems to install ok:
easy_install --user python-chess
Searching for python-chess
Reading https://pypi.python.org/simple/python-chess/
Best match: python-chess 0.0.5
Downloading https://pypi.python.org/packages/source/p/python-chess/python-chess-0.0.5.tar.gz#md5=456efb47a1431c16472b27063269e85b
Processing python-chess-0.0.5.tar.gz
Writing /tmp/easy_install-skh87f/python-chess-0.0.5/setup.cfg
Running python-chess-0.0.5/setup.py -q bdist_egg --dist-dir /tmp/easy_install-skh87f/python-chess-0.0.5/egg-dist-tmp-xfxhpk
Not SVN Repository
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
zip_safe flag not set; analyzing archive contents...
__pycache__.libchess.cpython-33: module references __file__
Adding python-chess 0.0.5 to easy-install.pth file
Installing ecotool.py script to /home/ed/.local/bin
Installed /home/ed/.local/lib/python3.3/site-packages/python_chess-0.0.5-py3.3-linux-x86_64.egg
Processing dependencies for python-chess
Finished processing dependencies for python-chess
Finally, it seems that installation is finished but I get an error:
import chess
import chess
ImportError Traceback (most recent call last)
<ipython-input-1-31dd7659fda0> in <module>()
----> 1 import chess
/home/ed/.local/lib/python3.3/site-packages/python_chess-0.0.5-py3.3-linux-x86_64.egg/chess/__init__.py in <module>()
28
29 # Import from libchess.
---> 30 from libchess import START_FEN
31 from libchess import opposite_color
32 from libchess import Square
ImportError: /usr/lib/libboost_python.so.1.54.0: undefined symbol: PyClass_Type
Btw, the library works fine with python 2.7.
Last edited by enedene (2013-11-28 14:10:33)

Python is not an app, it's an operating programme, like Flash or Java, you won't get an icon. By the way, why do you want Python ? I have it and it makes a novelty Beer programme fill screen then empty when tilted ! Only bothered with it because I have a mate who thought his fruit based product was the best thing since sliced bread, worry about Python if you find something you really want that requires it to work !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Problems installing Python for S60 v2.0

When I try to install Python for S60 v2.0 (from the program update on the phone) I get this error:
1 update could not be installed. Close some programs and try again.
But I don't have any other open programs!
I have Nokia N78
Message Edited by Mikaelft on 21-Dec-2009 12:46 PM

Python is not an app, it's an operating programme, like Flash or Java, you won't get an icon. By the way, why do you want Python ? I have it and it makes a novelty Beer programme fill screen then empty when tilted ! Only bothered with it because I have a mate who thought his fruit based product was the best thing since sliced bread, worry about Python if you find something you really want that requires it to work !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

[FIXED]Problems installing python-numeric, pycairo and pygtk

I'm getting these errors when installing these dependencides for gimp:
[root@Darkstar ~]# pacman -Sf python-numeric
Targets: python-numeric-24.2-1
Total Package Size: 0.6 MB
Proceed with upgrade? [Y/n]
checking package integrity... done.
loading package data... done.
installing python-numeric... db_write: Input/output error
error updating database for python-numeric!
Without -f it says that already exists some files in system:
[root@Darkstar ~]# pacman -S python-numeric
Targets: python-numeric-24.2-1
Total Package Size: 0.6 MB
Proceed with upgrade? [Y/n]
checking package integrity... done.
loading package data... done.
checking for file conflicts...
error: the following file conflicts were found:
python-numeric: /usr/include/python2.4/Numeric/arrayobject.h: exists in filesystem
python-numeric: /usr/include/python2.4/Numeric/f2c.h: exists in filesystem
python-numeric: /usr/include/python2.4/Numeric/ranlib.h: exists in filesystem
python-numeric: /usr/include/python2.4/Numeric/ufuncobject.h: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric.pth: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/ArrayPrinter.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/ArrayPrinter.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/FFT/FFT.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/FFT/FFT.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/FFT/__init__.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/FFT/__init__.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/FFT/fftpack.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/LinearAlgebra.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/LinearAlgebra.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/MA.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/MA.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/MA_version.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/MA_version.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/__init__.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/__init__.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MLab.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MLab.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Matrix.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Matrix.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Numeric.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Numeric.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Numeric_headers/__init__.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Numeric_headers/__init__.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Precision.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Precision.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RNG/RNG.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RNG/Statistics.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RNG/Statistics.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RNG/__init__.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RNG/__init__.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RandomArray.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RandomArray.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/UserArray.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/UserArray.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/_numpy.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/arrayfns.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/lapack_lite.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/multiarray.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/numeric_version.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/numeric_version.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/ranlib.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/umath.so: exists in filesystem
errors occurred, no packages were upgraded.
This happened also to the other 2, pygtk i installed with pacman -Sdf pygtk and it installed but the others gave me that error.

it looks like a database problem, like it has no record of the package being installed previously and cannot write to it again after the update. Anything irregular with your permissions to /var/lib/pacman/local? I would try deleting the offending database entries in /var/lib/pacman/local/<pkgname> and reinstalling each again.

Can we install python 2.6 or 2.7 tool on exadata (x4-2) machine?

can we install python 2.6 or 2.7 tool on exadata (x4-2) machine?

Hi Guys
thanks for your help to conclude my issue.
we got response from oracle support for the same.
"Upgrading the installed python version is not supported. There are dependencies with certain exadata utilities like dcli which does not support Python version 2.6 or later. "
thanks
jatin

[SOLVED] Terminator, "you need to install python bindings for libvte"

Upgrade terminator to 0.96-3, with new dependency to vte3.
It suggested to remove vte, which is not needed any more. So I followed the suggestion.
Then I can't open terminator! Got a error dialog "You need to install python bindings for libvte".
Finally, I installed the vte package to fix it.

Indeed, vte is still required.

[SOLVED] Cannot install python per instructions in Beginner's Guide.

So, the overview:
I just finished installing as per the Beginner's Guide and have logged in as root.
I've enabled a couple mirrors in /etc/pacman.d/mirrorlist
Doing NOTHING ELSE I run the following command: "pacman -Sy" python and the result:
python package not found, searching for group...
error: 'python': not found in sync db
After that I tried another suggestion I saw here on the forum: pacman -Sy and then pacman -Syy
Nothing. I thought maybe I botched something on the install, so I did it again. Same result. I cannot get pacman to install python (or ruby) or anything.
What gives?
Last edited by cult hero (2010-01-10 04:51:42)

Yes. If no mirrors are uncommented a different error comes up. (no servers configured for repository)
error: failed to syncronize any databases

Error 0*80072ee7 while installing Python.

Every time I want to install Python I get this error(0*80072ee7) in both Windows 7 & 8.

Hello,
The TechNet Wiki Discussion Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Error when installing Python.

I'm trying to install Python on my mac, but every time at the end of the install I get this error:
"The following install step failed: run postflight script for Fix system Python."
So... yeah. I've had my Mac for all of 5 days now, so keep the chat mundane please.

I think there is a possibility that the installation has been almost completed and you can ignore the error message. Did you try using python?
Where did you get the installer? If you are using "python-2.5.1-macosx.dmg" from http://www.python.org/download/, then you can exclude "Fix system Python" (not needed on Leopard) from the installation. Start the installer by double clicking "MacPython.mpkg", and push "Customize" button after you selected the volume into which you want to install. In the "Custom Install" window, just uncheck "Fix system Python".

[SOLVED] Issue while trying to install python-distribute

I am facing this problem where i am trying to install python-distribute but pacman is trying to install python-setuptools. Can any one help on what is going wrong here?
[nsm09@asecretplace pynote]$sudo pacman -S python-distribute
resolving dependencies...
looking for inter-conflicts...
Packages (1): python-setuptools-2.0.1-1
Total Installed Size: 2.30 MiB
:: Proceed with installation? [Y/n]
Last edited by nsmathew (2013-12-27 17:43:54)

Thanks. Had a look at the PKGBUILD for python-setuptools, it is marked to replace python-distribute.
Thing was, I was trying to install python-prettytable from AUR which has python-distribute as makedepends via the wrapper 'packer' and this was failing.
Now tried the manual install for python-prettytable via makepkg -s and it was able to resolve the dependency correctly.
So could be an issue with packer in resolving such dependencies.

Installing Python 3.1.1

Looking for help on installing Python 3.1.1 on 10.5.x and 10.6.x. Has anyone done this successfully and can share the steps?
Thanks !

Well, sallied forth and got it to work ( I believe ):
Got 3.1.1 from
http://www.python.org/download/releases/3.1.1/
untarred in ~/Downloads:
tar xvf Python-3.1.1.tar
Then within the Python-3.1.1 directory ran:
$ ./configure --enable-framework MACOSXDEPLOYMENTTARGET=10.5 --with-universal-archs=all
$ make
$ make test
$ sudo make frameworkinstall
Finally, to fix the PATH, added this to ~/.profile
export PATH=/Library/Frameworks/Python.framework/Versions/3.1/bin:$PATH
from command prompt
$ python3.1
launches new version ...
Some modules don't seem to work..but the goal was to just get it running and this seemed to do it...
This was on 10.5.8 BTW

Install Python Distutils?

Any way to install distutils in my mac's python? Without distutils I can't use GNU Mailman. Here's what I get when running ./configure:
checking for python... /usr/bin/python
checking for --with-python... no
checking Python interpreter... /usr/bin/python
checking Python version... 2.6.1
checking Python's email package... ok
checking Japanese codecs... ok
checking Korean codecs... ok
checking that Python has a working distutils... configure: error:
***** Distutils is not available or is incomplete for /usr/bin/python
***** If you installed Python from RPM (or other package manager)
***** be sure to install the -devel package, or install Python
***** from source. See sec. 15.1 of the Installation Manual for
***** details

Error encountered when attempting to...: Apple Support Communities

Howto Install Python?

can anyone tell me how to install python on os-x?
i tried to run blender but it seems that there's no python installed on my pb (see terminal text below)
i went and downloaded python 2.4.3 for os-x but since there's no installer it makes it a bit difficult for me to know how to do it.
thanks for help in advance
Last login: Fri Jul 28 07:47:18 on ttyp1
/Users/M/Desktop/blender.app/Contents/MacOS/blender; exit
Welcome to Darwin!
m1b:~ M$ /Users/M/Desktop/blender.app/Contents/MacOS/blender; exit
dyld: Library not loaded: /Library/Frameworks/Python.framework/Versions/2.4/Python
Referenced from: /Users/M/Desktop/blender.app/Contents/MacOS/blender
Reason: image not found
Trace/BPT trap
logout
[Process completed]

can anyone tell me how to install python on os-x?
i tried to run blender but it seems that there's no
python installed on my pb (see terminal text below)
Normaly Python is already installed on your mac (if you have 10.3 or above)
Open a Terminal window an type "python"
if you get a text that looks like this, python is installed:
#Python 2.4.3 (#1, Apr 7 2006, 10:54:33)
#[GCC 4.0.1 (Apple Computer, Inc. build 5250)] on darwin
#Type "help", "copyright", "credits" or "license" for more information.
Some different Mac's/different OS's Mac OS X (10.4.7)
Some different Mac's/different OS's Mac OS X (10.4.7)

Cant install python modules.

Hi, i have just started using berkeley db xml, and i'd like to use the python bindings ('im more cumfortable with python rather than java or c++).
But, when i follow the procedure (as in README in dbxml-2.5.13/dbxml/src/python/bsddb3-4.8.0/README)
i get the error:
python setup.dbxml.py build
running build
running build_py
running build_ext
building 'bsddb3._pybsddb' extension
gcc -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -fno-strict-aliasing -fno-common -dynamic -DNDEBUG -g -O3 -DPYBSDDB_STANDALONE=1 -I../../../../install/include -I/Library/Frameworks/Python.framework/Versions/2.6/include/python2.6 -c Modules/_bsddb.c -o build/temp.macosx-10.3-fat-2.6/Modules/_bsddb.o
In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4,
from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85,
from Modules/_bsddb.c:92:
/Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory
In file included from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/unicodeobject.h:4,
from /Library/Frameworks/Python.framework/Versions/2.6/include/python2.6/Python.h:85,
from Modules/_bsddb.c:92:
/Developer/SDKs/MacOSX10.4u.sdk/usr/include/stdarg.h:4:25: error: stdarg.h: No such file or directory
lipo: can't figure out the architecture type of: /var/folders/ny/nydPeoc+Ghy00a8WqC3IU++++TI/-Tmp-//ccJWWHQZ.out
error: command 'gcc' failed with exit status 1
thanks.

I see you are on a mac - building these packages with the default install can be a major PIA. I recommend starting with a fresh python install instead of the system one just to make sure std packages don't get messed up. Also, make sure you have mac dev tools/env installed so you get the right gcc version.
hth,
eleddy

Installing python-umdifftools

Similar Messages

Maybe you are looking for