[FIXED]Problems installing python-numeric, pycairo and pygtk

I'm getting these errors when installing these dependencides for gimp:
[root@Darkstar ~]# pacman -Sf python-numeric
Targets: python-numeric-24.2-1
Total Package Size: 0.6 MB
Proceed with upgrade? [Y/n]
checking package integrity... done.
loading package data... done.
installing python-numeric... db_write: Input/output error
error updating database for python-numeric!
Without -f it says that already exists some files in system:
[root@Darkstar ~]# pacman -S python-numeric
Targets: python-numeric-24.2-1
Total Package Size: 0.6 MB
Proceed with upgrade? [Y/n]
checking package integrity... done.
loading package data... done.
checking for file conflicts...
error: the following file conflicts were found:
python-numeric: /usr/include/python2.4/Numeric/arrayobject.h: exists in filesystem
python-numeric: /usr/include/python2.4/Numeric/f2c.h: exists in filesystem
python-numeric: /usr/include/python2.4/Numeric/ranlib.h: exists in filesystem
python-numeric: /usr/include/python2.4/Numeric/ufuncobject.h: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric.pth: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/ArrayPrinter.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/ArrayPrinter.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/FFT/FFT.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/FFT/FFT.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/FFT/__init__.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/FFT/__init__.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/FFT/fftpack.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/LinearAlgebra.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/LinearAlgebra.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/MA.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/MA.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/MA_version.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/MA_version.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/__init__.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MA/__init__.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MLab.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/MLab.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Matrix.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Matrix.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Numeric.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Numeric.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Numeric_headers/__init__.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Numeric_headers/__init__.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Precision.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/Precision.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RNG/RNG.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RNG/Statistics.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RNG/Statistics.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RNG/__init__.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RNG/__init__.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RandomArray.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/RandomArray.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/UserArray.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/UserArray.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/_numpy.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/arrayfns.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/lapack_lite.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/multiarray.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/numeric_version.py: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/numeric_version.pyc: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/ranlib.so: exists in filesystem
python-numeric: /usr/lib/python2.4/site-packages/Numeric/umath.so: exists in filesystem
errors occurred, no packages were upgraded.
This happened also to the other 2, pygtk i installed with pacman -Sdf pygtk and it installed but the others gave me that error.

it looks like a database problem, like it has no record of the package being installed previously and cannot write to it again after the update. Anything irregular with your permissions to /var/lib/pacman/local? I would try deleting the offending database entries in /var/lib/pacman/local/<pkgname> and reinstalling each again.

Similar Messages

Problems installing Illustrator CC (2014) and InDesign CC (2014) on OS X Yosemite

I'm currently having problems installing Illustrator CC (2014) and InDesign CC (2014) on OS X Yosemite. Both applications fail with the message "Installation Failed: The download appears corrupted. Please try again after a few minutes.(-60)".
I've tried uninstalling Illustrator CC and InDesign CC and then reinstalling, but still get the same error message. Other applications in Creative Cloud all install without issues.
Has anyone else experienced this issue and resolved it please?

Sorry for the slow response. My Mac wouldn't boot following a failed Yosemite update. I've since reinstalled Yosemite but the exact same problem persists. My Mac is standalone and not on a managed network.
Thank you for the troubleshooting link. I've tried the recommended fix for the -60 error but it doesn't appear to be possible to download the trial version of Illustrator or InDesign for CC editions. They just trigger the Creative Cloud installer and shortly after the -60 error again.
The problem is still specific to Illustrator and InDesign and I've tried uninstalling all Creative Cloud applications and reinstalling. Every reinstalls except InDesign and Illustrator.

Problems installing python-chess

I need to install python-chess package:
https://pypi.python.org/pypi/python-chess
The author states the following is needed for installation:
Building
libboost-regex-dev and libboost-python-dev are required.
I assume that he's talking about ubuntu based systems. I have boost installed, but am not sure do I need something else:
pacman -Ss boost
extra/boost 1.54.0-4 [installed]
Free peer-reviewed portable C++ source libraries - Development
extra/boost-libs 1.54.0-4 [installed]
Free peer-reviewed portable C++ source libraries - Runtime
community/boost-build 2.0_m12-5 [installed]
Boost build system
During installation, using easy_install I get the following warning, but it seems to install ok:
easy_install --user python-chess
Searching for python-chess
Reading https://pypi.python.org/simple/python-chess/
Best match: python-chess 0.0.5
Downloading https://pypi.python.org/packages/source/p/python-chess/python-chess-0.0.5.tar.gz#md5=456efb47a1431c16472b27063269e85b
Processing python-chess-0.0.5.tar.gz
Writing /tmp/easy_install-skh87f/python-chess-0.0.5/setup.cfg
Running python-chess-0.0.5/setup.py -q bdist_egg --dist-dir /tmp/easy_install-skh87f/python-chess-0.0.5/egg-dist-tmp-xfxhpk
Not SVN Repository
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++ [enabled by default]
zip_safe flag not set; analyzing archive contents...
__pycache__.libchess.cpython-33: module references __file__
Adding python-chess 0.0.5 to easy-install.pth file
Installing ecotool.py script to /home/ed/.local/bin
Installed /home/ed/.local/lib/python3.3/site-packages/python_chess-0.0.5-py3.3-linux-x86_64.egg
Processing dependencies for python-chess
Finished processing dependencies for python-chess
Finally, it seems that installation is finished but I get an error:
import chess
import chess
ImportError Traceback (most recent call last)
<ipython-input-1-31dd7659fda0> in <module>()
----> 1 import chess
/home/ed/.local/lib/python3.3/site-packages/python_chess-0.0.5-py3.3-linux-x86_64.egg/chess/__init__.py in <module>()
28
29 # Import from libchess.
---> 30 from libchess import START_FEN
31 from libchess import opposite_color
32 from libchess import Square
ImportError: /usr/lib/libboost_python.so.1.54.0: undefined symbol: PyClass_Type
Btw, the library works fine with python 2.7.
Last edited by enedene (2013-11-28 14:10:33)

Python is not an app, it's an operating programme, like Flash or Java, you won't get an icon. By the way, why do you want Python ? I have it and it makes a novelty Beer programme fill screen then empty when tilted ! Only bothered with it because I have a mate who thought his fruit based product was the best thing since sliced bread, worry about Python if you find something you really want that requires it to work !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Problems installing Python for S60 v2.0

When I try to install Python for S60 v2.0 (from the program update on the phone) I get this error:
1 update could not be installed. Close some programs and try again.
But I don't have any other open programs!
I have Nokia N78
Message Edited by Mikaelft on 21-Dec-2009 12:46 PM

Python is not an app, it's an operating programme, like Flash or Java, you won't get an icon. By the way, why do you want Python ? I have it and it makes a novelty Beer programme fill screen then empty when tilted ! Only bothered with it because I have a mate who thought his fruit based product was the best thing since sliced bread, worry about Python if you find something you really want that requires it to work !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Problem installing Netweaver 2004s EPC and EP on Windows MSSQL env

Hi,
I am attempting to install Netweaver 2004s EPC and EP in Java on Windows 2003 with MSS 2005 DB.
On phase "DB downtime configuration" "Changing location of tempdb files", we see the below error message.
FCO-00011 The step doTempDBBeforeRestart with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0|doTempDBBeforeRestart was executed with status ERROR .
I was unable to find anything is OSS notes or SDN that addresses this particular issue.
Your help is greatly appreciated.
Regards,
Rick Taylor

long story short:
xp (specially NOT the home version) is not among the supported operating systems to run any sap system...use either windows 2000 server or 2003 server
GreetZ, AH

Problems installing TCL 7.5 and Oracle Intelligent Agent

All
Has anyone had any success in installing TCL 7.5 and Oracle
Intelligent Agent? If so could you please provide a step by step
summary of the installation process. I keep getting error
messages when I run gmake for TCL. I commented out the lines
specified in the instructions. Does one have to use TCL 7.5? I
even tried to run version 8.2 and it restarted my machine while
running gmake test. Maybe it is how I commented the lines. I
used the # character to comment out the lines. Please help. IFve
got everything else running I can even use Net8 and SQL plus
from my Windows NT Client. I now need to be able to use Oracle
Enterprise Manager, which requires TCL 7.5 and Oracle
Intelligent Agent.
Many thanks
null

Thor Erik Jelstad (guest) wrote:
: I am using Oracle 8.0.5.0 and Red Hat 5.2/i386
: When I try to start Oracle Intelligent Agent I receive the
: following error message:
: "DBSNMP: error in loading shared libraries /usr/lib/libtcl.so:
: undefined symbol: stat"
: I have installed TCL package 8.0.3-20.
: Thor Erik Jelstad
I ran into "stat" symbol issues during some builds. I don't
recall if the subject program had to be built, but if so, adding
"-shared" to the cc (for linking) command helps. I think the make
variable is LDCCOM.
-Later.
null

Problem installing then removing Bootcamp and Windows XP on a MacBook Pro

Hello
I've tried to install Windows XP on a bootcamp partition of a machine running Snow Leopard 10.6.8. I've made a FAT32 partition of 32 Gb with Bootcamp utility ( I've tried NTFS partition too ), I run the first part of the install of Windows which runs fine. When the computer reboot for the second part of the install, it stops with a disk error.
After several tries, I've decided to removed the Windows partition. I've used the bootcamp utility for that. The partition is gone, but the computer still try to boot on Windows with, obviously, a disk error, and I have to press Alt to see the System partition and boot under Mac OS. Doing that confirm me that the Windows partition is gone, since I only see the system disk. Any idea to solve this problem ?
Thank you

Select the Mac OS X system in the Startup Disk pane of System Preferences.
(64853)

Problems installing second hard drive and second DVD recorder

I have tried about every combination of tricks to install a second hard drive. I want to add a 250GB, WD IDE hard drive to my 3000J 115 7387A32 on the IDE channel. I have set up the bios then added the drive and the reverse but cannot get computer to boot in either case. It locks on the first screen where is says hit Enter to.... Enter makes the text go away, but nothing after. I am trying to install it as a single drive on the secondary IDE channel.
I know the HD is good as I removed it from another computer. It does have Win XP on it. I will format it using Vista IF I can get it installed.
Basically, I am having the same problems within stalling the second DVD, which is SATA.

Your initial hard drive should be jumpered as Master. When you install a second hard drive it must be jumpered Slave. There should be a diagram on the case of the HD showing the jumper locations.
Power Macintosh G3 and G4: IDE Master and Slave Support and Configuration
http://docs.info.apple.com/article.html?artnum=24342
Power Mac G4: Installing Internal Storage Devices
http://support.apple.com/kb/HT1815
 Cheers, Tom

Problems Installing JAVA 2 SDK and Forte4J CE 3.0 on Win98 - HELP !!!!

I have downloaded JAVA 2 SDK, SE v.1.4.0 and Forte for Java CE 3.0 without any trouble, but when I go to install it, I get stuck at the SDK installation screen, and nothing happens.
I did restart my computer after downoading the file, but that did not help. I have been looking at the installation screen now for about an hour. What do I do? Please, somebody help me.
Thanks.
Iwona

I had a similar problem with J2SDK 1.4.0 and Forte
3.0 on a Win98 box. Realizing that J2SDK 1.4.0 is a
BETA release, I dropped back to J2SDK 1.3.0_02. It
works fine!
Regards,
Mark

Problem Installing NW2004 SP 8 and SP12

Dear Forum,
i'm getting really frustrated.
This is i think now the 7th installation.
5 of it with SP 12. I read every related thread in the forum.....
I'm allways getting error messages. i read the all forum entries, but now i cant find a solution for my problem anymore.
the first 4 attempts i did on an old installation with Win XP usind Drive D:.
All System requirements are fullfilled. On the old installation i allways got an error in the Java installation.
Now i reinstalled my system and i tried to install NW2004 SP 12 on Drive C:.
The installation is allways stopping with 89 % and logfile C:\SAP\NSP\DVEBMGS00\work\sapstart.log and sapstart.trc are filled with pipe_gsoap_accept failed.
The same problem i am getting now with SP 8 (installing from the ordered DVD).
Services XServer, SAPNSP_00, SAPDB: NSP are running and the logfiles are getting bigger and bigger filled only with pipe_gsoap_accept failed....
my firewall is deactivated, DHCP server is available, Hostname doesnt exceed 13 characters, %WINDIR%\system32\drivers\etc\services does not include an entry for the ports 3200, 3600 and 8000.
Does anybody have an idea? Searching for SAP Notes related to pipe_gsoap_accept failed did not bring any note....
I cancelled the installation on SP now and the logfile contains the following:
(May 12, 2008 1:00:11 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 12, 2008 1:00:11 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
(May 12, 2008 1:05:19 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 12, 2008 1:05:19 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks
Jens
Edited by: Jens Hankammer on May 12, 2008 1:08 AM

Hi,
please refer to my first post.
Thanks
Jens

Problems installing CS4 Premium Production and serial numbers

I purchased this suite and electronically downloaded it and used the serial given to me a few years ago. I have a newer computer that I am trying to transfer the suite to. I only had Photoshop CS4 installed on my older laptop (I didn't need the other programs in the suite). I deactivated the program and tried to just reinstall Photoshop CS4 on my newer laptop but when I used the original serial number given to me, it wasn't accepted. I then went to download the entire suite as I had originally done from here: https://adobe.subscribenet.com
I've downloaded all of the components but am having trouble fully installing the suite.
Thanks for any help, I appreciate it.

Thanks. I just figured it out. I had forgotten to unzip all of the folders before starting the install. Serial number worked this time as well.

Are there that many problems installing 10.4.3 and updating ?

I want to update my powerbook G.4 from 10.3.9 but I really need to know that should be OK..since it is really important for work....specailly under keynote. I would like to get the newer system if is more stable and I can take advantatges with it....bu I don´t want any risks....any coments or advice?
Should I do the update?

I really like your idea of clonnig....copying the
exact system into the external harddrive and update,
Should I also clone my documents or to try the new
system is just better to start from the external new
system and work on my normal documents.....and see if
everything works fine.
Standard practice is to do just that. Clone EVERYTHING. This is what Carbon Copy Cloner and SuperDuper!, to name two well-known cloning apps, will do by default.
I have two external harddrives one at home the other
at work and everyday I do incremental back ups with
the Backup from Apple...Should be Ok I hope. So the
process is to update a clone of my system into an
external hard drive and work from it for a while and
if everything works fine update the system on the
powerbook.
That's how I do it.
My last question, when I take my poerbook
to work I will be working under system 10,3,9 and
when I arrive home under 10,4,4 on the same
documents, is that OK or I can get problems by
switching systems on the same documents....
Depends on what documents and which apps. For example, Safari and Mail will be different. Mail in particular will barf if you don't keep things consistent. It may be a pain, but booting from the external drive for a while, no matter where you are, would be best.

Problems installing the new 'Look And Feel' done by Francios Degrelle

I have download the new verison of the new 'Look And Feel' from
http://sheikyerbouti.developpez.com/forms-pjc-bean/LAF/sources/v133/LAF_133.zip
1- I defined a new section in formsweb.cfg named summit in the middle tier (AS 10g Rel2):
[Summit]
baseHTML=base.htm
baseHTMLjinitiator=basejpi.htm
baseHTMLjpi=basejpi.htm
baseHTMLie=baseie.htm
HTMLdelimiter=%
workingDirectory=e:\app\summit
envFile=default.env
IE=JInitiator
escapeparams=true
form=customers_laf
debug=no
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term% useSDI=yes
buffer=no
debug_messages=no
array=no
obr=no
query_only=no
quiet=yes
render=no
pageTitle=Summit
serverURL=/forms/lservlet
codebase=/forms/java
imageBase=DocumentBase
width=100%
height=100%
separateFrame=false
splashScreen=no
lookAndFeel=oracle
colorScheme=blue
logo=no
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
serverApp=default
archive_jini=frmall_jinit.jar
archive=frmall.jar,laf.jar
WebUtilArchive=
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_09/index.html
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-i586.cab#Version=1,4,0,0
2- then I put a copy of the file 'forms.css' in the middle tier in the folder :
apache\apache\htdocs
so as to be on the path and then modified PM$CSS_FILENAME in all forms to be 'forms.css' instead of 'c:\forms.css' and recompiled.
3-I put a copy of the file 'laf.jar' in the folder : 'd\Ora_AS\forms\java' in the middle tier and added this path to the classpath environment variable.
4- I restarted the middle tier and wrote this URL:
http://test/forms/frmservlet/config=summit
the customers form opened but with no background images,I added the following to the URL '&form=test_laf_color_scheme.fmx',the form opened with the default color scheme to 'purple',I changed it from a drop down list to orange and all buttons background color degraded to orange.
My questions:
1-where are the background images ?
2- I cannot compile the 'laf.pll' file to 'laf.plx',when I compile I get this error:
FRm-91507 -internal error
P.S. I read this thread :
FRM-91507 when compiling a library with Forms 6i
and I didn't understand it,where do I change the Forms_Path? in the forms Home release 1 or Forms home release 2?!!!
3-Is the 'forms.css' file properly located? if not? where do I put it?
Sorry for the long scenario but I'm really confused?
Thanks
Mohammad

Hello,
I'm curently out of everything so I cannot answer this one. All I can tell is that images are read from the client machine or jar file. If you want read images from the application server, you need the http:// syntax.
Francois

Have a problem installing my airport extreme and it is asking me for a dsn server

STill ambar light

We cannot breathe in vacuum.. !!
What modem do you have? Make and model?
What broadband method is used if the modem doesn't have this info?? eg, cable, fibre, adsl, wimax, satellite.
How do you have the AE connected to the main router? What mode is it running or how are you attempting to do it?
What version airport utility are you using and on what OS.. eg v6 airport utility on Mavericks, airport utility on ipad, etc.
There are issues with new AE and old utility.. so windows no no.. and old mac OS no no. New AE needs the new Airport Utility.
Give us something to work on and the solution should be fairly easy.

Problem install EHP2 NW (DB2) "update database registry"

Hi, I have problem install EHP2 NW Solaris and db2. in the phase "update database registry".
the log is:
Unable to access application /db2/db2epd/sqllib/adm/db2set. No such file or directory
Failed action: with parameters
Error number 0 error type SPECIFIC_CODE
S.O:
In the directory /db2/db2epd
server: ls
db2_software
only found this file. not such file sqllib.
what happend??
help please.

Hi,
What is your Operating system ?
Please make sure that file system should not be created with cio option but with rw option.
Thanks
Sunny

[FIXED]Problems installing python-numeric, pycairo and pygtk

Similar Messages

Maybe you are looking for