Installing Sun Messaging Server on DMZ Architecture

Hello,
we want to install Sun Messaging Server in a DMZ Architecture and I need know if it is possible to install the Messaging Server on the private network to protect data and users, and a pop agent on the DMZ which allows the public to access to mail accounts.
For this I want to know how to install Sun Messaging Server, so I install two instances of Messaging Server over the DMZ and the other on Private, and then what there components that need be configured in each side (Store, SMTP in Private and POP in DMZ).
Finally Thank you for your understanding.
Good works.
Mabrouk Bouchoucha
GS1 Tunisia

GS1-Tunisia wrote:
we want to install Sun Messaging Server in a DMZ Architecture and I need know if it is possible to install the Messaging Server on the private network to protect data and users, and a pop agent on the DMZ which allows the public to access to mail accounts.This is very-much possible and is in-fact a common deployment. There is an example here:
http://docs.sun.com/app/docs/doc/819-4439/acrqg?a=view
In your case Tier 2 would be inside the DMZ (private network) and Tier 1 outside the DMZ (public network).
For this I want to know how to install Sun Messaging Server, so I install two instances of Messaging Server over the DMZ and the other on Private, and then what there components that need be configured in each side (Store, SMTP in Private and POP in DMZ).MTA + MMP + Webmail daemon go on the private network.
Store + MTA goes on the public network.
Regards,
Shane.

Similar Messages

Sun messaging server 7 installation

Dear All,
I am trying to install sun messaging server 7 on an X86 machine.
However, when i try to run the commpkg install or upgrade i get the below (noting that i am using DS 6.0)
bash-3.00# pwd
/opt/sun/comms/CommsInstaller/bin
bash-3.00# ./commpkg install
-- LOGFILE: /tmp/CommsInstaller_20081218091111.log
Can not find the distro containing the Packages, i.e. could not find
/opt/sun/comms/CommsInstaller/bin/SunOS_i386/ST/Packages
Be sure you are specifying a distro for the SunOS i386 platform
Exiting at /opt/sun/comms/CommsInstaller/bin/../lib/CI/Distro.pm line 64.
Moreover, after installation, i have modified the http port to 81 and once i logged from the browser i got this
Messenger Express has been removed
Messenger Express is not supported in this version of Messaging Server.
What does this mean?
Regards,
Scotty

s@mira123 wrote:
bash-3.00# pwd
/opt/sun/comms/CommsInstaller/bin
bash-3.00# ./commpkg installYou use the ./commpkg command from the directory listed above uninstall the software. If you want to install/upgrade you need to download comm-suite-6, unzip it, and then run the ./commpkg install command from that directory.
You will see that when you unzip the full comm-suite-6 download there is a SunOS_i386 directory which includes all the software that can be installed.
Moreover, after installation, i have modified the http port to 81 and once i logged from the browser i got this
Messenger Express has been removed
Messenger Express is not supported in this version of Messaging Server.
What does this mean?It means exactly what it says. Messenger Express has been removed. It has been deprecated for a few versions now and every single 6.3 patch has said at the end on the patch installation that Messenger Express will be removed in a future version, so does the documentation/release notes:
http://wikis.sun.com/display/CommSuite6/Messaging+Server+7.0+Release+Notes#MessagingServer7.0ReleaseNotes-MessengerExpress
If you want to use webmail you now use either UWC/CE or Convergence as the webmail interface.
Regards,
Shane.

Sun Messaging Server message-store inside zone (container)

Hi Guys,
i'm running Sun Messaging Server 7.3-11.01 (64bit, sparc).
Do you now if message-store inside a zone is supported?
Thank's in advance!
Caius

Yes, it is supported. For more info see [Installing Communications Suite on Solaris Zones|http://wikis.sun.com/display/CommSuite7/Installing+Communications+Suite+on+Solaris+Zones].

Installing Sun Application Server 8.1 on Win2k3 Fails

Hi,
I have tried several times, 8 or more, to install Sun Application Server 8.1 on Win2k3 Server Standard Edition sp1. However, the install places the relevant files onto the disc only to remove them.
The archive I am using is java_es_05Q1_appserver-windows-x86.zip.
I have jdk1.4.2_06 installed however, the installer installs JDK1.5.0.
The only message I receive is displayed in a window:
The wizard was interrupted before Sun Java Enterprise System could be completely installed
Pls Help.
Regds

Hi,
Java ES 2005 Q1 is not supported on Windows 2003.
Please use Java ES 2005 Q4 release.
If you still encounter problems, please provide the following details
- What type of configuration did you choose?
- Was there a Summary.txt file created where you installed Java ES?
(need to see contents of that)
- JDK1.5.04 is required so it is correct behavior that installer is placing that on your disk - further installation will not do this.
- Installation log can be found at
%TEMP%/SunJavaES.log
Reference: Troubleshooting chapter of Install guide.
http://docs.sun.com/source/819-1652/troubleshooting.html#wp999001
Hi,
I have tried several times, 8 or more, to install Sun
Application Server 8.1 on Win2k3 Server Standard
Edition sp1. However, the install places the relevant
files onto the disc only to remove them.
The archive I am using is
java_es_05Q1_appserver-windows-x86.zip.
I have jdk1.4.2_06 installed however, the installer
installs JDK1.5.0.
The only message I receive is displayed in a window:
The wizard was interrupted before Sun Java Enterprise
System could be completely installed
Pls Help.
Regds

Installing sun apps server 7 on redhat 7.3

Firstly I have redhat 9 so can I install the sunapps server 7 on redhat 9 ?
secondly
can I install sun apps server 7 on atleast redhat 7.3?
the document with sun apps says that I can install sun apps server 7 on 7.2
regards
Mishra

Hey Paul,
I'm having problems just installing SUN ONE AS Standard Edition 7.0 on my Redhat 7.2 as ROOT. Did you not get any problems even starting it. It installed okay, but when I initially ran the script to start it (./asadmin start-appserv)... it kept crapping out. I did notice some JMS errors in the log, but I haven't come across any documentation on possible bugs. Thanks in advance,
Tak.

Does Sun Messaging Server support Microsoft Active Directory

Hello,
I just got this qustion. Does Sun Messaging Server work with Microsoft Active Directory?
Thanks.

Please post in the messaging server forum: [http://forums.sun.com/forum.jspa?forumID=708|http://forums.sun.com/forum.jspa?forumID=708]

Sync Sun Messaging Server Address Book with Mac OS X Address Book

Hello,
I am wondering whether there is a way to synchronise my address books inside Sun Message Server and on my Mac?
Does anybody know how do to this? I tried an VCF export of all my contacts from my Mac address book and imported it with the Web mailer interface Sun Java System Communications Express.
The import was done without any errors but all emails and phone data is gone so finally I got several empty contacts.
Is this a known problem? Is there a workaround or a fix available?
Does anybody know a better way for synchronization in both directions and without duplicating all records on a second import?
Thanks in advance and best regards
Thorsten

thoreimers wrote:
I am wondering whether there is a way to synchronise my address books inside Sun Message Server and on my Mac?
Does anybody know how do to this? I tried an VCF export of all my contacts from my Mac address book and imported it with the Web mailer interface Sun Java System Communications Express.
The import was done without any errors but all emails and phone data is gone so finally I got several empty contacts.
Is this a known problem? Is there a workaround or a fix available?Communications Express only supports VCARD 2.1 which may be causing the problem. Have you tried importing into Convergence which supports VCARD 2.1 and 3.0?
You can try the demo site here:
http://commsuite.demo.sun.com:7080/iwc
username: field5
password: cosmo
Are you able to provide an example of a single exported contact that doesn't work (import into CE)?
Does anybody know a better way for synchronization in both directions and without duplicating all records on a second import?If you can find a syncml client that is able to sync records with the Mac Address Book then you may be able to use the Mobile Communications software to sync contact information:
http://wikis.sun.com/display/CommSuite/Sun+Java+Mobile+Communications+Documentation
Regards,
Shane.

Problem installing sun application server 8.2

Hi,
I couldn't still install the 8.2 version.
However I'm trying to install it in Java 1.5.0._05 updated version?
Is there a specific version of Java which is causing the problem?
quoted from my previous email
I tried to reinstall appserver on my localhost and i have a problem: when the installer copied files and start to confgiure domains the following error occured =>>
INFO - unpacked jar file: activation.jar.pack
INFO - unpacked jar file: appserv-assemblytool.jar.pack
INFO - unpacked jar file: appserv-cmp.jar.pack
INFO - unpacked jar file: appserv-ext.jar.pack
INFO - unpacked jar file: appserv-jstl.jar.pack
INFO - unpacked jar file: appserv-rt1.jar.pack
INFO - unpacked jar file: appserv-rt2.jar.pack
INFO - unpacked jar file: appserv-rt3.jar.pack
INFO - unpacked jar file: appserv-rt4.jar.pack
INFO - unpacked jar file: appserv-tags.jar.pack
INFO - unpacked jar file: commons-launcher.jar.pack
INFO - unpacked jar file: commons-logging.jar.pack
INFO - unpacked jar file: deployhelp.jar.pack
INFO - unpacked jar file: j2ee-svc.jar.pack
INFO - unpacked jar file: j2ee.jar.pack
INFO - unpacked jar file: jax-qname.jar.pack
INFO - unpacked jar file: jaxr-api.jar.pack
INFO - unpacked jar file: jaxr-impl.jar.pack
INFO - unpacked jar file: jaxrpc-api.jar.pack
INFO - unpacked jar file: jaxrpc-impl.jar.pack
INFO - unpacked jar file: jsf-api.jar.pack
INFO - unpacked jar file: jsf-impl.jar.pack
INFO - unpacked jar file: mail.jar.pack
INFO - unpacked jar file: relaxngDatatype.jar.pack
INFO - unpacked jar file: saaj-api.jar.pack
INFO - unpacked jar file: saaj-impl.jar.pack
INFO - unpacked jar file: sun-appserv-ant.jar.pack
INFO - unpacked jar file: xsdlib.jar.pack
INFO - unpacked jar file: sun-as-jsr88-dm.jar.pack
INFO - number of merged jar entries: 2671
INFO - number of merged jar entries: 1425
INFO - number of merged jar entries: 2459
INFO - number of merged jar entries: 1169
INFO - Start core server configuration.
ERROR - default domain creation returned following exception:
20.09.2005 12:29:21 com.sun.enterprise.pluggable.PluggableFeatureFactoryBaseImpl getInstance
WARNING: Error loading pluggable features class com.sun.enterprise.admin.pluggable.PEClientPluggableFeatureImpl
java.lang.ClassNotFoundException: com.sun.enterprise.admin.pluggable.PEClientPluggableFeatureImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.pluggable.PluggableFeatureFactoryBaseImpl.getInstance(Plugga bleFeatureFactoryBaseImpl.java:104)
at com.sun.enterprise.cli.commands.BaseLifeCycleCommand.createPluggableFeatureFact ory(BaseLifeCycleCommand.java:97)
at com.sun.enterprise.cli.commands.BaseLifeCycleCommand.<init>(BaseLifeCycle Command.java:67)
at com.sun.enterprise.cli.commands.CreateDomainCommand.<init>(CreateDomainCo mmand.java:65)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessor Impl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructor AccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at com.sun.enterprise.cli.framework.CommandFactory.createCommand(CommandFactory.ja va:57)
at com.sun.enterprise.cli.framework.CLIMain.invokeCommand(CLIMain.java:131)
at com.sun.enterprise.cli.framework.CLIMain.main(CLIMain.java:46)
20.09.2005 12:29:21 com.sun.enterprise.cli.commands.BaseLifeCycleCommand createPluggableFeatureFactory
WARNING: SERVER0009: Pluggable features using class com.sun.enterprise.admin.pluggable.PEClientPluggableFeatureImpl could not be initialized. Server will run with default features.
CLI130 Could not create domain, domain1
INFO - End core server configuration.
INFO - Start samples configuration.
INFO - End samples configuration.
INFO - Start Sun Java System Message Queue configuration
INFO - End Sun Java System Message Queue configuration
INFO - Start PointBase configuration
INFO - Java home location configured
INFO - End PointBase configuration
More Information:
Log File: C:\DOCUME~1\jk\LOCALS~1\Temp\Install_Application_Server_8PE_200509201227.log
I get this error, however I deleted the folder c:\sun/AppServer before doing the installation.
Can anyone please help
The version is Java Sun App Server 8.2 version!
Should i delete the file productregistry in the windows32 folder?
Regards,
Manisha

I resolved the problem, the main reason was their was appserv-rt.jar file in the Java lib folder, once this was taken out, it worked perfectly.
Manisha

Problem Upgrading ims 5.2 to Sun Messaging Server 6 2005Q4

I've an ims 5.2 running on an existing Solaris box, arnold. I'm planning to upgrade it to 6.2 on a new box, zion.
I've hit the following error when executing do_the_upgrade.sh.
Please enlighten me what it means.
[zi0n]# sh /var/tmp/UpgradeMsg5toMsg6.ScratchDir/do_the_upgrade.sh
admindomain = ou=portnet.com
encryption.nscertfile = alias/msg-arnold-1-cert7.db
encryption.nskeyfile = alias/msg-arnold-1-key3.db
encryption.nsssl3ciphers = rsa_3des_sha, rsa_rc4_128_md5, rsa_des_sha, tls_rsa_export1024_with_rc4_56_sha, tls_rsa_export1024_with_des_cbc_sha, rsa_rc2_40_md5, rsa_rc4_40_md5
encryption.rsa.nsssltoken = internal (software)
gen.accounturl = http://%[email protected]:2390/bin/user/admin/bin/enduser
gen.folderurl = http://%[email protected]:2390/bin/user/admin/bin/mailacl.cgi?folder=%M
gen.installedlanguages = en
local.ugldapdeforgdn = l=sgsin, o=portnet.com
local.webmail.da.host = arnold.portnet.com.sg
local.webmail.sso.singlesignoff = 0
nsserversecurity = on
service.http.enable = yes
service.http.enablesslport = yes
service.http.port = 80
service.http.sslusessl = yes
service.imap.enable = yes
service.imap.enablesslport = yes
service.imap.sslusessl = yes
service.pop.enable = yes
service.pop.sslusessl = yes
service.readtimeout = 10
Importing to local configfile...
Initializing LDAP connection...
Importing to LDAP...
[07/Jul/2006:00:04:02 +0800] zi0n [20061]: General Error: func=configmsg_setkeys; func=psetSetAttrList; error=Attribute does not exist

Thanks for the explanation.
I've managed to resolve this issue after realising
i've missed out a very critical step. Copying of the
physical mailboxes over to the new server.Yes, that's an important step....
>
I've however hit another issue with the activation of
SSL encryption on the v6.2 messaging server.
the current setup is as follows:
1) Applications installed locally:
- Sun Messaging v6.2 server
- Sun Directory Server 5.2 2005Q4 ( For config store
of messaging server)
- Administration Server 2005Q4
User/groups store is located at a existing Iplanet
v5.2 Directory Server.
3) Service account for Messaging Server v6.2:
uid=mail gid=mail
4) Service account for local directory and admin
server: root
Problem faced:
- I've used the cert wizard from the admin console to
generate a cert request and to install the cert
generated from the CA.
- I've also added the CA cert of the CA that has
generated my server cert.
- Next, i've tried enabled SSL encryption, specifying
the use of my newly added server cert. I've save the
settings before exiting from the admin console.
- However, when i login to the admin console to check
the settings again. SSL encryption is now unchecked.
- I've also facing problem stopping and starting
services using the admin console. Especially after
specifying the SSL ports to use for the imap, pop and
http services.
- When i was finally able to restart the services,
the system did not listen on the specified SSL ports.
It seems that my 'Enable SSL' setting also resets
whenever i exit from the admin console.
Greatly appreciate any help on this. Thanks in
advance.I suggest using configutil instead of the Console.
./configutil -o <setting to be changed> -v <new value>
Console is old and pretty flaky. It's going away in the next version.

Cannot install Sun Application Server with JSC 2

Hello :)
I have been installed JSC 2 update 1 for first time, 2 month ago, but I got a problem so I have to reinstall the JSC 2. I did uninstall and then delete the JSC 2 directory and directory under my Document and Setting/user1/Creator21/
But when I reinstall the JSC 2, I couldnt get Sun App Server to be installed. I tried it 3 times already but I got the same problem, still couldnt install JSC 2.
(Installation was success ,... not error message during installation). I thought it has problem with the registry, so please tell me how to fix this problem.
Thank You !

Sorry, the reply is not related to your query,
but you could try the latest netbeans 5.5 and use the visual web pack plugin..

Installing Sun Directory Server on Windows Server 2008

Has anyone tried installing Sun Java System Directory Server in Windows Server 2008? I am trying to do this but get an error stating that nss3.dll is missing at configuration time.

Windows 2008 is not a supported platform for any DSEE release. Even if you get it working, Sun Support won't be able to help if you have issues.
This issue seems to have been reported on Windows 2000 with DSEE 6.0 too and one workaround is to remove the nss3.dll from c:\winnt\system32 or equivalent directory. Please note this workaround is not targeted at Windows 2008, so use at your own risk.
http://sunsolve.sun.com/search/document.do?assetkey=1-1-6680728-1
Winodws Native DS6.0/ISW6.0 Zip:error could not locate nss3.dll
Edited by: etst123 on Jan 29, 2009 10:39 AM
(added link to bug report)

Clean up queue in SUN Messaging Server 6.3

I have a couple of SUN Messaging servers with each about a 1'000'000 e-mail messages in their queues.
The reason is one of our customers being infected with some trojan, and a firewall misconfiguration which allowed direct access to the SUN messagings servers (where we host our customers mailboxes) , rather then through the Postfix boxes with rate limiting, anti-spam and anti-virus scanning which they are supposed to use as outgoing SMTP servers. In short we were used as a SPAM relay. Grrr.
As you can image the queue is now filled with undeliverable e-mail and undeliverable bounces.
The question is simply can I safely delete the offending messages from the queue directory, because the imsimta qclean does a lousy job.
imsimta qclean -content=<IP-OFFENDER> -delete* found only 75'000 messages from which 20% was removed. A simple grep <IP-OFFENDER> found still thousand of messages in the queue.
Arg, by default imsimta qclean only scans message ID's found in it's own database which is limited in size (and much smaller then our actual queue size)
imsimta qclean -content=<IP-OFFENDER> -directory_tree -delete* scans the actual queue directory and found indeed over a million mail messages in the queue. After scanning for a couple of hours it removed 150'000 messages. Leaving about 85% of the spam mails untouched!
Is it safe to simply use a shell script to find and remove the messages in the queue directory and delete them? Or will that break SUN messaging servers internal queue handler?
TIA
Herman

Hi,
hbruijn wrote:
The reason is one of our customers being infected with some trojan, and a firewall misconfiguration which allowed direct access to the SUN messagings servers (where we host our customers mailboxes) , rather then through the Postfix boxes with rate limiting, anti-spam and anti-virus scanning which they are supposed to use as outgoing SMTP servers. In short we were used as a SPAM relay. Grrr.As an aside, Messaging Server 6.3 also offers rate-limiting capability (metermaid) and various anti-virus/anti-spam capability. I wrote up a general document about this at:
http://msg.wikidoc.info/index.php/Main_Page
As you can image the queue is now filled with undeliverable e-mail and undeliverable bounces. You are not the only forum person to hit such an issue recently:
http://forum.java.sun.com/thread.jspa?threadID=5210669&messageID=9848719
The question is simply can I safely delete the offending messages from the queue directory, because the imsimta qclean does a lousy job. Yes. If the job_controller sees that the message has been deleted, it will simply remove the queued message from its cache and move on. Depending on your log level you may see an entry in the imta log file about this.. something along the lines of file <queue file> no longer exists.
imsimta qclean -content=<IP-OFFENDER> -delete* found only 75'000 messages from which 20% was removed. A simple grep <IP-OFFENDER> found still thousand of messages in the queue.
Arg, by default imsimta qclean only scans message ID's found in it's own database which is limited in size (and much smaller then our actual queue size)By default the job_controller will only keep a maximum of 100,000 messages in cache - a percentage of this is dedicated towards new emails and the rest is queued emails. This limit is to stop the job_controller consuming all your available RAM when you get hit by events such as this. The imsimta qclean uses this cache to search for messages -- which is vastly quicker then (re)scanning so many emails on disk.
The maximum is controlled by the MAX_MESSAGES job_controller.cnf parameter - discussed here:
http://docs.sun.com/app/docs/doc/819-4428/6n6j425uh?l=en&a=view&q=max_messages
and here:
http://docs.sun.com/app/docs/doc/819-4428/6n6j425v7?l=en&a=view#bgajv
imsimta qclean -content=<IP-OFFENDER> -directory_tree -delete* scans the actual queue directory and found indeed over a million mail messages in the queue. After scanning for a couple of hours it removed 150'000 messages. Leaving about 85% of the spam mails untouched! Well I can't explain this off-hand. I would need to try and reproduce the issue in-house with an example email that wasn't matched. What version of MS6.3 are you running (./imsimta version)?
btw. you can use the "-threads=<number from 1-8>" qclean command to speed up the scanning process by running multiple scanning threads.
Is it safe to simply use a shell script to find and remove the messages in the queue directory and delete them? Or will that break SUN messaging servers internal queue handler?Should be fine - once you have removed them though you may want to run:
./imsimta cache -sync
This will kick-off a re-sync of the job_controller cache so that the job_controller is better able to process the remaining emails (rather then hitting missing email after missing email).
Regards,
Shane.

Anybody installed Sun Application Server 7 in linux 8 or linux 9

hi all
i am not able to install Sun one Application Server 7 in linux 8.
i am able to install Sun one Application Server 7 in linux 9 but while starting using command like this
/asadmin start-appserv
Instance domain1:admin-server already started
Could not start the instance: domain1:server1
server failed to start: abnormal subprocess termination
Could not start one or more instances in the domain : domain1
Could not start one or more domains
if anybody installed sun one applicaton server7 in linux 9 ,pls help me .
And also do not know linux 9 support sun one applicaton server7 or not .
replay me

Which Linux distro? Red hat?

Is there any impact chaning ip on sun messaging server?

Hi all,
I have configured and running two sun messaging servers MTA and MS.
e.g
MTA ip address - 192.168.10.1
MS ip address - 192.168.10.2
Is it possible to change ip address on these messaging servers to another ip range? Do I need to change any messaging config file after changing ip address?
Following is my messaging server version:
./imsimta version
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
SunOS mta3 5.9 Generic_118558-34 sun4u sparc SUNW,Sun-Fire-280R
Please let me know. Thanks.

Question was asked (and answered) here:
http://lists.balius.com/pipermail/info-ims-archive/2009-February/016723.html
Regards,
Shane.

SUN messaging server 7.0 HA in cluster 3.2

Hi all,
I Can't start message server resource group
Please follow the link below to assist:
http://forums.sun.com/thread.jspa?threadID=5334751
Thanks!

Hi shane,
>
I had a quick look at the above, I noted the following:
Sep 26 12:26:53 ms1 Cluster.PMF.pmfd: [ID 887656 daemon.notice] Process: tag="msg-rg,msg-rs,1.svc", cmd="/bin/sh -c /opt/sun/
comms/messaging64/bin/start-msg watcher", Failed to stay up.
Are there any error messages in the watcher/default log files to indicate whether/why there was a problem?
Following is the output in the default log:
[26/Sep/2008:12:25:41 +0800] ms1 stored[2498]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) starting up
[26/Sep/2008:12:25:43 +0800] ms1 impurge[2499]: General Notice: impurge started
[26/Sep/2008:12:25:47 +0800] ms1 imsched[2502]: General Notice: starting up
[26/Sep/2008:12:26:53 +0800] ms1 imsched[2502]: General Notice: shutting down
[26/Sep/2008:12:26:53 +0800] ms1 impurge[2499]: General Notice: impurge finished
[26/Sep/2008:12:26:55 +0800] ms1 stored[2498]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) shutting down
[26/Sep/2008:12:31:04 +0800] ms2 stored[2245]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) starting up
[26/Sep/2008:12:31:07 +0800] ms2 impurge[2246]: General Notice: impurge started
[26/Sep/2008:12:31:12 +0800] ms2 imsched[2249]: General Notice: starting up
[26/Sep/2008:12:32:17 +0800] ms2 imsched[2249]: General Notice: shutting down
[26/Sep/2008:12:32:17 +0800] ms2 impurge[2246]: General Notice: impurge finished
[26/Sep/2008:12:32:20 +0800] ms2 stored[2245]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) shutting down
[26/Sep/2008:12:36:20 +0800] ms2 stored[2393]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) starting up
[26/Sep/2008:12:36:22 +0800] ms2 impurge[2394]: General Notice: impurge started
[26/Sep/2008:12:36:27 +0800] ms2 imsched[2397]: General Notice: starting up
[26/Sep/2008:12:37:33 +0800] ms2 imsched[2397]: General Notice: shutting down
[26/Sep/2008:12:37:33 +0800] ms2 impurge[2394]: General Notice: impurge finished
[26/Sep/2008:12:37:35 +0800] ms2 stored[2393]: Store Warning: stored: Sun Java(tm) System Messaging Server STORE 7.0-0.04 64b
it (built Jun 20 2008) shutting down
Following is from watcher log:
watcher process 2488 started at Fri Sep 26 12:25:21 2008
watcher process 2514 started at Fri Sep 26 12:26:56 2008
watcher process 2235 started at Fri Sep 26 12:30:43 2008
watcher process 2261 started at Fri Sep 26 12:32:20 2008
watcher process 2383 started at Fri Sep 26 12:35:59 2008
watcher process 2410 started at Fri Sep 26 12:37:35 2008
Are you able to start the instance outside of cluster control?
ms2@root# /opt/sun/comms/messaging64/sbin/start-msg
Warning: a HA configuration is detected on your system,
use the HA start command to properly start the messaging server.

Installing Sun Messaging Server on DMZ Architecture

Similar Messages

Maybe you are looking for