Installing tonight - Dell D830 - Intel Integrated Video/Dell Wireless

Hi,
I am going to install tonight and I am "ok" with linux. I am tired of all the "one in all solutions", especially when they never work as intended..
I wanted to ask about a couple items, and I have the guide all printed out to go.
1. It appears my video will be fine from what I have read, does anyone have any advice in terms of how to configure xorg.conf and at what point I add in my graphical choice?
2. Is KDEMOD the best option for arch? It looks good, I tried to install Chakra today but the disk kept failing on the partitioning so I am not sure what was going on.
3. Wireless - it looks like I need the fwcutter firmware and have to update the drivers. I would like to use wireless as quickly as possible after my install. Is there a way to get that going asap or only until I have it installed and onine?
Any other "gotcha's" about installing?
THX!!!:D

1.) My advice: don't bother with xf86-video-intel, go straight for xf86-video-intel-legacy. The new one just isn't worth the hassle. Plus, I've actually read that xf86-video-intel-legacy is faster (I don't know if this is true or not, though).
2.) The best choice is whatever works best for you. You should be able to find plenty of debates on which DE is the best. Usually the arguments are KDE vs. GNOME, but Xfce often comes into the mix, and occasionally you might see mention of Enlightenment. LXDE is also worth checking out.
Anyway, if you think KDEMOD might be what you want, go ahead and try it out! It's easy enough to replace if you decide you don't like it. When people ask me what DE to use, I usually recommend Xfce.
3.) I'm sorry, I can't help you there. I run Arch on my desktop, so I don't use wireless. I'm not even sure what you're asking, though.
Any other "gotcha's" about installing?
I recommend having another computer available while you're installing, in case you're not sure what to do next, and need to ask or something.
Good luck, and welcome to the community.

Similar Messages

[SOLVED] Arch Linux install on Dell Inspiron N5110

Hello people!
I`m new to Arch, i installed it a while ago on my desktop PC and it works like a charm, so i want now to install it on my laptop.
I`m wondering if any of you (hopefully) has installed it on a similar laptop, and if he/she can to give me some heads-up before i start the install.
This is my system info:
Product Dell Inspiron N5110
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz
Total Physical Memory 6.00 GB
Video Card - Intel(R) HD Graphics 3000
Video Card - GeForce GT 525M
Network Card - Intel(R) Centrino(R) Wireless-N 1030
Mouse - Dell Touchpad
I really appreciate any info, or suggestions regarding this.
Thanks in advance.
Last edited by bogz (2012-05-15 19:18:18)

The process is very much the same as your desktop install. Just follow the Beginner's Guide and you should be fine. There are, however, a few things you may want to consider (and this applies to laptops in general, not to any specific model): https://wiki.archlinux.org/index.php/Laptop
If it comes with an SSD, you should also read the wiki article on SSD's: https://wiki.archlinux.org/index.php/SSD

How can I install a Dell A10 810 printer on my Macbook?

how can I install a Dell A10 810 printer on my Macbook?
Thanks

Just double-click the zip file to open it.
There is no Mac version of Access, so how you're going to open the Access file remains to be seen.

How do i install a dell 1130 printer to my mac xo s laptop

how do i install the dell 1130 printer onto my mac xo s

Hi there hunna1139,
You may find the information about setting up printers in the article below helpful.
Mac Basics: Printing in OS X - Apple Support
-Griff W.

WLC 5508 : WPA2 enabled SSID - especially Intel & Dell wireless cards are not getting connected

Hi ,
I have one pecular issue in my wireless lan set-up. I have some laptop users who are using below inbuilt wireless adapter/cards :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
1 ) Dell wireless 1397 WLAN Minicard
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
2 ) Intel Centrino Advanced N6200 AGN
above card are having issue with WPA2 enabled ssid connecitivity. strange is , the same users are getting connected to other wep enabled SSID but its not working for WPA2 SSID.
I have external ACS server which is used for radius authentication. Last time I had put same query in support forum did some workaround.
eq. disabling DHCP proxy option in WLC and moving all DHCP scope in external server.
After doing this workaround this mentioned users are still facing issue. I gone through some cisco document and some forums and came across that there is something to be done in " Session Timed Out " optionin WLC
which is default 1800 sec based on that I tried to capture debug outputs for mentioned above problematic clients and user who is working fine .
I gone through the same debug output and observed :
User who is working fine :
Processing Access-Accept for mobile 00:22:5f:8d:55:84
00:xx:xx:xx:xx:xx Setting re-auth timeout to 1800 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:8d:55:84 setting dot1x reauth timeout = 1800
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:8d:55:84 (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:1f:ca:2c:f3:01 to PMKID cache for station 00:22:5f:8d:55:84
New PMKID: (16)
The User / card which is having issue :
Processing Access-Accept for mobile 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Setting re-auth timeout to 0 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:90:a2:ac setting dot1x reauth timeout = 0
00:xx:xx:xx:xx:xx Stopping reauth timeout for 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:90:a2:ac (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:26:cb:1d:fe:31 to PMKID cache for station 00:22:5f:90:a2:ac
New PMKID: (16)
Please suggest me to do workaround.

Hi,
According to output of working as well as not working wireless cards ,
below is my observations :
Not working wireless cards observation :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client passed the L2 authentication and that, after successful association, it is now going into the DHCP_REQD state
Not-working wirelss card :
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 Stopping retransmission timer for mobile 0c:60:76:3e:8c:49
*Apr 06 11:58:15.869: 0c:60:76:3e:8c:49 10.10.232.137 Added NPU entry of type 1, dtlFlags 0x0
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.137 but after that , I am getting below output
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:ea:e0
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy WLAN LOCP EssIndex:2 aid:50 ssid:USTRI_SECURE
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Username LOCP :   U25744
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy IP LOCP: 0xa0ae889
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy CCX LOCP 4
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy MobilityData LOCP status:1, anchorip:0x0
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) State Update from Mobility-Complete to Mobility-Incomplete
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 Clearing Address 10.10.232.137 on mobile
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMmProcessDeleteMobile (apf_mm.c:522) Expiring Mobile!
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMsExpireMobileStation (apf_ms.c:4427) Changing state for mobile 0c:60:76:3e:8c:49 on AP 00:1f:ca:2c:ea:e0 from Associated to Disassociated.
working cards ouput :
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 10.10.232.190 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 Stopping retransmission timer for mobile 00:22:5f:8d:55:84
*Apr 06 12:16:28.042: 00:22:5f:8d:55:84 10.10.232.190 Added NPU entry of type 1, dtlFlags 0x0
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.190 and as expected , I am getting below output
*Apr 06 12:16:28.749: 00:22:5f:8d:55:84 DHCP received op BOOTREQUEST (1) (len 321, port 29, encap 0xec03)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP processing DHCP REQUEST (3)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   xid: 0x6eefbbb8 (1861204920), secs: 0, flags: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   chaddr: 00:22:5f:8d:55:84
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   ciaddr: 10.10.232.190, yiaddr: 0.0.0.0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   siaddr: 0.0.0.0, giaddr: 0.0.0.0
*Apr 06 12:16:28.753: 00:22:5f:8d:55:84 DHCP successfully bridged packet to DS
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:f3:0
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy WLAN LOCP EssIndex:2 aid:10 ssid:USTRI_SECURE
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy Username LOCP : USTR\U17967
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy IP LOCP: 0xa0ae8be
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy CCX LOCP 4
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy MobilityData LOCP status:1, anchorip:0x0
Finally client is getting stuck with DHCP-REQD state ..................
Please look into this and put light on this ............

HT1338 I have the mac os x 10.7.3 and am trying to install a dell v515w printer and am having no luck. Anyone out there got any ideas. Have tried to download the drivers but they don't' work. I read something somewhere about trying the Lexmark. Please

I have a mac os x 10.7.3 and am trying to install a dell v515w printer. Have tried numerous times to find driver, but mac says not compatible. I read something about using a Lexmark driver. Any suggestions???
Thanks so much,

If there is no driver compatible with OX X 10.7 you might want to consider getting a different printer. It may save hair pulling and aggravation.

Windows 7 not install in Dell Inspiron 3531. windows 8.1 already install

Windows 7 not install in Dell Inspiron 3531. windows 8.1 already install. please guide me

Can't get you...Do you like to install Windows 7 on Dell Inspiron 3531 which has Windows 8.1 installed? or, you like to have both Windows 7 as well as Windows 81.?
S.Sengupta, Windows Entertainment and Connected Home MVP

Re: install a dell A960 printer to toshiba laptop

install a dell 960 printer to my toshiba laptop

Hi there hunna1139,
You may find the information about setting up printers in the article below helpful.
Mac Basics: Printing in OS X - Apple Support
-Griff W.

Nvidia Optimus Support under XP - NVS3100mm vs Intel integrated

Hi,
We are currently in the process of evaluating the T510 as our new standard laptop.
We are considdering purchasing teh 4314-9WG model, that has on board both the Nvidia Quadro NVS3100mm, as well as the integrated Intel graphics of the QM57 chipset.
Now normally, the Nvidia Optimus system would enable the user to switch between these 2 graphics "cards" on the fly (as I understand it).
However, our current install image is still based on Windows XP SP3, as there is no driver support for Nvidia Optimus for XP.
Thus, we have the following question:
Will our users be able to use the Intel integrated Graphics by default on XP, even though the Optimus witching will not work.
or in other words:
Is the Optimus driver a pre-requisite for using one or the other video card as default under Windows XP
What will the Laptop due without this driver?
We would accept that for now, users would be bound to only use either the Intel integrated graphics, or the Nvidia Quadro.

I am able to get the NVS3100 working ok under XP, except that is defaults to 16bit color for some reason, which I then have to change manually.
Now, for the Integrated Intel HD Graphics, I do the following:
In the BIOS, under Display, the "graphics device" is set to Integrated Graphics, and the "OS detection for NVIDIA Optimus" is set to disabled.
I am using the latest drivers for Intel HD, 6.14.10.5313
When Windows XP boots, it detects 2 devices:
- Audiodevice on bus for High Definition Audio
- Videocontroller (VGA Compatible)
If I now try to install the intel driver pack ( 6.14.10.5313 ) it will start with the installation for the Intel Turbo Boost Technology Driver. This seems to install without problem.
But when I click finish at teh end of it, nothing else happens.
What I expect is that it would now start the install for the Intel HD Graphics setup. And it simply doesnt.
If I first unpack the executable, i get a folder called DISPLAY6
Inside, I can start an executable called Setup (Intel HD Graphics Installer) But all this seems to do is start the Turbo Boost Technology driver setup again. And afterwards, again, nothing happens.
I have tried it both from a situation where the NVIDIA drivers where previously not installed, and where they where installed and I switched it later. Both give the same results.
Its almost like it doesnt properly detect teh hardware, or cant see that the Intel driver goes with it.
I have also tried to manually install teh driver, by pointing to unknown VGA device to teh unpacked driver location, but it doesnt find any drivers there that it can use.

Ati Mobility HD 5470/Intel integrated hybrid graphics

Hi! I have a Acer TimelineX 5820TZG laptop which has switchable graphics. I am struggling to make Arch work with my dual-graphics configuration, and I have tried a lot of things, but it doesn't work.
Right now I am working with the Intel integrated graphics card but I am not even sure if the Ati is completely switched off (I am afraid it's not, as I read in a lot of posts about switchable graphics).
The first thing I did is installing the open-source drivers for ati (xf86-video-ati) and intel (xf86-video-intel). First I tried to make both cards to work by using the vgaswitcheroo method, I mounted debugfs, modprobed the radeon module and using:
cat /sys/kernel/debug/vgaswitcheroo/switch
I checked that the currently working card is the Intel integrated. I made sure the ATI is switched off by doing
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
(As explained in the wiki for hybrid graphics) and then started the X server. In this case the X server starts and sometimes even starts loading my WM (kde), but eventually the system gets frozen and all I can see is warning messages in the terminal (CPU #1 stuck for 23s!) and I am unable to use another terminal with Ctrl+Alt+Fx or soft-resetting. Some times it gets stuck on a loop, showing a lot of messages in the terminal and not allowing me to kill the process in any way.
Then I tried modprobing 'radeon' and then using
echo DDIC > /sys/kernel/debug/vgaswitcheroo/switch
to enable the dedicated graphics card (Ati) and turning off the integrated one (intel) to see what happens. In this case the X server simply crashes, leaving me with the following log:
187.209]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 187.211] X Protocol Version 11, Revision 0
[ 187.213] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 187.214] Current Operating System: Linux Alejandro-ArchPC 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
[ 187.214] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d5fd73a4-f13f-d001-10bd-71a4f13fd001 rw quiet
[ 187.218] Build Date: 29 December 2014 01:09:58PM
[ 187.219]
[ 187.220] Current version of pixman: 0.32.6
[ 187.223] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 187.223] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 187.228] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 16:17:27 2015
[ 187.275] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 187.276] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 187.276] (==) No Layout section. Using the first Screen section.
[ 187.276] (==) No screen section available. Using defaults.
[ 187.276] (**) |-->Screen "Default Screen Section" (0)
[ 187.276] (**) | |-->Monitor "<default monitor>"
[ 187.277] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 187.277] (==) Automatically adding devices
[ 187.277] (==) Automatically enabling devices
[ 187.277] (==) Automatically adding GPU devices
[ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 187.277] Entry deleted from font path.
[ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 187.277] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 187.277] Entry deleted from font path.
[ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 187.277] Entry deleted from font path.
[ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 187.277] Entry deleted from font path.
[ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 187.277] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 187.277] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 187.277] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 187.277] (II) Loader magic: 0x818d80
[ 187.277] (II) Module ABI versions:
[ 187.277] X.Org ANSI C Emulation: 0.4
[ 187.277] X.Org Video Driver: 18.0
[ 187.277] X.Org XInput driver : 21.0
[ 187.277] X.Org Server Extension : 8.0
[ 187.280] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 187.280] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 187.281] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
[ 187.281] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 187.282] (EE) systemd-logind: failed to take device /dev/dri/card0: Invalid argument
[ 187.283] (--) PCI:*(0:0:2:0) 8086:0046:1025:035d rev 18, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
[ 187.283] (--) PCI: (0:1:0:0) 1002:68e0:1025:035d rev 0, Mem @ 0xe0000000/134217728, 0xdc400000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[ 187.284] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 187.284] (II) LoadModule: "glx"
[ 187.338] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 187.504] (II) Module glx: vendor="X.Org Foundation"
[ 187.504] compiled for 1.16.3, module version = 1.0.0
[ 187.504] ABI class: X.Org Server Extension, version 8.0
[ 187.504] (==) AIGLX enabled
[ 187.504] (==) Matched ati as autoconfigured driver 0
[ 187.504] (==) Matched intel as autoconfigured driver 1
[ 187.504] (==) Matched modesetting as autoconfigured driver 2
[ 187.504] (==) Matched fbdev as autoconfigured driver 3
[ 187.504] (==) Matched vesa as autoconfigured driver 4
[ 187.504] (==) Assigned the driver to the xf86ConfigLayout
[ 187.504] (II) LoadModule: "ati"
[ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 187.504] (II) Module ati: vendor="X.Org Foundation"
[ 187.504] compiled for 1.16.1, module version = 7.5.0
[ 187.504] Module class: X.Org Video Driver
[ 187.504] ABI class: X.Org Video Driver, version 18.0
[ 187.504] (II) LoadModule: "radeon"
[ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 187.504] (II) Module radeon: vendor="X.Org Foundation"
[ 187.504] compiled for 1.16.1, module version = 7.5.0
[ 187.504] Module class: X.Org Video Driver
[ 187.504] ABI class: X.Org Video Driver, version 18.0
[ 187.504] (II) LoadModule: "intel"
[ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 187.505] (II) Module intel: vendor="X.Org Foundation"
[ 187.505] compiled for 1.16.3, module version = 2.99.917
[ 187.505] Module class: X.Org Video Driver
[ 187.505] ABI class: X.Org Video Driver, version 18.0
[ 187.505] (II) LoadModule: "modesetting"
[ 187.600] (WW) Warning, couldn't open module modesetting
[ 187.601] (II) UnloadModule: "modesetting"
[ 187.601] (II) Unloading modesetting
[ 187.601] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 187.601] (II) LoadModule: "fbdev"
[ 187.601] (WW) Warning, couldn't open module fbdev
[ 187.601] (II) UnloadModule: "fbdev"
[ 187.601] (II) Unloading fbdev
[ 187.601] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 187.601] (II) LoadModule: "vesa"
[ 187.601] (WW) Warning, couldn't open module vesa
[ 187.601] (II) UnloadModule: "vesa"
[ 187.601] (II) Unloading vesa
[ 187.601] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 187.601] (II) RADEON: Driver for ATI Radeon chipsets:
<LIST OF CARDS>
[ 187.606] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 187.607] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 187.607] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 187.607] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 187.607] (++) using VT number 1
[ 187.607] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 187.607] (II) [KMS] Kernel modesetting enabled.
[ 187.666] (EE) No devices detected.
[ 187.666] (EE)
Fatal server error:
[ 187.666] (EE) no screens found(EE)
[ 187.666] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 187.666] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 187.666] (EE)
As it didn't work this way, I tried using the closed-source driver for ATI, the one in the Vi0L0 repository. I created the xorg.conf file using aticonfig --initial as suggested in the wiki. the result was Xserver crashing again, leaving me with the following log (which suggests that my system is not compatible with PxP tech by AMD and that I should not use the fglrx driver).
[ 2455.881]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 2455.885] X Protocol Version 11, Revision 0
[ 2455.887] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 2455.888] Current Operating System: Linux Alejandro-ArchPC 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
[ 2455.888] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d5fd73a4-f13f-d001-10bd-71a4f13fd001 rw quiet
[ 2455.891] Build Date: 29 December 2014 01:09:58PM
[ 2455.892]
[ 2455.893] Current version of pixman: 0.32.6
[ 2455.896] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2455.896] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2455.901] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 19:38:17 2015
[ 2455.903] (==) Using config file: "/etc/X11/xorg.conf"
[ 2455.904] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2455.906] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2455.906] (==) ServerLayout "aticonfig Layout"
[ 2455.906] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2455.906] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2455.906] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2455.906] (==) Automatically adding devices
[ 2455.906] (==) Automatically enabling devices
[ 2455.906] (==) Automatically adding GPU devices
[ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 2455.906] Entry deleted from font path.
[ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 2455.906] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2455.906] Entry deleted from font path.
[ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2455.906] Entry deleted from font path.
[ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2455.906] Entry deleted from font path.
[ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2455.906] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2455.906] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2455.906] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2455.906] (II) Loader magic: 0x818d80
[ 2455.906] (II) Module ABI versions:
[ 2455.906] X.Org ANSI C Emulation: 0.4
[ 2455.906] X.Org Video Driver: 18.0
[ 2455.906] X.Org XInput driver : 21.0
[ 2455.906] X.Org Server Extension : 8.0
[ 2455.910] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 2455.910] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2455.911] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 2455.913] (--) PCI:*(0:0:2:0) 8086:0046:1025:035d rev 18, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
[ 2455.913] (--) PCI: (0:1:0:0) 1002:68e0:1025:035d rev 0, Mem @ 0xe0000000/134217728, 0xdc400000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[ 2455.913] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2455.913] (II) "glx" will be loaded by default.
[ 2455.913] (II) LoadModule: "glx"
[ 2455.913] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2455.913] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2455.913] compiled for 6.9.0, module version = 1.0.0
[ 2455.913] (II) LoadModule: "fglrx"
[ 2455.913] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2455.943] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2455.943] compiled for 1.4.99.906, module version = 14.50.2
[ 2455.943] Module class: X.Org Video Driver
[ 2455.944] (II) Loading sub module "fglrxdrm"
[ 2455.944] (II) LoadModule: "fglrxdrm"
[ 2455.944] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2455.944] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2455.944] compiled for 1.4.99.906, module version = 14.50.2
[ 2455.944] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
[ 2455.944] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003
[ 2455.944] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:54
[ 2455.944] (++) using VT number 2
[ 2455.944] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 2455.944] (WW) Falling back to old probe method for fglrx
[ 2455.959] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2456.127] ukiDynamicMajor: found major device number 249
[ 2456.127] ukiDynamicMajor: found major device number 249
[ 2456.127] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2456.127] ukiOpenDevice: node name is /dev/ati/card0
[ 2456.127] ukiOpenDevice: open result is 11, (OK)
[ 2461.962] ukiOpenDevice: open result is 11, (OK)
[ 2461.963] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2461.963] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2461.965] (--) Chipset Supported AMD Graphics Processor (0x68E0) found
[ 2461.965] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 2461.965] (II) fglrx: intel VGA device detected, load intel driver.
[ 2461.966] (II) LoadModule: "intel"
[ 2461.966] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2461.966] (II) Module intel: vendor="X.Org Foundation"
[ 2461.966] compiled for 1.16.3, module version = 2.99.917
[ 2461.966] Module class: X.Org Video Driver
[ 2461.966] ABI class: X.Org Video Driver, version 18.0
[ 2461.966] (WW) PowerXpress feature is not supported on A+I Mux platform. Please uninstall fglrx driver.
[ 2461.966] (EE) this is a Muxless PX A+I platform, we doesn't supported it
[ 2461.966] (EE) No devices detected.
[ 2461.966] (EE)
Fatal server error:
[ 2461.966] (EE) no screens found(EE)
[ 2461.966] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2461.966] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2461.966] (EE)
So I came back to open-source drivers and right now I am working with radeon driver blacklisted and only using the intel driver, but as the radeon is blacklisted, vgaswitcheroo is not created and I don't know if mi ATI card is completely switched off.
As you can see, I have done the stuff suggested in the Acer TimelineX wiki page and it didn't work. I have also tried some other suggested actions I found but still can't get my switchable graphics to work.
I would really like to get both my cards to work completely, so I can switch graphics and restart the X server to get better performance or enhance my batt life depending on which GPU I am using; but at this point I am just fine with turning off the ATI card completely and just work with the intel one (though if there is a method for making both work, I prefer that than just turning a card off).
Sorry for my english!!

Xabre wrote:
Bit offtopic, but when you see a sentence like this:
[ 2461.966] (EE) this is a Muxless PX A+I platform, we doesn't supported it
how can you expect anything from the driver?
You are right, that's why I said that it suggest that my system is not compatible with fglrx. I don't understand why the warning just before that error line says that I should uninstall fglrx because my system is Muxed and that line says that my system is muxless...
Anyways, it doesn't matter, the fact is that fglrx doesn't work, so I will be using the open-source drivers...

Intel Pineview video card & unwanted framebuffer

Hi, I just bought an Intel D510MO motherboard with the new Atom D510, the NM10 chipset and the Pineview integrated video card. Everything works well, but on boot the framebuffer is automatically activated just after disks have been checked, although I didn't add a 'vga=XXX' option in GRUB's menu.lst.
How can I disable this and go back with no framebuffer at all? Is this related with KMS?
Thanks
I attach here some useful infos:
lspci
00:00.0 Host bridge: Intel Corporation Pineview DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Pineview Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
/boot/grub/menu.lst
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/f01db0ed-96b5-4f45-a213-c3cf0e416edd ro
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/f01db0ed-96b5-4f45-a213-c3cf0e416edd ro
initrd /boot/kernel26-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Installed packages
$ pacman -Qs xorg
local/xf86-input-evdev 2.3.2-1 (xorg-input-drivers)
X.org evdev input driver
local/xf86-video-intel 2.9.1-1 (xorg-video-drivers)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xorg-apps 7.5-2
Various X.Org applications
local/xorg-docs 1.5-1 (xorg)
X.org documentations
local/xorg-font-utils 7.5-2
X.Org font utilities
local/xorg-fonts-alias 1.0.2-1
X.org font alias files
local/xorg-fonts-encodings 1.0.3-1
X.org font encoding files
local/xorg-fonts-misc 1.0.0-4
X.org misc fonts
local/xorg-res-utils 1.0.3-3 (xorg)
X.Org X11 resource utilities
local/xorg-server 1.7.3.902-1 (xorg)
X.Org X servers
local/xorg-server-utils 7.5-3 (xorg)
X.Org utilities required by xorg-server
local/xorg-twm 1.0.4-3 (xorg)
Tab Window Manager for the X Window System
local/xorg-utils 7.5-1 (xorg)
Collection of client utilities used to query the X server
local/xorg-xauth 1.0.4-1
X.Org authorization settings program
local/xorg-xinit 1.2.0-1 (xorg)
X.Org initialisation program
local/xorg-xkb-utils 7.5-2
X.org keyboard utilities
local/xterm 250-1 (xorg)
X Terminal Emulator
$ pacman -Qs grub
local/grub 0.97-16 (base)
A GNU multiboot boot loader
$ pacman -Qs kernel26
local/kernel26 2.6.32.3-1 (base)
The Linux Kernel and modules
local/kernel26-firmware 2.6.32.3-1 (base)
The included firmware files of the Linux Kernel

I guess KMS is standard now.
Create some .conf (e.g. modprobe.conf) in /etc/modprobe.d/ and write
options i915 modeset=0
Assuming that Pinetrail is i915. There probably is also a kernel boot command you could find with google.
Any particular reason why you want to disable it?

Dell wireless 1538 802.11 a/g/n adapter

I have a Dell Venue 8 Pro 5830 and I cannot get an internet connection. When I run the Windows network diagnostics I get the message "The Dell wireless 1538 802.11 a/g/n adapter is experiencing driver or hardware related problems".
I have tried everything suggested in the Tablet. What can I do now? I bought the Tablet through Amazon and I live in Venezuela.

I have the same EXACT problem for 3 days.Even with my 5 yr computer experience I still couldn't figure this issue out.Dell rep and I found a temp solution.restart......press f8 nonstop....click on repair......restore it to an earlier time....
this so far is the ONLY thing wev'e tried thats had a temp and pleasing result.let me guess there's a big red x on the bottom right hand corner? also try pressing fn + f2 same time......device manger-right click on dell wireless and disable,then enable.......
ive had my dell inspiron 5423 for 2 1/2 months off of ebay.still has warranty under owner before me.After tons of research I'm thinking either driver I bad,or hardware or when he installed fresh copy of windows 7,he didn't install everything in the correct order (very important thing to do).
If by chance you come across a permanent solution please keep me informed.

Best practice for home setup/Roaming with built-in Dell wireless card?

I have a client with a huge house; I have done a site survey and it will require 3 APs to blanket the entire thing. I am wonderig what the best way to set this up for him would be? He would like to be able to walk around with the house and not lose connectivity. He is attempting to use his built-in Dell wireless card/client. As far as I know, these do not support Cisco roaming. What I have done is setup 3 diffrent SSIDs for each part of the house. Depending on his location he manually connects to the correct AP. Is this the best setup?
I had attempted to set all APs with the same SSIDs but found that the client would not roam and also found it difficult to connect to any of the APs at all. I believe the card was getting confused since there was overlap of the same SSID.

If he has a huge house, I don't think his laptop would be that old and also, the Dell's use the Intel wifi cards. Having all 3 ap's setup for the same SSID is what you should do and don't know why you are having so many issues. I would assume the ap's are on channel 1, 6, and 11 and how is the power setting? Do all these ap's run back to the same switch?

Adobe CS4 OpenGL issues with 10.6.2 and Intel GMA950 video card

I just upgraded to Adobe CS4 and in PS I cannot enable OpenGL. I'm running 10.6.2 on a Macbook with the Intel GMA950 video card.
I was wondering if 10.6.2 does not have the relevant drivers for CS4 to recognize this chipset or that since the video card is integrated (as opposed to a stand alone with the newer Macbooks) that Intel has not update the drivers? It ***** since I cannot use some functions inside PS without OpenGL.

Hello blue20 & welcome to discussions
1.) You can search these forums for the topic of:
Adobe CS4 GMA950
As an example, if you haven't already, in an effort to parse what's already been discussed.
2.) Have you looked at any of the Adobe forums:
http://forums.adobe.com/message/2356530
3.) How many fonts are you working with?
The general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure any 3rd party apps AND plug-ins are Snow Leopard compatible.
An additional measure is to clear the existing font caches:
http://www.macworld.com/article/139383/2009/03/fontcacheclear.html
That said, 10.6.2 release notes have this to say about fonts:
http://support.apple.com/kb/HT3874
Fonts fixes provided for:
• an issue with font spacing
• an issue in which some Fonts are missing
• font duplication issues
• an issue with some PostScript Type 1 fonts not working properly
Good luck in any case.

GLSL support for intel x3100 video cards?

I recently purchased a Lenova Thinkpad T61. I opted for an Intel integrated graphics card (X3100) since I had heard Intel had good open source drivers. Recently, I tried to play with some GLSL (OpenGL Shading Language) programming, but was greeted with segfaults at every turn. I finally downloaded and ran the examples from the bottom of this page: http://www.lighthouse3d.com/opengl/glsl … glexample1
Much to my surprise, they told me "No OpenGL 2.0 support" and "No GLSL support", respectively.
I am using xf86-video-intel-2.2.0-2 and the "Driver" in my xorg.conf is "intel".
Does anyone know anything about this? Am I out of luck hardware wise, or is this just a driver thing? Is support coming anytime soon? Am I using the wrong driver?
Thanks,
Jeremy
Last edited by iggames (2008-02-24 02:56:01)

The GMA X3100 really doesn't have OpenGL 2.0 support, only OpenGL 1.5 support.
See here: http://en.wikipedia.org/wiki/Intel_GMA# … d_chipsets
I really don't know if the GLSL support can be implemented by the driver without OpenGL 2.0 hardware support.

Installing tonight - Dell D830 - Intel Integrated Video/Dell Wireless

Similar Messages

Maybe you are looking for