Instance names arnt working for Global Locator

Hi, i am trying to navigate through my scene, I have several
buttons all with instance names, i would like to have a small tween
before jumping to the next section, i have been trying to use
global locator but it doesnt seem to be working, nort sure if its
the script or the way im using it can anyone help?, The script i
have so far is.
_global.locator;
contact_BT.onRelease = function() {
play();
_global.locator = "contact";
};

CIB?
There is no issue with giving a component an instance name, you have to if you want to reference it from code. The instance name is in the same spot as it is for any display object, in the properties panel...

Similar Messages

Does location based services (LBS) work for international locations (outside the USA)?

Does location based services (LBS) work for international locations (outside the USA)? For example does it work in Canada, European countries etc. Any help is appreciated.

Yes, but possibly limited to coverage of Skyhook database..
Applications that use location services also use the data from Skyhook...
Skyhook is a service that records the MAC addresses of Cell Base stations/towers and wireless access points.
Google Maps vehicles records the wireless AP data at the same time they get street view images.
There was some controversy over this - but they effectively record the location and the MAC address of any AP they find as they drive round. This gets sent to a massive database at Skyhook and is used to either locate without GPS or enhance/aid the GPS information. It's also why the location is always the road outside!
If your location/MAC relationship has not been mapped by Skyhook, Google or others - then the good news is that you can add it - although it can take a month or two at least - to work. The reason is that it depends which database is being used by Skyhook's clients..
Add your Wireless Access Point (or Wireless Router) here: http://www.skyhookwireless.com/howitworks/submit_ap.php
The main website for Skyhook is here: http://www.skyhookwireless.com
Hope that helps...!

SAP Mobile app Stock photo not work for network location

Hi Experts
I found if we use network location path (e.g.
servername\pic folder\) in SAP Business One General Settings -> Path, Picture Folder, then if we logon SAP B1 Mobile app from iPad/iPhone, and try to open stock photo, we will get error:
Processing Failed
Internal server error: contact your system administrator
It looks like it only work for local path, e.g C:\pic
Even we put path as :
local pc name\pic folder, it is also not work.
Any idea about this?
Thanks
Tim

The first link is a temporary fix for a machine that only one or two people will use. This will not fix the Library Machines that some 3000 users can use at anytime. I can not pre-add all these users every time we image a machine. We also loan out laptops and I need these machine to wirelessly login dynamically to the domain. But I also need these machine to allow access if these machine are removed from our campus and the wireless access is not available.
Thank again for the help and I hope someone at Apple can fix this soon. I going to have a hard time telling the client that thay can not use the OS that came with they're machine.

Instance name and Var for Input Text fields

I have several Input Text fields, as a form, linked to a PHP
script for which I require Var's for each field.
But I also need Instance names for each field, so I can fix
the tabIndex.
Yet, everytime I test my movie, the text fields have their
Paths (_level0.fName) written in them.
They are normally blank, and I've tried putting in some text
of my own, but the Var name is still displayed in the text fields.
Is there any way I can stop that from happening, and keep
both the Instance names and Var's in-place.
As far as I know, I need both the Instance name (for the
tabIndex) and the Var (for the PHP script) or is there a way that
the tabIndex and PHP script will work with either of the two?
Thanks
Chaz.

Can you use a different name for ‘instance name’
and ‘var’? That seems to solve the problem but I
don’t know if that helps you in your situation.
For an example;
Instance name: test_txt
Var: test

Where used list doesn't work for global data

Hi,
When i try to do where used list on a constant in an include, it doesn't give the results for classes.
The class contains the include in a method that uses the constant, and the where used list for that constant doesn't find the appearance of the constant in the class.
I tried to look for oss note that solves the problem but i couldn't find any.

I tried to update the navigation index but it still doesn't work. from my debuging i found out that it just doesn't look in classes, all classes. I mean even in the where used itself there is not an option for used in classes. I checked it and it's a generic problem of the where used list for global data.
Edited by: Cohen Lior on Apr 14, 2010 6:52 PM

Drill Through to HFM Works for One Location, Not Another - Same Adapter

Good morning all -
I have two locations that both use the same adapter to load to the same HFM application. One location produces the drill through files, one does not.
I've seen several posts about needing separate applications for multiple adapters, but surely this doesn't apply if the adapter is the same? Am I missing a location specific setting somewhere?
Thanks in advance,
Sarah

This was a stupid mistake on my part. I looked through the output and never saw the A, B, C files get produced, so I assumed it never worked. I failed to notice that we had also always had .err files, which prevents drill through files from being created. I answered my own question on the phone with Oracle support. :)
Thanks for your response.

Get AD group membership doesn't work for global groups

I want to pull the group membership for OBIEE directly from AD.
This has been covered in many blogs and forums, no problem, I've found some user created functions - basically all of it uses
DBMS_LDAP package methods
with one exception that additionally to it also uses
DBMS_LDAP_UTL.get_group_membership
ALL THOSE functions work BUT I've verified it with the actual group membership from AD or adfind tool (http://www.joeware.net/freetools/tools/adfind/index.htm)
The list returned by Oracle packages doesn't match, or to be exact only partially matches the factual AD list.
I've done some research and found there are three types used for defining group's scope by AD:
Domain Local, Global, or Universal
(http://technet.microsoft.com/en-us/library/cc755692(WS.10).aspx)
leaving the first one out of the scope as we don't use it
- I've verified and found ALL missing ONES are defined as GLOBAL
All the Oracle funcitons I've found correctly pulls only UNIVERSAL group memberships and none of GLOBAL
Microsoft documentation says that both of them (Universal and Global) have forest-wide visibility....
and so AdFind can list both..
so why Oracle limits the search to UNIVERSAL ones only?
Maybe it's a matter of initialize those DBMS_LDAP packages differently or passing slightly different parameters??
I've really tried a lot of this code in different combinations but no joy
Has anyone got some ideas?

...I try to block the usage of the command prompt only on this server.
I have the same question as jrv: Why? It doesn't increase security. The command prompt is a program, not a security boundary.
Disabling the command prompt does NOT increase security
-- Bill Stewart [Bill_Stewart]

Performing a mass rename on originals to get rid of backslashes in file names. Worked for most files but failed for some with OSSStatus -43. Can't find any info on error -43. Any ideas?

I'm moving all my managed files to be referenced so I can access from both Aperture and lightroom. Needed to do a rename on 16,000 files to get rid of backslashes in the file names. Most of the time it worked but for 1093 files it gave OSSStatus -43. I've tried googling the error and got nothing. Any ideas where to begin looking?
Thanks
Jim

How are you renaming the files? In the "File > Relocate original file" dialog panel? Are you using a custom name format?
Have you checked in Aperture, if the originals, that are giving you the error message, are still inside the Aperture library?

11G Modplsql Basic Authentication not working for globally identified database users

I have a modplsql dad that uses Basic authentication. When I supply a username and password where the database user is locally defined in the database using the "identified by" syntax the authentication works perfectly and the modplsql app works. When I try to authenticate a database user that is defined in the database using the "identified globally" syntax authentication fails. Any idea on how to get modplsql app to work with users identified via OID?
Thanks,
Phil

Hi,
Before deploying, have you changed:
Application properties -> Deployment
Remove the selection from "Auto Generate and Syncronize weblogic-jdc.xml ....."
Kind Regards

Standard appraisal reports don't work for added goals

the standard reports available from SAP ( 'Export to Excel' for instance) do not work for appraisal documents with free enhancements.
I have a requirement to generate a report that will also include goals added by end-users using the free enhancement 'add new element'.
more so, the report cannot be downloaded to Excel if the appraisal document contains more than 20 appraisal elements. This can easily happen in our case, since employees can add their own goals to the document.
how can we report on appraisal documents with more than 20 elements and added goals?
Tiberiu
Edited by: Tiberiu Sasu on Jan 7, 2011 1:24 PM

I confirmed with sap that this is a system limitation and sap has no plans to resolve it for now. more so, sap is planning to replace the export to excel functionality with an export to PDF function.
my question - has anybody tried to remove this limitation? we need some guide on how to do this... (name of SAP program, code to be enhanced etc)
Edited by: Tiberiu Sasu on Jan 7, 2011 4:59 PM

Buttons null; losing stage instance names

Hello, I apologize if this question has already been asked but as the title states I'm having problems with the instance names of my buttons. I am using Actionscript 3 with Flash CS5. I apologize in advance for being verbose but it'd be best if I explained my problem in detail.
I have my project set up so that everything occurs in one MovieClip and buttons within the MovieClip are clicked to navigate through the MovieClip. The MovieClip contains several frames which are all unique and contain a variety of textboxes, MovieClips, buttons, classes and other custom classes. All of these components are created directly in Flash Professional by dragging them from the library onto the stage inside of the MovieClip.
I then name these components using Flash Professional and use these instance names to work with the components. Usually this works without a problem. However, now that I am using a nested MovieClip for my project many problems are occuring. I have it so that when buttons are clicked, the MovieClip goes to a certain frame via the gotoAndStop(x); command. This works fine but I am having problems accessing the buttons that I have named earlier. It gives a null object reference error and when I trace the button it traces as "null".
Originally I thought that this problem was because the MovieClip had not yet initialized but I had used the ADDED and RENDER event listeners, Timeline scripting, and other methods but the button was still null, leading me to believe that the problem was more than that.
So I used a click event listener that traced the instance names of the components that I was clicking (trace(e.target.name)). I have a total of 8 buttons on the specific frame of my MovieClip so I clicked on them all. 6/8 of the buttons traced the correct instance name that I had given them whereas the other two buttons traced "instance 169" and "instance 177" instead of the instance name.
With all this strangeness, I commented out the code for these 2 specific buttons to see if it would work without them. Sure enough it did.
I believe that my buttons have lost their stage instance names and I do not know how to fix this problem. I have tried deleting the buttons and creating them again but to no avail. It does work, however, if I use the Button component that Flash has but I do not want to do that because I'd like to use my own custom buttons (I know the Button component is customizeable, but I'd like to use my own anyways).
If anyone could help, please how can I fix this problem? If my .fla or specific code needs to be provided, I can do so.

Without looking at your code I can't say 100% what is going on. However, I suspect what is happening is that you're doing the following:
Your button is on stage in frame 1
You add an event listener to that button
At some point, you go to a frame where the button does not exist.
When you come back to frame 1, your listener doesn't work anymore
Or some variation of above, where an instance was on the stage, is removed, and even though it appears to have been added back you can't reference it anymore. I've discussed fixes for this issue in depth in this article, but it all boils down to the fact that when the object is removed from the stage the variable that contained the instance the first time will go to null, and then when you go back to the frame with the instance on it, the variable will be populated with an instance which is probably not the same as the first one.
If the problem is what Ned Murphy speculated, you can easily fix it by setting mouseChildren to false on the buttons.

Computation only works for FIRST record in detail table

Hi,
I am having a weird problem. I have a master/detail form with page computations that work only for the very first record inserted into the detail table. If i try to enter a second or a third record the fields DO NOT get updated with the return values.
This is driving me nuts and i am on a deadline with this project. HELP!!!!!
Here is the code for all the computations below. Interestingly enough, only the name computation works for every new detail record. The others work only for the first.
-- Calulate Social Security PL/SQL Function
DECLARE
p_is16to62ssrate NUMBER(6,2);
p_u16o62ssrate NUMBER(6,2);
p_dob DATE;
p_base_date DATE := SYSDATE;
p_age NUMBER(3);
p_totalss NUMBER(9,2);
BEGIN
SELECT is16to62ssrate, u16o62ssrate
INTO p_is16to62ssrate, p_u16o62ssrate
FROM SSC3_RATES
WHERE ratescheduleid = 1;
SELECT dob
INTO p_dob
FROM SSC3_EMPLOYEES
WHERE ssno = :P25_SSNO;
p_age := TRUNC(MONTHS_BETWEEN(p_base_date,p_dob)/12);
IF (p_age >= 16) OR (p_age <=62) THEN
p_totalss := (:P25_TOTALWAGES * (p_is16to62ssrate/100));
ELSIF (p_age < 16) OR (p_age > 62) THEN
p_totalss := (:P25_TOTALWAGES * (p_u16o62ssrate/100));
ELSE
p_totalss := 0.00;
END IF;
RETURN p_totalss;
END;
-- Calculate Levy PL/SQL Function
DECLARE
-- declare local variables to hold rates from rates table
p_hsdlarate NUMBER(6,2);
p_hsdlbrate NUMBER(6,2);
p_hsdlcrate NUMBER(6,2);
p_hsdldrate NUMBER(6,2);
p_hsdlaminearnings NUMBER(8,2);
p_hsdlamaxearnings NUMBER(8,2);
p_hsdlbminearnings NUMBER(8,2);
p_hsdlbmaxearnings NUMBER(8,2);
p_hsdlcminearnings NUMBER(8,2);
p_hsdlcmaxearnings NUMBER(8,2);
p_hsdldminearnings NUMBER(8,2);
p_hsdldmaxearnings NUMBER(8,2);
p_totalwages NUMBER(8,2);
p_totallevy NUMBER(8,2);
BEGIN
-- Load rate info from table into variables
SELECT hsdlarate, hsdlbrate, hsdlcrate, hsdldrate, hsdlaminearnings,
hsdlamaxearnings, hsdlbminearnings, hsdlbmaxearnings,
hsdlcminearnings, hsdlcmaxearnings, hsdldminearnings,
hsdldmaxearnings
INTO p_hsdlarate, p_hsdlbrate, p_hsdlcrate, p_hsdldrate,
p_hsdlaminearnings, p_hsdlamaxearnings, p_hsdlbminearnings,
p_hsdlbmaxearnings, p_hsdlcminearnings, p_hsdlcmaxearnings,
p_hsdldminearnings, p_hsdldmaxearnings
FROM SSC3_RATES
WHERE ratescheduleid = 1;
-- Assign total wages to variable
p_totalwages := :P25_TOTALWAGES;
-- Determine applicable levy payment and rate
IF (p_totalwages < p_hsdlamaxearnings) THEN
p_totallevy := (p_totalwages * (p_hsdlarate/100));
ELSIF (p_totalwages >= p_hsdlbminearnings) AND (p_totalwages <= p_hsdlbmaxearnings) THEN
p_totallevy := (p_totalwages * (p_hsdlbrate/100));
ELSIF (p_totalwages >= p_hsdlcminearnings) AND (p_totalwages <= p_hsdlcmaxearnings) THEN
p_totallevy := (p_totalwages * (p_hsdlcrate/100));
ELSIF (p_totalwages >= p_hsdldminearnings) THEN
p_totallevy := (p_totalwages * (p_hsdldrate/100));
END IF;
RETURN p_totallevy;
END;
-- Calculate Total Wages PL/SQL Function
DECLARE
t_wages NUMBER(8,2);
BEGIN
t_wages := (:P25_WEEK1_WAGE + :P25_WEEK2_WAGE + :P25_WEEK3_WAGE + :P25_WEEK4_WAGE + :P25_WEEK5_WAGE + :P25_BONUS + :P25_OTHER);
RETURN t_wages;
END;
-- Calculate Employee Name PL/SQL Function
DECLARE
p_firstname VARCHAR2(20);
p_lastname VARCHAR2(20);
p_name VARCHAR2(40);
p_join VARCHAR2(2) := ', ';
BEGIN
SELECT firstname, lastname
INTO p_firstname, p_lastname
FROM SSC3_EMPLOYEES
WHERE ssno = :P25_SSNO;
p_name := Initcap(p_lastname||p_join||p_firstname);
RETURN p_name;
END;
Regards
Glenroy Skelton

Hi,
The first thing that strikes me is the following IF test:
IF (p_age >= 16) OR (p_age <=62) THEN
p_totalss := (:P25_TOTALWAGES * (p_is16to62ssrate/100));
ELSIF (p_age < 16) OR (p_age > 62) THEN
p_totalss := (:P25_TOTALWAGES * (p_u16o62ssrate/100));
ELSE
p_totalss := 0.00;
END IF;The first test will be true for every number as all numbers are greater than 16 or less than 62. I'd suggest changing the OR to an AND or use BETWEEN
Andy

Giving things instance names. Flash cs4

Ive been using adobe flash cs4 for a while now and have had little trouble giving things instance names. Now though, whenever i double click on something like i normally do to give it an instance name, the blue box no longer comes around it, i click on properties, and change the instance name. I now get a dashed line along the lines of the picture. and when i go to properties, it just says shape, and I cant edit the instance name. Just position and size, then the fill and stroke. What is going on?

You do not assign instance names to objects in the library. Instance names are assigned to object on the stage. Instance names are unique for each item on the stage.... meaning the same library object can be used multiple times... each instance of it will have a different name. If you want to assign a name you do it either by manually entering it in the properties panel or thru actionscript code when the object is added to the movie.

How to reference the Instance name using Substitution string or SQL

All:
We have an Application that will be replicated in multiple Apex instances and would like to display the current Oracle Apex Instance name ( Similar to the &APP_USER. on the Welcome portion of the page ) .
Is there a substitution string for this ?
We plan on using a Show/Hide region on the splash page titled [About], that when clicked displays an HTML region with the subsitution strings.
If no substitution strings, can someone help with an SQL that returns the Instance name ?
Thanks for all the help.
Aubrey Fernandes

Aubrey Fernandes wrote:
I currently have 3 URLs to get to my Development, QA and Production servers & will have many more production servers with different Application Ids.
Development = http://canqa101:7777/pls/ngcrmd01/apex
QA = http://canqa101:7777/pls/ngcrmq01/f?p=100:1
Production = http://cancs105:7777/pls/ngcrmp01/f?p=100:1
What I need are the portions before the final forward slash ( canqa101:7777/pls/ngcrmd01 ) which I assumed is the Oracle Apex instance.That information is determined by the web server configuration (e.g. the DADs when using OHS) rather than through APEX itself. There are no built-in substitution strings for this. Create an application item and an On New Instance (new session) computation to set the value using the function<tt>owa_util.get_cgi_env</tt> function to get the CGI environment variables <tt> HTTP_HOST</tt> and <tt>SCRIPT_NAME</tt>. You can then reference the value in the region using substitution string syntax.

"Network-related or instance specific error", Works OK for Administrator

I've been handed a legacy .Net Windows application that was previously used on Windows XP, and asked to debug a few problems encountered on Windows 7 clients. The original developers are all gone. I'm down to only a single
error -- a seemingly common one:
"A network related or instance-specific error occurred while establishing
a connection to SQL Server. The server was not found or was not
accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes
Provider, error: 40 - Could not open a connection to SQL Server)"
Curiously, this error only occurs for ordinary users. When the application is started using "Run as Administrator" it connects to the database immediately. We believe we can configure the app to always start as an administrator,
but obviously we'd like to run it without that if we can. However, I haven't seen any good suggestions why the database connection would only fail this one way.
Any ideas? I've seen at least one troubleshooting guide that suggested trying with Run as Administrator, but it didn't say how to proceed if that fixes it. Am I just supposed to stop at this point? If I was having a UI problem I might understand
that some old apps just aren't going to work in Windows 7, but this is just connecting to the database. Seems like we should be able to do this. I just don't know what to check.
Thanks in advance.
EDIT:
I have looked more closely at this, and perhaps there are more clues. I use the same user account to log on to two Win7 machines. One is a developer workstation with VS10 installed. The other is representative of a client workstation the app will
run on. My user account is actually an administrator on both machines.
At runtime we invoke advapi32.dll logonuser impersonation to logon to SQL server with a dedicated account.
What we're seeing is that I can run the app freely on the developer workstation. Even with UAC on, and even if I am not using "run as administrator". This may point to something about how the SQL drivers/provider are installed
on that machine.
When I run on the regular user workstation, even though I am an administrator myself, I must "run as administrator" to launch it. And when I do, I get a UAC prompt. When we turn UAC off, of course, the app runs fine.

Hi,
I think you are in the similar case with:
http://support.microsoft.com/kb/2009672
By default SSIS always uses the low privileged token resulting in a failure when connecting to a SQL Destination. Full administrator access token is required in your case.
Unlike earlier versions of Windows, when an administrator logs on to a computer running Windows 7 or Windows Vista, the user’s full administrator access token is split into two access tokens:
a full administrator access token and a standard user access token.
During the logon process, authorization and access control components that identify an administrator are removed, resulting in a standard user access token. The standard user access token is then used to start the desktop, the Explorer.exe process. Because
all applications inherit their access control data from the initial launch of the desktop, they all run as a standard user.
After an administrator logs on, the full administrator access token is not invoked until the user attempts to perform an administrative task. When a standard user logs on, only a standard user access token is created. This standard user access token is then
used to start the desktop.
To get around this, you may configure an application to always run elevated.
http://technet.microsoft.com/en-us/library/cc709691%28WS.10%29.aspx
Thanks.
Tracy Cai
TechNet Community Support

Instance names arnt working for Global Locator

Similar Messages

Maybe you are looking for