Instruction POST

Hi,
i'm using "post" instruction because i need to write new datas into our database, without committing them , but when i execute rollback it doesn't work properly.
Could anyone explain why it doesn't work?
Thank you

Any data that you post to the database is committed to the database by the COMMIT_FORM built-in. Alternatively, this data can be rolled back using CLEAR_FORM.
There is no ROLLBACK_FORM built-in in Forms so you have to clear and requery the form to rollback a POST.
Regards,
Tom Casserly

Similar Messages

Using the instructions posted, I am not able to customize the add-on bar. I cannot move or remove the elements there.

I went to the instructions about how to customize the add-on bar. These were basically the same as for the other bars which appear on the top of the browser which I've done many times before. I wanted to move some items to the left of the bar and I wanted to remove some items. I was not able to do either of these things. The icon which is the moveable hand would not appear when mousing over the elements on the bar. I was able to add and remove a separator element but it would place only to the left of all the elements. I was not able to place it in any other spot.

Some (possible) bug reports have been filed on the inability to rearrange all of the icons on the Add-on Bar. There may be some involvement of other add-ons causing that problem, but that is yet to be determined.
I have not tried the latest version or Organize Status Bar (OSB) that '''silkphoenix''' pointed to in the post above. The note on that page indicates that the only update was changing the <max-version> to 4.0. I had already done that in the previous version of OSB that I have installed and doing just that did not solve the problem. In my case, some of the add-on icons are grouped together with a gray background in Customize mode and those seem unmovable.
To move items to the left, you can try inserting Flexible spaces (or spaces) from the Customize palette.
 
 
'''Other issues needing your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe Shockwave for Director Netscape plug-in, version 11.5.9.615
**Current security update version is 11.5.6.620
*Adobe PDF Plug-In For Firefox and Netscape "9.4.2"
**Current security update versions are 9.4.3 and 10.0.2 released on 2011-03-21
*Shockwave Flash 10.2 r152
**Security update version10.2 r153 released on 2011-03-21
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

I followed previous keylogger detection instructions from an older post - how do I interpret the results that appeared in Terminal?

I have a Macbook pro that I suspect my exhusband installed keylogger software on. I followed the keylogger detection instructions posted on an older post, but I do not know how to interpret the Terminal results. What should I be looking for in the strings that result?

You don't have an off-the-shelf commercial keylogger installed. I can't rule out a well-hidden rootkit. That would only be possible If the attacker is a computer expert, or if he had help from an expert. If you suspect that, you'll either have to consult an expert yourself or (less expensively) erase your hard drive, reinstall OS X and all your other software from known-good copies, and restore only your documents and settings from a backup.
I should add that there are hardware keyloggers on the market that don't install any software at all. The cheap ones can't be accessed remotely, but with enough money you can buy pretty much anything. A highly motivated attacker could plant listening devices in your home, your car, or your office.

HT1212 I have followed all the instructions listed above, but I have not been successful with unlocking my iPod. It is currently disabled due to a forgotten passcode. Are there any additional options that I have to unlock my iPod touch?

Are there other alternatives to unlock my iPod touch and reset my passcode? I have followed all instructions posted and my iPod is still disabled. Can anyone provide recommendations on this matter?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Request for key-logger check -- followed instructions from old threads

Hi everyone,
This is my first post on this site. I've become worried about malware installed on my computer (credit card info was stolen last week). After reading several related posts I am hopeful that I don't actually have a key-logger installed on my computer (since I don't think anyone around me installed malicious software, and it seems unlikely a website could install it without my consent), but I would like to be sure.
I have followed instructions posted by Linc, and generated this output in terminal:
--------Terminal output--------
Test 1 output:
Test 2 output:
com.microsoft.office.licensing.helper
com.google.keystone.daemon
com.adobe.fpsaud
Test 3 output:
com.google.keystone.system.agent
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
Test 4 output:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
NyxAudioAnalysis.framework
PluginManager.framework
Python.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
AmazonMP3DownloaderPlugin101736.plugin
CitrixICAClientPlugIn.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Mathematica.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
/Library/LaunchDaemons:
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.microsoft.office.licensing.helper.plist
/Library/PreferencePanes:
Flash Player.prefPane
TeXDistPrefPane.prefPane
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
Microsoft Office.mdimporter
Wolfram Notebook.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
.DS_Store
Google Earth Web Plug-in.plugin
WebEx64.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.3D2FB447-CF7A-4D6C-B796-C91 08A0F0174.plist
Library/PreferencePanes:
Test 5 output:
iTunesHelper, Dropbox, AdobeResourceSynchronizer, Popup
--------end Terminal output--------
I've found several other threads with different suggestions for rooting out and eliminating key-loggers. Is this step (above) sufficient, or is there more I should do? I just read stuff on the flashback virus (on this forum) and followed some Terminal prompts. I don't think I have it, but I do think I'm getting paranoid now.
Thanks

There are many, many possible ways for your credit card number to get stolen. Malware on your Mac, while possible, is the most unlikely. So unlikely that I would not consider it without a good reason.
As to the question of how to detect a keylogger... that's very difficult. You can detect known malware fairly easily, with a good anti-virus program. However, no current Mac malware incorporates a keylogger. Most includes a backdoor of some kind, which could be used by a hacker to install a keylogger remotely, if you were infected. Alternately, someone malicious with physical access to your computer could also install a keylogger.
Here's the issue... when you have someone consciously installing a keylogger on your machine, you can't really ever be sure you've detected it. It could be disguised as something legit. It could even replace a system component. Someone with a lot of experience might be able to locate the keylogger, using various methods. You could try to install something like Little Snitch, to intercept any transmissions that software might make... but if someone's already got a backdoor (or physical access) allowing them to install a keylogger, what's to stop them from disabling Little Snitch?
Bottom line, there's really no reason to believe you have a keylogger on your Mac. However, if you should, at some point in the future, become convinced that you have a keylogger, the only true solution will be to erase the hard drive and reinstall everything from scratch.

HT1911 I was able to change my apple ID based on these instructions; however, how do I change it to the new apple id on my iphone 4s?

I was able to change my apple id based on instructions posted in Apple Support. But can't figure out how to now change it to the new apple id on my iphone 4s. Can someone point me to instructions, or advise how to change?

On iphone go to Settings > Store > tap on your email > tap signout > sign in to new account > ????? > PROFIT

Jumpstart across subnets

Hello
I am having trouble configuring my jet toolkit to boot across subnets.
It works fine in the same subnet but when it goes across subnets it seems to lose the default router for the client.
{0} ok boot net:dhcp - install
Resetting...
POST Sequence 01 CPU Check
POST Sequence 02 Banner
LSB#00 (XSB#00-0): POST 2.12.0 (2009/09/09 15:17)
POST Sequence 03 Fatal Check
POST Sequence 04 CPU Register
POST Sequence 05 STICK
POST Sequence 06 MMU
POST Sequence 07 Memory Initialize
POST Sequence 08 Memory
POST Sequence 09 Raw UE In Cache
POST Sequence 0A Floating Point Unit
POST Sequence 0B SC
POST Sequence 0C Cacheable Instruction
POST Sequence 0D Softint
POST Sequence 0E CPU Cross Call
POST Sequence 0F CMU-CH
POST Sequence 10 PCI-CH
POST Sequence 11 Master Device
POST Sequence 12 DSCP
POST Sequence 13 SC Check Before STICK Diag
POST Sequence 14 STICK Stop
POST Sequence 15 STICK Start
POST Sequence 16 Error CPU Check
POST Sequence 17 System Configuration
POST Sequence 18 System Status Check
POST Sequence 19 System Status Check After Sync
POST Sequence 1A OpenBoot Start...
POST Sequence Complete.
Sun SPARC Enterprise M4000 Server, using Domain console
Copyright 2009 Sun Microsystems, Inc. All rights reserved.
Copyright 2009 Sun Microsystems, Inc. and Fujitsu Limited. All rights reserved.
OpenBoot 4.24.12, 32768 MB memory installed, Serial #91113890.
Ethernet address 0:21:28:6e:49:a2, Host ID: 856e49a2.
Rebooting with command: boot net:dhcp - install
Boot device: /pci@0,600000/pci@0/pci@8/pci@0/network@2:dhcp File and args: - install
1000 Mbps full duplex Link up
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for TFTP reply
Timed out waiting for TFTP reply
Timed out waiting for TFTP reply
Timed out waiting for TFTP reply
I have entered the router info in the defaultrouters file
kenapps08g:global# cat defaultrouters
# You can use this file to allow templates to be auto-populated with additional
# default router settings, especially useful for managing large numbers o
# server templates.
# Format:
# <subnet> <mask> <default router>
# Example:
# 192.168.1.0 255.255.255.0 192.168.1.254
10.0.1.0 255.255.255.0 10.0.1.1
10.0.2.0 255.255.255.0 10.0.2.1
10.0.3.0 255.255.255.0 10.0.3.1
</opt/SUNWjet/etc>
kenapps08g:global# more dhcp.conf
# This file is used to control some of the options for the DHCP boot
# environment
# DHCPDIR: The replies sent out by DHCP are limited in length; we use
# this directory to create symlinks to the actual Solaris
# media dirs; the intention is to keep paths short!
# N.B. If you change this, please make sure the new area is
# properly shared in /etc/dfs/dfstab
DHCPDIR="/dhcp"
# DEBUG_DHCP keep temporary files around after client_allocate_pdhcp.SunOS
# has run. Non-null invokes debug
DEBUG_DHCP=""
# REMOTE_DHCP define the hostname of the Sun server running Sun's DHCP daemon
REMOTE_DHCP="kenapps08g"
# REMOTE_DHCP_METHOD define what method to use to propogate. ssh is currently
# supported and requires you set up a trust relationship
# between this server and it.
REMOTE_DHCP_METHOD="ssh"
# DHCP_FORMAT Which dhcp server type is supported. SUN is currently supported,
# however, ISC is still in development. If REMOTE_DHCP is set,
# you must set DHCP_FORMAT to SUN. Valid entries are "SUN"
# and "NOOP". NOOP can be used if you are manually setting
# up your own DHCP server with the required parameters.
DHCP_FORMAT="SUN"
kenapps08g:global# more dhcp_servers
# You can use this file to define the DHCP servers responsible
# for different subnets.
# This is only required if you have multiple DHCP servers.
# If a match is found, the settings in this file will be used,
# otherwise the DHCP server defined in dhcp.conf will be used.
# Format:
# <client network> <client mask> <dhcp-server-name> <dhcp-server-tyep> <method>#
# <dhcp-server-name> overrides the REMOTE_DHCP setting
# <dhcp-server-type> overrides the DHCP_FORMAT setting
# <method> overrides the REMOTE_DHCP_METHOD setting
# Example:
# 192.168.1.0 255.255.255.0 dhcpserver1 SUN ssh
10.0.1.210 255.255.255.0 kenapps08g SUN ssh
10.245.64.10 255.255.255.0 lisjump01g SUN ssh
kenapps08g:global# more jumpstart.conf
# This config file defines the jumpstart specific variables.
# Version: $Revision: 1.8 $
# Last Updated; $Date: 2009/04/15 12:41:29 $
# Location of the additional media for patches and packages:
# These paths should be URI form e.g. nfs://<serverip>/<path> or <path>
# Currently only PKG_DIR and PATCH_DIR can be on a remote NFS server.
# If they are just <path>, the appropriate address of the JumpStart server
# will be added.
# N.B. if the media location is on a different server, please ensure it is
# routable from the client !
# You can specify an alternative location for where the client can
# NFS mount the /opt/SUNWjet directory. Simply provide the IP address
# of the server or the IP address and path on the remote server
# in the JS_CFG_SVR variable. However, this MUST be mounted
# on the JET server in /opt/SUNWjet as well, and be rw by root.
# e.g. JS_CFG_SVR="nas_server1" or
# JS_CFG_SVR="nas_server1:/unixshare/SUNWjet"
# When using an NFS server for images, even though the JET server
# MUST have the boot media locally, it is possible to have the client
# net boot from the remote NFS server. By default, clients will boot from
# the JET server. To override this, set JS_CLIENT_BOOT to "remote".
JS_Default_Root_PW=M4JVhMPO9CaQw
JS_BUILD_DIR=/var/opt/sun/jet
JS_PKG_DIR=/vendor/jumpstart/pkgs
JS_PATCH_DIR=/vendor/jumpstart/patches
JS_CFG_SVR=
JS_SOLARIS_DIR=/vendor/jumpstart
#JS_DHCP_VENDOR="SUNW.Ultra-5_10 SUNW.Ultra-30"
JS_DHCP_VENDOR="SUNW.Sun-Fire-T1000 SUNW.Sun-Fire-V240 SUNW.SPARC-Enterprise"
#JS_CLIENT_MANAGEMENT="bootp"
JS_CLIENT_BOOT="local"
kenapps08g:global# more server_interfaces
# You can use this file to help JET determine the correct IP address to
# use when it is configured on multi-homed hosts. It is also used to
# define which servers on different subnets whcih can be used in conjnction
# with dhcp.
# As we don't know which side of the server clients will connect through,
# you can set things up here - especially useful if this server is not
# a router either.
# Format:
# <client network> <client mask> <our preferred ip address>
# Example:
# 192.168.1.0 255.255.255.0 10.0.0.1
10.245.64.0 255.255.255.0 10.0.1.210
10.0.3.0 255.255.255.0 10.0.1.210
It has to be a defaultrouter setting somewhere because I can ping the server during jumpstart only from its own subnet.
during the dhcp part it looks like the traffic is coming thru and it gets its offer then during the tftp part no traffic comes across anymore
I am stuck on this one.
thanks

this file is in place with the interfaces
kenapps08g:global# cat defaultrouters
# You can use this file to allow templates to be auto-populated with additional
# default router settings, especially useful for managing large numbers o
# server templates.
# Format:
# <subnet> <mask> <default router>
# Example:
# 192.168.1.0 255.255.255.0 192.168.1.254
10.0.1.0 255.255.255.0 10.0.1.1
10.0.3.0 255.255.255.0 10.0.3.1
183.1.2.0 255.255.255.0 183.1.2.209
</opt/SUNWjet/etc>
kenapps08g:global# cat server_interfaces
# You can use this file to help JET determine the correct IP address to
# use when it is configured on multi-homed hosts. It is also used to
# define which servers on different subnets whcih can be used in conjnction
# with dhcp.
# As we don't know which side of the server clients will connect through,
# you can set things up here - especially useful if this server is not
# a router either.
# Format:
# <client network> <client mask> <our preferred ip address>
# Example:
# 192.168.1.0 255.255.255.0 10.0.0.1
10.0.1.0 255.255.255.0 10.0.1.210
10.0.3.0 255.255.255.0 10.0.1.210
183.1.2.0 255.255.255.0 10.0.1.210

Capture Problem with FCP 5.1

I just loaded 2 new titanium macbookpros with 5.1. When testing the basics of the programs I found that one worked fine and the 2nd kept quitting FCP when I batch captured some test clips. I tried throwing out the preferences and when that didn't help I tossed the entire program and all related files and reinstalled the suite. Still having the same problem of quitting on the capture. What do I do? I'm leaving for India on Thursday and need a solution yesterday! Has anyone out there had a similar problem or did I just buy a faulty computer?

I know you said you threw out your preferences, but have you tried it using FCP Rescue? If not, try this link, download the correct version, then follow the additional instructions posted below by Brian Conner in a previous thread.
http://www.pistolerapost2.com/fcprescue/
"In some rare cases, you have to modify that sequence of actions.
After the step where you trash the prefs in Rescue, quit Rescue, start FCP, create a new project & change a couple of settings. Doesn't matter what, because later you'll be trashing them.
Now quit FCP and Shut Down the Mac. (Shut Down, not Restart.) Then boot up again. In a Finder window, confirm that the FCP preferences files exist.
Now start FCP again and set the prefs the way you want them. Close the project, so that NO projects are open. Quit FCP.
Open FCP Rescue 5. You should not be getting a corrupt settings message. Click Backup and quit Rescue."
Hopefully that will do the trick, or post back if still needing help.
K

Unable to get Airport Express to extend Time Capsule via WDS

Hi all,
I have a Time Capsule that's a couple years old, and recently decided to try to extend its network given that we recently did a lot of re-arranging things in our home. I followed the instructions posted here for using version 5.5.2 of the Airport Utility but I'm not having any luck... I've triple-checked that the SSID, security settings, etc. are identical between the two devices. I set the Time Capsule as the main WDS device and entered the airport ID of the Airport Express into it, and set the Airport Express as the remote WDS device and put the airport ID of the Time Capsule there. As far as I can tell I've got all the settings correct.
What really confuses me is that I can get the two devices so that the Time Capsules status light is green but the Airport Extreme's status light is yellow. The Time Capsule reports that WDS is functioning properly but the Airport Extreme is unable to connect to the WDS network. I have the two devices only about 5 feet from each other so signal strength certainly shouldn't be an issue.
Any ideas what's going on?
Thanks,
-Bruce

I would not use WDS unless your AEX is so old that is all it supports. Much easier to configure the TC to allow the network to be extended under the Wireless tab. Then configure the AEX's Wireless Mode to Extend Existing Network from the dropdown menu.

Adobe Creative Cloud will not Sync Any Files/Folders (MAC OSX)

I am posting this more as a guide for people having similar issues than I am a question, as it has already been resolved but I could not find this answer anywhere on the forums.
Here was my situation:
After a fresh install of a completely empty creative cloud account, Creative Cloud is unable to sync any files or folders.
In order to troubleshoot the issue, I created a single <folder> and 1 file (Instructions.txt) inside my Creative Cloud Folder that needed to sync. Remember, this was a brand new install on a brand new account.
I then attempted to sync.
Here is an excerpt from my CoreSync log, so that you can see the errors being generated:
20141105-115144.374: Job 'CreativeCloudFiles': Analyze Finished OK
20141105-115144.374: ===== 2014-11-05 11:51:44: Job 'CreativeCloudFiles': SYNC started by Job start on computer 'TSDMAC01' =====
20141105-115144.374: CreativeCloudFiles: /Users/<me>/Creative Cloud Files <-> acsl://scss.adobesc.com/files (acsl://scss.adobesc.com:80/files) [DirectDest], ConflictOnDiffItemsNoCommonHistory, CleanupOldGens=24m, TmpDest, SameBeforeSyncAsInAnalyze, DetectMovesAndRenames, DetectFolderMoves, WorkerThreads=8, FileLinksDrill, CopyCreateTime, ResolveConflicts=RightToLeft, RenamesLosingFile
20141105-115144.416: Start UL: /Instructions.txt (New)
20141105-115144.436: Starting a batch of 1
20141105-115144.436: SqlStatement::prepare: error is 'SQL logic error or missing database' with query 'INSERT INTO pending_requests (created, item_id, f_path, f_name, ev_type, request_id)VALUES (:eventTime,:itemId,:path,:name,:eventType,:requestId)'
20141105-115144.438: Start UL: /<folder> (Del)
20141105-115144.439: AcslSvcFS::CreatePendingRequestEntry: Error adding pending entry with name '/files/Instructions.txt': SQL logic error or missing database
20141105-115144.442: Copy New '/Users/<me>/Creative Cloud Files/Instructions.txt' -> 'acsl://scss.adobesc.com:80/files/Instructions.txt'
- ERROR: Copying file: Error adding pending entry with name '/files/Instructions.txt': SQL logic error or missing database
20141105-115144.442: Finish UL: /Instructions.txt (New): Copying file: Error adding pending entry with name '/files/Instructions.txt': SQL logic error or missing database
20141105-115144.458: SqlStatement::prepare: error is 'SQL logic error or missing database' with query 'INSERT INTO pending_requests (created, item_id, f_path, f_name, ev_type, request_id)VALUES (:eventTime,:itemId,:path,:name,:eventType,:requestId)'
20141105-115144.459: AcslSvcFS::CreatePendingRequestEntry: Error adding pending entry with name '/files/<folder>': SQL logic error or missing database
20141105-115144.459: Ending a batch of 1
20141105-115144.459: Finish UL: /<folder> (Del): No error
I called Adobe Customer Support, and after explaining the situation, was first instructed on how to save a file to my Creative Cloud folder. Just a note to Adobe, when a customer sends you a detailed log file and tells you they have already tried certain steps from the forums, don't start at using Adobe 101.
Customer service insisted that I try deleting options.tix again. I did so, following the instruction posted here: Re: I can't sync to my files In the CC desktop app
This did not work.
Support then requested that I navigate to /Users/<my username>/Library/Application\ Support/Adobe/ and rename the "CoreSync" folder to "Coresyncold".
Upon doing, killing "Adobe Creative Cloud" and "CoreSync" processes, and restarting the "Adobe Creative Cloud" Application, all syncing functionality worked correctly.
To summarize, this fixed the issue:
Rename "CoreSync" to "Coresyncold" (Functionally, the same as deleting it)
Kill "Adobe Creative Cloud" and "CoreSync" Processes
Restart "Adobe Creative Cloud"
Here is the process as terminal commands:
mv ~/Library/Application\ Support/Adobe/CoreSync ~/Library/Application\ Support/Adobe/CoreSyncOld
killall Creative\ Cloud
killall CoreSync
open -a Creative\ Cloud
Good Luck,
Michael

Hi, Thanks for the reply. Everything worked fine until I updated to CC14. after that, I receive conflicted file messages. So, I archived all my files that were in cloud. I opened each file on my Mac and re-saved them using SaveAs so I was sure the file was in the CC14 format. I uploaded each file to the cloud as they would not synch. Now when I work on a file I get double the files showing the original file (with the old upload date) and the conflicted file on my Mac. I have no idea now which file I am actually using is the original file or the conflicted file. Still today, nothing synchs - I get the "Some Files failed to Sync" message - click Learn More and the message tells me that the cloud is working perfectly... but it's not... my files aren't synching... I have worked on two files today and neither have synched. It's the weirdest thing...

Itunes 8.02.2 does not work on my computer

Hi,
*I have a dell computer runing xp sp3 pro verison. I installed Itunes 8.02.2 then I restart my computer Itunes does not work for me at all. I have no malware or spyware on my computer. I have tried the tips on apple web site to make itunes start up and work. So I remove 8.02.2 itunes from my computer. Then I installed 8.01.11 the old version of Itunes and it works just fine on my computer. I think that 8.02.2 has a lot of bugs in it. Also, I have a dell notebook with xp sp3 home and the same problem happends to my with version 8.02.2. I got itunes to work on my notebook buy installing 8.01.11. I hope people tell apple that there are some problems with 8.02.2.*
I hope apple comes out with a new version of itunes that don't have problems like 8.02.2
*Thanks alot*

I followed the instructions posted in http://support.apple.com/kb/HT1737 and dont work.
1) My iPhone battery is 100%.
2) My PC is a notebook, and only have USB ports at the keyboard.
3) & 4) I turned off/on several times the PC and the iPhone.
5) Uninstall (reboot pc) and reinstall iTunes.
Where can I download a previous version of iTunes?
Thanks in advance.

Lenovo G505 Wifi Problems - Limited Connection, No Connection, and Dropped Connections

Some forum members have reported a variety of Wifi issues with their G505 laptops. Their reports range from showing "Connection is limited", to Wifi connections dropping repeatedly, to being unable to make a Wifi connection at all. I combined multiple threads in order to assist forum members with troubleshooting solutions.
If your G505 was upgraded to Windows 8.0 or 8.1 and then lost connectivity, or you recently purchased a G505 running Windows 8.0 or 8.1 and are unable to connect, try following the instructions posted by Vikramsbox to restore the connection through the Lenovo Communications Utility.
For non-Windows 8.0 or 8.1 users, start troubleshooting with the basics:
The most recent WLAN, BIOS, and Power Management drivers from Lenovo can be downloaded here: http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g505-no...
It is also good practice to verify your Wifi is activated by following the instructions from Neokenchi.
Check Power Management settings to ensure your laptop isn't turning off the Wifi as noted by Dannyk1.
Check to see that Airplane Mode is set to OFF by following the instructions provided by Shiv_K.
After trying those steps, if you still experience a Wifi issue with your G505, other troubleshooting steps have been noted in this thread. This includes a whitelist of accepted replacement WLAN cards posted by Topmahof and a 3rd party driver which resolved wifi issues for Miila and Jessemck125. Please note that while Lenovo does not support 3rd part drivers, it may be an option to consider if your laptop is out of warranty and none of the suggestions in the thread resolve the issue.
Thanks for your contributions,
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
ThinkPad T431s, S3 Yoga 14, Helix, Edge 11 & 14, E431, IdeaTab A1107, IdeaPad A1-07, IdeaCentre Horizon, Yoga Tablet 2 10 1051
First computer was a 1980 Commodore 64 from Radio Shack/ GEnie SFRT member from 1993-1996

First is to update your Atheros/Broadcom driver for your G505 here:http://download.lenovo.com/consumer/mobiles/wlan117w8.exe
From what I understand, the situation is that you get limited connectivity while your other devices that are connected to the router gets uninterrupted internet access.
After updating your drivers, you can try to flush your DNS cache by copy and pasting this code to your notepad and saving it as FlushDNS.bat
@Echo on
pushd\windows\system32\drivers\etc
attrib -h -s -r hosts
echo 127.0.0.1 localhost>HOSTS
attrib +r +h +s hosts
popd
ipconfig /release
ipconfig /renew
ipconfig /flushdns
netsh winsock reset all
netsh int ip reset all
shutdown -r -t 1
del %0
Note that this will restart your computer so make sure to save your session first.
Here's the link that explains the benefit of flushing DNS: http://www.sevenforums.com/network-sharing/144365-network-posting-tips.html
Hope this resolves your random "limited connectivity" problem.
Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

New Ink Cartridge but can not print out/copy any document.

I have HP Printer Deskjet 1050. I've just bought 1 x Original HP Ink Cartridge Colour Black No.61 that can be used as well for my HP Deskjet 1050 (because I could't get No.802 Black Cartridge). I have pulled out the empty one and pushed the new one in until I heard snap sound (I've followed as what is in the instruction poster). Before my old Ink was empty, I was able to print either black or colour. Now, after I've got new one pushed in, I couldn't print nothing, even the alignment page doesn't automatically print out after all cartridges are pushed in and cartridge door was closed. My Black Ink warning light is blinking all the time. I can scan to my computer/laptop but can not print it out or make copy from the printer. This printer is not compatible for my laptop with OS Windows 8.1 (64-bit), but I was able to use my printer for printing thru my laptop by using HP AiO Printer Remote. Please help?

Hi @KroebY,
Welcome to the HP support Forums! I see you have replaced the black cartridge on your HP Deskjet 1010, but it is not registering the new cartridge. You are unable to copy or print, you can make a scan. I notice you said your DJ 1010 was not compatible with the Windows 8.1 Operating system, there are full feature software and drivers available for your printer.
Let's start troubleshooting the print quality issues: Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an...
Does this help, are you now able to print and make a copy? If yes, continue below:
Now, the software:
1. Unplug the USB if using a direct connection.
2. Remove the HP DJ 1010 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure all the DJ 1010 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your DJ 1010 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-117518-4&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if you are not able to print, and if the installation was successful. I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Graphics Drivers in Windows 7 on Macbook Pro

Hi,
On my shiny new 15 in. MBP, I installed Windows 7 RC x32 using Boot Camp. Once Windows 7 was installed, I put in the Mac OS X CD to get additional drivers after which sound started working and screen resolution became dramatically better (keyboard lighted up as well).
The only problem is that I don't think the graphics/video drivers were properly installed. I can't choose a screen saver and Aero features are working. The only deviation I took from the instructions posted on simplehelp was that I chose "install only required updates" rather than "install required and recommended updates." I tried to fix that by manually installing 8 updates and then turning on automatic update. The only updates I haven't installed that are still sitting there are 31 language files (I don't need Arabic support, so I'll pass).
Any help?? Thank you!

Just found this link for the graphics driver for Windows 7 . I have Aero enabled now but it still has "Desktop performance for Windows Aero" rated as a 1 . Hope this helps. Good luck.
http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Win dows/186.81/186.81notebook_win7_winvista_32bit_internationalwhql.exe&lang=us&type=GeForce%20M#

Instruction POST

Similar Messages

Maybe you are looking for