Integraion Server already defined.

Hi,
I am not sure how business system of Integration Server was missed from list of business systems of business Landscape screen. So to get back it I tried to create. It displaying like "Integraion Server already defined".
below are given inputs.
technical system - WEB AS ABAP
system           - XIS on hwsapxi
client              100 of XIS
Business system role Integration server
Pipeline URL     http://xis:8000/sap/xi/engine?type=entry
after pressing 'FINISH' button displaying like
'Integraion Server already defined' There is already an integration server defined for the selected technical system. Please select role Application System.
please help out me from this problem....

It could be that you have an inconsistency in the SLD.
See note 764176.
When I had the same I deleted everything according to the note, let the XI system register automatically again and everything was ok afterwards.
I could create the Business System for XI integration server.
The note says you should create some associations (point 6) but if I remember correctly it was not needed for me (I am on XI 3.0 patch stack 13).

Similar Messages

Integration Server already defined ?

After delete the business system for XI 3.0 system on SLD,
I wan't to create a new one Business system base on XI 3.0 TS,but The SLD hint :
--Integration Server already defined, There is already an integration server defined for the selected technical system. Please select role Application System.

hi,jon:
althouth you want to create business system base on xi as integration server.
actually,you can not do that.
you enter business system ---> new business system.
you have a look:
only five item for TS:
     Web AS ABAP
     Web AS Java
     Standalone
     Third-Party
     Business Partner (only for XI 2.0)
There are not xi.
actually,you can not create business system for you xi.even though you have delete it.
you got me?

Mozilla, Firefox claims Factory is already defined

I'm working on a client server Java applet that uses SSL over RMI. In IE there aren't any problems, however when I try to load the same applet in Mozilla/Firefox, I get an error message saying "Factory already defined".
The problem seems to occur when I call setSocketFactory() on the client with my custom secure RMISocketFactory. The call is shown below:
java.rmi.server.RMISocketFactory.setSocketFactory(new SecureRMISocketFactory());
Inside the SecureRMISocketFactory constructor there is a call to SSLSocketFactory.getDefault() which seems to get the default SSLSocketFactory and set it as the current socket factory. Then when the setSocketFactory call tries to set the Factory, an exception occurs stating that the factory already defined.
Has anyone encoutered something similar or does anyone have any suggestions? I also understand that 1.5 has a built in SSLRMISocketFactory, however I'm assuming it also places a call to getDefault() and will not help my situation.
thanks in advance,
captnveg

See:
* http://kb.mozillazine.org/Profile_in_use
* http://kb.mozillazine.org/Recovering_a_missing_profile

Principal admin already defined in realm weblogic

My weblogic server got abruptly terminated for some unknown reason after which
it fails to start with the exception...
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: java.lang.SecurityException: Principal
admin already defined in realm weblogic
java.lang.IllegalAccessError: java.lang.SecurityException: Principal admin
already defined in realm weblogic
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm
(SecurityService.java:254)
at weblogic.security.SecurityService.initialize
(SecurityService.java:118)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:418)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:212)
at weblogic.Server.main(Server.java:35)
'>
How can we get any backup of filerealm.properties if it gets corrupted?

static Context getInitialContext(String url, String user, String password){>
Properties h = new Properties();
h.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
h.put(Context.PROVIDER_URL, url);
h.put(Context.SECURITY_PRINCIPAL, user);
return new InitialContext(h);
Funnily, password is not used....after realising that I added line
h.put(Context.SECURITY_CREDENTIALS, password);
and the code works. Is it possible that this was the problem (anddocumentation
has been incorrect for years now) or was there something that I missed?ya, that was the problem if you refering to:
http://e-docs.bea.com/wls/docs70/ejb/EJB_design.html#1035574
we will get that corrected.
cheers,
mihir

Item already defined at a high level in the product tree

Hi experts,
when I add a BOM into the system, says A is consisted of B and C, I click the button to add this BOM, but system tell me an error "Item already defined at a high level in the product tree. Row no. 2".
Row no 2 is item C, I check all my BOM, C is not contained in any BOM, and B is in another BOM but that BOM didn't contain C or A.
A is in a BOM, but in that BOM, there is no C. It's wreid why C already defined at a high level in the product tree. Thanks...

Hi
Please wite following the querry and check
SELECT T0.[Code], T1.[Code] FROM OITT T0 INNER JOIN ITT1 T1 ON T0.Code = T1.Father WHERE T0.[Code] =[%0]
Ashish Gupte

Integration server already has a business system

Dear All,
I got problem while creating sender business system for FILE-IDOC Scenario.I have created r3_800 business system for IDOC receiver with logical system name APOCLNT800.After that I tried to create business system for FILE Sender with logical system name XI7CLNT001.But i am getting the error "The selected integration server already has a business system with logical name XI7CLNT001. Select a different integration server or change the logical name."
Do I need to create another logical system?
Any help would be appreciated.Thanks in advance.
Regards
Vinay

In addition to my previous post, refer the following blogs. This will help you understand how ABAP based systems in the landscape already get registered in SLD while post installation. Just check once the BS you are trying to create in SLD is already there.
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
/people/praveen.kurni3/blog/2010/10/15/creating-a-technical-system-of-type-was-abap-in-sld133-are-we-sure-about-the-objects-that-get-created

Email server name defination

please see metalink Note:427962.1
Testing email option for demo page "runrepIAS.html"
I need to change the email server used to report. Where is this email server name defined?
This process does not get the email server name from the config files in $ORACLE_HOME/reports/conf
Thanks

I just ran the demo (following the metalink note) and I am using the:
<pluginParam name="mailServer">%MAILSERVER_NAME%</pluginParam>in the rep_myserver.conf file in $ORACLE_HOME/reports/conf
and the value MAILSERVER_NAME is defined as:
MAILSERVER_NAME=myemailserver.comin the rwsevlet.properties file.
I also changed it to a different smtp server and that worked also, just to make sure it was using the value defined in my config files. Why do you think it is not using that value?

REP-56040: Server already exists in the network

Hi,
I use report server on a solaris 8.
When I stop/start it I get the error message:
REP-56040: Server already exists in the network
even when I properly shutdown it. I tried stopping the application server, killing all the process, the only solution I found was to reboot the server.
Do you know if their is a kind of lock file to erase?
Thanks,
Pierre-Yves
[email protected]

Hi FormsEleven
Thanks for your reply
When run the following found only one server
C:\DevSuiteHome_1\BIN>rwdiag.bat -findall
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
(1) Name = repserver : Type = server : Host = Shabar-PC
C:\DevSuiteHome_1\BIN>After done the said change I get the following error when starting the report server with the following command
rwserver server=repserver startError
REP-56114: Bind to naming server failed
:org.omg.CORBA.COM_FAILURE: vmcid: SUN minor code: 201
completed: No Cheers
Shabar
Edited by: shabar on Apr 9, 2010 5:23 AM

Problem fixing XJC Errors ("already defined" in groups)

Hello,
I am using JAXB to generate code for some schemas created by a different group in my project, but I get an error that I kind of understand but don't know exactly how to resolve.
This is a pared-down version of the schema holding only the offending pieces:
MainSchema.xsd
<?xml version="1.0" encoding="utf-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
           xmlns:ns_a="DATASET_A"
           xmlns:ns_b="DATASET_B"
           xmlns:ns_c="DATASET_C"
           xmlns:ns_d="DATASET_D"
           xmlns:ns_e="DATASET_E"
           xmlns:ns_f="DATASET_F">
   <xs:include schemaLocation="BASIC_TYPES.XSD" />
   
   <xs:import namespace="DATASET_A" schemaLocation="DATASET_A.xsd"/>
   <xs:import namespace="DATASET_B" schemaLocation="DATASET_B.xsd"/>
   <xs:import namespace="DATASET_C" schemaLocation="DATASET_C.xsd"/>
   <xs:import namespace="DATASET_D" schemaLocation="DATASET_D.xsd"/>
   <xs:import namespace="DATASET_E" schemaLocation="DATASET_E.xsd"/>
   <xs:import namespace="DATASET_F" schemaLocation="DATASET_F.xsd"/>
   <xs:complexType name="ReturnGetDataStatusType">
      <xs:sequence>
         <xs:element name="DATA_LIST">
            <xs:complexType>
               <xs:sequence maxOccurs="unbounded">
                  <xs:choice>
                     <xs:group ref="ns_a:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                     <xs:group ref="ns_b:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                     <xs:group ref="ns_c:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                     <xs:group ref="ns_d:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                     <xs:group ref="ns_e:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                     <xs:group ref="ns_f:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                  </xs:choice>
               </xs:sequence>
            </xs:complexType>
         </xs:element>
      </xs:sequence>
   </xs:complexType>
   
   <xs:complexType name="FileDataType">
      <xs:sequence>
         <xs:element name="DATA_LIST">
            <xs:complexType>
               <xs:choice>
                  <xs:group ref="ns_a:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                  <xs:group ref="ns_b:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                  <xs:group ref="ns_c:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                  <xs:group ref="ns_d:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                  <xs:group ref="ns_e:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
                  <xs:group ref="ns_f:ReturnGetDataItemType" minOccurs="0" maxOccurs="unbounded"/>
               </xs:choice>
            </xs:complexType>
         </xs:element>
      </xs:sequence>
   </xs:complexType>
   <xs:element name="RETURN_GET_DATA" type="ReturnGetDataStatusType"/>
   <xs:element name="FILE_DATA" type="FileDataType"/>
</xs:schema>---
When I try to compile this schema and their underlying schemas, I get this error repeated for each "group" attribute of the FileDataType:
C:\dir\temp\fake_DataStore>xjc -d output   -p com.company.stuff   *.xsd *.XSD | more
parsing a schema...
[ERROR] Property "ReturnGetDataItemType" is already defined. Use <jaxb:property> to resolve this conflict.
line 49 of file:/C:/dir/temp/fake_DataStore/MainSchema.xsd
[ERROR] The following location is relevant to the above error
line 50 of file:/C:/dir/temp/fake_DataStore/MainSchema.xsd
[ERROR] Property "ReturnGetDataItemType" is already defined. Use <jaxb:property> to resolve this conflict.
line 50 of file:/C:/dir/temp/fake_DataStore/MainSchema.xsd
[ERROR] The following location is relevant to the above error
line 51 of file:/C:/dir/temp/fake_DataStore/MainSchema.xsd
[ERROR] Property "ReturnGetDataItemType" is already defined. Use <jaxb:property> to resolve this conflict.
line 51 of file:/C:/dir/temp/fake_DataStore/MainSchema.xsd
[ERROR] The following location is relevant to the above error
line 52 of file:/C:/dir/temp/fake_DataStore/MainSchema.xsd
[ERROR] Property "ReturnGetDataItemType" is already defined. Use <jaxb:property> to resolve this conflict.
line 52 of file:/C:/dir/temp/fake_DataStore/MainSchema.xsd
[ERROR] The following location is relevant to the above error
line 53 of file:/C:/dir/temp/fake_DataStore/MainSchema.xsd
[ERROR] Property "ReturnGetDataItemType" is already defined. Use <jaxb:property> to resolve this conflict.
line 53 of file:/C:/dir/temp/fake_DataStore/MainSchema.xsd
[ERROR] The following location is relevant to the above error
line 54 of file:/C:/dir/temp/fake_DataStore/MainSchema.xsd
Failed to parse a schema.---
It clearly has a problem with using the same group references in two different complexTypes, but I don't know how to use jaxb:property to resolve it.
Do I rename this ReturnGetDataItemType differently in the FileDataType complexType? If so, how?
Thank you for reading. Please let me know if you have any questions.
Edited by: jaylogan on Mar 18, 2010 6:49 PM

you need to pass a bindings file using the -b switch as explained here: http://java.sun.com/webservices/docs/1.5/tutorial/doc/JAXBUsing4.html

How to view defination of already defined packages ?

Hi,
how can i view defination of a already defined package? Its spec and its body?

Hi,
user12222356 wrote:
My package name is 'PackageTest1' , since at the time of creation i had given that name.
But while writing this query
select text from user_source where name='PacklageTest1'no row is selected, and when i give this command
select text from user_source where name='PACKAGETEST1'defination is shown .But why only capital letter package name is identified ?One reason is that the names are different; there's an 'l' (5th character) in 'PacklageTest1', but not in 'PACKAGETEST1'.
A more subtle reason is that identifiers in Oracle are case-sensitive. You can have one package called
"PackageTest1", another called
"Packagetest1" (with a small 't'), another called
"PACKAGETEST1" (all capitals), another called
"pAckAgEtEst1" (vowels capitalized),
all in the same schema.
Normally, the parser capitalizes all unquoted text, so if you say
EXEC packagetest1.foo ('Hello, world!');what actually gets compiled is
EXEC PACKAGETEST1.FOO ('Hello, world!');If you actually have an identifier with lower-case letters, then you have to use quotes around it; double-quotes, in places where you don't want it mistaken for a string literal:
EXEC "PackageTest1"."Foo" ('Hello, world!');or single-quotes when it really is a string literal:
select       text                     -- Column name is actually TEXT, but lower-case will work here
from      user_source                -- View name is actually USER_SOURCE, but lower-case will work here
where     name     = 'PackageTest1'     -- String literal is already quoted
and       type     = 'PACKAGE BODY'     -- If you don't want source code from package spec mixed in
order by line                    -- Only way to make sure output is in order
;

Runtime error (already defined class)

I get a runtime error which says:
Class com.pictoflex.app.RecordPanel already defined in RecordPanel. It could be that your source file is not in the correct package..
The package defined for that class is com.pictoflex.app, the source file is placed in the right directory, and there is only one class definition (public abstract class ... extends JPanel). What is wrong (probably something very stupid I didn't see)?

Maybe you first compiled a RecordPanel class without package name, and now there exist two class files with the same name in different packages.

Get message "Error creating account: Incoming server already exists."

trying to set up new IMAP account and get message "Error creating account: Incoming server already exists." Changed settings manually, but same error message.

''ScottNH [[#question-1040338|said]]''
<blockquote>
trying to set up new IMAP account and get message "Error creating account: Incoming server already exists." Changed settings manually, but same error message.
</blockquote>
I have been getting this too (for the last two days - on at least a dozen tries).
I am Running Win7 and already have three POP accounts.
All definitely have the incoming server pop.googlemail.com
I wanted to add a new IMAP account, so in T'Bird
Tools.... Account Settings
Account Actions ..... Add Mail Account
Filled in
my name,
the email address ([email protected] - and in gmail this mail account
was created as IMAP),
password (with a tick to remember this)
... continue
and it then detected the mail setup as IMAP,
Incoming : IMAP, imap.googlemail.com , SSL
Outgoing : SMTP, smtp.googlemail.com , SSL
Username: [email protected]
but when I then clicked on Done
it said Error Creating Account - Incoming server already exists.
And if I then clicked on OK followed by Manual Config, it then showed
in the Mail Account Setup
Incoming: IMAP imap.googlemail.com 993 SSL/TLS Normal Password
and again if I then clicked Done it gave the same error message as before.
(and I have screenshots to support all of this).
But I do not know if someone has been working on a fix to T'Bird or googlemail, because just now when I did it yet again in order to make a final check that what I have been writing here is correct , this time I did NOT get the error message and the new account has been setup!!!!!
So do others find this has now been cleared too?

Material type WERT already defined as VO material, others not allowed

Hi all,
I am currently trying to create a new movement type (Valuated , Non-Stock Materials). However, I was hit with the following error:-
Material type WERT already defined as VO material, others not allowed
Message no. CZ273
Understood that WERT is also Valuated , but non-stock material. However, I need to copy to a new movement type with some changes to the material type on other area.
May I know anyone can help to share the experience in solving this issue? Thanks!
Regards,
Michelle Low

SAP has hard programmed stops in their programs (e.g. MM03CI10), a material type for value material must only exists once in table T134
If you want to create a new one, then you have to delete the SAP given WERT material type.

Module STATUS_0111 already define as a output module

Hi,
I have an error in my PBO customer screen :
Progr. : SAPLXM06 Include: ZXM06O01 Ligne: 9
Message d'erreur du contrôle syntaxique :
Module STATUS_0111 is already defined as a OUTPUT module.
Code message interne : MODULE 001
(le message ne peut être masqué par un commentaire fictif : "#EC .., ou par SET
EXTENDED CHECK OFF/ON)
Any idea of the cause of this error please?
Thanks for your reply.

Hi,
I have the same problem in a PBO for a customer screen.
Does anybody know what's the problem, please.
Best Regards,
Vibeke

Already defined scrollPane for JList..but duzen appear...plzz elp..real thx

I already defined JScrollPane for my JList...but it juz duzen wanna appear...i cant see anything wrong wid the code...plzz elp me solve this....i'd be really grateful...thanks alot ppl...da code is below:
import java.awt.*;
import javax.swing.*;
class DrawGUI extends JFrame {
     String [] names = {"Jasima Bte Syed Syed Sulaiman",
                              "Yang Shulei",
                              "Nur Farina",
                              "Lee Chee Chong",
                              "Wang Ding Yu",
                              "Sanjeev Singh",
                              "Testing please",
                              "wrk"};
     JList contactList = new JList(names);
     JScrollPane scrollPane = new JScrollPane(contactList);
     JButton btnAddContact = new JButton("Add Contact");
     JButton btnDeleteContact = new JButton("Delete Contact");
     JButton btnEditContact = new JButton("Edit Contact");
     JButton btnSearchContact = new JButton("Search");
     JLabel lblCurrentList = new JLabel("Current List of Contacts",JLabel.CENTER);
     JLabel lblSearch = new JLabel("Type in the Name of the Contact",JLabel.LEFT);
     JLabel lblProfile = new JLabel("Profile of Contact",JLabel.LEFT);
     JLabel lblPhoto = new JLabel(new ImageIcon("jasima.jpg"));
     JLabel lblName = new JLabel("Name: Jasima Bte Syed Sulaiman",JLabel.LEFT);
     JLabel lblNickname = new JLabel("Nickname: DJk|ddGA|",JLabel.LEFT);
     JLabel lblEmail = new JLabel("E-Mail Address: [email protected]",JLabel.LEFT);
     JLabel lblAddress = new JLabel("Address: Blk 123 Kuching Street #11-222",JLabel.LEFT);
     JLabel lblPostalCode = new JLabel("Postal Code: Singapore 650346");
     JLabel lblContactNoHome = new JLabel("Contact No(Home): 652123",JLabel.LEFT);
     JLabel lblContactNoMobile = new JLabel("Contact No(Mobile): 90029856",JLabel.LEFT);
     JTextField txtSearch = new JTextField();
     AddContactButtonListener addContactButtonListener = new AddContactButtonListener();
     EditContactButtonListener editContactButtonListener = new EditContactButtonListener();
     SearchContactButtonListener findContactButtonListener = new SearchContactButtonListener();
     public DrawGUI() {
          Container c = getContentPane();
          c.setLayout(null);
          c.add(contactList);
          c.add(scrollPane);
          c.add(btnAddContact);
          c.add(btnDeleteContact);
          c.add(btnEditContact);
          c.add(btnSearchContact);
          c.add(lblCurrentList);
          c.add(lblSearch);
          c.add(lblProfile);
          c.add(lblPhoto);
          c.add(lblName);
          c.add(lblNickname);
          c.add(lblEmail);
          c.add(lblAddress);
          c.add(lblPostalCode);
          c.add(lblContactNoHome);
          c.add(lblContactNoMobile);
          c.add(txtSearch);
          btnAddContact.addActionListener(addContactButtonListener);
          btnEditContact.addActionListener(editContactButtonListener);
          btnSearchContact.addActionListener(findContactButtonListener);
          contactList.setBounds(200,100,270,110);
          btnAddContact.setBounds(10,100,150,40);
          btnDeleteContact.setBounds(10,150,150,40);
          btnEditContact.setBounds(10,200,150,40);
          btnSearchContact.setBounds(380,335,90,30);
          lblCurrentList.setBounds(200,55,140,40);
          lblSearch.setBounds(200,250,200,40);
          lblProfile.setBounds(510,55,200,40);
          lblPhoto.setBounds(510,100,100,98);
          lblName.setBounds(510,250,300,20);
          lblNickname.setBounds(510,270,300,20);
          lblEmail.setBounds(510,290,300,20);
          lblAddress.setBounds(510,310,300,20);
          lblPostalCode.setBounds(510,330,300,20);
          lblContactNoHome.setBounds(510,350,300,20);
          lblContactNoMobile.setBounds(510,370,300,20);
          txtSearch.setBounds(200,295,270,30);
          setSize(800,500);
          setTitle("Contact Book");
          setVisible(true);
          setResizable(false);


you should only be adding the scrollPane to the container not the list itself.

Integraion Server already defined.

Similar Messages

Maybe you are looking for