Integration Server already defined ?

After delete the business system for XI 3.0 system on SLD,
I wan't to create a new one Business system base on XI 3.0 TS,but The SLD hint :
--Integration Server already defined, There is already an integration server defined for the selected technical system. Please select role Application System.

hi,jon:
althouth you want to create business system base on xi as integration server.
actually,you can not do that.
you enter business system ---> new business system.
you have a look:
only five item for TS:
     Web AS ABAP
     Web AS Java
     Standalone
     Third-Party
     Business Partner (only for XI 2.0)
There are not xi.
actually,you can not create business system for you xi.even though you have delete it.
you got me?

Similar Messages

Integraion Server already defined.

Hi,
I am not sure how business system of Integration Server was missed from list of business systems of business Landscape screen. So to get back it I tried to create. It displaying like "Integraion Server already defined".
below are given inputs.
technical system - WEB AS ABAP
system           - XIS on hwsapxi
client              100 of XIS
Business system role Integration server
Pipeline URL     http://xis:8000/sap/xi/engine?type=entry
after pressing 'FINISH' button displaying like
'Integraion Server already defined' There is already an integration server defined for the selected technical system. Please select role Application System.
please help out me from this problem....

It could be that you have an inconsistency in the SLD.
See note 764176.
When I had the same I deleted everything according to the note, let the XI system register automatically again and everything was ok afterwards.
I could create the Business System for XI integration server.
The note says you should create some associations (point 6) but if I remember correctly it was not needed for me (I am on XI 3.0 patch stack 13).

Integration server already has a business system

Dear All,
I got problem while creating sender business system for FILE-IDOC Scenario.I have created r3_800 business system for IDOC receiver with logical system name APOCLNT800.After that I tried to create business system for FILE Sender with logical system name XI7CLNT001.But i am getting the error "The selected integration server already has a business system with logical name XI7CLNT001. Select a different integration server or change the logical name."
Do I need to create another logical system?
Any help would be appreciated.Thanks in advance.
Regards
Vinay

In addition to my previous post, refer the following blogs. This will help you understand how ABAP based systems in the landscape already get registered in SLD while post installation. Just check once the BS you are trying to create in SLD is already there.
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
/people/praveen.kurni3/blog/2010/10/15/creating-a-technical-system-of-type-was-abap-in-sld133-are-we-sure-about-the-objects-that-get-created

SLD: recreate deleted Business System of type Integration Server

Hi,
accidentally i deletet the business system of type "Integration Server" in the SLD. And i can't recreate it. It always says:
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Any ideas to create such a business system?
The old one isn't there in the list, after i deleted it.
regards,
ms

Hi,
If you change/delete the host name of the Integration Server after the installation in either the SLD or the exchange profile, you must adjust it accordingly in the exchange profile or the SLD, respectively
Maintaining a Business System for the Integration Server
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Regarding Integration server in Business System
Regarding Integration server in Business System
Refer editing the Business System
http://help.sap.com/saphelp_nw04/helpdata/en/59/2cb3a3c93a4c7086500b8345143418/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jul 7, 2008 2:03 PM

Problem by Maintaining a Business System for the Integration Server

Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
Naycho

Hi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo

Can we define users for both studio and integrator server

Can someone please let me know how can we define users for both studio and integrator server so that the user can be used to view UI page but not modify it.I want to define user in studio which will access the Page but not modify it. And the user in integrator server should be able to view scheduled jobs.
Thanks a lot.
Regards,
Amrit

Amrit,
Both Studio and Integrator Server support LDAP. See http://docs.oracle.com/cd/E35976_01/studio.240/eid_studio_users/toc.htm#Integrating%20with%20an%20LDAP%20System%20to%20Manage%20Users for details about implementing LDAP in Studio. For Integrator Server, see "LDAP Authentication", p. 38 (document pagination; p. 44 pdf file pagination) in the Integrator Server Guide (http://docs.oracle.com/cd/E35976_01/integrator.240/DataIntegratorServer.pdf).
RLJII

Logical System for Role Integration Server

Dear all,
I need your help to clear my confuse.From ID I had assign business system as defined by Role Integration Server but when I check Adapter-Specific Identifiers, nothing show in Logical System. I already define Logical system in SLD. but I'm not sure incase of Role Integration Server will show logical system same with role Application System or not. becasue the other one as role Application System it's fine.
Thanks and Regards
Park

Hi Park,
I could not clearly understand your question .But i think you want to know the roles of the Integration server and Application system.I would like to share some thing on their difference .Hope this will clearify you.
A business system can be configured as an Integration server or Application system:
Integration Server
The Integration server executes only integration logic available Integration Builder. They can also be identified as Pipe Line Steps. It receives XML message, determines the receiver, executes the mappings, and routes the XML message to the corresponding receiver systems. Thus configured Integration Engine is identified to be Central Configured Integration engine.
Note: Only one client of SAP system can be configured as Integration Server.
Application system
The Application system will not execute the integration logic. It in turn calls the integration server to execute the integration logic if required. It acts as sender or receiver of XML messages. So, the Application system with a local Integration Engine requires the Integration server to execute the integration logic
Thanks,
Ram.

How to create Business System in SLD with Role "Integration Server"

Hi,
We were trying to create a Business system of role "Integration Server" in SLD. However, we are getting an error saying "There is already an Integration Server defined foer the selected Technical System. Select as Application System."
We could not find any relevant BS with the role "Integration Server" for that Technical System.
Please advice.
Warm Regards,
Bhaswar

hmm
I have same situation on a fresh installation.
Also error "There is already an integration server defined for the selected technical system; select the Application System role".
But, there is no Business system at all visible and also the Business system tab of the technical system is completely empty.
What to do?
BR Patrik

Adapter Engine / Integration Server Problem

Hi,
I'm new to SAP and I have some questions regarding my new PI 7.0 SP10 setup.
Problem:
In Integration Directory, when I tried to define a communication channel, after specifying the "Adapter Type" (File in my case), I had to specify the "Adapter Engine" from a drop-down. But the dropdown list is empty!
What I've done & Observations:
1. I've recently imported the file "XI7_0_SAP_BASIS_7.00_06_00.tpz" (From the installation DVD). After importing, I've refreshed the SLD cache.
2. SLDCHECK reveals that the connection to SLD is successful.
3. RWB component monitoring shows:
    Integration Server - No light (Node cannot be expanded)
    Integration Engines - No light (Node cannot be expanded)
    Non-Central Adapter Engines -
        Adapter Engine ootspdbs02 (Red Light)
          - Self Test Failed - Details: Client 010 is not available in this system.
          - Cache Connectivity Test:
            Attempt to fetch cache data from Integration Directory failed; cache could not be updated
            [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.ootspdbs02, string], target element type: SAP_BusinessSystem)
    J2SE Adapter - No light (Node cannot be expanded)
    Tools
        - System Landscape Directory ootspdbs02 (Green Light)
        - Integration Directory ootspdbs02 (Green Light)
        - Integration Repository ootspdbs02 (Green Light)
        - Runtime Workbench ootspdbs02 (Green Light)
4. In my SLD - I've defined a business system PI_BS_01
    Role: Integration Server
    Pipeline URL: http://OOTSPDBS02:8001/sap/xi/engine?type=entry
    Group - No Group Assigned.
    Client: 001 of PI1
    Technical System: PI1 on ootspdbs02 - Release 700
Given the above observations, can anyone please point out to me where I went wrong?
Any advise is greatly appreciated.
Thank you.
Best Regards,
Ron Lai

Hi Archana,
The configuration in SLD DataSupplier is:
Latest Send Activity
     2007/01/04 09:18:09:564
Used HTTP Parameters [http host:port] [user] [protocol]
     [ootspdbs02:50100] [SLDDSUSER] [http]
Sending Node [nodeID] [hostname]
     [11621750] [ootspdbs02]
Send Result
     Success
Next Automatic Send Timestamp
     2007/01/04 21:18:08:189
Send Type
     Automatic (Time Scheduled)
Configuration Status
     Valid
The hierarchy of this business system is:
Business System:
   BS_NAUTICUS_OOTS [Role = Application System, Related Integration Server = PI1_BS_01, Technical System = TS_NAUTICUS_OOTS]
Technical System:
   TS_NAUTICUS_OOTS [Type = Third Party, Software Component = SWC_NAUTICUS_OOTS, Product = Product_NAUTICUS_OOTS]
Basically I created product, software component, technical system, business system from scratch.
I did not put any dependencies to existing products/software components.
Regards,
Ron

How to change the ROLE: Integration server in business system in SLD

Hi,
I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
In SLD, business system, 'integration' tab there is button "Associate with XI'.
I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
When I press the button "Associate with XI" and Save nothing happened.
How do i change my integration server.
Please help.
Regards,
Rehan

Hi Gaurav,
I have checked the teachnical system and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
I realised that both the business systems has been defined with role: integration server.
IN one business system i can see that there is "associate with XI" button.
But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
Can you please let me know the procedure to chnage the technical system with respect to integration engine???
PLease help as our project is held up due to this.
regards,
Rehan

Getting Error while creating Integration server Connection ...PLS help me

Hi everybody,
While creating the Integration server connection I am getting the below error.
Please help me to solve it.
I am using 10.1.3.1 .
Application Server: OK
BPEL Process Manager Server: FAILED
ESB Server: FAILED
Thanks in advance.
Ramana

Now i can able to login to my weblogic admin console and find that listen address is blank i have given the listen address as localhost now i can able to create the application server connection successfully ...Listen address blank means your server will accept connections on all network addresses i.e. on localhost, on 127.0.0.1 and on IP/Host name of machine
If you want to access this server from a remote machine as well, then better keep the listen address field as blank OR assign the value of hostname/IP of machine as listen address. In case you set listen address as hostname/IP of machine, server will not listen anymore to localhost or 127.0.0.1
1)Now iam working in local machine so that i am giving localhost .... In case i doing some bpel work in my local machine and after completing the work if want to move to my server ...do i want to change the connectionand give my server hostname ha?If your BPEL server is a remote server then better create a new connection for that (using listen address and port of that server)
How to see errors in Admin server log C:\Oracle\Middleware\user_projects\domains\Soa_base_domain\servers\AdminServer\logs ...is it i want to check it here?Yes, you need to check the logs in this directory in file AdminServer.log
How to check this?Under $Domain_Home/bin (C:\Oracle\Middleware\user_projects\domains\Soa_base_domain\bin), there will be a file setSOADomainEnv.cmd. If you open this file using notepad, you would see a setting like below -
set DEFAULT_MEM_ARGS=-Xms512m -Xmx768mThis setting defines the heap memory.
Regards,
Anuj

Related Integration server for Business System in SLD

HI All,
IN SLD we have one Technical System for PI and one TS for R/3 System.
When I crating Business System for R/3 in R/3 TS, in Integration Tab what I have to select for Related Integration Server option.
It is having None and Business System of PI TS System.
Please help me in this.
Regards,
Sree

Hey
Looks like you are defining this Business system as a Integration server.
See here is what you need to do.
Step 1:First of all create a business system for XI system itself,this business system will have details of XI system and its role will be Integration server.You can have only 1 Integration server(hence you are getting the error).
Step 2:Now define a business system of type Web as ABAP for R/3 system,this system will have role as Application system but the related integration server will be the name of the business system of PI system(the one which you defined in Step 1).
As of now,are you getting any business system name in the drop down box for related integration server while creating business system for R/3 in SLD?
If yes,then simply select that
Thanx
Aamir

SOAPFault from Integration Server because of attachment name

Hello everyone,
I'm currently building the attachment function into our adapter for IBM Lotus Notes and SAP XI.
In the Sender part, the adapter must add the attachment from Lotus Notes to the XI Message as a payload.
The following source code show how to do this:
/Create a payload from a XI Message/
Payload attachment = xiMessage.createPayLoad();
/Set the attachment name with the file name of the Notes attachment/
/I have problem with this method/
attachment.setName(notesAttachment.getFileName());
/Set the content (byte array) of the attachment/
attachment.setContent(notesAttachment.getBytesContents());
This works well unless no special file name like ("Ättachment") is entered in the method Payload.setName().
Errors will be shown in the Audit Log:
1. SOAPFault received from Integration Server. ErrorCode/Category: XIProtocol/SAP_CODEPAGE_CONVERSION_ERROR; Params: ; AdditionalText: ; ApplicationFaultMessage: ; ErrorStack: Error when converting the code page for character set UTF-8 (code page 4110): Cannot convert character sets for one or more characters.
2. Transmitting the message to endpoint http://kit-was:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during creation of multipart mime object.
and in the Logviewer:
1. enrichMessageData(): Error during retrieving the end-to-end-monitoring information
Thrown:com.sap.aii.rwb.endtoendmonitoring.util.Sxmb_Get_Pmi_Info_Fault_Exception: at sun.reflect.GeneratedConstructorAccessor553.newInstance(Unknown Source) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
But in the "Message content --> SOAP Document", the attachment name can be showed correctly:
- <sap:Payload xlink:type="simple" xlink:href="cid:[email protected]">
<sap:Name>Ättachment</sap:Name>
<sap:Description>üüüäää</sap:Description>
<sap:Type>ApplicationAttachment</sap:Type>
</sap:Payload>
I've no idea, what should I do. Apparently I did every correctly, but why SAP Integration Server didn't work?
The ABAP stack of the XI server should also support Unicode. Our XI server is 04 SP 19.
Please give me some help.
with regards
Xiang

Hi Stefan,
thanks for your reply.
The problem is that String is unicode in Java. The method from SAP is
void setName(java.lang.String name) .
In Java it is only necessary to define charset when create a string based on a bytes array.
String(byte[] bytes, String charsetName)
Constructs a new String by decoding the specified array of bytes using the specified charset.
I got the file name from Lotus Notes as a String and just gave it to the SAP method. Then the Integration Server gave an error message about the name.
Regards
Xiang

No destination for Integration Server found - XI 2.0

Hello,
I have developed a few java proxies and have had good luck using the jpf.properties file. Now, as we would like to set up more of a production scenario we are in need of moving over to the dbconnect.properties and technicalID.properties. The problem is when switching over to these files I received the "No destination for Integration Server found" error. So first off I would like to make sure we have the files configured correctly.
dbconnect.properties
hostname=xipsys
systemNumber=03
user=xiusr
password=xipswd
client=300
language=EN
... the dbconnect.properties file is correct I believe.
technicalID.properties
SAPTechnicalSystemIdentification=TS_MyTechnicalSystemName.SystemHome.MyPCName
... the TS_MyTechnicalSystemName is the technical system that I created in the SLD. MyPCName is my computer name as this is where I'm running the java proxies from.
First off, does it look like my files are configured properly?
Second, in the SLD I've configured my technical system and also a business system with similar names and specified the host as MyPCName. Is this correct?
I've also noticed that when I remove the files completely from my system I get the exact same error message however they are in the right location and have the correct names. Is there anyway to get a better error message out of the system? I know the files are in the right location cause if I use the jpf.properties in that location it works.
thx
XI 2.0

Well it's getting a lot closer. I'm getting a different error now and its showing up in tx SXMB_MONI. The error I get is...
ROUTING.NO_SENDER:Unable to find a sender
In the monitor it shows that there was a message pushed but it's red flagged and there is no sender/receiver information. Is there anything else I need to add to the java proxies?
The following is my latest configuration ....
dbconnect.properties looks like
hostname=myXIServer
systemNumber=03
user=XILDUSER
password=password
client=300
language=EN
technicalID.properties
SAPTechnicalSystemIdentification=TS_myTechSys.SystemHome.BS_myBizSys
In the SLD I have TS_myTechSys defined as a "SAP Standalone Java System" on myComputer.mydomain.com.
Also in the SLD, I have defined BS_myBizSys as a "Java System" and belongs to the TS_myTechSys Technical System.
In the exChange Profile under ApplicationSystem I have the following defined
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name
com.sap.aii.applicationsystem.serviceuser.pwd
com.sap.aii.proxy.framework.connection.timeoutInMSec
com.sap.aii.proxy.framework.destination
com.sap.aii.proxy.framework.destination.client
In addition I also get the following error sometimes...
JPF loadProfileProperties() - Could not access Exchange Profile: java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer '
com.sap.mw.jco.rfc.MiddlewareRFC'
no sapjcorfc in java.library.path
I have this file as a dll in the same directory as all the jar's.
in addition XILDUSER is part of the following group
SAP_BC_AI_LANDSCAPE_DB_RFC
Should that user have more permission?
Any ideas?
XI 2.0
One more note, I am running my WebApp from an instance of Tomcat 4.1. This is where the Java Proxies are running and it works fine using the jpf.properties. Some of the documentation I've recently found has said that it needs to be running on a SAP J2EE engine which we will not be able to do in the end.
Message was edited by: Larry Chaput
Message was edited by: Larry Chaput

Messages not processed by integration server after SP09 to SP16

Operating System: Windows NT 2003 Standard edition Service Pack 1
Database: SQL_Server_8.00, DBSL:640.00 Patch Level: 100
ABAP Kernel: Non Unicode; Release: 640; Patch: 109;
XI: Version 3.0; Service Pack Stack:16
Host: PEARL; IPAddress: 10.1.1.13
We upgraded from service pack stack 09 to 16 and since then no messages
are getting routed to integration server. We tried a cache access
though TCODE: SXI_CACHE and it said "if_http_client receive
http_communication_failure". Then we went to ICM monitoring through
TCODE: SMICM and saw that the http service that runs on 8000 port is
inactive when we tried to activate it gave an error. Here is the
snapshot from the trace file.
[Thr 3492] *** ERROR => NiIBind: service '8000' (8000) in use
[nixxi_r.cpp 3845]
[Thr 3492] *** ERROR => NiIListen: NiBind (rc=-4) [nixxi_r.cpp
767]
[Thr 3492] *** ERROR => IcmBindService: NiBuf2Listen failed for host
PEARL:8000 (rc=-4): NIESERV_USED [icxxserv.c 1549]
When we tried to access runtime workbench through integration builder
webpage it says "page not found".
When we tried to login to the J2EE visual admin using the default
account(J2EE_admin) it gave the
error "http://pearl:8101/msgserver/text/logon returned empty list of
connection parameters."
In SAPMMC we looked at the system log and saw the error "SAP Basis
System: Operating system call gethostbyaddr failed (error no. 0 )".
We tried restarting the whole server but to no effect.

since your OS is Windows try following in command at prompt
C:>netstat -a
or
C:>netstat -an
one of the above will work in NT, the list shows the listening (Open) ports and ESTABLISHED (used)..check for the 8000 which is your HTTP port.
Also in SAP check the t-code "SMICM" and then goto services and see the HTTP services running without error or not?
Hint: Port names are defined in services file located at C:\WINDOWS\systemXX\drivers\etc\services file..

Integration Server already defined ?

Similar Messages

Maybe you are looking for