Integrate BRFPLUS in to WEBDYNPRO application

Hello Experts,
we have a requirement like integration of BRFPLUS in ABAP webdynpro.We found a doubt
Doubt :- we have maintained the number range(for ex:- 1234) functionality in BRFPLUS and we want to fetch the number range (for ex:-1234)value in our webdynpro application.
could anybody guide me , how to achieve this functionality.
it is bit urgent for me
Thanks
Rakshar.

Can please tell more about your requirement.
Do you want to call BRF+ function form WD and get output of calculated number range.

Similar Messages

How to Integrate ESS/MSS to Webdynpro Application?

Hi All,
I am New to Webdynpros.
I Want to Develop Application on Webdynpro and integrate to ESS/MSS.
How to Start and what to do?
Plz Reply ASAP.
Thanks and Regards
Kiran

Most of the application in ESS have used the FPM (http://help.sap.com/saphelp_erp2005/helpdata/en/3f/20888224c544a2a01d9fe618902ae5/frameset.htm) to develop new self service applications.
You may start developing applications as described in the help link and then integrate it with ESS. You will have to maintain some setting under Homepage Framework in SPRO. There are plenty of threads describing this. Do search
Thanks,
GLM

How to Integrate HCM Process with Webdynpro ABAP Application

hi,
I have issue regarding how to integrate HCM Process with Webdynpro abap application.
I had created one HCM process for transfer using Hrasr_dt T code and also created form scenario and work flow.
How to Integrate HCM Process with Webdynpro ABAP Application
by
Parthasarathi

hi suhasini,
Thanks for your reply,
Can u explain in detail.. and Give any documents or links...
by
Parthasarathi

Unable to integrate BRFplus (NW 702) with NWBC

Dear Gurus,
I'm finding it hard to integrate BRFplus into NWBC. I have added the BRFplus related roles for the my ID. Within NWBC, each time I click on BRFplus, it popups up BRFplus on Internet Explorer.
How can BRFplus be viewed within NWBC? Am I missing some pieces?
Thanks,
Ajay

Hi, Ajay
NWBC is used for calling Web Dynpro applications. You can use any standard rol like SAP_FMCA_CA_ALL_EHP5_TRM_NWBC
to see examples of Webdynpros....
To run rhe BRFplus application you'd need to configure, at least, the following objects:
- Form Bundle type, revenue type and form scenario.
Configuring Form Bundle type you can specify the BRFplus application to be usedfor processing the form bundle type....
Web dynpro Appl. FMCA_WDY_FPF allows you to call your Form Bundle Type and run the BRFplus application.....
Asall of these tasks requires deep knowledge of Tax and Rev. Mgt I'd suggest to read carefully the SAP help documentation or contact with a TRM expert.....
I hope it should be useful....
Kind regards

Issue in webdynpro application while calling from UWL

Hi All,
I am working on APPRAISAL workflow in HCM module.
In new version of SAP has provided ABAP web dynpro application HAP_MAIN_DOCUMENT (component HAP_MAIN_DOCUMENT)
but it is not integrated with workflow. Earlier insted of this application there was a BSP application and this was integrated with workflow.
Now to integrate ABAP webdynpro application with workflow I have created new web dynpro application and calling HAP_MAIN DOCUMENT application and when I test through SE80 transaction then I am just passing Work Item ID and it is opening HAP_MAIN DOCUMENT application. I have done it as follows.
In swfvisu I am passing Work Item ID and In application I am getting business object details using this I am createing a URL and then using exit plug I am calling HAP_MAIN_DOCUMENT application
*METHOD exit1 .*
* DATA lo_nd_new_url TYPE REF TO if_wd_context_node.
**DATA lo_el_new_url TYPE REF TO if_wd_context_element.**
**DATA ls_new_url TYPE wd_this->element_new_url.**
**DATA lv_url TYPE wd_this->element_new_url-url.**
**DATA: l_cmp_api TYPE REF TO if_wd_component,**
        **result TYPE REF TO if_wd_window,**
        **l_window1 TYPE REF TO if_wd_window_manager.**
***     navigate from <CONTEXT> to <NEW_URL> via lead selection**
**lo_nd_new_url = wd_context->get_child_node( name = wd_this->wdctx_new_url ).**
***     @TODO handle non existant child**
***     IF lo_nd_new_url IS INITIAL.**
***     ENDIF.**
***     get element via lead selection**
**lo_el_new_url = lo_nd_new_url->get_element( ).**
***     @TODO handle not set lead selection**
**IF lo_el_new_url IS INITIAL.**
**ENDIF.**
***     get single attribute**
**lo_el_new_url->get_attribute(**
    **EXPORTING**
      **name = `URL`**
    **IMPORTING**
      **value = lv_url ).**
**wd_this->fire_exit_plg( url = lv_url ). "abap_true**
*** l_cmp_api = wd_this->wd_get_api( ).**
*** l_window1 = l_cmp_api->get_window_manager( ).**
*** result = l_window1->create_external_window(**
***url = lv_url ).**
*** result->open( ).**
**ENDMETHOD.**
In SE80 it is opening application perfectly in same session of new Z webdynpro application.
But when I click on UWL workitem it is not opening.
In dubugging I checked that workitem ID is passed correctly also URL is created correctly for HAP_MAINDOCUMENT but it is not opening.
Please let me know is there any setting in UWL config.
Edited by: Akshay Kale on Nov 17, 2009 11:51 AM
Edited by: Akshay Kale on Nov 23, 2009 10:07 AM

Hi akshay,
   Check the following links ,
Workitems, UWL and Web Dynpro for ABAP
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6
another that talks about swfvisu
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a002d1eb-33f0-2b10-f391-e1e0c3057c17&overridelayout=true
hope this helps.
Thanks,
Sahiba

Not able to integrate Payment Gateway with WebDynpro for ABAP

Hi,
   I am not able to integrate the Payment Gateway for Billdesk ( third party software) with Webdynpro for ABAP.
Summery of the Issue : -
(*) Data from PORTAL Application to PAYMENT GATEWAY is going Correctly but
(*) Data from PAYMENT GATEWAY to PORTAL Application is not going correctly.
Details about the Problem : -
   I have created 3 View in Webdynpro Application for ABAP.
View 1 -> Sales Order
View 2 -> Confirm Order
View 3 -> Success Message
When I am on the View 2 i,e Confirm Order, I have a UI Element ( LINK TO URL) on this View. When I click on the Link it successful takes me to the Bill desk site(Payment Gateway Integrator).After selecting the Card Type - > Master card, or Visa or Amex, I am routed to the Gateway Site of the Citibank, Where I have to enter the CARD details like Card Number, CVV Number, Expiry Date, and press the Submit Button.
Which now takes me to the final confirmation site, stating
1) Order Number
2) Bank ID
3) Merchant ID
4) Amount
5) Authorize ( APPROVED / NOT APPROVED)
Now once i click on the Submit button, It transfers the amount of the Customer to my bank account, correctly and goes back to the my portal application.
Till here it is working correctly, but 1 parameter is missing which is called "msg", and this parameter contains important information regarding the payment. This parameter is sent back form the Gateway Site to my Portal.
1) Authorize STATUS
2) Check Sum
etc... which will be finally required to decided whether I should go on to create the Sales Order for the Customer or not.
If the Authorize Status = '0300' then only create the Sales Order other wise if the status is any thing else lets say not equal to '0300' then gives the message that the Credit Card is not authorize to process the Sales Order.
Regards,
Saurabh Bhatnagar
E : [email protected]

Dear Sir,
we are implementing Retail POS (Point of sale) for one retail company. We need to integrate third party payment gateway.
it's name is PLUTAS. We have got developer kit from Plutas (For trial ) . we have installed that kit in our system.
In my program, I am triggering " PL_TriggerTransaction" using call method. After triggering method it executes method, control passes to third party software. But I am not able to catch return parameter (Responce).
So that would be great if you help me out with this issue.
I wrote following code.
REPORT ZTEST678.
INCLUDE OLE2INCL.
data : rc_plutus type ole2_object,
lpszTransData type string,
lTxnType type char4,
lpszTransData1 TYPE string,
ret_string TYPE string,
l_count TYPE i,
l_time TYPE sy-uzeit.
rc_gui type ref to CL_GUI_CONTROL.
lTxnType = '4001'.                        "----
transaction type
lpszTransData = '1234567'.          " -
trasaction data
*create object rc_gui.
create object rc_plutus 'PLUTUSEXCHANGE.EXCHANGEOBJ'(001) no flush. "no flush ."queueonly.
call method of rc_plutus 'PL_TriggerTransaction'(002) = lpszTransData1
exporting
#1 = lTxnType
#2 = lpszTransData.
wait up to 20 seconds.
write: ret_string.                        " <----
Value is not coming
write: lpszTransData1.            " <----
Value is not coming

How to use WebDynpro Applications in Guided Procedure?

Hello,
i want to use a WebDynpro application as a part of a guided procedure. Therefor i developed a simple WebDynpro application as described in the NetWeaver Developer Studio Help. The Application consists of only two views. The first view is to enter data, the second displays them. So far so good....
In the next step i wanted to integrate this application as a CallableObject for execution in my guided procedures process. The wizard asks in step 2 for the "Development component" and WebDynpro Application. But where do it get this information? Indifferently what path i enter, it only returns an error the the object is not available on the server.
EDIT: The path to the webdynpro application is something like this: http://host:port/webdynpro/dispatcher/local/WebDynproUITest/UITest
kind regards,
Matthias

Hello Dipankar,
thx for the blog! This really helped a lot!
The problem is, that you cant test the WebDynpro as a stand-alone application. What would be the best way to develop a WebDynpro Application for GP?
Is there a way to start with a 'normal' WebDynpro Application and convert this when finished in a "guided procedure ready WebDynpro for CE Application"?
I think i will contact you next week with more questions, for now on its weekend
regards,
Matthias

Webdynpro application using BI queries

Hello Webdynpro gurus!!
I am quite new to Webdynpro and am actually trying to develop a new webdynpro application that calls in some existing BI queries and displays the chart/table as per the query.
Could anybody please help me in achieving this?
Any step by step guide will be very helpful.
Thanks.
~~LB!!

Thanks Siva for your immediate response. I actually want to use only a WD application. Could you please let me know, if using the iFrame for integrating the BI query is the most straightforward process?
Is there any other way to integrate BI queries/reports into Webdynpro application?
thanks much for your help in advance!!
~~LB

PDF form generation on Webdynpro Application

Hi
I have an ABAP Webdynpro application with 8 tabs. As per the functionality, all the data entered by the user on these 8 screens has to be displayed in a PDF form as well as in an excel sheet in a defined format. Also the Adobe Lifecycle Designer is not available. How can this requirement be implemented.
One way is to use the smart form Object and integrate it with Webdynpro.
Please suggest how can such a functionlity be achieved.
Smriti Kapur

Hi Smriti,
Are you using an ALV grid in your application? if so, there should be a 'Print version' button that, when ADS is configured correctly, should produce the PDF version of the Document.
Read these two blog entries:
/people/dezso.pap/blog/2008/01/25/ads-ssl-configuration-journal-i-abap--java-640--70x
/people/george.quaye/blog/2009/05/27/an-interactive-pdf-to-guide-your-configuration-of-the-ads
Thanks,
Umair

Integrating different webdynpro applications into one

Wanted some insight on a situation where 4 different applications were developed as a part of one project but the catch is , every part had different package names and references,
now to integrate it ,into one webdynpro app(project), we are using Server Side eventing ,making one a master component and the others embedded , and it is working fine ,after included in the viewset ,
1 Is there a less cumbersome way to integrate in such a situation ??
2 is there a golden rule ,in future to follow , to develop applications separately to be integrated INTO ONE PROJECT ?
please suggest

Hi saurabh,
u can use an interface controller to combine all the applications into one.keep the the view that u want it to run at the start of the appln as ur parent and rest as the child and do all ur events within ur Interface controller.
For more reference check on to this link.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/tutorial on server-side eventing - 14.htm

How to deploy WebDynpro application from Portal

Hi Friends,
when we develop WebDynpro applications, we deploy and run the applications from IDE NWDS studio..
Is there any way to deploy it from portal?

Hi,
Wat do you mean by deploying it from the portal?
It is possible to integrate webdynpro apps in Portal
Follow this link
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/2fffe990-0201-0010-aab0-e61c3250bcf3
Regards,
Santhosh

To get login details of portal into webdynpro application

Hi All,
How to get the portal login details(user name) into my webdynpro application.
Thank you,
Harsha P.

Hi,
If you want to have portal login details from backend system (with ABAP) you should ask this question in some portal forum and ask if it is possible. This has nothing to do with workflow or UWL. Even if you get the portal user ID to the backend system, then what? Do you want to manipulate the portal roles etc. from your ABAP WD application? Then you will have even more complicated requirements to achieve with ABAP. It is not that straightforward to call different portal functionalities from backend system. You might need to do some "portal development". And eventually your ABAP WD application might come just an unnecessary wrapper component for calling some web services or whatever in portal.
Regards,
Karri

Needs a background webdynpro application running at the server side

Hi All,
We have a requirement wherein we need to have an application running all the time at the server side to capture the response coming from a web application. Based on the response that the application receives, it needs to update some backend R/3 tables.
We are thinking of a webdynpro java application.
Can anyone suggest what kind of application needs to be implemented here?
And what would be the steps required to run the application at the server side without calling the application.
Thanks & Regards,
Anurag

Hi Robin,
Thanks for the detailed explaination.
This may sound silly to you but I've another doubt which is as follows:
As you mentioned that the external web application will be sending requests to our Web service(in SOAP envelopes) and rest of the functionality can be achieved by our web service.
Actually, we are expecting only responses from the external web application. The thing is that we are sending the requests to the external web applications from our custom webdynpro application and in return the web application will be sending us 2 responses.
First response would be back to our WD java application URL(to the browser in which WD java app is running) which would get the response and display some message based on the response.
Second would be to this web service which you have just suggested. We are having two responses so that even if the browser in which the WD java application is running gets accidentally closed, the response from the external web application must get captured somewhere else and should not get lost in any case.
So, now since we are only expecting the response from the web application and we do not want any requests from the web application to our web service; how is this possible?
I am asking the above question because you have mentioned that the external web application has to request our Web service but we want is only this web service to capture the response coming from the Web application.
Or is it like the web application will send us the response string as request string to our Web Service and the web service will capture these response parameters as request parameters from the web application and do the further processing.
But in that case, we do not want any response to be sent by the Web Service to the external web application.
Please suggest if this is possible.
Once again, many thanks for the help so far.
Thanks & Regards,
Anurag

SSO b/w portal and webdynpro application customized login??

Hi,
I have one webdynpro application which has a login screen (Created as Webdynpro view). If user enters user/passord, the same gets checked from a custom table in the db (Method for checking user credtentials has been written in view controller). if user credentials are correct it performs some actions defined in webdynpro application.
I want to configure SSO b/w portal and this webdynpro application sothat when user logon to the portal and open this webdypro application, Login page of webdynpro application should not be shown i.e user credentials should be passed from portal and corresponding authentication method in webdynpro should be called to authenticate the user.
How to do the same without touching webdypro application ?
Can we call a method of webdynpro application from portal?
Regards
Deepak

1) To enable ticket authentication for the web dynpro iviews, you must maintain the definition of the system running the Web Dynpro application and set logon method to "SAPLOG"
2)Since you have customized login screen, you need to bypass this screen manually when you login from portal.
Add parameter to the application while defining the iview.Give some constant value.
Check value of this parameter in webdynpro and fire to next view.

How To Get GP Process Parameters in a Webdynpro Application runtime

Hi ,
Iu2019 ll hope you can help me to solve my problem with GP process.
Iu2019 m trying to get GP process parameters from a Webdynpro application.
I have to get parameters during the process runtime in every step of the process using
a webdynpro application with the following code:
      IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
      try {
            IGPProcessInstance processInst = rtm.getProcessInstance(processId,userContext);
            IGPProcessInstanceInfo procInfo = rtm.getProcessInstanceInformation(processInst.getID(),
userContext.getSAPUser());
            IGPStructureInfo inputstructInfo = processInst.getTemplate().getInputParameters();
            IGPStructure inputparams = GPStructureFactory.getStructure(inputstructInfo);
      } catch (GPEngineException e) {
            // TODO Auto-generated catch block
//          e.printStackTrace();
            manager.reportException("GPEngineException:"+getStackTrace(e), false);
      } catch (GPInvocationException e) {
            // TODO Auto-generated catch block
//          e.printStackTrace();
            manager.reportException("GPInvocationException:"+getStackTrace(e), false);
But printing the values of attributes with u201Cinputparams.getAttributeAs... ("param name")u201C the value returned is always 0. On the contrary if I check the same parameters structure in the runtime
GP view of the portal, the values are those that I have set in the start process wizard.
Have you a solution for this question?
Thanks in advance
Luca

hi Abhimanyu
I believe originally access to session was deliberately not made available inside WDA.
Growing security concerns due to misuse of session information and
perhaps other reasons as well.
X.509 is considered a better approach.
This may not help you in your problem.
But you may see a trend in WDA pushing more robust and client independent
approaches.
Full x.509 access should remove the need for session fiddling.
Also when developers access such session info directly, there is a possiblity
when they dont understand the technology exactly that they create a security hole.
You may know how to do safely, it is however discouraged.
Im not aware of a way to get at the session info inside the WDA framework.
Well not without a mod to the framework.
It may be possible without a mod, but I dont know the trick.
If someone has a little trick... please post.
You may need to use BSP, if your only solution requires access to the session info.
regards
Phil

Integrate BRFPLUS in to WEBDYNPRO application

Similar Messages

Maybe you are looking for