Integrate Xcelsius Report in WebDynpro for ABAP

Hi all,
I would like to integrate Xcelsius reports into WD for ABAP. This shouldn't be a problem if using EHP1 in ERP backend.
But what I would to do is to influence the report's behaviour. E.g. by clicking on a button I want the report to change.
Is it possible to trigger events from WD ABAP into an integrated Xcelsius report?
Regards
Christoph
Edited by: Christoph Hofmann on Nov 5, 2009 11:58 AM

>
Kareemullah Quadri wrote:
> Hi Thomas
>
> If we would like to write a wrapper Flex application, the generated SWF in Xcelsuis compiles only with Flex SDK 2.0.1 Hotfix 3.
> But this wrapper Flex cannot include Flashisland library as this is supported only by Flex SDK 3.0.
> What is the solution or am I missing something here ?
>
> Regards
> Kareem
I believe this is a duplicate question to another thread, but SAP supplies both a Flex 2 and Flex 3 version of the FlashIslands SWC. Just use the Flex 2 library.

Similar Messages

Not able to integrate Payment Gateway with WebDynpro for ABAP

Hi,
   I am not able to integrate the Payment Gateway for Billdesk ( third party software) with Webdynpro for ABAP.
Summery of the Issue : -
(*) Data from PORTAL Application to PAYMENT GATEWAY is going Correctly but
(*) Data from PAYMENT GATEWAY to PORTAL Application is not going correctly.
Details about the Problem : -
   I have created 3 View in Webdynpro Application for ABAP.
View 1 -> Sales Order
View 2 -> Confirm Order
View 3 -> Success Message
When I am on the View 2 i,e Confirm Order, I have a UI Element ( LINK TO URL) on this View. When I click on the Link it successful takes me to the Bill desk site(Payment Gateway Integrator).After selecting the Card Type - > Master card, or Visa or Amex, I am routed to the Gateway Site of the Citibank, Where I have to enter the CARD details like Card Number, CVV Number, Expiry Date, and press the Submit Button.
Which now takes me to the final confirmation site, stating
1) Order Number
2) Bank ID
3) Merchant ID
4) Amount
5) Authorize ( APPROVED / NOT APPROVED)
Now once i click on the Submit button, It transfers the amount of the Customer to my bank account, correctly and goes back to the my portal application.
Till here it is working correctly, but 1 parameter is missing which is called "msg", and this parameter contains important information regarding the payment. This parameter is sent back form the Gateway Site to my Portal.
1) Authorize STATUS
2) Check Sum
etc... which will be finally required to decided whether I should go on to create the Sales Order for the Customer or not.
If the Authorize Status = '0300' then only create the Sales Order other wise if the status is any thing else lets say not equal to '0300' then gives the message that the Credit Card is not authorize to process the Sales Order.
Regards,
Saurabh Bhatnagar
E : [email protected]

Dear Sir,
we are implementing Retail POS (Point of sale) for one retail company. We need to integrate third party payment gateway.
it's name is PLUTAS. We have got developer kit from Plutas (For trial ) . we have installed that kit in our system.
In my program, I am triggering " PL_TriggerTransaction" using call method. After triggering method it executes method, control passes to third party software. But I am not able to catch return parameter (Responce).
So that would be great if you help me out with this issue.
I wrote following code.
REPORT ZTEST678.
INCLUDE OLE2INCL.
data : rc_plutus type ole2_object,
lpszTransData type string,
lTxnType type char4,
lpszTransData1 TYPE string,
ret_string TYPE string,
l_count TYPE i,
l_time TYPE sy-uzeit.
rc_gui type ref to CL_GUI_CONTROL.
lTxnType = '4001'.                        "----
transaction type
lpszTransData = '1234567'.          " -
trasaction data
*create object rc_gui.
create object rc_plutus 'PLUTUSEXCHANGE.EXCHANGEOBJ'(001) no flush. "no flush ."queueonly.
call method of rc_plutus 'PL_TriggerTransaction'(002) = lpszTransData1
exporting
#1 = lTxnType
#2 = lpszTransData.
wait up to 20 seconds.
write: ret_string.                        " <----
Value is not coming
write: lpszTransData1.            " <----
Value is not coming

How to integrate WebDynpro for ABAP application with SAPEnterprisePortal7.0

Hi WebDynpro for ABAP Experts,
We developed an WebDynpro for ABAP application on R/3, and now we are planning to show this as an iview on SAP Portal EP7.0 (SAP j2EE Engine--Java stack). is it possible to integrate this application with portal?
If so can you proviode me the way how can we achieve this?
ADV Thanks
Regards
Phani

Hi Alex,
Thanks for your response.
I already created the system object R/3 Backend.
Actually some WebDynpro java applications/iViews are currently running on Portal. and the developers developed these in NWDS and deployed the .sca files on the Portal server and we created Webdynpro for java iViews.
but now the requirement is creation of webDynpro for ABAP views.
The developers developed WebDynpro for ABAP on the R/3 system. So what are the parameter values we need to give at teh time of creation of WebDynpro for ABAP iview like the Namespace, Application name etc which are mandatory values and how the Portal server detects the application, this means no need to deploy the application on the Portal server?
Shall we need to maintain any JCo Destinations or not?
Pl share your ideas.
ADV Thanks
Regards
Phani

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Web-site as iframe in webdynpro for abap

Hello,
we want to integrate an external website like google maps as iframe in webdynpro for abap-window.
Is it possible?
Regards
Oliver
Edited by: Oliver Prodinger on Apr 18, 2010 11:41 AM

Hi,
Please be aware that this UI element is deprecated and is not to be used. But we can use it in unavoidable cases.
Refer to the below link for step by step procedure on how to use the iFrame element.
http://divulgesap.com/blog.php?p=MTI5
Regards,
Lak

SAP Webdynpro for ABAP - IXOS Integration for storing documents

Hi
We have a requirement to attach documents to a web based SAP custom application and store as attachments simialr to GOS fucntionality in SAPGUI. SAP web based application is developed using web dynpro for ABAP. Atatched documents are to be stored externally in IXOS system. I am looking for fucntion modules or BAPI's that integrate SAP webdynpro for ABAP and IXOS. Requirement is below
1)     From SAP Webdynpro for ABAP application read a file form desktop and store on external IXOS system.
2)     Retrieve a file from IXOS system and display in SAP Web Dynpro for ABAP application
3)     Delete a file on IXOS system from Web Dynpro for ABAP application
Thank You

You are on right track thinking about enhancement framework.
My approach is would be in the following order.
Personalization/customization
Enhancement
Modification

DIfference Between OOPS ALV and WEBDYNPRO FOR ABAP ALV?

Hi to All,
i want some information that What is main difference when we develop ALV Report in OOPS and WEBDYNPRO For ABAP.which is good n in what way it is good?
In the Same way I m also want know that WHICH IS BETTER AMONG WEBDYNPRO FOR JAVA/ABAP.In which way?
Regards,
Ravi K

Thanku for ur valuble Information.
could u give me information regarding OOPS ALV and WEBDYNPRO FOR ABAP ALV?which is better?is there differences?
Edited by: ravi k on Mar 26, 2008 12:23 PM

Eventing in Portal page between Team Viewer and Custom Webdynpro for ABAP

We are trying to implement a new Portal page that contains a Team Viewer Iview and a custom Webdynpro for ABAP iview.
The idea is that the when a manager select one of his direct report in the Team Viewer, the custom Webdynpro for ABAP would pick up the selection_changed event and retrieve the data for the selected employee.
We followed the instruction provided by SAP in note 1112733 and it worked in our development environment. When we moved the iviews to our testing environment it stopped working.
I also used the Diagnostic Iviews provided by SAP and I get the same result: Works in Dev, does not work in QA or in Prod.
We also followed the troubleshooting steps of note 945516 and it still did not help us. We can not find a difference in our system set up.
We are therefore looking for pointers as to what could be our problem.
Thanks!
Edited by: Benoit Fortin on Feb 20, 2009 2:28 PM

Problem was solved internally:
The reasons the eventing worked in Dev and not in QA or Prod, was that we had a different level of patch for ESS/MSS between instances, which I was not aware of.
Dev was on ESS/MSS version 600 SP14 and QA and Prod was on a different level. Once we implemented ESS/MSS SP 14 accross the board, everything was good.
Edited by: Benoit Fortin on Nov 13, 2009 11:57 AM

Comparison between WebDynpro for ABAP vs. WebDynpro for Java ??

Hi,
Can someone tell me when should we go for WebDynpro for ABAP and when WebDynpro for Java. Is there any link where SAP recommends the one for the other.
Thanks in advance
Regards
Mukesh

Hi Mukesh,
Both are having its own strengths!! )
I think it all depends on your project requirement and the availabel resources.
If the developer is good in OOPs ABAP then he must go for Web Dynpro ABAP. But if anyone is good in JAVA then that person should go for Web Dynpro JAVA.
*In Short almost all Features supported in webdynpro ABAP are also Possible in webdynpro Java.
1] Webdynpro Java
Supports,
webservice
RFC Models
Accessing Portal information in Java
Easy sending E-mail
Strictly follows MVC architecture which seperate Business logic and Process flow.
Webdynpro Java is webbased programming model to develop SAP Applications.
Easy to learn
Easy to integrate in Enter prise portals.
Dynanamic Programming
*Easy access to R/3 Via RFC technology (Models)
2] Web Dynpro ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
Hope this helps and solve your Problem
Cheers,
Darshna.

Reqs for Webdynpro for ABAP

Hi All,
We are planning to integrate WebDynpro runtime environment in ABAP workbench.
We are currently on WAS 6.20. I wanted to know how can we upgrade to WAS 6.0. Will just applying patch would be enough...?? ..
What else we will need to set up developement environment for Webdynpro for ABAP..??
Thanks and regards.

Is this a standalone WebAS 620? In that case you would have to upgrade the entire system to Netweaver04S. There is no simple patch or add-in that you can install to give you Web Dynpro ABAP.
If this is an R/3 system running on top of WebAS 620 - that would R/3 Enterprise 4.7; then you would have to upgrade the entire application to ERP2005. ERP2005 is the "version" of R/3 (actually ECC 6.0) that runs on top of Netweaver04S. If this is any other application then you would have to upgrade to the appropriate release level that runs on top of Netweaver04S in a similar manner.

What is used for WebDynpro for ABAP?

hi all friends,,
what is used for WebDynpro for ABAP?
Thanks,
S.Suresh.
Title was edited by:
        Alvaro Tejada Galindo

Hi
Web Dynpro for ABAP - Getting Started
Web Dynpro for ABAP is SAPs new standard UI technology for developing user interfaces in the ABAP environment. In the long term Web Dynpro for ABAP will be the successor of the traditional screen (Dynpro) based user interface technology which is based on the SAP GUI. Available with NetWeaver 7.0 (2004s) Web Dynpro for ABAP provides the same declarative UI development paradigm as Web Dynpro for Java directly out of the NetWeaver ABAP Application Server. Web Dynpro for ABAP allows the development of user interfaces directly within the ABAP Workbench (SE80) and the Web Dynpro runtime environment is a central part of the ABAP server and can be used in any SAP solution based on NetWeaver 7.0 (2004s) without the need of an additional server installation.
Web Dynpro for ABAP allows the development of user interfaces in a declarative way by providing a mighty framework which abstracts the rendering technology from the core UI definition tasks. The Web Dynpro developer declares the layout and behavior of the UI without caring about HTML, JavaScript, browser specifics or the HTTP protocol. Instead the focus lies on designing graphically Web Dynpro components based on the Model View Controller model, which enforces a clear separation between the UI layer and the underlying business logic.
This declarative Web Dynpro programming model enforces the developer to focus on the tasks of
Designing the layout of the visible views (where should the table be placed, do I need tabs, how should the button look?)
Declaring the flow and behavior of the application (flow between views, which event is triggered by which button click, etc)
Defining the data binding (which internal table is displayed in a specific table, etc)
Implementing the event handlers and controller methods.
Without making any assumption about the used rendering technology, like which browser should be supported or if the Web Dynpro application will be later displayed in a web browser via HTML at all or in another kind of client with completely different rendering capabilities.
The Web Dynpro Frameworks provides all important UI features directly out of the box:
All elements (tables, buttons, trees, dropdown list boxes, etc) necessary for state of the art user interfaces are provided by the Web Dynpro Framework in the form of predefined UI element libraries.
Complex features and behavior of UI elements.
Internationalization of the UI. All visible strings in a Web Dynpro ABAP UI are handled by the translation system and are translated in the same translation environment like other ABAP language dependent resources. All texts are displayed automatically at runtime, dependent of the users credentials.
Accessibility features are directly built into the framework and UI elements.
A unified rendering engine generates at runtime the data which is sent to the specific client application, which is not limited to browsers but includes the NetWeaver Business Client.
All this is available in the established environment of the ABAP application server and well known capabilities like the transportation and change management system, security environment, test and performance analysis tools or remote debugging can be used like in common ABAP development.
Learn about the Web Dynpro for ABAP technology with the resources below, and post your related questions and answers to the Web Dynpro forum.
Web Dynpro for ABAP: Sneak Preview
Download, License Key Documentation, and Installation Guide available here.
Web Dynpro for ABAP: Tutorials for Beginners
SAP NetWeaver Product Management provides this set of tutorials for getting started with Web Dynpro for ABAP technology.
SAP Help Portal: Web Dynpro for ABAP
This online SAP documentation goes into detail about Web Dynpro architecture and programming, Web Dynpro for ABAP administration and security, and more.
Web Dynpro - Not Just for Java Developers Anymore   (PDF 3.8 MB)
In this SAP Insider article, SAP Product Manager Karl Kessler describes the tools of Web Dynpro for ABAP and uses a simple flight report example to highlight new and updated tools in the familiar ABAP environment.
Community Contribution: WDA Tutorial I - Getting Started with Web Dynpro for ABAP   (PDF 2.5 MB)
Software Engineer Rich Heilman provides this step-by-step guide for developing a Web Dynpro for ABAP application.
Going into Details
Basic Concepts - Selection vs. LeadSelection
In this blog, Thomas Szuecs of the Web Dynpro for ABAP development team shows how selection and LeadSelection works in Web Dynpro for ABAP.
Web Dynpro for ABAP: Recreate the SE16 Data Browser   (PDF 386 KB)
In this tutorial, Thomas Jung of SAP NetWeaver Product Management shows how to create a data browser simulator using Web Dynpro for ABAP.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/80aef577-543f-2a10-d19c-d83a565efe37 [original link is broken]
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

Scheduling Xcelsius report in Infoview for SWF format

Experts,
Can I know how do I schedule Xcelsius report in Infoview for SWF format.
My report is ready and user wanted this report everyday morning.
I am refreshing it manually and sending him.
I want to write flash file in a share location.
Please help me.
Thanks
VS8VIV

Hi,
Unfortunately, scheduling of the swf files are not possible at the moment.
You can manually export the swf to a network location.
Thanks,
Amit

Offline Interactive PDF Forms Using EMail with WebDynpro for ABAP

These is a tutorial on implementing Offline Interactive PDF Forms using Email to both send out and receive the form back using WebDynpro for Java.
Is it possible to implement the same using WebDynpro for ABAP, specifically receiving the forms via email server.
Regards,
Mark

Hi Mark,
Check this out :
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
Go to section :
Send, Receive, and Process Interactive Forms via Email in SAP NetWeaver Application Server ABAP (RIG session 4A)
and for the ABAP WebDynpro :
SAP Interactive Forms by Adobe in Web Dynpro for ABAP (Session 3A) .
I managed to make it work in my internal sytem.
Goodluck.
Cheers,
Danny

How to create an editable table in webdynpro for ABAP? Help!

Hi Experts,
I have a requirement where I have to create a webdynpro for ABAP table for new row/rows entry, delete row/rows and update row/rows data. This is something like table control in normal ABAP.
how can I achieve this? Is there any such feature in ALV component?
Any code sample will be really helpfull.
Please help!
Thanks
Gopal

Hi,
yes, the ALV is integrated into WDA, have a look at this: http://help.sap.com/saphelp_nw2004s/helpdata/en/74/fd4142646ab46be10000000a155106/frameset.htm
Regards, Heidi
PS: look at the WDA Knowledge Center under https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943, there you can find several ALV tutorials
Message was edited by: Heidi von Geisau

Integrate Xcelsius Report in WebDynpro for ABAP

Similar Messages

Maybe you are looking for