Integration adobe interactive form - webdynpro abap - digital signature

Hi,
We are developing an interactive form inside a webdynpro abap with a signature field.
The signature is not checked because there is not yet a ssl connection.
When the Web Dynpro get processed the form appears to lose the signature.
We have developed an archive process next to the affixing of the signature of the document.
Ads connection is slow, so while the Web Dynpro is processed i'm able to read this error in the form(adobe reader):
"Signed and all signatures are valid, but with unsigned changes after last signature. Please Fill Out The Following.
You can save data typed into this form."
When the page finishes processing I see this error in the form:
At least one require validating signatures.
*Clicking on "validate all" i get this error:*
"3 Miscellaneous Change (s)"
In few words, the pdf is saved and stored with a "warning" status in the signature.
Has anyone had this problem?
I also tried to create a new form and a webdynpro completely new, but the problem persists.
Reguards all
Bye
Edited by: Pierpaolo Foderà on Dec 22, 2011 6:26 PM
Edited by: Pierpaolo Foderà on Dec 22, 2011 6:27 PM

with ZCI layout, you can directly get the values from the node that is bound.
Check this thread:
[https://forums.sdn.sap.com/click.jspa?searchID=16237232&messageID=6069448]

Similar Messages

Filling dynamic drop down in adobe interactive form( webdynpro ABAP)

HI all,
Im new in Webdynpro ABAP, my requirement is to fill drop down list in adobe interactive form. i created adobe form and its working fine.
I Created context like ROOT(cardinality 1:1)->DATANODE cardinality 0:n. This context is for drop down and in wddoinit i did like this.
IN WDDOINIT ,
DATA lo_nd_root TYPE REF TO if_wd_context_node.
DATA lo_nd_datanode TYPE REF TO if_wd_context_node.
DATA lo_el_datanode TYPE REF TO if_wd_context_element.
DATA ls_datanode TYPE wd_this->elements_datanode.
navigate from <CONTEXT> to <ROOT> via lead selection
lo_nd_root = wd_context->get_child_node( name = wd_this->wdctx_root ).
navigate from <ROOT> to <DATANODE> via lead selection
lo_nd_datanode = lo_nd_root->get_child_node( name = wd_this->wdctx_datanode ).
get element via lead selection
lo_el_datanode = lo_nd_datanode->get_element( ).
ls_datanode[] = lt_dna_value[].
CALL METHOD lo_nd_datanode->bind_table
EXPORTING
 new_items = ls_datanode
 set_initial_elements = ABAP_TRUE.
 index =
while executing i'm getting this error ": WebDynpro Exception: ADS: com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.(200,101). " . can u please tell me how to bind value for drop down.
I created sample table in same form and i binded same value to table, that time its executing fine.
can u please tell me solution for this Scenario.
Thanks
Hemachandran.
Edited by: hemachandran R on Sep 12, 2008 2:27 PM

hi,
My requirement, is to use dynamic drop down in dynamic table. I am using webdynpro abap.
i populated the value in drop down.
Its working fine but the problem is how to fill the default value in drop down. because i want to bind the default value which im getting specify value from the table.because each row
im getting different values, like first row
CAR
, that CAR want to fill as a default value in drop down and second row as
BIKE
that BIKE want to fill as default value in drop down ( example drop down contain car , bike , cycle).
In adobe form i binded like this
$record.DATANODE.DATA[*].DNA_RATING
i dont know whether this one is correct or wrong .
im getting default value as empty.
please give me some solution how to do this.its very urgent
thanks
hemachandran.

Adobe interactive form with ABAP workbench

Hi Experts,
Need to know, can we run Online Adobe interactive form using ABAP ( Not webdynpro ABAP or Java) workbench? If so how? and if possible please provide the driver program which run the form & after filling it, it updates SAP data online.
Regards,
Nik

That is possible by using FLM tool. You need to buy it separately. Its an ARCH product. Or if its HR forms then you can use HCM proceess & forms.

Possible to run Adobe Interactive Forms in ABAP Webdynpro?

Hi,
Thanks all...
I was request to install Adobe Interactive Forms (Adobe Document Server) and integrate with Web Dynpro web application.
Would ABAP webdynpro could be fully integrated with Adobe Interactive Forms (Adobe Document Server)???
How could i proceed with this?
Anyone can send me guidance regarding this??
Appreciate yours assisting.
THANKS!!!
BR
Terry

I required to load JAVA engine in my sys in order to run ADS (Adode document Server) follow the attached procedure?
to do a java add-in.
-Run sapinst
-use option Java Add-in for ABAP in Additional Software Life-Cycle Tasks.
Please correct me if i was wrong.
THousand thanks,
BR,
Terry

Migrating PCR frontend-JSP forms to Adobe interactive forms-WD Abap Comp

Hi All,
We are currently on Netweaver 7.0 & ECC 6.0 and ESS - MSS Business Package 50.4. We are using JSP Forms on portal front for Personnel Change Requests (PCR's ) where in all the scenarios in the backend are heavily customized with good amount of usage of Javascripts. For certain scenarios, where in a huge amount of information is fetched from ECC 6.0 backend system, JSP are performing really bad and the total time taken to display the form is actually causing a lot of irritation to the end user.
We are planning to propose an upgrade to SAP adobe interactive forms. The prerequisite is that the business wants to reuse all the customized scenarios without any changes and just want to move towards better front end forms.
My questions are:
1. Please list benefits of SAP Adobe interactive forms - ABAP component over JSP forms (performance wise)
2. Issues with SAP Adobe Interactive forms?
3. Since Javascripts do not work in Webdynpro ABAP. How can we implement those front end checks and validations.
3. Any other options available for UI that can be suggested?
All suggestions are welcome. Quick response is appreciated.
Thanks a lot for your time and help.
Best Regards,
Anupama

Is your performance issue with the Javascript with JSP pages? or the Java script you are using within the Adobe form in your WDJ custom application using Adobe form? I have worked on PCR's using ISR framework old school it used to call as PCR and now HCM Processes and form, Developed PCR's using WDJ also integrated workflow with the WDJ PCR for approval(we never had any performance issue) infact ISR frame work was kind of slow compare to custom WDJ solution and less flexible for a developer to develop.
I have also worked created WDA custom application for PCR's , WDA is definitely better when you compare it with WDJ but I have not seen much performance issue with WDJ atleast on custom PCR solutions.
I don't have any case study to share with you, can you please tell what kind of PCR's your client is using and what kind of performance issue you are experiencing and where and why you guys are using Javascript.

Control not going from Adobe Interactive form to ABAP WD Event handler

Hi
I am facing an issue with adobe interactive forms and WD ABAP integration.
The buttons in adobe interactive form when clicked is going round and round and the control is not going to the ABAP code(WD ABAP event handler code whatsoever). I have also set the debugger but the control is not moving to the ABAP code from the adobe interactive form.
Can anyone help me what can be the issue here and how can I resolve the same?
Thanks.
Sid

Hi Babi,
In the adobe form layout library Use the Submit(which internally means submit to SAP) button from the Webdynpro Native category.
Only this button action can connect adobe to web dynpro.
Whenever we click on this particular button the event will be trigger in the ONsubmit event of interactive form UI element in the webdynpro.There we can write our abap code.Hope this will help you.
Regards,
Simi A M
Edited by: amsimi on Mar 22, 2011 11:37 AM

Creating Adobe Interactive Forms in ABAP Web Dynpro

Hi,
I am a begineer to ABAP PDF Form development. Anyone could help me to develop Adobe interactive forms (online and offline cases) using ABAP WebDynpro. I would need Thanks.step by step procedures to develop quickly. I have found the material mostly related to Java. Please suggest some links related to ABAP WebDynpro. What aee the methods that would be called to update a form, open a form and upload/download a form.
Regards,
Namita Bhan

http://www.sdn.sap.com/irj/scn/interactiveforms-elearning
the above link helps you out witht he best e learning sessions
http://wwwimages.adobe.com/www.adobe.com/enterprise/partners/pdfs/solution_in_detail_interactive_forms.pdf
this also is a very helpful document
If you have any specific queries please feel free to shoot
Cheers
Senon

Multi language support for Adobe interactive form in ABAP WD

Hi ,
I translated the adobe form in multi language in SE63, If i execute the form with passing LANGU(language) parameter, form supports for multi language.
I created XML schema based interface and if a execute interactive form in ABAP Webdynpro, i am unable to pass launguage(LANGU) parameter. because InteractiveForm element property does not have language key parameter.
Apart from creating different language dependent forms, is there any alternate way we can pass the LANGU key parameter to Interactive Adobe form???

Hi,
As far as i know when you use Adobe forms in a WD4A application, language is your "web" connection language.
You can have a look at standard class CL_WD_ADOBE_SERVICE, it's used when generating an adobe forms from WD4A. , more particulary look at method DETERMINE_DOCPARAMS.
regards

Adobe interactive forms using ABAP

Hi,
Anyone could help me to develop Adobe interactive forms (online and offline cases) using ABAP (not Java). I would need step by step procedures to develop quickly.
Thanks.
Ramana reddy

HI,
Can you try these threads
Display Smartform Pdf output in ABAP Webdynpro application
Display PDF from BAPI in Webdynpro
It might helps you.
thanks ,
Lohi.

Calling BRF in Adobe interactive form/Webdynpro application

Dear Friends,
I have a requirement that I need to call BRF in Adobe interactive form.
I would be great if you coud help me how to call BRF Event in Adobe interactive form?
Is it happening through webdynpro application?
Please share your ideas.
Thanks.
Regrds,
Preethi.

Hi,
Can anybody provide document link for BRF/Webdynpro and adobe combination ?
Thanks.
Regards,
Preethi

How to display Adobe Interactive Form from ABAP (not WDABAP)

I have created a WD ABAP application that creates an Adobe Interactive Form (ZCI) and submits it for workflow. All of the data on the form is saved in custom itables in the SAP System. The end-users are supposed to save a copy of the form at the last step in the workflow before they "Acknowledge" the task in UWL. Once the acknowledge takes place, they can no longer display the form in UWL. They want an ABAP program that will read the data from the various custom tables and display a "print" version of the form (not interactive).
I am calling FM 'FP_FUNCTION_MODULE_NAME' to get the function module for the form. I then call FM 'FP_JOB_OPEN' with the parameter IE_OUTPUTPARAMS-REQNEW set to ABAP_TRUE. The call to the form FM has the following EXPORTING parameters:
    EXPORTING
    /1BCDWB/DOCPARAMS   =
      /1BCDWB/DOCXML         =
I understand the /1BCDWB/DOCPARAMS but have no idea what needs to be done to for the /1BCDWB/DOCXML parameter. Can anyone offer any advice or assistance?

Joyce,
this is really simple - the reason you have that /1BCDWB/DOCXML is because you defined your form interface to have an XML based interface.
While this is great for ABAP Web Dynpro, because the XML is generated for you, this is NOT the case with regular ABAP.
You should choose ABAP Data Dictionary-Based Interface. You will then be able to add tables, structures and fields to your interface.
For instance, here's code from a program where I call the form in regular ABAP
data: ls_worksheet TYPE Zxxx_structure.
* Fill the ls_worksheet structure here.
* Call the generated function module
CALL FUNCTION ls_function
    EXPORTING
      /1bcdwb/docparams = fp_docparams
      worksheet          = ls_worksheet
    IMPORTING
      /1bcdwb/formoutput = ls_form_output
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4.
Notice I do not have the /1BCDWB/DOCXML Exporting parameter.
Just change your interface to a Data Dictionary Based, and add the tables/structures/fields to it.
then, go to your calling program, fill them, and pass the data through the Exporting parameter.

Adobe Interactive Forms with ABAP

Dear Fellows,
I need to know if I can develop an Adobe Interactive Form through the ABAP Workbench and Form Builder. ´Til now, I only found information about Print Forms with ABAP.
Thank You very much for Your help.
Regards.
SS.

Hi,
What version are you on? Pl take a look at the following <a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/d-f/faq%20on%20in">link</a>
http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/d-f/faq%20on%20interactive%20forms%20based%20on%20adobe%20software.faq
Regards,
Suresh Datti
Message was edited by: Suresh Datti

Showing linebreaks in Adobe interactive forms webdynpro java

Hey
Im using interactive form from Adobe to show the content of my context, but the linebreaks gets converted into spaces. Heres my scenario:
I have create a context:
Person (node)
- Name (value attribute)
- Lastname (value attribute)
I have create a view (view1) with 2 TextEdit to enter som text. This two TextEdit fields is binded to the contextnode.
I have created another view (view2) with interactive form. The interactive forms consist of 2 InputFields that is also binded to the context.
When i run the application i insert som text in the first view (view1). Then i go to the second view(view2) to display the content as a PDF. This works, but my problem is that the linebreaks I have created in the view1 gets converted into spaces in view2. I have allowd multiple lines.
My question is that:
does Adobe interactive form support linebreaks from the context? It is possible to enter linebreaks if I edit the interactive form at runtime, but I want it to display the linebreaks automaticly from the context.
Are there any way around this? Please help me out. I cant find any sap note about this issue

I know a little more about the problem now. After viewing the XML source I change the property of the inputfield.
It was like this:
<field name="verdipers_felt" y="130.7001mm" x="180.1801mm" w="101.6004mm" h="44.4501mm" locale="no_NO" access="ReadOnly">
but i changed the access to be nonInteractive
<field name="verdipers_felt" y="130.7001mm" x="180.1801mm" w="101.6004mm" h="44.4501mm" locale="no_NO" access="nonInteractive">
now view2 shows the linebreak as in view1... Buut! when im going back to view1 from view2, the linebreaks gets converted into spaces
thats pretty wierd, aint it?

Zci type ADOBE Interactive Form in ABAP Webdynpro short dump

Adobe Reader version 8.1.2
Life Cycle Designer version 7.1.4270.1.421766
ECC 6.0 patch 13
When I ran the 'FP_PDF_TEST_00' , it shows
Version Information: 710.20061024154505.342190
In my ABAP Webdynpro app., it has 3 inputfields.
In the Form layout, I changed the form layout type to 'ZCI' for interactive form, and Insert the WebDynpro Script.
And in the ABAP Webdynpro view layput designer, I enabled the pdf form element.
All objects compiled without any problem.
During the runtime, it got the following short dump:
21 METHOD       CX_WD_GENERAL=================CP    CX_WD_GENERAL=================CM003     5
    CX_WD_GENERAL=>RAISE
20 METHOD       CL_WD_ADOBE_SERVICES==========CP    CL_WD_ADOBE_SERVICES==========CM008   193
    CL_WD_ADOBE_SERVICES=>CREATE_PDF
19 METHOD       /1WDA/LADOBE==================CP    /1WDA/LADOBE==================CCIMP 1955
    CL_INTERACTIVE_FORM_ZCI=>IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT
Our BASIS sent me the ADS trace:
SAP Interactive Forms by Adobe
Render Error Report
'pdf' Log Entries
restoreState is not a valid attribute of subform, Attribute not loaded. Line 5.
Invalid node type: dataGroup
The fault occurred on line 0.
The SOM expression '$record.BAPIBNAME' for the dataRef specified on field 'BAPIBNAME', resolved to an incompatible node type of 'dataGroup'.
Any comment or advise?

Hi,
As far as i know when you use Adobe forms in a WD4A application, language is your "web" connection language.
You can have a look at standard class CL_WD_ADOBE_SERVICE, it's used when generating an adobe forms from WD4A. , more particulary look at method DETERMINE_DOCPARAMS.
regards

Relationship between WebDynproContext and Interactive Form (WebDynpro ABAP)

Hi,
I created a WebDynpro application including an interactive form. The context of the view contains a node 'Employeeinfo' with a further node 'Employeerecords' and a Attribute pdfSource. The node Employeerecords contains 2 Attributes: Employeename and Position.
the structure looks like this:
CONTEXT
___Employeeinfo (node)
______Employeerecords (node)
_________Employeename (attribute)
_________Position (attribute)
______pdfSource (attribute)
Employeerecords should be used as a table with the columns Empl.-name and Position. The Content of this table is filled by a Supply-Method.
I bound the properties of the interactive form like this:
pdfSource-> pdfSource
datasource-> Employeerecords
The Interface of the interactive Form is XML created by Context of the webDynpro Component.
When I start the application it is showing me an empty form allthough the Content was created correct by the Supply-Method ( I tested this with a WebDynproTable element in the same View). The table seems to be there ( I check this with a seperate color) but the Rows are not created.
It seems to me that there would be no relationship between the WD-Context and the Interactive Form.
Do you think it is a design mistake or a software problem?
I work with the following software components:
AdobeLifeCycleDesigner 7.1
Adobe Reader 7.0.9
SAP NW 04s
SAP GUI 6.4
ADS is working fine.
Could you please help me?
Thank you,
Nadin

check the following points
(this is an old version of requirements but still will help)
2-1 The SAP NetWeaver Developer Studio (Support Package Stack 11) including Adobe LiveCycle Designer (forms design tool) is installed on your computer.
2-2 You have access to the SAP J2EE Engine (Release 6.40). (Note that you can download an evaluation version (Sneak Preview SAP Web Application Server 6.40 Java) from the SDN Download Area at https://www.sdn.sap.com/sdn/downloadarea.sdn.)
2-3 Adobe Reader 7.0.x is installed on your computer.
2-4 The Active Component Framework (ACF) of the Interactive Forms integration is installed on your computer. With SP Stack 11, calling a Web Dynpro application that includes a PDF form for the first time should automatically install the ACF in the background. If you experience
difficulties that may be related to the frontend installation, please see SAP Note 766191 on the SAP Service Marketplace for manual installation.
2-5 The Adobe document services are configured on the SAP J2EE Engine you are using. To access the Installation and Configuration Guides for Adobe document services, go to http://service.sap.com/nw04installation → SAP Web AS → SAP Web AS 6.40 SR1 and Related Documentation → Adobe Document Services.
2-6 Basic knowledge of developing Web Dynpro applications. For helpful information about Web Dynpro, go to https://www.sdn.sap.com/sdn/developerareas/webdynpro.sdn?node=linkDnode6-2.
regards,
-ag.

Integration adobe interactive form - webdynpro abap - digital signature

Similar Messages

Maybe you are looking for