Multi language support for Adobe interactive form in ABAP WD

Hi ,
I translated the adobe form in multi language in SE63, If i execute the form with passing LANGU(language) parameter, form supports for multi language.
I created XML schema based interface and if a execute interactive form in ABAP Webdynpro, i am unable to pass launguage(LANGU) parameter. because InteractiveForm element property does not have language key parameter.
Apart from creating different language dependent forms, is there any alternate way we can pass the LANGU key parameter to Interactive Adobe form???

Hi,
As far as i know when you use Adobe forms in a WD4A application, language is your "web" connection language.
You can have a look at standard class CL_WD_ADOBE_SERVICE, it's used when generating an adobe forms from WD4A. , more particulary look at method DETERMINE_DOCPARAMS.
regards

Similar Messages

Multi language support for Adobe interactive form

Hi ,
I translated the adobe form in multi language in SE63, If i execute the form with passing LANGU(language) parameter, form supports for multi language.
I created XML schema based interface and if a execute interactive form in Webdynpro, i am unable to pass launguage(LANGU) parameter. because InteractiveForm element property does not have language key parameter.
Apart from creating different language dependent forms, is there any alternate way we can pass the LANGU key parameter to Interactive Adobe form???

Hi Thomas
Let me share my few more investigation on the same, I chaged form each element property to login language.
and translated form to other languages. If directly execute form in sfp with loging in different language i am getting right result. it means even no need to pass the LANGU parameter.
But same thing if i execute from Webdynpro i am getting default 'EN' language form, even though i login in 'DE' language.

Multi-language support for user-specified text strings used in the forms

multi-language support for user-specified text strings used in the forms
Instead of creating multiple forms, 1 in each different language, for the same service, is there any workaround?

Hoan - is your question what are the considerations when creating multiligual catalogs? If so, I can tell you that at other clients I have seen them use a single catalog for one or two languages. For the two langugages, such as Spanish/English, you can create a single catalog with both of them. Once you get to more than two languages, the catalog would get unweildy and is therefore not suggested.

Chinese language support for adobe reader for HP WEBOS?

is there any traditional chinese language support for adobe reader for HP WEBOS?
if yes, where can I download?

Pat, I got an answer this morning. Not sure if you saw it because I don't see it posted here for some reason. This is the answer:
Re: forum support for Adobe Reader
created by Nikhil.Gupta in Adobe Reader - View the full discussion
The request being sent to the akamai server, (even when the Reader updater setting is turned OFF) is for updating the Adobe Approved Trust List (http://www.adobe.com/security/approved-trust-list.html).
The Adobe Approved Trust List is a program that allows millions of users around the world to create digital signatures that are trusted whenever the signed document is opened in Adobe® Acrobat® or Reader® software. Essentially, both Acrobat and Reader have been programmed to reach out to a web page to periodically download a list of trusted "root" digital certificates.
If you want you can specifically turn off the auto update functionality for the same by navigating to Edit > Preferences > Trust Manager from within the Reader application. Look under the "Automatic Updates" section and you can change the setting as required or chose for the application to ask before updating the root certificates.

Adobe interactive form with ABAP workbench

Hi Experts,
Need to know, can we run Online Adobe interactive form using ABAP ( Not webdynpro ABAP or Java) workbench? If so how? and if possible please provide the driver program which run the form & after filling it, it updates SAP data online.
Regards,
Nik

That is possible by using FLM tool. You need to buy it separately. Its an ARCH product. Or if its HR forms then you can use HCM proceess & forms.

Problem with ACF for Adobe Interactive Forms

Hi Gurus,
I had created an adobe interactive form using web dynpro for abap, but I am getting the 500 connection timed out error in the browser when I test the web dynpro application. Where as a normal web dynpro application without adobe form is running successfully.
The system details are :-
     Adobe LiveCycle Designer 8.0
     NW04S SPS9
     Adobe Reader 9
     IE 7.
I followed the note 766191 and downloaded and installed ACF(for NW04s and higher version supported upto acrobat reader 9) from browser itself.
I also followed the note 1150277 for enabling IE settings on ActiveX controls. And I checked in IE with Tools->Internet Options->Programs->Manage Add-ons, but the ACF components were not available.
Please help me out.
Thanks in advance,
Sriratna.

Hi Aleksandar
Did you get a solution to this issue
Im having the same problem, If you have a solution please forward
Thanks
Naziem Mahomed

How to integrate Flashisland for Adobe interactive forms

Hi Experts,
Can you please help us in understanding how to integrate Flashisland with adobe interactive forms?
We need to add swf file in the interactive forms, which will be used in webdynpro abap application.
Any idea will be helpful for us.
Thanks for the support.
Regards
Sathish

Hi Sathish,
You can not add swf file in interactive form, however you can integrate you flash island with web dynpro ABAP application.
Adobe flash island and adobe interactive form are two different things and have different purposes.
You can have adobe flash island and adobe interactive form in a single WD application(even as part of the same screen), but still there will be integration on the data level not on UI level. The UI elements for both will react separately from each other and there can't be any integration of adobe flash island inside adobe form.
However you can develop a flash application using which you can view adobe interactive form similar to adobe reader and use this flash application as part of your WD ABAP application but that doesn't make any sense as without flash island we can show it in WD ABAP view.
I hope this will clear your doubt.
Regards,
Vaibhav

Multi-language support for ABSL messages

Is there some best practice or feature for multi-language support of ABSL messages (as it exists for the UI since 3.5). Currently we are maintaining messages in several languages (one message entry in the BO per language) and depending on the current user language we raise the respective message. However, with an increasing number of supported languages this becomes quite tedious.
- Daniel

Hi Daniel,
unfortunately there is no other way than the one you described. One thing that may make your life abit easier: In a business object you can refer to messages from another business object. This means you can create one business object "messages" that holds all messages so that you have all messages in one .bo file and not spread across all your BOs. The translation process is easier, if you have all your messages in one file.
Best regards,
Thomas

Multi Language support for lost password management in OAM

We are trying to implement lost password management with multi-language support. We have updated lpm_changepwd.xsl for UI changes. Some of the text on the password change screen come for the lpm_changepwd.xsl. How can we have the text on the password change screen in multiple language?
Thanks.
Vinay

Was able to do it by adding new files to the shared folder and updating the style in the lang folder to point to the new files.

Multi language support for Product Information Management

Does Product Information Management support mutiple langauges and to what extent? For example, an Item Description can be entered for several language but can the user-defined attributes be entered for several languages?
Where can I find more documentation of the multi-language support of PIM?
We are on Advanced Product Catalog version 12.0.0.

Was able to do it by adding new files to the shared folder and updating the style in the lang folder to point to the new files.

Visual Admin service not present for Adobe Interactive forms

Hi EP experts,
i want to use Adobe Document for creating Adobe Interactive forms in webdynpro java.
but initially i want to activate Adobe Document Service from Visual Admin..
For this ,Under Cluster tab of visual admin, i want to select Document Services Configuration to assign the credential under com.adobe~TrustManagerService.
But in visual admin of EP 6.0 SP19 there is no Document Services Configuration under services of cluster tab...
To enable this ,is there any need of any patch-up to be installed for Adobe Document Service.?
How should i confirm if alreadt respective Adobe Document Service or patch is Installed on EP server 6.0 SP19.
Waiting for reply..........
Regards:
Hanif

Hi
Yes,We have to install Adobe Document Service patch to get access of its service .
To Check whether it is installed or not go to Netweaver administration -- configuration --services -- adobe doc service - click on this link ,proper message will be display about its availability.
Best Regards
Satish Kumar

Authorizations for Adobe Interactive forms

Hi,
During Adobe configuration I encounter serious trouble in determining the needed authorizations. We implement basic Adobe forms initiated by managers.
Can anyone please instruct which SAP ECC roles are needed for executing Adobe Interactive forms?
Situation
We assigned the Adobe roles:
SAP_BC_CM_USER
SAP_ASR_MANAGER
The manager has also assigned authorizations to view PA objects for subordintes.
With extended authorizations I can start new process. However, when the process is started with same user but with the authorization mentioned above I receive the following error:
"No Adobe Form Is Assigned to the Scenario"
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: No Adobe Form Is Assigned to the Scenario
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.raiseExceptions(FcISRProcessEvent.java:1980)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrGetFormUrl(FcISRProcessEvent.java:1042)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.setTemplateSource(FcISRProcessEvent.java:459)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:798)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:380)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:409)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:577)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowForm.onBeforeOutput(VcISRShowForm.java:215)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowForm.onBeforeOutput(InternalVcISRShowForm.java:435)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.VcISRShowFormInterface.onBeforeOutput(VcISRShowFormInterface.java:137)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface.onBeforeOutput(InternalVcISRShowFormInterface.java:136)
     at com.sap.pcui_gp.isr.isrprocessevent.showform.wdp.InternalVcISRShowFormInterface$External.onBeforeOutput(InternalVcISRShowFormInterface.java:212)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:603)
Help is greatly appreciated and will be rewarded when useful!
Regards,
Thomas

Hi Tom,
When you are familiar with authorizations in PFCG trabsaction you are finaliar with S_DEVELOP if not ask the authorization team on your project.
Basically this authorization object handles the read/write etc authorization related to devlopment objects. If you implement Adobe forms you will probably develop your own forms or at least copy the SAP forms to customer namespace.
For Adobe you will therefore have 2 custom development objects (1 for the form and 1 for the interface that is automatically generated). The end-user shoulf have at least READ access to these objects. If not the portal will trow an error on this.
To determine the tech names of the objects find the form and related interface in transaction SFP. These should be inserted in the object S_DEVELOP in the role for the end users.
You may want to consider to put the value Z* in the object which will give authorization for all the custom developed objects.
If you can't find the object reply again and i will send a screenshot.
Finally, make use of the splended transaction ST01!! It will make your life a lot more easy in portal! It traces all the authorizations needed and missing for any user you specify. After activating the trace and running a portal scenario the log will tell you want went OK and what not on an authorization object level.
Good luck,
Thomas

Web Dynpro render configuration for Adobe Interactive Forms

Hi,
Is there any possibility to check rendering configuration for Web Dynpro application? I built web dynpro application which shows simple Adobe Interactive Form. In Sap Adobe LiveCycle Designer all buttons of Interactive Form are working (JavaScript) but in the form showed by web dynpro application in IE buttons have no action. Do You know what is the cause or where to search?

Hi Pawel,
The interface of the UI element InteractiveForm contains the method SET_LEGACY_EDITING_MODE, which in turn contains a Boolean parameter. The form is then ready for input
method WDDOMODIFYVIEW.
data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
check first_time = abap_true.
LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT(u2018INTERACTIVE_FORM_1u2019).
LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
endmethod.
Regards,
Runal

License cost involved in HCM Process and Forms for Adobe Interactive Forms

Hello All,
We are planning to implement HRAS business package and use HCM Process and Forms.
There are lots of developments involved and before to start with, i would like to understand is their any license cost involved for using Adobe Interactive Forms and also if we are doing new enhancements to the forms.
Also send me some links about the license involvement if any ?
Thanks & Regards & Cheers
Vj

Check the following link:
ADS Licence for SAP ESS MSS
Regards

WebUI Print Preview (Action Definition - Print) for Adobe Interactive Forms

Hi All,
As mentioned in subject, how to define an CRM Action Definition (with or without Action Condition) to Print an Adobe Interactive Forms. We know how to define a setting for Print Preview function in CRM WebUI via Action Definition - Smartforms Print. Now we want to print preview from CRM WebUI document on Form designed in Adobe Interactive Forms (tx SFP).
We have tested using Action Definition - External Communication, we can set the AIF form here. We tested in GUI (tx crmd_order) and it works. But when testing preview on CRM WebUi it shows "Error in Smartforms".
Somehow it still detect as Smartforms instead of Adobe Interactive Forms.
We prefer if this preview can be done via Action, because it is straight forward function for printing.
Should we use Action - Method Call instead ? How is the approach to do it in Action - Method Call ?
Any one try this before? Appreciate your sharing here.
Thx & Rgds,
Gun.

Hi Gunawan,
if I got you right, what you want is: Call your AIF when someone clicks on the "print preview" button in CRM WebClient. This should all work using a print action like with normal SmartForms.
I faced this problem some months ago on CRM 6. The problem here was quite simple: The SmartForm interface and the one of AIF are not compatible. Thus the service used for calling the print action from WebClient failed.
For handling this problem I enhanced the print service to call AIF correctly.
In customizing I used print actions that call a method.
As mentioned this lays back some months already. Maybe SAP came up with a better solution by now. I saw AIF to have multilple interface types. One is an interface compatible with SmartForms. Probably you can use this one and the print service will work without any enhancements or modifications.
cheers Carsten

Multi language support for Adobe interactive form in ABAP WD

Similar Messages

Maybe you are looking for