INTEGRATION ENGINE CONFIGURATION ERROR
Hi all,
I configured integration server through SXMB_ADM,but i'm getting error..
Current Configuration (local):
Role of Business System: Integration Server
Client 000 is Integration Server
Corresponding Integration Server: http://xxx:yyy/sap/xi/engine?type=entry
System Landscape:
Errors No access to system landscape at present
Comparison of Current Configuration with System Landscape
regds,
vasanth.
Hi Vasanth,
You are getting this error because the Pipeline URL parameter defined for the XI Business System in SLD is either empty or different than the one defined in "Integration Engine Configuration" in the TCode: SXMB_ADM.
Check the same. I hope this provides you a solution.
Regards.
Praveen
Similar Messages
-
[Integration Engine Configuration Data] Error: No access to system landscap
Hi all,
When configuring Integration Engine Data (To go to 'Integration Engine Configuration Data' screen: Tcode: SXMB_ADM -> Choose: Integration Engine Configuration -> F8), we want to load Configuration from System Lanscape by choose F6, an error occur with message as below:
No access to system landscap
So that we can't load configuration from our System Landscape.
We have correctly configured other below:
- We use http port for corresponding Integration Server.
- Business System with role 'Integration Server' created correctly in SLD.
- T-code SLDCHECK is all OK.
- T-code SXI_CACHE is all OK.
Anyone can please help me correct this error ?
Point will be reward for any valuable answer,
Thanks a lot,
Vinh VoPlease can you check if your RFC destination SAPSLDAPI and LCRSAPRFC are working both ABAP and Java stack.
just check the reply from Udo and jai's reply
R3 Connecte XI 3.0 Problem
also check page no 18
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283 -
ERROR Integration Engine configuration
hi all, i have an error. en sxmb_adm -->Integration Engine configuration y configured next parameters:
rol:Integration Server
corresponding Int. Server: http://<server>:<port>/sap/xi/engine?type=entry
When press in SL buttom, and error occure: No Access to SLD at present.
What should i Do?
Rgds
Message was edited by:
Rodrigo Pertierra
Message was edited by:
Rodrigo Pertierraall RFC ping fine.. when execute TC SLDCHECK i get this:
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_XD0
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: <server>
port number: <port>
user : sldduser
Use transaction SLDAPICUST if you wish to maintain the SLD server access dat
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_XD0
gateway host:
<server>
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
In transaction SXMB_ADM-->Integration engine configuration , when i do a check get this
Current Configuration (local):
@5F@ Role of Business System: Integration Server
@5F@ Client 200 is Integration Server
@8S\QURL@ Corresponding Integration Server: http://<HOST>:<PORT>/sap/xi/engine?type=sender
System Landscape:
@5C\QErrors@ No access to system landscape at present
r
Comparison of Current Configuration with System Landscape
@5B\QOK@ Role of Business System: Current Configuration = System Landscape
Message was edited by:
Rodrigo Pertierra
Message was edited by:
Rodrigo Pertierra -
CJS-30059 Java EE Engine configuration error
Hi,
I am installing Solution Manager 4.0 SR2 on windows X86_64/DB6.
I have stuck on forth phase from last.
Remaining phases (not yet completed) are:
- Configure System Landscape Directory
- Configure CAF
- Configure Adobe Document Services
- Prepare to install minimum configuration
Error in current phase - "Configure System Landscape Directory" is as under:
- WARNING 2008-02-09 16:57:48
CJSlibModule::writeWarning_impl()
Execution of the command "C:\j2sdk1.4.2_15-x64\bin\java.exe -classpath F:/usr/sap/SM1/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX PNBSAP01:50000 J2EE_ADMIN XXXXXX" finished with return code 1.
- ERROR 2008-02-09 16:57:48
CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine.
- ERROR 2008-02-09 16:57:48 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
First I am trying again with downgraded version of j2sdk from 1.4.2_15 to j2sdk-1.4.2_12. I hope this should work. If not, is there any way, so that i skip this phase "Configure System Landscape Directory" and jump to next phase? I can configure SLD manually later-on. Please suggest is this the right approach?
Please help.
Thanks,
- GauravHI,
I think SAP recommend using J2SDK1.4.2_15. Since this windows, have your java env as >> Drive:\j2sdk1.4.2_15...
Try if this is gonna work.
Thanks, -
CJS-30059 Java EE Engine configuration error FCO-00011 The step configCAF
Hallo
trying to install SAP EHP1 for NW 7.0 Developer Workplace for AS Java (no Abap) I get the error:
CJS-30059 Java EE Engine configuration error.
FCO-00011 The step configCAF with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|
SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|
configCAF was executed with status ERROR ( Last error reported by the step :Java EE Engine configuration error.
DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION: Connection reset:: '.).
which is very similar to an error here from October 2008 so I ask if anyone can help?
For me under windows xp on the pc installing the two sap dvd's "SAP EHP1 FOR SAP NETWEAVER 7.0 Developer Workplace"
and "Kernel 7.01" this happens in step 33 of 37 steps.
In sapinst_dev.log just beforehand I see
"NWCallJava: Arguments passed: ROLE=CAFAdmin, ACTIONS=com.sap.caf.rt.caf.auth".
With kind regardsHi Marco
well yes it was very strange ... but it is now installed.
I think I'd better put a question into the main NW forum.
Happily I have someone here who is a genius and found out what was happening ...
1) the port 50000 wasnt useable, wasnt even in the log, but 50001 for https worked, so https:/localhost:50001 worked but http didnt;
2) a parameter "handlePromotionFailure" was used but not understood so the VM couldnt start
3) on top of that, being a huge concern, we have host names longer than the sap limit of 13 characters.
I have tried to assign you 6 points I hope it worked.
With kind regards
David -
Integration Server configuration error
Hi all,
I have an issue with the XI Integration server configuration.
When I have tested the configuration I have detected that there is an error in the Integration server (transaction SXMB_ADM)
The value was:
http://xxx:xxxx:/sap_xi/engine?type=entry
instead of
http://xxx:xxxx/sap_xi/engine?type=entry
note that the fisrt value have : after the port number.
I have tested the SLD Bussines System configuration and had the same issue, I have solved too.
But when I execute the test for integration server in transaction SXMB_ADM i have the next message:
Corresponding Integration Server: Current Configuration <> System Landscape
For the SLD Role of Bussines System the value in this test is the old value, not the new.
Could somebody tell me if i forget something?
Thanks in advance,
RPHI,
This is somthing related to Cache . Try to refresh Cache.
see below links regarding cache
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
Regards
Chilla -
SXMB_ADM settings in Integration engine Configuration
Hi , with reference to the blog
How do you activate ABAP Proxies?
--- refer to the step ---2 Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
Now if I do this step., then IDX5 will no more work,, rather weo2/o5 will start working.....is this ok,, i mean changing the Role of Business System = Integration server to Application system??, the usage of IDx5 will cease to exist,
ArnabHi,
oh i am sorry, you mean to say, as per blog,
How do you activate ABAP Proxies?
am I was supposed to do this setting for SXMB_ADM in r3 , not in XI.....is this what you meant??
Also , with reference to the above link, while creating the HTTP connection, it is giving a popup messehe, HTTP connection may not be secure.....what can be the problem due to this due to insecurity!!
Thanks in advancee!!
Edited by: Arnab Mondal on Sep 25, 2008 1:32 PM -
Integration Engine -- Configure Sender/Receiver ID
All,
I'm trying to configure senders and receivers (using SAP PI 7.1) in order to prioritize messages afterwards...
My SAP ECC 6.0 system will send idocs (= business system) and my receiver is a business component.
Configuring my send is no problem. Idoc structure and namespace appear in the sender interface tab, bu when I want to configure my business component as a receiver, no interfaces appear in the list.
Only the following is appearing in the Receiver Interface list:
NAME NAMESPACE
InterfaceCollection http://sap.com/xi/XI/System
When I check my business component in the IB Directory, sender and receiver interfaces are clearly mentioned.
Can business components be used to configure senders and receivers?
Did I forget something?
Please advise.
Thanks a lot
DimitriHi Udo,
I have a receiver agreement with the following information:
Sender:
SEDCLNT312 (SAP ECC system SED client 312)
Receiver:
component: BC_EAI (business component)
interface: SI_IN_DIMONAO_A
namespace: http://www.securex.be/MF0401/DimonaOut
Then I go to Configure Sender/Receiver ID and choose BC_EAI as service.
I manually type in the namespace and the interface, but then I get an error saying
"SI_IN_DIMONAO_A is not an interface" (Exception of class CX_XMS_WRONG_INPUT)
ps: do you think the problem is solved when I use third-party business systems instead?
Thanks
Dimitri
Edited by: Dimitri Sannen on Jun 3, 2009 2:16 PM
I think I found the error: I manually added both interface and namespace and then the error is triggered.
But when I added the interface and then I put " * " for the interface, no error appears. Also the other way around, * for interface and namespace filled in.
I must test this in order to be sure this works.
Edited by: Dimitri Sannen on Jun 3, 2009 2:46 PM
When I test with a Business System as receiver, the same this happens.
I cannot indicate any receiver interface. So the same phenomenon with both a business component and business system.
Can it be this is a bug? -
Error: System not configured as XI Integration Engine
Hi All,
I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log
"2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText: ErrorStack: System not configured as XI Integration Engine
2007-11-29 09:28:45 Error Transmitting the message to endpoint http://p2p:8003/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
what might be the possible errors..
regards,
RajeshHi Rajesh,
you can go through these chek steps
1)go to SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server
2) go to sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine? whether the link in sxi_cache for AE cache is showing green traffic signal and also perform a delta refresh.
3)Check whether your business system is tied to the integration server in SLD.
4)In the transaction sxmb_adm -> Integration Engine Configuration can you check whether that role has been defined as Integration Server.
hope these checks will solve your problem
Thanks
sandeep sharma
PS:If helpful Plz reward points
Also you may check whether in specific configuration you may need to add Category as Runtime Engine_Type and current value as HUB. -
System not configured as Integration Engine
Hi Friends ,
I have written an outbound client proxy for my interface . I am using XI to File Adapter scenerio .
When I run the zprogram in R3 then I get the error
System not configured as Integration Engine ...
Please suggest .
Best Regards
ChanHi Chane,
Go to SXMB_ADM->Configuration->Integration Engine COnfiguration->Choose your R/3 system as Application System
Refer this Configuration Guide - Page no 27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy -
System not configured as XI Integration Engin
Hi Experts,
My system working fine up to yesterday but today morning when i came and saw this error is comming <b>System not configured as XI Integration Engin</b> this error is showing in MONI ..
Regards
RaoHi rao,
Please see the following links.
ERROR Integration Engine configuration
one more
integration engine
Kindly reward points for useful answer.
Regards,
Vishal -
RWB: System error in INtegration Engine, Adapter engine OK
HI All,
I have an interface converting IDOCS from R/3 into Text files and sending them to Legacy system via XI.
Data is flowing correctly, however I can see some errors in the RWB. (SXI_MONITOR is clean, no errors)
Upon investigation, I found that its has transmitted the file correctly, however this INtegration system error is shown.
To explain further:
BUssiness syst name of R/3 = BS_R/3
Bussiness syst name of legacy = BS_LEGACY
Bussiness service used = BS_SERV_R3
Message INterface = MIIA_R/3
So in RWB:
Message from BS_R3 to BS_LEGACY are SUCCSSFUL (Adapter and Integration engine , both success)
Message from BS_SERV_R3 to MIIA_R/3 (Adapter engine Sucess but INtegration engine = System Error)
Is it that the messages are going fine and the acknowledgements are failing or something like that.
Appreciate your guidance on same.
Many thanks
ShirinHi Shirin
I got a confusion understanding above
Scenario is IDOC R/3 -> PI -> Text Files -> PI -> Legacy system ?
if you have BS_SERV_R3 to MIIA_R/3 implemented for acknowledgments then definitely thats the error. But please share how you are getting ACK to understand and resolve error.
Thanks
Gaurav -
ABAP Proxy configuration Error (Not able to connect R/3 to IB )
Hello All...
I am trying to configure the connection from R/3 to XI using the ABAP proxy generation.For that I have followed the steps given in the below blog
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
We created all the credentials required for the XI and R/3 side configuration and its working fine individually when we have tested for the connection and also assigning this at SXMB_ADM,but in integration engine configuration,when I am trying with the URL <b>dest://<RFC destination(http</b>).Its giving error and in sproxy at R/3 its giving that no integration engine is connected to Business system.
Whats worng with my configuration.How can I resolve this.
I am having R/3 system WAS 6.40Hi,
<i>But when I am giving the path prefix as you have specified I am getting an Error Query String Not Allowed.</i>
I think thats the warning not error. Just press enter again and go to the logon detail Tab and give the userid password
<i>And how can give the SLD details using the SLDAPICUST.</i>
go to transaction SLDAPICUST and give the following details:
Alias name :any name u want
Prim: check this box
Hostanme: give the Hostname where your SLD (XI server name if you are using the XI SLD)
PORT: Java Port
UserId/Password: for XIAPPLUSER
I think you are missing on the configuration. I think its better if you go through the weblog again.
Regards
Vijaya -
Integration Engine does not connect with SLD
Hi all,
We have an XI 3.0 system that acts as QUA system in our track. This XI 3.0 system is connected to a central SLD installed on a PI 7.1 system that acts as our DEV system.
Everything seems to be OK in the Java part. We refresh the caches successfully and enter the SLD in DEV system.
We have a problem, though with the SXI_CACHE transaction. It shows the following message:
"Unable to refresh cache contents.Error during last attempt to refresh cache"
And the detail of the error is: "LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
We have checked in the SLD and the Business system is created.
In transaction SXMB_ADM when checking the Integration Engine connection with SLD we get the following error: "No access to system landscape at present"
In the Runtime Workbench of the system, when checking the Cache Connection, the Integration Engine part shows a warning. In the RWB also the Self Status Check of the Integration Engine gives errors:
"Are roles in SXMS_CONF_ITEMS and SLD consistent?"
We have already followed all the post installation guides, and the cache checks, and SLD checks guides.
Do you know which the soltion could be for our error??
Thanks!Hi,
We have checkes
SM59: TCP/IP Destination: LCRSAPRFC y SAPLSDAPI. check the program ID is correct.--> connection test goes OK
HTTP destination: INTEGRATION_DIRECTORY_HMI: do a test connection: result=500--> connection test gives us 500 result
SLDAPICUST: Check the user and password and the server defined. the PI server should be the main server.--> checked, OK
SXMB_ADM>Integration Engine Configuration: Check if the destination is properly defined. should be dest://http://<server><port>/sap/xi/engine?type=entry> checked. OK
Check RZ70: wich configuration you have there?--> The configuration in the RZ70 for the SLD is pointing to the DEV system, so it is correct
SLDCHECK results:
"Properties of RFC destination SAPSLDAPI
RFC host: %%RFCSERVER%%
program id: SAPSLDAPI_XXX
gateway host: XXXX
gateway service: XXXXX
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: XXXXX
port number: 50000
user : XIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
(...more...)
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system XXX client 450
=> Check and maintain the SLD content for the current client
Summary: Connection to SLD works technically, but the SLD content may need maintenance
=> Check and maintain the SLD data content
*Unable to refresh cache contents.Error during last attempt to refresh cache" * this error is related with the RFC destination type HTTP. ( HTTP destination: INTEGRATION_DIRECTORY_HMI: do a test connection: result=500) -
HTTP Response code 404 - RFC Adapter des not connect to Integration engine
Hi,
I seem to have problem with XI Integration engine. My integration process does not go beyond adapter engine and it fails with the following error,
Begining of the erorr report -
2006-01-23 13:35:53 Success RFC adapter received sRFC for ZSCEN2_XI from <sysno>/<client>. Attempting to send message synchronously
2006-01-23 13:35:54 Success Application attempting to send an XI message synchronously using connection AFW.
2006-01-23 13:35:55 Success Trying to put the message into the call queue.
2006-01-23 13:35:55 Success Message successfully put into the queue.
2006-01-23 13:35:55 Success The message was successfully retrieved from the call queue.
2006-01-23 13:35:55 Success The message status set to DLNG.
2006-01-23 13:35:55 Error Returning synchronous error notification to calling application: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error Transmitting the message using connection http://<host>:55300/sap/xi/engine?type=entry failed, due to: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error The message status set to FAIL.
2006-01-23 13:35:55 Error Returning to application. Exception: Received HTTP response code 404 : Not Found
end of error report -
and the runtime workbench does not connect to Integration engine and fails with the following error,
begin error report -
javax.ejb.CreateException: Unable to log on to system XID in language en with user XIRWBUSER
at com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean.ejbCreate(IntegrationEngineMonitoringBean.java:374)
at com.sap.aii.mdt.server.IntegrationEngineHomeImpl10.create(IntegrationEngineHomeImpl10.java:185)
at com.sap.aii.mdt.server.IntegrationEngineHome_Stub.create(IntegrationEngineHome_Stub.java:56)
end of report -
Have anyone experienced the same issue?. Are we missing some post installation configuration?.
Thanks in advance
Regards,
ArulHI Anulraja,
Your Adapter Engine searches the pipeline url of the integration engine from the SLD.
Check the Bussiness System in Sld , which you'll have defined for XI Server.
It should have ROLE : Integration Server And
pipeline url: http://ux0800:55300/sap/xi/engine?type=entry
should be this if your http port is 55300.
Check if this url is right in SLD-Bussiness System.
You can check the exact http port in transaction sxmb_adm.
Go to Integration engine configuration and then click on check icon(F7).
It should match with that provided in the BS in SLD.
By default it should be 8000.
Check all these things and then try.
Regards,
Yomesh
Maybe you are looking for
-
Avoid Printer selection Dialogue box when printing Crystal report in JAVA
Hi i am calling crystal report in my servlet using Report Client Document SDK, now i want to print the report directly to the default printer set without selecting the printer from the select printer dialogue box. In other words want to avoid the sel
-
How can I transfer my contact from old iphone 4 to new iphone 5S
Hi, Please help me out to transfer my contact from my old iphone 4 to new iphone 5S, I could transfer photos only.
-
My home sharing is on both devices but is not sharing to one of them.
I have home sharing set up and on, on my desk top apple and my laptop. any of the purchases I make on my laptop show up to my desk top but not the other way around?
-
Issue with onWithForcePPR and components state
Hi all! I have panelGroupLayout on my template, clientComponent="true", in javascript I change visibility, all is ok BUT when I go to other page, based on this template component visibility property is same as on previous page. How I can fix it? My s
-
Image in generated excel report
Hi to all, I am creating an excel report by following the demo in otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html. However I need to include an image to the excel output. Initially, when I made the layout design in excel, I