RWB: System error in INtegration Engine, Adapter engine OK

HI All,
I have an interface converting IDOCS from R/3 into Text files and sending them to Legacy system via XI.
Data is flowing correctly, however I can see some errors in the RWB. (SXI_MONITOR is clean, no errors)
Upon investigation, I found that its has transmitted the file correctly, however this INtegration system error is shown.
To explain further:
BUssiness syst name of R/3 = BS_R/3
Bussiness syst name of legacy = BS_LEGACY
Bussiness service used = BS_SERV_R3
Message INterface = MIIA_R/3
So in RWB:
Message from BS_R3 to BS_LEGACY are SUCCSSFUL (Adapter and Integration engine , both success)
Message from BS_SERV_R3 to MIIA_R/3 (Adapter engine Sucess but INtegration engine = System Error)
Is it that the messages are going fine and the acknowledgements are failing or something like that.
Appreciate your guidance on same.
Many thanks
Shirin

Hi Shirin
I got a confusion understanding above
Scenario is IDOC R/3 -> PI -> Text Files -> PI -> Legacy system ?
if you have BS_SERV_R3 to MIIA_R/3 implemented for acknowledgments then definitely thats the error. But please share how you are getting ACK to understand and resolve error.
Thanks
Gaurav

Similar Messages

Error in integration Engine(indicating red color)

Hi all,
I am getting error in integration engine monitoring it shows red in color.
In that below PING status its telling like Unable to log on to system with PIRWBUSER.
Post installation has done in 001 client by default.the user is also existijng in that client its a service user.Anyone can help me out to resolve this issue.
Regards
Vijay Kumar G

Please check if the system XXX exists user PIRWBUSER.
Check the exchange profile properly configured or not and also check for the Authorizations for the said user.
See the below links also
Demo application: "You cannot log on to system .... with user XIRWBUSER
RWB error: javax.ejb.CreateException XIRWBUSER cannot log
How to get rid of the error message on RWB?

Registration of Business system for the Integration Engine Java in the SLD issue

Hi,
We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
- Configuration Wizard: PI-AEX initial setup
- Configuration Wizard: PI Self Test for AEX
However when we were Checking the AEX Configuration as per help.sap.com
Check the registration of a business system for the Integration Engine Java in the SLD:
    Enter https://<host>:<port>/sld .
    Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
    The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
More information: SAP Note 1435392
for us the Pipeline URL is as below
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
and the rest " ?ximessage=true " is not there.
Also we ran the below wizard
Configuration Wizard: PI Self Test for AEX
and it finished successfully without any issue.
Any Suggestions what could be missing.
Thanks,
Regard
Ahmed Mohammed

Hi,
I found the below SAPNOTE which confirms that the Pipeline URL should be
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
However on help.sap.com it is different.
Any one experienced the same ?
Regards
Ahmed Mohammed

Proxy Runtime errors in Integration Engines at RWB

Hi Experts,
We have configured the point to point configuration scenario in our landscape. I have two ABAP systems exchanges data using PI. I have configured both the ABAP systems as Application Systems and Corresponding Integration server as my PI system.
In RWB of PI I can see both these systems as proxy run time under Integration Engines, but are in error status.
Path to the same is Component Monitoring>Components>Integration Engines (here I can my systems as Proxy Runtime BSAB200, Proxy Runtime BSID200).
When run the test got the below error.
Can the SLD be reached? RFC destination LCRSAPRFC does not exist
Does the Integration Engine know the business system?
Are roles in SXMS_CONF_ITEMS and SLD consistent?
Why do we need to create the RFC destination again when we select the related integration server as PI.
Can any one throw some light whey are these errors are occured.
Thanks,
Chinna

Can the SLD be reached? RFC destination LCRSAPRFC does not exist
Reached to SLD but not to exchange profile.
Does the Integration Engine know the business system?
Yes.
Why do we need to create the RFC destination again when we select the related integration server as PI.
A central SLD scenario involves a central SLD, but not a central exchange profile.
The exchange profile used is always the one on the Integration Server the
application system connects to the exchange profile using the SM59 destination
LCRSAPRFC.
Regards
Pothana

Error in integration engine prosessing

Hi
I am doing proxy to fille interface for testing purpose in RWB in integration engine i test message tab i have given proper entries and send the message.In SXMB_MONI intially status of flag is green i have registered the queues in sxmb_adm then status has changed to red i opened the message it is showing as follow.
In Moni in place of receiver service interface it is showing sender service interface.But i have configured correctly
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>SI_PROXY_SENDER</SAP:P2>
<SAP:P3>urn:SESA:PROXY:FILE</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message SI_PROXY_SENDER, request message, namespace urn:SESA:PROXY:FILE)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards
Praveen

My problem was solved my R3 RFC destination was not pointing to client of integration engine.I have corrected the same my issue was solved
Regards
Praveen

Error in integration Engine

Hi All,
In integration Engine im getting error as "Exception occurred during XSLT mapping of the application".
when i tried to test the mapping its showing the warning as "javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: Could not execute operation on Java Object. -> java.lang.reflect.InvocationTargetException at "
Please help me reagrding this issue to proceed further!!!

Hi,
Can u please explain the problem little detail...
Are u getting this error in SXMB_MONI??
If yes then can u copy the source payload and check it in the Message Mapping once??
If problem is coming from mapping... try to analyze.. else u can put now vtz exactly the prblm is..
Babu

RWB (System error) recognization

Hi,
We have got system error in RWB for particualr Interface. Is there anything like if system error or any error comes in RWB for interfaces so that automatically we can notify as like alerts.

Yes,
You can create the alert for particular interface.
Once you create the alert category you can create the rule for particular interface in RWB.
Check
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154?QuickLink=index&overridelayout=true
Regards,
Venkata Ramesh

System error while calling webservice adapter

Hello Experts
I am configuring a synchronous proxy to webservice scenario.I have created a webservice from a custom function module. while executing the interface i am getting the following error in the sxmb_moni.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>System error while calling Web service adapter: Error when initializing SOAP client application: 'error_text'</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

ya I have checked the wsdl and even called the wsdl using Altova XmlSpy and getting back the response.Could anyone please throw light on this.
thanks
sabyasachi

XI Error in Integration Directory adapter list is not display.

Hi All,
We are getting following error message while creating communication channels in Integration directory. More over we have attached error log file with this message.
ERROR :-
u2022     Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://xxxxx:50000/rep/query/int?container=any" with user "PIDIRUSER". Response code is 503, response message is "Service Unavailable" (HCX_COMMUNICATION_ERROR)
Apart from this if we try to refresh the xi cache with T-code SXI_CACHE it show the following error. For same I have already checked the Troubleshooting Guide for How To handle Caches in SAP XI and found every thing is ok.
ERROR :-
com.sap.aii.ib.server.abapcache.CacheRefreshException: Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://xxxxx:50000/rep/hmi_service_swc_manager/int?container=any" with user "PIDIRUSER". Response code is 503, response message is "Service Unavailable"
     at com.sap.aii.ibdir.server.abapcache.content.CacheSwc.addContent(CacheSwc.java:63)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:360)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:324)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:145)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:103)
     at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.setXmlDataAndBufferSize(CacheRefreshSession.java:121)
     at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.<init>(CacheRefreshSession.java:40)
     at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.getInstance(CacheRefreshSession.java:54)
     at com.sap.aii.ibdir.web.abapcache.CacheRefreshServlet.doGet(CacheRefreshServlet.java:45)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
So please guide us to solve the above mention problem.
Thanks,
Harshal

Hi...
Contact your basis team .
Regards,
Leela

Cancel System Error Messages from RWB

Hi All,
I have nearly 3000 messages those were got System Error in Integration Engine process, but when i check messages in SXMB_MONI all are success and written to target folders also.There is no problem absolutely.
Now i just want to cancel those System Error messages from RWB--Message Monitor to keep system green and do not want to see those system error messages again.
Iam not able to cancel those messages from RWM, it is saying that User and pwd incorrect but iam providing correct one only.
I went to details of that system error message from Message Monitor, i took message id and filtered with that in SXMB_MONI. i got the message with error state.Iam able to cancel that from MONI but not from RWB which is fine and disappearing from RWB list.
the thing is i can't copy each and every message id by opening details button for every message
How can i proceed for this. please advice me
REgards

Hi Ravi,
For example iam able to see system error message in RWB--Message Monitor under Integration Engine at 9:30
when i execute SXMB_MONI for the same time and see, there is no error message for that able to see success.
When i took message id from RWB--message monitor and filter that in MONI means it is showing me the error message.
I can able to cancel it from MONI which is fine. but this way i have 3000 messages in RWB--Message monitor under IE.
How to copy and paste then filter those error messages in MONI???this is pain process to copy each and every one by one
Iam not able to get those if i filter with the status group as System Error manual Restart Possible criteria
Regards

Error Type In Integration Engine

Hi All,
Please tell me what type of error/exception can occur in the integration engine? Is it only System Exception that can occur or can Application Exception also occur?
Also please tell me what do you mean by the term SALERT.
Thanks,
Abhishek.

hi abhishek,
I. Errors in Integration Engine
a) qRFC Errors
Often in asynchronous scenarios where inbound queues are used, the queues are set to SYSFAIL status and all the messages in the inbound queue are stuck (not processed). Depending on the status of XI processing queues, we can reset a queueu2019s status and trigger processing of messages.
Manual Resend of messages: Use transaction SMQR or SMQ2 to reset the status of queues. As you can see in the following figure, the queue has been marked with a status sysfail.
To be able to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1
For automatic qRfc failure recovery, schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues.
b) tRFC Errors
Like qRFC errors one can either manually or automatically initiated processing of messages hanged tRFC calls.
Manual Resend of messages: Use transaction SM58 and check through the list. If necessary, start hanging tRFC calls
under the Edit menu by choosing Execute LUWs.
For automatic tRfC failure recover, schedule the report RSARFCEX for periodic execution.
II. Errors in Adapter Engine
Till now we have seen how to resubmit/restart message that failed in Integration Engine. One a message makes it from Integration Engine to Adapter Engine, the message is flagged as checked in Integration Engine. The status of the message in Adapter engine does not effect the processed state in Integration Engine. Now if this message was asynchronous, XI will by default try to restart the message 3 times at intervals of 5 minutes before the status of the message is changed from Waiting to System Error .
regards
kummari

Communication error when sending PI message from Integration Engine to AE

Hi Experts,
we currently installed and configured PI 7.3 system. Even I run post installation PI configuration several times, we are still facing error when Integration engine sends message to messaging system. ( my scenario: I send test message to IE directly, avoiding AE )...
It might look easy: but even adding PIISUSER full authorization and system restart, the result is the same. I don't know if it could have connection but I also get HTTP 200 instead of HTTP 500 when testing INTEGRATION_DIRECTORY_HMI destination.
Thanks for any help.
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx:xxxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSER</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2948</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="1" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>

Hi,
So this password change in Exchange Profile + su01 transaction + system restart didn't help.
I increase trace level, and this is even more detailed log in pipeline step Call Adapter.
We also find out that when message arrive to IE we have in java log three entries:
LOGIN.FAILED
User: N/A
IP Address: xxx
Authentication Stack: sap.com/com.sap.aii.af.ms.app*MessagingSystem
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule    SUFFICIENT ok          exception             true       Received no SAP Authentication Assertion Ticket.
2. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false                 true
3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
This log is logged under J2EE_GUEST User.
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
LOGIN.OK
User: SLD_CL_PIQ
IP Address: xxx
Authentication Stack: sap.com/com.sap.lcr*sld
Last two logs are logged by SLD_CL_PIQ user.
Thanks for any help!

- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
- 
<Trace level="2" type="T">no values in cache (no lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="2" type="T">no values in cache (lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="2" type="T">Adapter Framework(s) found</Trace>
<Trace level="2" type="T">Service Port(s) found - take first one</Trace>
<Trace level="2" type="T">URL found</Trace>
<Trace level="1" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="1" type="T">URL = http://xxx/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="1" type="T">User = PIISUSERA</Trace>
<Trace level="1" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="1" type="T">Security: Basic authentication</Trace>
<Trace level="1" type="T">Serializing message object...</Trace>
<Trace level="1" type="T">Tuning - AFW_MAXREQUESTCONTENTLENGTH 2000000000</Trace>
<Trace level="1" type="T">HTTP Multipart document length: 2941</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="1" type="T">Timeout: 0</Trace>
<Trace level="1" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="1" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="1" type="T">HTTP-client: status code = 401</Trace>
<Trace level="3" type="System_Error">Authorization error while sending by HTTP (error code: 401 , error text: Unauthorized)</Trace>
</Trace>
</Trace>

Integration engine failure

hi..
in my RWB in component monitoring integration engine status is red.
how can i resolve that.
please help me this regard.
thanks and regads,
krushi

Hi..
refer this thread..
Integration Engine RED in Component Monitoring
In my Component monitoring i got this error for Adapter engine status.
Error: System not configured as Integration Engine
Might help you..
vasanth

Internal system error 500 in Adapter call

Hi Guys,
I am processing the following scenario in XI
File -> XI -> SAP R/3
User place the data file in a directory, XI process the file and call a RFC FM in R/3.
After successful processing, file will be moved to Archive directory.
I am getting an error - Internal system error 500 in Call Adapter section in the Monitoring screen.
I enable the XI service in SICF.
SLDCHECK returns 4, even though it opens the SLD page.
Any other configuration steps need to be checked to make sure other system are connected.
How to restart the process again.
Thanks
Senthil

Hi,
I have done the following configuration checks.
XI service has been activated in SICF
RFC Connections are working.
TCP/IP - LCRSAPRFC & SAPSLDAPI
HTTP Connections u2013 XIHUB
SLD integration settings using SLDAPICUST is correct.
SLD update settings using RZ70 is set.
SLDCHECK from XI is working.
SLDCHECK from SAP is failed.
Anything else I need to check or set.
Cheers
Senthil

CCMS monitoring of SRM's own XI integration engine

I have CCMS problems when monitoring XI integration engine of a SRM system. The integration engine will not appear in CCMS. I opened a question on SRM solution forum, could somebody have a look at it there. Here is the link to original question and earn your points there:
CCMS monitoring of SRM's own XI integration engine
background: I have previously managed to successfully set up CCMS monitoring for a plain XI system, but there seem to be some difference while SRM's XI only has integration engine and not J2EE engine running. SRM XI Integration engine is in place due to ABAP Proxies used by SRM.
best regards,
Kimmo

You have to follow the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=00200682500000002442&_EVENT=DISPLAY&_OBJECT=012006153200000552232003&_NNUM=634771&_NLANG=EN">634771</a>
and following this document <a href="https://websmp110.sap-ag.de/~sapdownload/011000358700004422742005E/XIMonitoringHowTo_01aSR.pdf">How To Monitor Exchange Infrastructure 3.0</a> pay attention to page 34, for the use of a Central Monitoring (CEN) System.
Of course you have to adjust the GRMG in order to have only the ABAP part under monitor.
Best Regards

RWB: System error in INtegration Engine, Adapter engine OK

Similar Messages

Maybe you are looking for