Integration Gateway External System Contact Error

Hi,
I have to use Integration Broker to Build an inbound interface and to integrate Inventory with Third Party system. It is an ASynchronous Service Operation.
I am using the PSFT_EP as local node for Peoplesoft and I have created an External node and used the HTTPTARGET as the connector for that external
But the ping node is failed for the external node. The error is Integration Gateway External System Contact Error 158,10721. When I copy the URL present in the HTTPTARGET connector and open it in the new tab. The message I am getting is "ACTIVE"
Edited by: 1010088 on Jun 5, 2013 3:00 PM

Please review following notes on MOS:
E-IB:Unable to ping node external server External System Contact Error [ID 637183.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=637183.1
Integration Broker: Cannot ping external node [ID 622030.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=622030.1

Similar Messages

Webservice: Gateway external system contact error

Hi -
I am in the process of building an outbound interface using webservices (8.48). I am able to ping local and external nodes successfully, but I am receiving an error when i save the data from the page. (Peoplecode has been written on SavePostChange %Intbroker.syncrequest(&msg)). Any idea what I am missing in the setup?
Thanks, Shri

Could you paste the URL on the forum...I hope the setups - SvOps/Service/Messages have been defined correctly...

External system Contact Error

Hi,
I am getting the following Error.
HttpTargetConnector:ExternalApplicationException. HttpStatusCode returned:500.
External System responded with an error status. looking for a solution for the same

Ok I'm going to ask some more questions now so I can help to track your problem :)
- What tools release are you using?
- How are you consuming the third-party webservice? (UDDI, WSDL-URL, WSIL-URL or file)
- Is your Webserver behind a firewall or a proxy?
- Depending on how you consume the webservice; do you get a page/file when opening the URL in your browser?
PeopleSoft automatically detects if a webservice is synchronous or asynchronous depending on the amount of port types in the details of the WSDL (if this is infact what you're using).

Attendance recording integration with external system

Hi,
there is a scenario where an employee punches in and out to enter and leave his office. This information like employee number, date, mode(in/out) etc is collected in a flat file. How this information can be captured in R/3? Do we need IDOC or XI or both or BAPI? kindly respond.
Regards,
Murali.

Hi,
You have to maintain Infotype 0050 and to upload the information you can use BDC or any other interface ( time in time outs will be writtten to the table CCITYEV and after processing will be stored in TEVEN table.)
You need an ABAP program that can transfer data from third party systen to R/3. This is the simplest way. Without XI we can integrate the system.
This can be done in so many ways .
Warm Regards,
Kapil Kaushal

Error while connecting to Integration Gateway in Eclipse Junos

Hi Experts,
I am getting error while setting up Integration Gateway settings.
sending request to server failed reason: error during processing request on client
I am able to open Admin cockpit, gateway cockpit with same user and password. There is no information in log file also E:\SAP\MobilePlatform3\Server\log
What could be the possible reason?
Rgrds,
JK
Tags edited by: Michael Appleby

Hi Marvin,
Appreciated your help.
While checking the connection to SMP server from the Integration Gateway, i got this error.
And i also i checked the Error log but not able to resolve this issue.
!ENTRY com.sap.it.commons.command.eclipsechannel 4 0 2014-06-05 09:42:13.859
!MESSAGE Error during processing request on client.
!STACK 0
com.sap.it.commons.command.CommandProcessingException: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
at com.sap.it.commons.command.http.apacheclient.BackendCommandDispatcherApache.executeRequest(BackendCommandDispatcherApache.java:401)
at com.sap.it.commons.command.http.apacheclient.BackendCommandDispatcherApache.process(BackendCommandDispatcherApache.java:263)
at com.sap.it.commons.command.SynchronousProcessorBase.process(SynchronousProcessorBase.java:24)
at com.sap.it.commons.command.eclipsechannel.simplepref.controls.HttpServerConnection$2.run(HttpServerConnection.java:206)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at com.sap.it.commons.command.eclipsechannel.simplepref.controls.HttpServerConnection.testConnection(HttpServerConnection.java:203)
at com.sap.it.commons.command.eclipsechannel.simplepref.controls.HttpServerConnectionPreferencePage.testConnection(HttpServerConnectionPreferencePage.java:133)
at com.sap.it.commons.command.eclipsechannel.simplepref.controls.HttpServerConnectionPreferencePage.access$1(HttpServerConnectionPreferencePage.java:128)
at com.sap.it.commons.command.eclipsechannel.simplepref.controls.HttpServerConnectionPreferencePage$2.widgetSelected(HttpServerConnectionPreferencePage.java:108)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:248)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1053)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4169)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3758)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at org.eclipse.ui.internal.dialogs.WorkbenchPreferenceDialog.open(WorkbenchPreferenceDialog.java:215)
at org.eclipse.ui.internal.OpenPreferencesAction.run(OpenPreferencesAction.java:65)
at org.eclipse.jface.action.Action.runWithEvent(Action.java:498)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:584)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1053)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4169)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3758)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine$9.run(PartRenderingEngine.java:1053)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.run(PartRenderingEngine.java:942)
at org.eclipse.e4.ui.internal.workbench.E4Workbench.createAndRunUI(E4Workbench.java:86)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:588)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:543)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:124)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:353)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:629)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:584)
at org.eclipse.equinox.launcher.Main.run(Main.java:1438)
at org.eclipse.equinox.launcher.Main.main(Main.java:1414)
Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
at com.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificates(Unknown Source)
at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:126)
at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:437)
at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:180)
at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:151)
at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:125)
at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:643)
at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:479)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:906)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:805)
at com.sap.it.commons.command.http.apacheclient.BackendCommandDispatcherApache.executeRequest(BackendCommandDispatcherApache.java:359)
... 47 more
Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
at com.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificates(Unknown Source)
What this error says exactly?
but if some port (maybe 8080) is blocked the SMP3 installation setup will automatically suggest you other (free) ports.
While SMP3 server installation, i came across this pop-up, are you talking about this one?
Rgrds,
JK

Error while connecting to external system in SM59 with ICM_HTTP_SSL_ERROR

Hi all,
we have configured an SM59 RFC destination of G type which pings to the external third party server. Before testing we have uploaded the external server certificate in PI system. it was working fine with * HTTP 200 OK* message. since 2 days we are facing the ICM_HTTP_SSL_ERROR while testing the connection. when we telnet from PI to the external system using the port no.443, its getting connected.
so any idea why it started giving the error.
We have check out this forums but of no help.
[ICM_HTTP_SSL_ERROR|ICM_HTTP_SSL_ERROR;
The trace file dev_icm says
[Thr 52] Thu Jan 20 14:34:00 2011
[Thr 52] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_CONNECTION_LOST
[Thr 52]    session uses PSE file "/usr/sap/XD1/DVEBMGS00/sec/SAPSSLDRV.pse"
[Thr 52] No Secude Error present in trace stack!
[Thr 52]   SSL_get_state() returned 0x00002141 "SSLv3 read server key exchange B"
[Thr 52]   SSL NI-sock: local=192.168.127.70:65243 peer=80.78.2.187:443
[Thr 52] <<- ERROR: SapSSLSessionStart(sssl_hdl=6000000000d50fd0)==SSSLERR_SSL_CONNECT
[Thr 52] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00370a03} [icxxconn_mt.c 1957]
[Thr 81] Thu Jan 20 14:34:15 2011
[Thr 81] IcmWorkerThread: end worker thread 53
[Thr 80] Thu Jan 20 14:44:45 2011
[Thr 80] IcmWorkerThread: end worker thread 52
Thanks,
Asem

Hareen,
We checked the the note 1318906 and followed the steps but error persists.
Could you please advice more on this.
Rahul,
The note you mentioned is for different error "ICM_HTTP_INTERNAL_ERROR".
Br
Asem

Error when connecting an oracle DB with Integration gateway

I followed the steps from the blog How to connect an Oracle DB with Integration Gateway in SMP3 and the ojdbc was deployed successfully to SMP. Still, i'm getting "Driver class oracle.jdbc.driver.OracleDriver not found" error message when i try to test my connection. The first difference i saw when completing these steps was that I'm using SMP3 SP05, could this be the issue?

Joao D Franco Net
Could you share below information:
Can you cross check if deployed driver are OSGi enabled? Refer this.
Can you share screenshot of the destination settings and error ?
note: The blog you followed is referring to SP03 (1st GA of SMP3)..You should not have any problem in connecting to Oracle DB being on any SP.
Regards,
JK

External system returned different number of lines than received error

Hi,
While posting invoice in MIRO,i am getting the following error,
"External system returned different number of lines than received"
Please help in resolving this error.
Thanks
Srini

Hi,
Can you please check this sap note..
Note 1499319 - Ext system returned different number of lines than received
Regards

Workflow integration with external DMS system

Hi,
What integration/control transfer possibilities exist between SAP Workflow and an external document management system (e.g. Hummingbird)? Would some sort of interface be necessary for the integration and what would the level of effort be more or less?
This is quite urgent and I would greatly appreciate your input.
Regards
Liza-Marie

Hi Liza-Marie,
you can work at different levels:
1) Integration of documents use in the SAP workflow can be stored in external DMS and linked to SAP transactions through SAP Archivelink; you'll probably need a Hummingbird interface certified archivelink
2) If you want to integrate your SAP workflow with the workflow of the DMS (if any), you can practice as follows:
a) From you DMS, you can raise events in the SAP system on which your SAP workflow would react (to start or resume) by making use of standard RFCs such as SWE_EVENT_CREATE; eventually you can expose it as web service, which will simplify the call
b) From SAP worfklow, you can send mails, call external system commands (more rarely used) or call web services that would allow you external DMS to be triggered on
Details on all these techniques would be too huge to be described in a post, but this gives you an overview on how SAP Workflow can interact with external solutions.
In summary to your question:
1) Interface required YES - ARCHIVELINK CERTIFIED in case you want to store documents in external DSM that need to be connected to your SAP transactions
2) Level of effort is depending on your scenario
Rgds,
Karim

Integration between SAP server & External System

Dear all,
would you explain the pros and cons of integration between SAP and external system. what types issue i can face on SAP and external system respectively.
regards,
diya

Hi,
I don't know what is a COSMOS system and I don't know your company....
You will never get meaningful answers on an internet forum for questions so dependent on your specific environement and requirements. If you know your ECC6 system, then read the COSMOS documentation and ask the COSMOS vendor.
Regards,
Olivier

RCIRAS0274 - Contact system admin error

Hello to all,
I am trying to open some of the canned reports in the infoview but sometimes i get this error <b>"<i>RCIRAS0274 - Contact system admin error</i></b>". If i try couple of times the same report opens again. So not sure what is causing to throwing in this error every once in a while.
The reports are builit in Crystal Reports 2008 (version 12) and we are using BOXI 3.1 sp2. So has anyone faced this issue and know the solution to this problem.

What OS is BOE on? Also, are you able to schedule reports?
Also, this is in the wrong forum. You'd be better served posting this in the [SAP BusinessObjects Enterprise/Edge, and SAP Crystal Reports Server Administration|BI Platform; forum.

Communication error with external system ( VERTEX )

Hi Folks,
While creation the Credit memo request or Sales order /invoice system giving the error message " COmmunication error with external system ( VERTEX ) " and stopping to proceed further and even not able to post the accounting document.
Please help me out here.
Answers will be appreciated and rewared.
Regards,
Ram.

Hi,
check this below thread
Communication error with the external tax system (VERTEX_MS0018)
OR
Remove V from the Extrernal System at the location IMG->financial Accounting->Financial Accounting Global Settings->Tax on Sales/Purchases->Basic Settings->External Tax Calculation->Activate External Tax Calculation
Reg,
JJ
Edited by: Jagsap on Mar 5, 2010 1:15 PM

Siebel UCM (OCH) is overwriting the Contact changes done by external system

Hi All,
We are using UCM for Contact data management. One external system is updating Contact data in UCM through inbound WS. But in Logs, we observed that first it is updating Contact data with values from external system but secondly it is automatically calling UCM Survivorship Engine (Method: IntelligentMerge) BS and updating Contact to old values again. Due to this, it is overwriting the changes done by external system and retaining the original contact values.
We are using "PersonService" web service to update Contact. Also we are using Contact default Survivorship Rules with default criteria as "External" and created our own BS to update it.
Please let me know, how should I stop UCM from overwriting my changes.
Best Regards,
Sandesh

Hey Wilson,
Thanks for your reply.
We are aware of survivorship rules. We have defined our own survivorship rules with Default Criteria is "External". In that, we mentioned the name and method of BS. But somehow our changes are getting override by UCM. We have gone through logs, it is writing our changes and later calling BS: UCM Survivorship Engine, Method: IntelligentMerge, which is overwriting our changes.
Thanks,
Sandesh
Edited by: Sandesh Ghatkar on Mar 11, 2013 12:05 AM

Integration of Financials with external systems

Hi,
I am strugling with an implementation where the client is not sure if Oracle Financials suits his business processes
Overview of situation on Hand:
We do not have the product installed as yet at the client site
Products of Oracle Financials to be used :General Ledger, Account Receivable, Account Payable, Fixed Assets,India Localization Patch
Products of Oracle Applications NOT available for use :
Purchasing, Inventory, Order Management
(All these areas are being covered by developing a customized Bespoke system)
1.     Is it possible to use Oracle India Localizations (with regards to the excise functionality, for e.g. claiming of ModVat, the various excise registers that are to be maintained for e.g. RG23 A, RG23C,etc ) in the above situation (without implementing Purchasing, Inventory, and Order Management?).
2.     Further, while passing the Vendor’s Bills (in Oracle Payables), one of the criteria for PO Matching is to check if the ModVat has been claimed. Is this functionality available in Payables with the India localization patch?
3.     Does Oracle India localization cater for VAT requirements?
4.     Is an Open Interface available to transfer Purchase Order data from external systems to Oracle Purchasing tables (which are shared by Oracle Payables the names being PO_HEADERS, PO_LINES, PO_LINES_LOCATIONS, PO_DISTRIBUTIONS, PO_DISTRIBUTIONS_AP_V (VIEW OF PO_DISTRIBUTIONS), PO_RELEASES (Blanket Purchase Orders), PO_LOOKUP_CODES) at transactional frequency? However, if the oracle purchasing module is not being used, can the interface tables of Purchasing be used?
5.     An open interface (Payables Open Interface) is available in Oracle Payables to import the Invoices from external systems. While importing these invoices, does the system expect to have the Purchase Order data in the PO tables mentioned in the point above?
6.     Is an Open Interface available to transfer Quantity Received/Accepted data from external systems to PO_line_locations table to enable carrying out of 2/3/4 way matching of Purchase orders with invoices? Can the 4 way mathcing be carried out in AP by just importing Purchase Order data??
7.     Can the Credit Card Transaction Interface be used for uploading employee expenses / advances settlement (not carried out via credit card) directly from feeder system?
8.     Is it possible to use Open Item interface (including import concurrent program) even though Inventory module is not being installed ? If yes, then we would like to use this interface for updating Item master from bespoke system..
9.     Can Auto Invoice API be used to import invoices from feeder system / legacy system (via RA interface Tables) into the Oracle receivable invoice tables? Is order number as column a prerequisite for successful completion of Auto Invoice API?
10. Where should the Masters be kept....OF of Bespoke
eg. Employee master, Inventory Item Master etc.
11. What is the best strategy for keeping the data in Bepoke and OF related to Masters in sync?
I have got various answers to these questions .....but some seem to contradict each other.
PLEASE HELP!!
Thanks,
Kamana

Dear Kamana,
Can you send me the replies given by our other Forum Friends, let me analyze the entire stuff and get back to you with a single consolidated bible for all your questions.
Gopal

Integration between an external system and SAP OM

Hi everybody,
I need to integrate an external system with SAP OM, and I would like to know how to do it (idoc? BAPI? other?)
What we need is the following:
1. External system -
> extraction of data changes (Cost center, positions, jobs changes) to an excel file
2. Excel validated by HR administrator
3. Validation of this file -
> creates an Idoc (how do you create it?)
4. This Idoc feeds SAP OM
Regards, and thanks in advance for your answer.
Angie

Hi Pradeep,
Thanks for your answer!
I am fresh in this area of SAP, and I still have questions...
What are the BAPI and Objects to use in this case? (I can't find any for OM)
Thanks again for your enlightenment.
Angie

Integration Gateway External System Contact Error

Similar Messages

Maybe you are looking for