Webservice: Gateway external system contact error

Hi -
I am in the process of building an outbound interface using webservices (8.48). I am able to ping local and external nodes successfully, but I am receiving an error when i save the data from the page. (Peoplecode has been written on SavePostChange %Intbroker.syncrequest(&msg)). Any idea what I am missing in the setup?
Thanks, Shri

Could you paste the URL on the forum...I hope the setups - SvOps/Service/Messages have been defined correctly...

Similar Messages

Integration Gateway External System Contact Error

Hi,
I have to use Integration Broker to Build an inbound interface and to integrate Inventory with Third Party system. It is an ASynchronous Service Operation.
I am using the PSFT_EP as local node for Peoplesoft and I have created an External node and used the HTTPTARGET as the connector for that external
But the ping node is failed for the external node. The error is Integration Gateway External System Contact Error 158,10721. When I copy the URL present in the HTTPTARGET connector and open it in the new tab. The message I am getting is "ACTIVE"
Edited by: 1010088 on Jun 5, 2013 3:00 PM

Please review following notes on MOS:
E-IB:Unable to ping node external server External System Contact Error [ID 637183.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=637183.1
Integration Broker: Cannot ping external node [ID 622030.1]
https://support.oracle.com/epmos/faces/DocContentDisplay?id=622030.1

External system Contact Error

Hi,
I am getting the following Error.
HttpTargetConnector:ExternalApplicationException. HttpStatusCode returned:500.
External System responded with an error status. looking for a solution for the same

Ok I'm going to ask some more questions now so I can help to track your problem :)
- What tools release are you using?
- How are you consuming the third-party webservice? (UDDI, WSDL-URL, WSIL-URL or file)
- Is your Webserver behind a firewall or a proxy?
- Depending on how you consume the webservice; do you get a page/file when opening the URL in your browser?
PeopleSoft automatically detects if a webservice is synchronous or asynchronous depending on the amount of port types in the details of the WSDL (if this is infact what you're using).

Call XI webservice from external system

I found this WSDL in XI. How can I use that from an external system to call the BAPI routine?
see <a href="http://www.janjoker.nl/GE/scrdump.jpg">screen print</a>

Hi,
please go thru the link below and see if u have followed the steps mentioned in it while defining the web service. if it still doesnt help you, please do give a little more detail about the scenario you are doing...
http://help.sap.com/saphelp_erp2004/helpdata/en/31/daa0404dd52b54e10000000a1550b0/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/54/048d40e802ce62e10000000a155106/frameset.htm
You can create SOAP Request from WSDL using the following tool.
http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
You've to expose your outbound message interface as a WSDL which can be used by say EP.
Also go thru the following threads
Re: WebService
Re: SOAP Client for Synchronous Scenario
Re: How to test a webservice as a standalone?
In any B2B scenario, you're going to have stricter security requirements. XI and other SAP applications in the vast majority of cases reside within the internal network of a company, as I'm sure it does for your company A. It is recommended to have some kind of reverse proxy/web switch hardware/software residing in the DMZ to intercept the external request. Direct requests (especially HTTP) by most, if not all, companies will not be allowed to freely pass to applications within a company's intranet.
SAP has something called the Web Dispatcher that is commonly used for such a purpose. You can find more info on it at the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/42/5cfd3b0e59774ee10000000a114084/frameset.htm
You'll also find some visuals and more security related topics at the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/ef2940cbf2195de10000000a1550b0/frameset.htm
In addition, you'll probably require a more secure transport protocol like HTTPS/SSL as well.
Regards,
Abhy

Best practicies exposing AM (OAF 11.5.10) as webservice to external systems

IHAC how is developing extensions to there ebusiness install base using OAF 11.5.10 and they have approached me with questions on how they could expose some of the business services developed (AM VO mainly) as webservices to be used in a BPEL/Webservice framework. The BPEL service is seebeyond (not sure how it is spelled) and not Oracle's.
I have outlined 2 ways, but since I have not developed anything on OAF I have no idea it is possible.
First was to migrate the ADF BC (or BC4J) projects from OAF with JDeveloper 10.1.3 and just more or less create a simple facade layer of a session bean right-click and deploy as webservice.
Second: was to use a webservice library such as axis to be used in JServ directly to expose them on the "target" server.
Has anyone any best practicies on this topic,

For recognition and stable functionality of USB devices, your B&W G3 should be running OS 8.6 minimally. The downloadable OS 8.6 Update can be run on systems running OS 8.5/8.5.1. If (after updating to 8.6), your flash drive still isn't recognized, I'd recommend downloading the OS 9.1 Update for the purpose of extracting its newer USB support drivers, using the downloadable utility "TomeViewer." These OS 9.1 USB support files can be extracted directly to your OS 8.6 Extensions folder and are fully compatible with the slightly older OS software. It worked for me, when OS 8.6's USB support files lacked a broad enough database to support my first USB flash drive.

Error while connecting to external system in SM59 with ICM_HTTP_SSL_ERROR

Hi all,
we have configured an SM59 RFC destination of G type which pings to the external third party server. Before testing we have uploaded the external server certificate in PI system. it was working fine with * HTTP 200 OK* message. since 2 days we are facing the ICM_HTTP_SSL_ERROR while testing the connection. when we telnet from PI to the external system using the port no.443, its getting connected.
so any idea why it started giving the error.
We have check out this forums but of no help.
[ICM_HTTP_SSL_ERROR|ICM_HTTP_SSL_ERROR;
The trace file dev_icm says
[Thr 52] Thu Jan 20 14:34:00 2011
[Thr 52] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_CONNECTION_LOST
[Thr 52] session uses PSE file "/usr/sap/XD1/DVEBMGS00/sec/SAPSSLDRV.pse"
[Thr 52] No Secude Error present in trace stack!
[Thr 52] SSL_get_state() returned 0x00002141 "SSLv3 read server key exchange B"
[Thr 52] SSL NI-sock: local=192.168.127.70:65243 peer=80.78.2.187:443
[Thr 52] <<- ERROR: SapSSLSessionStart(sssl_hdl=6000000000d50fd0)==SSSLERR_SSL_CONNECT
[Thr 52] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00370a03} [icxxconn_mt.c 1957]
[Thr 81] Thu Jan 20 14:34:15 2011
[Thr 81] IcmWorkerThread: end worker thread 53
[Thr 80] Thu Jan 20 14:44:45 2011
[Thr 80] IcmWorkerThread: end worker thread 52
Thanks,
Asem

Hareen,
We checked the the note 1318906 and followed the steps but error persists.
Could you please advice more on this.
Rahul,
The note you mentioned is for different error "ICM_HTTP_INTERNAL_ERROR".
Br
Asem

External system returned different number of lines than received error

Hi,
While posting invoice in MIRO,i am getting the following error,
"External system returned different number of lines than received"
Please help in resolving this error.
Thanks
Srini

Hi,
Can you please check this sap note..
Note 1499319 - Ext system returned different number of lines than received
Regards

Need to call up a webservice created in external system from SAP

Hi folks,
A web service is created in the external system and I need to access this web service from a BADI. Can you tell me how can I call this web service (the external system is giving me a URL) and how to capture the return value from the web service. Please let me know in detail.
Thanks,
Prem

Hi,
I have the same requirement and have created a new Proxy-Object, uploaded the WSDL file (locally) and Created a Logical port.
In the Logical Port under the tab Call Parameter I've defined the URL of the web-service.
Since I was not able to upload the WSDL by selecting the option URL/HTTP Destination due to error message "HTTP error (return code 400, message "ICM_HTTP_CONNECTION_FAILED")
Message no. SPRX090" so uploaded the file locally.
However, when testing the service, I didn't received a sucess message but:
<CX_AI_SYSTEM_FAULT>
<CODECONTEXT>Local</CODECONTEXT>
<CODE> ERROR_WEBSERVICE_RUNTIME_INIT </CODE>
<ERRORTEXT> Error when instantiating the Web service runtime (Error when initializing SOAP client application: ' error_text' ) </ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
What might be the Problem ?
/Manik

RCIRAS0274 - Contact system admin error

Hello to all,
I am trying to open some of the canned reports in the infoview but sometimes i get this error "RCIRAS0274 - Contact system admin error". If i try couple of times the same report opens again. So not sure what is causing to throwing in this error every once in a while.
The reports are builit in Crystal Reports 2008 (version 12) and we are using BOXI 3.1 sp2. So has anyone faced this issue and know the solution to this problem.

What OS is BOE on? Also, are you able to schedule reports?
Also, this is in the wrong forum. You'd be better served posting this in the [SAP BusinessObjects Enterprise/Edge, and SAP Crystal Reports Server Administration|BI Platform; forum.

Communication error with external system ( VERTEX )

Hi Folks,
While creation the Credit memo request or Sales order /invoice system giving the error message " COmmunication error with external system ( VERTEX ) " and stopping to proceed further and even not able to post the accounting document.
Please help me out here.
Answers will be appreciated and rewared.
Regards,
Ram.

Hi,
check this below thread
Communication error with the external tax system (VERTEX_MS0018)
OR
Remove V from the Extrernal System at the location IMG->financial Accounting->Financial Accounting Global Settings->Tax on Sales/Purchases->Basic Settings->External Tax Calculation->Activate External Tax Calculation
Reg,
JJ
Edited by: Jagsap on Mar 5, 2010 1:15 PM

Siebel UCM (OCH) is overwriting the Contact changes done by external system

Hi All,
We are using UCM for Contact data management. One external system is updating Contact data in UCM through inbound WS. But in Logs, we observed that first it is updating Contact data with values from external system but secondly it is automatically calling UCM Survivorship Engine (Method: IntelligentMerge) BS and updating Contact to old values again. Due to this, it is overwriting the changes done by external system and retaining the original contact values.
We are using "PersonService" web service to update Contact. Also we are using Contact default Survivorship Rules with default criteria as "External" and created our own BS to update it.
Please let me know, how should I stop UCM from overwriting my changes.
Best Regards,
Sandesh

Hey Wilson,
Thanks for your reply.
We are aware of survivorship rules. We have defined our own survivorship rules with Default Criteria is "External". In that, we mentioned the name and method of BS. But somehow our changes are getting override by UCM. We have gone through logs, it is writing our changes and later calling BS: UCM Survivorship Engine, Method: IntelligentMerge, which is overwriting our changes.
Thanks,
Sandesh
Edited by: Sandesh Ghatkar on Mar 11, 2013 12:05 AM

Office 365 ECT to Azure Cannot connect to the LobSystem (External System)

I've tried to set up External Content Types to an Azure SQL database but when I access my page I get an error.
I basically followed http://www.pointbeyond.com/2012/12/31/surfacing-data-from-sql-azure-in-sharepoint-2013-online-office-365
Can you help me work out what i've not done, I don't know where to configure Azure firewall as this message suggests. The error is below:
Cannot connect to the LobSystem (External System). Reason: 'Cannot open server 'uf7prto4sj' requested by the login. Client with IP address '157.55.225.241' is not allowed to access the server. To enable access, use the Windows Azure Management
Portal or run sp_set_firewall_rule on the master database to create a firewall rule for this IP address or address range. It may take up to five minutes for this change to take effect. Login failed for user '*REMOVED*'. This session has been assigned a tracing
ID of '9389a67c-dc78-4134-9167-545ec963be3a'. Provide this tracing ID to customer support when you need assistance.'
Correlation ID:9a3fb39c-d0ea-1000-8099-2fad02009a01

Hi,
It depends, if it's a static IP address for your machine, it should be OK for this one IP address; if it is a dynamic IP address in a range, you can input the IP address range which contains this mentioned IP address
157.55.225.241, or update the changed address to date.
http://stackoverflow.com/questions/8543653/windows-azure-client-with-ip-address-xxx-xxx-xxx-xx-is-not-allowed-to-access-t
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you
have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

How do I integrate SAP R/3 with an external system?

Hi there!
I've run into a problem integrating SAP R/3 with an external system. The external system provides a webservice, and when I try to get WSDL file from that service, I am getting asked of authorization and when I authorize, I get error 500. The access is anonymous, as I'm being told. When I try to get just a response, server requests authorization. No matter what login and password I supply, I always get error 401 saying I'm not authorized.
I think the ICF is somewhat misconfigured, but how do I configure it? Or maybe there's a problem with requests I send. I don't know.
Please help!
Regards, Dima

Hi,
You don't provide any info on how you want to cosnume the web service, but pls check things like
/people/thomas.jung3/blog/2005/04/21/webservice-navigator-page-for-abap-and-java
/people/thomas.jung3/blog/2005/04/27/webservice-navigator-page-for-abap-and-java-part-2--abap-unit
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Connecting of an external system by IDOC adapter

Hello everybody,
we want to connect an external (storage) system to XI by IDOC-Adapter.
In a scenario without XI the R/3 backend triggers the external system by RFC-Call (TCPIP-conncetion) and an program on the external system is called. This program executes an RFC-call on the R/3 to get the IDOC-informations.
IN the new scenario (with XI) the R/3 Backend sends the IDOC information to XI. The XI routes this to external system. An TCPIP-Connection is needed which calls the program from the external system.
But how should this work? The program can not (or should not) call the R/3 Backend directly but the XI.
What has to be done now? Has the program of the external system changed so that it can understand IDOC-structure directly?
Or do I have to implement a business process scenario to guarantee that the external system reads the IDOC data in XI (similar to "old" scenario?
Thanks a lot!

HI everybody,
thank you very much for your help. Now it es possible to send an IDOC from R/3 Backend and IDOC-Adapter via XI to an external system using the IDOC-Adapter.
But now the external system wants to send IDOCs back. So the communication is realised by using the IDOC-Adapter again. In this case we do not get the messages in XI. The conncection is ok (we see this in the Gateway), but the system gets an error in IDOC adapter (sys-log):
Transaktions-Abbruch IDOC_ADAPTER 151 ( LFS 910 )LFS = external system (AS400).
In the RFC-Trace we find following information:
 **** Tra
Transaktions-Abbruch IDOC_ADAPTER 151 ( LFS 910 )ce file opened at 20060223 111414 W. Europe Stand, SAP-REL 640,0,109 RFC
======> Der Funktionsbaustein "EDI_FILL_SYIDOC01_FOR_RFC" ist nicht vorhanden
ABAP Programm: SAPLIDX1 (Transaction: )
Called function module: EDI_FILL_SYIDOC01_FOR_RFC
User: RFC_USER (Client: 910)
Destination: C01 (handle: 3, , {C322581B-EB47-43E7-87D7-4607C2873828})
SERVER> RFC Server Session (handle: 1, 95896538, {43FD899F-8993-0202-E100-00000A
SERVER> Caller host: LHMAS40A.INTRANET.SYS
SERVER> Caller transaction code: (Caller Program: SAPCPIC)
SERVER> Called function module: ARFC_DEST_SHIP
Can anybody help us?
Thanks a lot!
Florian

FTP to external system

Hi,
I am try to establish a connection to the external system. I am using the FM "FTP_CONNECT" for connection in my ABAP program. But somehow I am not able to connect.
I am getting an error message saying "Attempting to connect to (HOSTname) fail".
I have checked user authorization and it seems everything is fine.
Do I need to pass gateway parameters in this FM as this is the external system (They are optional)? Currently I am not passing anything in all three gateway information.
CALL FUNCTION 'FTP_CONNECT'
 EXPORTING USER = USER
 PWD = PASSWORD
 ACCT = ACCOUNT HOST = HOST
 TRACE = FTP_TRACE
 GUSER = ''
 GPWD = ''
 GHOST = ''
 IMPORTING HANDLE = HANDLE
 ERROR = CERROR
 EXCEPTIONS SYSTEM_FAILURE = 1
 COMMUNICATION_FAILURE = 2.
Appreciate your early response.
Thanks,
Samay

Hi Samay,
You need to setup RFC Destination (SM59). If you don't have authorization, please ask BASIS to help you. Otherwise please follow this steps.
When you define an RFC server program (usually an executable on a server) as RFC destination, you choose either 'START' or 'Registration'. 'Start' means the SAP application sending anything to this destination will trigger this program, while registration means this program will already be running (like a service) and have already registered itself to SAP server.
Once you have defined your RFC destination as of type 'registration', you should execute this exe with the syntax
"pgmname.exe -a<ProgramID>
-g<Gateway Host>
-x<Gateway Service>
" where programID shall be the same as the RFC destination name (I think) and gateway host and service is from the app server where you are registering this destination,
to have it started as a service and registered as the destination to the SAP server (which you can afterwards see in SMGW txn).
If you want this program to be started when something is sent to this RFC destination from SAP, make it of type 'START'.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Webservice: Gateway external system contact error

Similar Messages

Maybe you are looking for