Integration PP-PM in REM

Hi,
Could you please explain the integration PM with PP (REM).
What's te steps to do it?
What's the points we must to check in SPRO?
What are the pre-requisite?
I want, when i have a maintenance order, the system should not be able to scedule any production order (REM).
It's possible using MF50/MF57.
Thanks in advance.

Hi Omar
PM's main activities are to carry out the Maintanace of various equipments etc that are used for prodcution. And IN REM scenario I see that there will be more of Scheduled maint activities that will happen.
Please go through the documentations on PM so that you can do relevant settings that you may need based on the complexiety of the scenario.
Thanks

Similar Messages

WSUS - EXE Downloads Fail

Server 2012 R2 Datacenter
I just recently got WSUS installed and thought it was working properly - numerous computers have successfully downloaded and installed updates over the past couple weeks. But I've discovered over 60 computers have failed to install the April Malicious
Software Removal Tool - the only update I had set to be automatically approved.
After digging, I found this in the WindowsUpdate.log file on one of the clients:
2015-04-17 09:29:56:356 648 18bc AU # Pending download calls = 1
2015-04-17 09:29:56:356 648 18bc AU <<## SUBMITTED ## AU: Download updates
2015-04-17 09:29:56:356 648 2278 DnldMgr WARNING: BITS job {3D1754F8-5402-4D5E-8C52-DAC29420FD09} failed, updateId = {E81EF184-68D7-4C63-BFBD-2CB133D7E920}.200, hr = 0x80190194, BG_ERROR_CONTEXT = 5
2015-04-17 09:29:56:356 648 2278 DnldMgr Progress failure bytes total = 10052792, bytes transferred = 0
2015-04-17 09:29:56:356 648 18bc AU Successfully wrote event for AU health state:0
2015-04-17 09:29:56:387 648 2278 DnldMgr Failed job file: URL = http://wsus.orgname.org:8530/Content/FE/0778261D05230C920973A626AED374BC531C2FFE.exe, local path = C:\Windows\SoftwareDistribution\Download\9d6385c2ab2e50f5d28d7ba59ad3bf7d\0778261d05230c920973a626aed374bc531c2ffe
2015-04-17 09:29:56:387 648 2278 DnldMgr Error 0x80244019 occurred while downloading update; notifying dependent calls.
2015-04-17 09:29:56:449 648 18bc AU >>## RESUMED ## AU: Download update [UpdateId = {1DE9E76A-4E0B-4EE3-B2B2-CCCD08F4FF59}]
2015-04-17 09:29:56:449 648 18bc AU # WARNING: Download failed, error = 0x80244019
2015-04-17 09:29:56:465 648 27e4 Report REPORT EVENT: {3F3362A8-5CE5-43CE-A598-C6C245109094} 2015-04-17 09:29:56:137-0500 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 1 updates.
2015-04-17 09:29:56:465 648 27e4 Report REPORT EVENT: {3E884BC9-B9C7-4E3E-B501-59A5EEA7C624} 2015-04-17 09:29:56:153-0500 1 156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting client status.
2015-04-17 09:29:56:465 648 27e4 Report REPORT EVENT: {FCDFC1D6-0656-47BA-91A2-3456F1FB369D} 2015-04-17 09:29:56:449-0500 1 161 101 {1DE9E76A-4E0B-4EE3-B2B2-CCCD08F4FF59} 200 80244019 AutomaticUpdates Failure Content Download Error: Download failed.
I attempted to accesshttp://wsus.orgname.org:8530/Content/FE/0778261D05230C920973A626AED374BC531C2FFE.exe through
the browser on that client, which just resulted in a generic 404. SO I went to the server and ran it there....
HTTP Error 404.2 - Not Found
The page you are requesting cannot be served because of the ISAPI and CGI Restriction list settings on the Web server.
Detailed Error Information:
Module
CgiModule
Notification
ExecuteRequestHandler
Handler
CGI-exe
Error Code
0x800704ec
Requested URL
http://localhost:8530/Content/FE/0778261D05230C920973A626AED374BC531C2FFE.exe
Physical Path
D:\WSUS\WsusContent\FE\0778261D05230C920973A626AED374BC531C2FFE.exe
Logon Method
Anonymous
Logon User
Anonymous
I go into IIS and look at the ISAPI and CGI Restrictions, and there's no entry there for CGI-exe. I
found CGI-exe in Handler Mappings, set to Disabled. I enabled it by by selecting it and going to Edit Feature Permissions, then checking
Execute. But that made no difference; I get the same error when accessing that URL, and
it's still not listed in the ISAPI and CGI Restrictions. I went ahead and manually added it... Path %windir%\System32\inetsrv\cgi.dll, Description CGI-exe, Allow checked. No change.
It would seem that something has changed on the server, since this worked before - but I haven't been able to determine what changed. Any suggestions on further troubleshooting? It seems to be IIS related. A coworker had previously attempted
(and failed) to get Systems Center running on this server in the past, I don't know if that might have anything to do with it.

Any chance you can guide me through this? I've enabled it, but it's not telling me anything new.
I'm getting SECURITY_DENIED_BY_CGI_RESTRICTION
C:\Windows\system32>%windir%\system32\inetsrv\appcmd list config -section:isapiC
giRestriction
<system.webServer>
<security>
<isapiCgiRestriction notListedIsapisAllowed="false" notListedCgisAllowed="fa
lse">
<add path="%windir%\Microsoft.NET\Framework64\v2.0.50727\aspnet_isapi.dll"
allowed="true" groupId="ASP.NET v2.0.50727" description="ASP.NET v2.0.50727" />
<add path="%windir%\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" a
llowed="true" groupId="ASP.NET v2.0.50727" description="ASP.NET v2.0.50727" />
<add path="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" a
llowed="true" groupId="ASP.NET v4.0.30319" description="ASP.NET v4.0.30319" />
<add path="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll"
allowed="true" groupId="ASP.NET v4.0.30319" description="ASP.NET v4.0.30319" />
<add path="%windir%\System32\inetsrv\cgi.dll" allowed="true" description="
CGI-exe" />
</isapiCgiRestriction>
</security>
</system.webServer>C:\Windows\system32>%windir%\system32\inetsrv\appcmd list config -section:handle
rs<system.webServer>
<handlers accessPolicy="Read, Execute, Script">
<add name="ISAPI-dll" path="*.dll" verb="*" modules="IsapiModule" resourceType="File" requireAccess="Execute" allowPathInfo="true" />
<add name="AXD-ISAPI-4.0_64bit" path="*.axd" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="PageHandlerFactory-ISAPI-4.0_64bit" path="*.aspx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="SimpleHandlerFactory-ISAPI-4.0_64bit" path="*.ashx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="WebServiceHandlerFactory-ISAPI-4.0_64bit" path="*.asmx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="HttpRemotingHandlerFactory-rem-ISAPI-4.0_64bit" path="*.rem" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="HttpRemotingHandlerFactory-soap-ISAPI-4.0_64bit" path="*.soap" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="aspq-ISAPI-4.0_64bit" path="*.aspq" verb="*" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="cshtm-ISAPI-4.0_64bit" path="*.cshtm" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="cshtml-ISAPI-4.0_64bit" path="*.cshtml" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="vbhtm-ISAPI-4.0_64bit" path="*.vbhtm" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="vbhtml-ISAPI-4.0_64bit" path="*.vbhtml" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="TraceHandler-Integrated-4.0" path="trace.axd" verb="GET,HEAD,POST,DEBUG" type="System.Web.Handlers.TraceHandler" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="WebAdminHandler-Integrated-4.0" path="WebAdmin.axd" verb="GET,DEBUG" type="System.Web.Handlers.WebAdminHandler" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="AssemblyResourceLoader-Integrated-4.0" path="WebResource.axd" verb="GET,DEBUG" type="System.Web.Handlers.AssemblyResourceLoader" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="PageHandlerFactory-Integrated-4.0" path="*.aspx" verb="GET,HEAD,POST,DEBUG" type="System.Web.UI.PageHandlerFactory" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="SimpleHandlerFactory-Integrated-4.0" path="*.ashx" verb="GET,HEAD,POST,DEBUG" type="System.Web.UI.SimpleHandlerFactory" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="WebServiceHandlerFactory-Integrated-4.0" path="*.asmx" verb="GET,HEAD,POST,DEBUG" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="HttpRemotingHandlerFactory-rem-Integrated-4.0" path="*.rem" verb="GET,HEAD,POST,DEBUG" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="HttpRemotingHandlerFactory-soap-Integrated-4.0" path="*.soap" verb="GET,HEAD,POST,DEBUG" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="aspq-Integrated-4.0" path="*.aspq" verb="GET,HEAD,POST,DEBUG" type="System.Web.HttpForbiddenHandler" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="cshtm-Integrated-4.0" path="*.cshtm" verb="GET,HEAD,POST,DEBUG" type="System.Web.HttpForbiddenHandler" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="cshtml-Integrated-4.0" path="*.cshtml" verb="GET,HEAD,POST,DEBUG" type="System.Web.HttpForbiddenHandler" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="vbhtm-Integrated-4.0" path="*.vbhtm" verb="GET,HEAD,POST,DEBUG" type="System.Web.HttpForbiddenHandler" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="vbhtml-Integrated-4.0" path="*.vbhtml" verb="GET,HEAD,POST,DEBUG" type="System.Web.HttpForbiddenHandler" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="ScriptHandlerFactoryAppServices-Integrated-4.0" path="*_AppService.axd" verb="*" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="ScriptResourceIntegrated-4.0" path="*ScriptResource.axd" verb="GET,HEAD" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" preCondition="integratedMode,runtimeVersionv4.0" />
<add name="AXD-ISAPI-4.0_32bit" path="*.axd" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="PageHandlerFactory-ISAPI-4.0_32bit" path="*.aspx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="SimpleHandlerFactory-ISAPI-4.0_32bit" path="*.ashx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="WebServiceHandlerFactory-ISAPI-4.0_32bit" path="*.asmx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="HttpRemotingHandlerFactory-rem-ISAPI-4.0_32bit" path="*.rem" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="HttpRemotingHandlerFactory-soap-ISAPI-4.0_32bit" path="*.soap" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="aspq-ISAPI-4.0_32bit" path="*.aspq" verb="*" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="cshtm-ISAPI-4.0_32bit" path="*.cshtm" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="cshtml-ISAPI-4.0_32bit" path="*.cshtml" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="vbhtm-ISAPI-4.0_32bit" path="*.vbhtm" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="vbhtml-ISAPI-4.0_32bit" path="*.vbhtml" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="TraceHandler-Integrated" path="trace.axd" verb="GET,HEAD,POST,DEBUG" type="System.Web.Handlers.TraceHandler" preCondition="integratedMode,runtimeVersionv2.0" />
<add name="WebAdminHandler-Integrated" path="WebAdmin.axd" verb="GET,DEBUG" type="System.Web.Handlers.WebAdminHandler" preCondition="integratedMode,runtimeVersionv2.0" />
<add name="AssemblyResourceLoader-Integrated" path="WebResource.axd" verb="GET,DEBUG" type="System.Web.Handlers.AssemblyResourceLoader" preCondition="integratedMode,runtimeVersionv2.0" />
<add name="PageHandlerFactory-Integrated" path="*.aspx" verb="GET,HEAD,POST,DEBUG" type="System.Web.UI.PageHandlerFactory" preCondition="integratedMode,runtimeVersionv2.0" />
<add name="SimpleHandlerFactory-Integrated" path="*.ashx" verb="GET,HEAD,POST,DEBUG" type="System.Web.UI.SimpleHandlerFactory" preCondition="integratedMode,runtimeVersionv2.0" />
<add name="WebServiceHandlerFactory-Integrated" path="*.asmx" verb="GET,HEAD,POST,DEBUG" type="System.Web.Services.Protocols.WebServiceHandlerFactory, System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" preCondition="integratedMode,runtimeVersionv2.0" />
<add name="HttpRemotingHandlerFactory-rem-Integrated" path="*.rem" verb="GET,HEAD,POST,DEBUG" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" preCondition="integratedMode,runtimeVersionv2.0" />
<add name="HttpRemotingHandlerFactory-soap-Integrated" path="*.soap" verb="GET,HEAD,POST,DEBUG" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" preCondition="integratedMode,runtimeVersionv2.0" />
<add name="AXD-ISAPI-2.0" path="*.axd" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness32" responseBufferLimit="0" />
<add name="PageHandlerFactory-ISAPI-2.0" path="*.aspx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness32" responseBufferLimit="0" />
<add name="SimpleHandlerFactory-ISAPI-2.0" path="*.ashx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness32" responseBufferLimit="0" />
<add name="WebServiceHandlerFactory-ISAPI-2.0" path="*.asmx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness32" responseBufferLimit="0" />
<add name="HttpRemotingHandlerFactory-rem-ISAPI-2.0" path="*.rem" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness32" responseBufferLimit="0" />
<add name="HttpRemotingHandlerFactory-soap-ISAPI-2.0" path="*.soap" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness32" responseBufferLimit="0" />
<add name="AXD-ISAPI-2.0-64" path="*.axd" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness64" responseBufferLimit="0" />
<add name="PageHandlerFactory-ISAPI-2.0-64" path="*.aspx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness64" responseBufferLimit="0" />
<add name="SimpleHandlerFactory-ISAPI-2.0-64" path="*.ashx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness64" responseBufferLimit="0" />
<add name="WebServiceHandlerFactory-ISAPI-2.0-64" path="*.asmx" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness64" responseBufferLimit="0" />
<add name="HttpRemotingHandlerFactory-rem-ISAPI-2.0-64" path="*.rem" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness64" responseBufferLimit="0" />
<add name="HttpRemotingHandlerFactory-soap-ISAPI-2.0-64" path="*.soap" verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v2.0.50727\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv2.0,bitness64" responseBufferLimit="0" />
<add name="CGI-exe" path="*.exe" verb="*" modules="CgiModule" resourceType="File" requireAccess="Execute" allowPathInfo="true" />
<add name="TRACEVerbHandler" path="*" verb="TRACE" modules="ProtocolSupportModule" requireAccess="None" />
<add name="OPTIONSVerbHandler" path="*" verb="OPTIONS" modules="ProtocolSupportModule" requireAccess="None" />
<add name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" path="*." verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="ExtensionlessUrlHandler-ISAPI-4.0_64bit" path="*." verb="GET,HEAD,POST,DEBUG" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" responseBufferLimit="0" />
<add name="StaticFile" path="*" verb="*" modules="StaticFileModule,DefaultDocumentModule,DirectoryListingModule" resourceType="Either" requireAccess="Read" />
</handlers>
</system.webServer>
I'm at a loss as to what to do next, other than start over from scratch.

ARIBA Integration with SAP (based in iDoc interchange) with deviating "remit-to" addresses for incoming vendor invoices

Hi,
We are currently trying to implement our ARIBA interface for incoming vendor invoices (purchase order based invoice verifiction) and facing currently some major challanges of a business requirements to interface alternative "payment remit to" addresses of vendor invoices. Our current setting consider the data exchange via iDocs into our SAP system, but unfortunately we are unable to process any deviating "remit to" address in the incoming document. As an ARIBA private ID we indicated the combination of "company code" with "vendor number". Can anybody advise how other companies resolved this challange? Thanks for your input, Jakob Kistler

Hi,
I am sending only answers.If wrong pls correct me.
1.A,C
2.C
3.A,B,D,E
4.ACE
5.ABCD
6.B
7.BE
8.ALL
9.ABC
10.ABCDE
11.A
12.ABCD
13.E
14.BC
15.ALL
16.ABC
17.ACD
18.AC
19.B
20.ACDE
21.DE
22.B
23.ABCD
24.CD
25.C
26.BDE
27.BCE
28.C
29.CDE
30.BCDE
31.BDE
32.A
33.B
34.ALL
35.ABC
36.ALL
37.ABC
38.A
39.ACDE
40.AB
41.ABE
42.CD
43.ABCE
44.CD
45.ACDE
46.BD
47.AC
48.CD
I have sent answers for the questions.If any answer is wrong pls correct me.
Assign points if useful
Regards,
S.VINAYA KUMAR

REM and QM integration

Hi Friends,
in continous manuyfacturing cement industry REM is used , in the process quality parameter monitered for each hour. so each shift 8 quality parameter noted, how to map this scenario in REM ?
regards
Sandeep

Sandeep,
You need to map the parameters as MICs in the inspection plan that you will create. You need to create inspection lots at regular intervals using transaction MFPR for every shift.
Then do the results recording for each inspection lot. The parameters will be recorded for each shift.
Hope this is useful.
Regards
Ram

PM-REM(FXRE) Integration

Hi There,
We have PM-FXRE integration. We want to create automatic Functional Location creation from RE object(s). All the Functional location will be created in the background in line with FXRE objects. Do we need to have a separate FL hierarchy for functional locations? Or we will just use these FLs to capature cost without Plant Maintenance standard hierarchy for FL.
Thanks,
Sanjay

Sanjay,
It is up to you how you structure your FLocs. The could be:
All FLocs within a structure
All Floc are not structured
A combination of the above
See the SAP Help for more details on FLocs.
One point thought, make sure you use the FLoc Category for REFX objects, not the standard categories for standard PM (e.g. "M").
PeteA

BOE XI 3.1 - Metadata Integrator - DataServices 12.0 - Impact/Lineage

I am having issues with getting impact and lineage to work. I have the following installed:
- BOE XI 3.1
- DataServices 12.0
- Metadata Integrator as part of the same DataServices installation
Everything is installed and working well...independently. Once I found the new way to secure program object execution, I was able to get the Metadata Integrator program under the \DataServices directory in the CMC to execute successfully. I then go into the Data Services Management Console and expect to see Impact/Lineage. However, there is nothing there to choose.
I have DI Designer set to save column mappings when saving the dataflow, and I have run that program mentioned above. When I go into the Settings hyperlink of the Impact/Lineage section of the console, there is not a Repository in the dropdown list for Settings. There also isn't a Job Server in the dropdownlist for "Refresh Usage Data" even though I have a working/running DI Job Server. FYI, I am running IE7.
Finally, I went ahead and tried to create a Business Objects Connection. I get the error message:
Business Objects repository tables do not exist in this database.
That seems to be a big red flag since I am accessing BOBJ tables in that exact database to have the CMC/Infoview work successfully.
Am I dealing with a version problem between products, or am I still missing a fundamental step to get this to work correctly? Are there issues with IE7? The Administration portion of the Data Services Management Console seems to work just fine. FYI, I was able to create a CMS connection there, also.
Thanks for the help,
Brian

you don't see the lineage for BO since its not collected the cmsCollector is failing
you don't have to upgrade all DS component, you can use the DS 12.1.1.0 Metadata Integrator component only, this is an Independent component and is dependent more on BOE than DS
is all DS component Installed on same machine ? in that case you will have to install the Metadata Integrator Component on different machine and copy the %LINK_DIR%/ext/cmsCollector folder to your current installation (rename the current cmsCollector folder to cmsCollector120) and run the following script to setup the env and path for Metadata Integrator
if this doesn't work remove this folder and restore the old cmsCollector folder back, everything should be same as earlier
do this if you are comfortable with doing manual setups
put the following in a cmd file named setupMI.cmd, in the %LINK_DIR%/ext/cmsCollector folder
and run the cmd file from th ecommand line, only thing that you will have to set if different in the script is BOE_SDK path
set local
set BOE_SDK=C:\Program Files\Business Objects\common\4.0\java\lib
set INSTALL_DIR=%LINK_DIR%
set JAVA_HOME=%LINK_DIR%\ext\jre
rem following is complete single line
"%JAVA_HOME%\bin\java.exe" -classpath "%INSTALL_DIR%\lib\loader.jar;%INSTALL_DIR%\ext\cmsCollector\lib\cms_md_collector.jar" -Djava.system.class.loader=com.bobj.ConfigurableClassLoader -Dclassloader.properties="%INSTALL_DIR%\ext\cmsCollector\classloader.properties" -Dink_dir="%INSTALL_DIR%" -Dboe_dir="%BOE_SDK%" com.acta.crystalrepo.config.crConfigureCommands "%INSTALL_DIR%\ext\cmsCollector\/" "%BOE_SDK%\/" "%INSTALL_DIR%\/"

Problem in starting Integration service with DAC 11g

Hi friends,
Im @ the step of registering integration service and the repository service in DAC 11g. I can start the Repository service well in DAC, but facing issue in starting integration service with DAC, while trying to test connection im getting a message like
Failure connecting to BIA_IS!
Im not sure the reason to this problem in DAC. I have also setted the necessary environment variables like INFA_HOME and INFA_DOMAINS_FILE referring the domains.infa file like
INFA_DOMAINS_FILE = C:\Informatica\9.1.0\domains.infa
Also checked with the dac_env file which has the below contents
REM -----------------------------------------------------
REM
REM ENVIRONMENT VARIABLES THAT YOU MAY NEED TO SET FOR
REM PROPER INFORMATICA 8.x or 9.x HANDSHAKE.
REM
REM INFORMATICA_SERVER_LOCATION denotes installation of
REM Informatica components. Example:
REM C:\Informatica\PowerCenter9.1
REM
REM DOMAINS.INFA_FILE_LOCATION denotes the location
REM (including name) of domains.infa file
REM
REM Please make sure to set correct values for variables
REM mentioned above
REM
REM -----------------------------------------------------
set INFORMATICA_SERVER_LOCATION="C:\Informatica\9.1.0"
set DOMAINS_INFA_FILE_LOCATION=C:\Informatica\9.1.0\domains.infa
set INFA_CMD_STYLE=8
set PATH=C:\Informatica\9.1.0\server\bin;%PATH%
set INFA_DOMAINS_FILE=%DOMAINS_INFA_FILE_LOCATION%
What could be the problem and where to check with the logfile related to the integration service failure in DAC.
Thanks in advance.
Regards,
Saro

Hi guys,
The issue is sorted out. The below are the two precautions to be considered.
*) Make sure of INFA_HOME/Server/bin exist @ the end in the PATH variable.
*) For each and every change in the PATH variable, it is better to restart the services(both infa and DAC) then and there for the changes to take effect.
Regards,
Saro

How to Send a .txt file through FTPTARGET connector of Integration Broker

Hi,
Is it possible to send a .txt file(infact anyfile other than xml format) to a host server using FTP Target connector of Integration Broker. If so can someone explain the steps to achieve it.
Regards,
Uday

Yes, you can do that. I've done exactly that couple years ago.
If I remember currently, below is a high level of how I did it.
Read the file you want to send into the buffer using GetString function like:
+/*A single string containing the entire contents of the file including line terminator.+
+ After this method completes successfully, the temp file is deleted.*/+
+&FileData = &FiletoRead.GetString();+
The function deletes the file so I had to create a temp copy of what i want to send and read that copy instead of the original file. Also, IB will have issues if you are trying to send an empty file. so i did a basic check, if the file is empty then put something in it.
rem -- IB message will fail if we are trying to send an empty file;
If None(&FileData) Or
+&FileData = "" Or+
+&FileData = " " Then+
MessageBox(0, "", 0, 0, ("File " | &sTargetFileName | " is empty."));
+&FileData = "No Data Found!";+
End-If;
Next, you need to load the file data that are now in &FileData to IB:
+&MSG = CreateMessage(@&sServiceOperation);+
+/* Generate the XML doc. */+
+&dFtp = CreateXmlDoc("");+
rem -- &bReturn = &dFtp.LoadIBContent("Some text inside of a file to send through IB!");
+&bReturn = &dFtp.LoadIBContent(&FileData);+
Then put XML into the message and publish it:
+/*put the XML in the message*/+
+&MSG.SetXmlDoc(&dFtp);+
+%IntBroker.Publish(&MSG);+
You might need to load some IBConnectorInfo and override them using your PC. I had to do that to get the password for the FTP transmission encrypted:
/* Encrypt the password */
&pscipher = CreateJavaObject("com.peoplesoft.pt.integrationgateway.common.EncryptPassword");
&encPassword = &pscipher.encryptPassword(&sPassword);
&pscipher = Null;
Good luck and hope this helps.

X6250 STK REM BIOS upgrade

Hi All,
we had a minor problem with on STK REM Raid controller during installation of w2k8. On one of six similar X6250 the system disk crash 2 time and SUN support advised me to upgrade the BIOS of the STK from version 15825 to 15829 (the latest one). But it seems that this is major issue to boot each balde to dos and you need at least 7 diskettes for the upgrade.
Is there any other way to do the upgrade with OS booted (e.g. w2k8).
Best regards,
Anton

Well, some good news at last. I think I solve the problem with BL0.
I loaded an older firmware with load command, at end it yeild the same error about not being able to write the BIOS, but rest of the firmware was loaded. Then I try to load back the actual one ..... and surprise this time the installation finished OK.
-> version
SP firmware 2.0.3.6
SP firmware build number: 36946
SP firmware date: Mon Sep 15 12:46:49 PDT 2008
SP filesystem version: 0.1.17
-> load -source tftp://128.90.43.111/ilom.X6250-2.0.3.6-r38189.pkg
NOTE: A firmware upgrade will cause the server and ILOM to
      be reset. It is recommended that a clean shutdown of
      the server be done prior to the upgrade procedure.
      An upgrade takes about 6 minutes to complete. ILOM
      will enter a special mode to load new firmware. No
      other tasks can be performed in ILOM until the
      firmware upgrade is complete and ILOM is reset.
Are you sure you want to load the specified file (y/n)? y
Do you want to preserve the configuration (y/n)? n
Firmware update is complete.
ILOM will now be restarted with the new firmware.
-> /sbin/reboot
login as: root
Using keyboard-interactive authentication.
Password:
Access denied
Using keyboard-interactive authentication.
Password:
Sun(TM) Integrated Lights Out Manager
Version 2.0.3.6
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Warning: password is set to factory default.
-> version
SP firmware 2.0.3.6
SP firmware build number: 38189
SP firmware date: Thu Oct 16 03:27:04 CST 2008
SP filesystem version: 0.1.17

DI Metadata Integrator install problems

Environment: BOE BO XI r2 SP4 installed on windows server A with an Oracle dB
Data Integrator 11.5 is installed on a windows server B
we have also installed the BOE components, designer, webi, etc on server B.
Problem: When we try to install DI metadata integrator on server B, I get the following error:
'...path not found'
when i try to run the cmsConfig.cmd file from dos i get the same error.
I have checked and see all the jar files. Any help would be appreciated
See below the information in the cmsconfig.cmd file
@echo off
setlocal
rem Define the directory containing the Business Objects Enterprise and collector jar files.
rem NOTE: Do not change the names of the following environment variables. They are subject
rem to automatic update by the install utility.
set DI_DIR=C:\PROGRA1\BUSINE1\DATAIN~1.7
set CE_JARS_DIR=C:\PROGRA1\BUSINE1\common\3.5\java\lib
set DI_CRAWLER_DIR=C:\PROGRA1\BUSINE1\DATAIN~1.7\ext\cmsCollector
if NOT defined JAVA_HOME set JAVA_HOME=%DI_DIR%\ext\jre
set CLASSPATH=%DI_DIR%\lib\loader.jar
"%JAVA_HOME%\bin\java" -Djava.system.class.loader=com.bobj.ConfigurableClassLoader -Dclassloader.properties="%DI_CRAWLER_DIR%\classloader.properties"
-Dlink_dir="%DI_DIR%" -Dboe_dir="%CE_JARS_DIR%" com.acta.crystalrepo.config.crConfigLaunch -C"%CE_JARS_DIR%" -I"%DI_CRAWLER_DIR%" -D"%DI_DIR%" %*
:EXIT
See below the information in the properties file
Application jars
cp.0.directory=%link_dir%
lib
cp.0.jars=acta_adapter_sdk.jar;acta_tool.jar;log4j-1.2.3.jar
Business Objects Enterprise jars
cp.1.directory=%boe_dir%
cp.1.jars=cecore.jar;celib.jar;ceplugins.jar;cereports.jar;cesession.jar;corbaidl.jar;ebus405.jar;pluginhelper.jar;rasapp.jar;rascore.jar;serialization.jar;webi.jar;wilog.jar;jtools.jar;boconfig.jar;rebean.jar;rebean.wi.jar;rebean.common.jar
webi.directory=%boe_dir%
webi.jars=webi.jar;wilog.jar;jtools.jar;boconfig.jar
CMS Metadata Integrator jar
cp.2.directory=%link_dir%
ext
cmsCollector
lib
cp.2.jars=cms_md_collector.jar;MMCore.jar;MMCMS.jar
External jars
cp.3.directory=%link_dir%
ext
lib
cp.3.jars=xerces.jar;msutil.jar;commons-logging.jar
Web External jars
cp.4.directory=%link_dir%
ext
diAdmin
WEB-INF
lib
cp.4.jars=sqljdbc.jar;ojdbc14.jar;db2java.jar;ifxjdbc.jar;ifxjdbcx.jar;jconn2.jar;jconnect45.jar;mysql-connector-java-5.0.4-bin.jar

Found a solution, see link below
http://www.forumtopics.com/busobj/viewtopic.php?p=581371&sid=ee3cd084cfd9010cfda6665224f809e1

Web Integration Server service can't start in Windows Nt

Hi there,
I just remove my Portal-to-Go 1.0.2 in Windows NT Server, and install the 1.0.1.4.6, but after the installation, in the service in control panel, the service Web Integration Sever can't start, the error message is 2186: the service does not responsing the control function; and when I run the D:\Oracle8\panama\WebIntegration\Server\bin\server.bat the server still not running. the out put of server.bat is enclosed. Any help will be great appreciated.
David
***** Out put of server.bat
D:\>rem echo off
D:\>rem
D:\>rem Copyright (c) 1996-1998, webMethods Inc. All Rights Reserved.
D:\>rem server.bat: Run the B2B Integration Server
D:\>rem
D:\>rem Change SERVDIR and JDKDIR to reflect their locations on your system
D:\>rem CODEDIR should point to the location of the Java service classes
D:\>rem
D:\>rem --- SET THE FOLLOWING LINE TO "true" TO RUN ON Win95 ---
D:\>SET IS95=false
D:\>rem --- RESTRICT VAR CHANGES TO LOCAL BATCH FILE
D:\>if false == false SETLOCAL
D:\>SET SERVDIR=D:\Oracle\panama\WebIntegration\Server
D:\>SET JDKDIR=D:\Oracle\panama\WebIntegration\Server\jvm
D:\>rem --- MUST SET TO ALLOW MULTIPLE RUNS OF SCRIPT ---
D:\>SET LOCAL=N
D:\>rem --- SAVE COPY OF PATH BEFORE SERVER STARTS TO ALLOW LOOPING ---
D:\>SET SLP=D:\jdk1.2.2\bin;D:\Oracle\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\WINNT\system32;C:\WINNT;C:\Program Files\Dell\OpenManage\Resolution Assistant\Common\bin;C:\Inoculan;D:\Oracle\orb\bin;;D:\Oracle\panama\WebIntegration\Server\lib
D:\>SET SCP=D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\code\classes;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;
D:\>rem --- SET THE FOLLOWING LINE TO "true" USE JVIEW ---
D:\>SET USEJVIEW=false
D:\>rem --- SKIP STUFF 95 BARFS ON ---
D:\>if false == true goto nolocal
D:\>rem -- ALLOW "LOCAL" STARTS WHERE JVM AND BASE CLASSPATH ARE KNOWN
D:\>SET one=
D:\>if not defined one goto nolocal
D:\>rem --- JUMP PAST "UTIL" FUNCTIONS ---
D:\>goto start
D:\>SET PATH=D:\jdk1.2.2\bin;D:\Oracle\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\WINNT\system32;C:\WINNT;C:\Program Files\Dell\OpenManage\Resolution Assistant\Common\bin;C:\Inoculan;D:\Oracle\orb\bin;;D:\Oracle\panama\WebIntegration\Server\lib
D:\>SET CLASSPATH="D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\code\classes;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;;D:\Oracl e\panama\WebIntegration\Server\lib\classes"
D:\>if N == N goto setcp
D:\>if false == false SET CLASSPATH="D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes"
D:\>if false == true SET CLASSPATH="C:\WINNT\JAVA\CLASSES\CLASSES.ZIP;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes"
D:\>rem
D:\>rem The server must always start up in it's installation directory
D:\>rem
D:\>if N == N cd "D:\Oracle\panama\WebIntegration\Server"
D:\Oracle\panama\WebIntegration\Server>rem --- UPDATE PATH AND CLASSPATH FOR PACKAGES ---
D:\Oracle\panama\WebIntegration\Server>if false == true goto skippkg
D:\Oracle\panama\WebIntegration\Server>FOR /D %D in (packages\*) do CALL :setpaths %D
D:\Oracle\panama\WebIntegration\Server>CALL :setpaths packages\Default
D:\Oracle\panama\WebIntegration\Server>rem -- next line only required in 1.15 and earlier --
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\Default\code\libs CALL :setpaths2 packages\Default
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>CALL :setpaths packages\WmDemos
D:\Oracle\panama\WebIntegration\Server>rem -- next line only required in 1.15 and earlier --
D:\Oracle\panama\WebIntegration\S erver>if EXIST packages\WmDemos\code\libs CALL :setpaths2 packages\WmDemos
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>CALL :setpaths packages\WmDemosNative
D:\Oracle\panama\WebIntegration\Server>rem -- next line only required in 1.15 and earlier --
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\WmDemosNative\code\libs CALL :setpaths2 packages\WmDemosNative
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\WmDemosNative\code\classes SET CLASSPATH="D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes";packages\ WmDemosNative\code\classes
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\WmDemosNative\code\classes.zip SET CLASSPATH="D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes";packages\ WmDemosNative\code\classes;packages\WmDemosNative\code\classes.zip
D:\Oracle\panama\WebIntegration\Server>SET PATH=packages\WmDemosNative\code\libs;D:\jdk1.2.2\bin;D:\Oracle\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\WINNT\system32;C:\WINNT;C:\Program Files\Dell\OpenManage\Resolution Assistant\Common\bin;C:\Inoculan;D:\Oracle\orb\bin;;D:\Oracle\panama\WebIntegration\Server\lib
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>CALL :setpaths packages\WmRoot
D:\Oracle\panama\WebIntegration\Server>rem -- next line only required in 1.15 and earlier --
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\WmRoot\code\libs CALL :setpaths2 packages\WmRoot
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>CALL :setpaths packages\WmUtil
D:\Oracle\panama\WebIntegration\Server>rem -- next line only required in 1.15 and earlier --
D:\Oracle\panama\WebIntegration\Server>if EXIST packages\WmUtil\code\libs CALL :setpaths2 packages\WmUtil
D:\Oracle\panama\WebIntegration\Server>goto :eof
D:\Oracle\panama\WebIntegration\Server>rem --- Win95 IS MISSING NECESSARY "IF" COMMAND ---
D:\Oracle\panama\WebIntegration\Server>if false == true goto jview
D:\Oracle\panama\WebIntegration\Server>if N == Y goto local
D:\Oracle\panama\WebIntegration\Server>SET SCMD="D:\Oracle\panama\WebIntegration\Server\jvm\bin\jre" -ms64M -mx64M -classpath "D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes";packages\WmDemosNat ive\code\classes
D:\Oracle\panama\WebIntegration\Server>goto runserver
D:\Oracle\panama\WebIntegration\Server>"D:\Oracle\panama\WebIntegration\Server\jvm\bin\jre" -ms64M -mx64M -classpath "D:\Oracle\panama\WebIntegration\Server\jvm\LIB\RT.JAR;D:\Oracle\panama\WebIntegration\Server\LIB\SERVER.ZIP;D:\Oracle\panama\WebIntegration\Server\lib\classes";packages\WmDemosNat ive\code\classes watt.app.server.Main
D:\Oracle\panama\WebIntegration\Server>goto done
D:\Oracle\panama\WebIntegration\Server>rem --- IF SERVER WANTS TO LOOP THEN START OVER ---
D:\Oracle\panama\WebIntegration\Server>if ERRORLEVEL 42 goto start
D:\Oracle\panama\WebIntegration\Server>rem --- END OF LOCAL VAR CHANGES ---
D:\Oracle\panama\WebIntegration\Server>if false == false ENDLOCAL
null

Sorry for my bad english.
I fix the bug , it wasn't because of Mac os x server but only my install of "entropy-php.mpkg" what put a file into httpd conf directory "/etc/httpd/sites/". By removing this file, the web services can restart.
ouf...
have a good day..

QM in REM Scenario

Dear All,
I am working on REM Scenario with QM integration,
The requirement is there should be a inspection lot created which is stock relevant, similar to inspection type 04 in process industry and discrete industry where once GR is done against an order an inspection lot is created which is stock relevant.
Similarily once back flush is done in MFBF no inspection lot is created and stock moves to unrestricted directly
I know there is inspection type 13 which is used for in process inspection in REM but that is non stock relevant inspection.So my question is how can i map this type of scenario???
Can we use inspection type 04 in REM???How can we bring the stock to inspection stock with a lot created after backflush is done in MFBF???
Please provide your valuable inputs...

Hi
In REM 13 Is used for Inprocess whereas for Final Inspection 04 is used.
In MFPR 13 inspection type lot is created.After MFBF ,backflush takes place & stock relevent 04 inspection type is created.
Can we use inspection type 04 in REM???How can we bring the stock to inspection stock with a lot created after backflush is done in MFBF???
04 will be automatically created after MFBF(QTY equal to backflush QTY) if it is active.This will solve your peprose
I hope this will add some value
Regards
Sujit

Micro SDCard unreadable .rem files in Q10

Hi:
This is the last try of this new Q10 phone, my 5th Blackberry. If I cannot solve this problem, I'm changing to a Samsung early next week.
I cannot follow any instructions on how to download multimedia files from my MicroSD Card into the Q10 from the device since it doesn't provide any screens to do so. The help indicates that you will be prompted when the SD card is inserted, and I am not provided with any prompts.
I can see the files on Blackberry link under Blackberry folder but they won't be downloaded even after saving them to the Q10.
Can anyone help me with this Micro SDCard??
Link is not easy to manage. E-mail account names appear differently on the Q10 Hub than when created in the Settings. The calendar is a black background that cannot be changed and I cannot view my appointments/meetings at glance easily. This thing of having all the screens in black is very annoying!
Carole

You have some misconceptions here.
1. Where did these .rem files come from? If those .rem files are from a previous BlackBerry device the are encrypted FROM that previous device, and absolutely cannot be opened on another BlackBerry or any device. Please explain where the files orginiated.
2. Your Bell Sympatico accounts are able to integrate to the Q10... how to here: Unable to integrate or send from a Sympatico or Bell Aliant email account on the BlackBerry 10 smart...
3. Gmail email and calendar are both available on the Q10.
Available contact and calendar synchronization features on a BlackBerry PlayBook tablet or BlackBerr...
How to setup Google Calendar synchronization via CalDAV on the BlackBerry PlayBook tablet or BlackBe...
Sync Time Frame for integrated CalDAV calendars on the BlackBerry 10 OS
Gmail calendar items are not populated on the device in a timely manner after integration
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to make integrated weblogic server use log4j

Hi all,
I use Jdeveloper 11.1.1.6, WL 10.3 on Win7. JDK 1.6.0.3x64
I tried to configure for 1 day during according to guides and informations on net. But i can not make it works unfortunately. Just after i start wls, encountered this:
<14-12-2012 10:42:00 o'clock EET> <Error> <Log Management> <BEA-170022> <Log4j failed to initialize for DefaultServer. The default JDK Logging implementation will be used.
java.lang.ClassNotFoundException: weblogic.logging.log4j.JDKLog4jAdapterFactory
     at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
     Truncated. see log file for complete stacktrace
>
I followed up basically through those links log4j Configuration in Standalone Weblogic Server - ADF and http://docs.oracle.com/cd/E15051_01/wls/docs103/logging/config_logs.html#using_log4j
I changed Logging implementation as Log4j from JDK: http://www.2hotfile.com/image.php?di=72YU
I created log4j.xml file under my %DOMAINHOME%\config : http://www.2hotfile.com/image.php?di=JHLI
<?xml version="1.0" encoding="UTF-8" ?><!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration>
<appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender">
<param name="Threshold" value="INFO"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern"
value="%d{ABSOLUTE} %-5p [%c{1}] %m%n"/>
</layout>
</appender>
<appender name="FILE" class="org.apache.log4j.DailyRollingFileAppender">
<param name="File" value="/log/daily.log"/>
<param name="Append" value="false"/>

<param name="DatePattern" value="'.'yyyy-MM-dd"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d %-5p [%c] %m%n"/>
</layout>
</appender>
<logger name="org.apache">
<level value="WARN"/>
</logger>
<root>
<level value="DEBUG"/>
<appender-ref ref="FILE"/>

</root>
</log4j:configuration>
i copied log4j.jar, wllog.jar into my %DOMAINHOME%\lib : http://www.2hotfile.com/image.php?di=BYB3
Even i copied commons-logging-1.0.4.jar and com.bea.core.weblogic.commons.logging_1.4.0.0.jar files into the lib folder and then i set CLASSPATH accordingly, result was negative.
I added these lines into startWeblogic.cmd
@REM customized here for log4j
set LOG4J_CONFIG_FILE=%DOMAIN_HOME%\config\log4j.xml
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.log.Log4jLoggingEnabled=true -Dlog4j.debug -Dlog4j.configuration=%LOG4J_CONFIG_FILE%
set SAVE_CLASSPATH=%CLASSPATH%;%DOMAIN_HOME%\config;
Additionally, i have tried adding log4j.jar into sysyem classpath becuse of classloading problem suspicion: http://www.2hotfile.com/image.php?di=7Y3N after view this link http://www.coderanch.com/t/479763/BEA-Weblogic/Log-Weblogic-ClassNotFoundException
Thanks in advance...
Edited by: webyildirim on 14.Ara.2012 02:45

I resolved the exception; Jdeveloper 11.1.1.4 was setted up on my pc as well. That was the cause of problem. System was looking some paths on 11.1.1.4 server folders that belong to 11.1.14 version.
Now, created server log which i defined in log4j.xml but no log line found in file, nothing logged according to log4j.xml config file and wls still writes its own log into its own log file which is under $domain_home$\servers\DefaultServer\logs\DefaultServer.log. What might be the reason?
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/"
debug="true">

<appender name="FILE" class="org.apache.log4j.DailyRollingFileAppender">
<param name="File" value="./server.log"/>
<param name="Append" value="false"/>

<param name="DatePattern" value="'.'yyyy-MM-dd"/>

<layout class="org.apache.log4j.PatternLayout">

<param name="ConversionPattern" value="%d %-5p [%c] %m%n"/>

</layout>
</appender>
<appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender">
<param name="Target" value="System.out"/>
<param name="Threshold" value="INFO"/>
<layout class="org.apache.log4j.PatternLayout">

<param name="ConversionPattern" value="%d{ABSOLUTE} %-5p [%c{1}] %m%n"/>
</layout>
</appender>
<category name="org.apache">
<priority value="DEBUG"/>
</category>
<category name="com.weblogic">
<priority value="DEBUG"/>
</category>
<category name="com.roketsan">
<priority value="DEBUG"/>
</category>
<category name="org.hibernate">
<priority value="DEBUG"/>
</category>
<category name="log4j.category.org.hibernate">
<priority value="DEBUG"/>
</category>
<category name="log4j.category.org.hibernate.SQL">
<priority value="STDOUT"/>
</category>
<root>
<appender-ref ref="CONSOLE"/>
<appender-ref ref="FILE"/>
</root>
</log4j:configuration>
jdeveloper integrated weblogic console output: http://www.2hotfile.com/image.php?di=TPY2
*** Using port 7101 ***
C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
this is suuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuun
'LOG4J_CONFIG_FILE' i‡ ya da dis komut, ‡alistirilabilir
program ya da toplu is dosyasi olarak taninmiyor.
JAVA Memory arguments: -Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK16~1.0_3\lib\tools.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1.6\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1.6\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\wcps-lib\derby-10.6.1.0.jar;C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\wcps-lib\derbytools-10.6.1.0.jar;C:\Oracle\Middleware_11.1.1.6\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;C:\Oracle\Middleware_11.1.1.6\jdeveloper\webcenter\modules\wcps_11.1.1.6.0\wcps-connection-mbeans.jar;C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\xqrl.jar;.
PATH=C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK16~1.0_3\jre\bin;C:\PROGRA~1\Java\JDK16~1.0_3\bin;C:\Program Files\Java\jre6X64;C:\Program Files\Java\jre6X64\bin;C:\Oracle\database\app\oracle\product\11.2.0\server\bin;C:\Oracle\database\app\oracle\product\11.2.0\server;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Dell\Dell Wireless WLAN Card;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\OpenVPN\bin;C:\Users\Dijitaluser\Desktop\Yeni klas”r\commons-logging-1.0.4.jar;;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_30"
Java(TM) SE Runtime Environment (build 1.6.0_30-b12)
Java HotSpot(TM) 64-Bit Server VM (build 20.5-b03, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_3\bin\java -client -Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic.policy -agentlib:jdwp=transport=dt_socket,server=y,address=52130 -Djavax.net.ssl.trustStore=C:\Oracle\Middleware_11.1.1.6\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1.6\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\DIJITA~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.92\DEFAUL~1\oracle\store\gmds -DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl -noverify -Doracle.webcenter.analytics.disable-native-partitioning=false -Doracle.webcenter.tagging.scopeTags=false -XX:+UseParallelGC -XX:+DisableExplicitGC -Dportlet.oracle.home=C:\Oracle\Middleware_11.1.1.6\jdeveloper -Dwc.oracle.home=C:\Oracle\Middleware_11.1.1.6\jdeveloper -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\sysext_manifest_classpath -Dlog4j.ignoreTCL=true -Dweblogic.log.Log4jLoggingEnabled=true -Dlog4j.debug weblogic.Server
Listening for transport dt_socket at address: 52130
Debugger connected to local process.
<18-Dec-2012 13:58:09 o'clock EET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<18-Dec-2012 13:58:10 o'clock EET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<18-Dec-2012 13:58:10 o'clock EET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\com.bea.core.weblogic.commons.logging_1.4.0.0.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\commons-logging-1.0.4.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\log4j-1.2.15.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\mbeantypes\csp-id-asserter.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\mbeantypes\jps-wls-trustprovider.jar;C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\lib\wllog4j.jar>
<18-Dec-2012 13:58:10 o'clock EET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.5-b03 from Sun Microsystems Inc.>
<18-Dec-2012 13:58:11 o'clock EET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<18-Dec-2012 13:58:12 o'clock EET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<18-Dec-2012 13:58:12 o'clock EET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<18-Dec-2012 13:58:12 o'clock EET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<18-Dec-2012 13:58:12 o'clock EET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00016. Log messages will continue to be logged in C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<18-12-2012 13:58:12 o'clock EET> <Notice> <Log Management> <WL-170019> <The server log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
log4j: Trying to find [log4j.xml] using context classloader java.net.URLClassLoader@7df44ec7.
log4j: Using URL [file:/C:/Users/Dijitaluser/AppData/Roaming/JDeveloper/system11.1.1.6.38.61.92/DefaultDomain/log4j.xml] for automatic log4j configuration.
log4j: Preferred configurator class: org.apache.log4j.xml.DOMConfigurator
log4j: System property is :null
log4j: Standard DocumentBuilderFactory search succeded.
log4j: DocumentBuilderFactory is: weblogic.xml.jaxp.RegistryDocumentBuilderFactory
log4j: debug attribute= "true".
log4j: reset attribute= "false".
log4j: Threshold ="null".
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [org.apache] additivity to [true].
log4j: Level value for org.apache is [DEBUG].
log4j: org.apache level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [com.weblogic] additivity to [true].
log4j: Level value for com.weblogic is [DEBUG].
log4j: com.weblogic level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [com.roketsan] additivity to [true].
log4j: Level value for com.roketsan is [DEBUG].
log4j: com.roketsan level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [org.hibernate] additivity to [true].
log4j: Level value for org.hibernate is [DEBUG].
log4j: org.hibernate level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [log4j.category.org.hibernate] additivity to [true].
log4j: Level value for log4j.category.org.hibernate is [DEBUG].
log4j: log4j.category.org.hibernate level set to DEBUG
log4j: Retreiving an instance of org.apache.log4j.Logger.
log4j: Setting [log4j.category.org.hibernate.SQL] additivity to [true].
log4j: Level value for log4j.category.org.hibernate.SQL is [STDOUT].
log4j: log4j.category.org.hibernate.SQL level set to DEBUG
log4j: Class name: [org.apache.log4j.ConsoleAppender]
log4j: Setting property [target] to [System.out].
log4j: Setting property [threshold] to [INFO].
log4j: Parsing layout of class: "org.apache.log4j.PatternLayout"
log4j: Setting property [conversionPattern] to [%d{ABSOLUTE} %-5p [%c{1}] %m%n].
log4j: Adding appender named [CONSOLE] to category [root].
log4j: Class name: [org.apache.log4j.DailyRollingFileAppender]
log4j: Setting property [file] to [./server.log].
log4j: Setting property [append] to [false].
log4j: Setting property [datePattern] to ['.'yyyy-MM-dd].
log4j: Parsing layout of class: "org.apache.log4j.PatternLayout"
log4j: Setting property [conversionPattern] to [%d %-5p [%c] %m%n].
log4j: setFile called: ./server.log, false
log4j: setFile ended
log4j: Appender [FILE] to be rolled at midnight.
log4j: Adding appender named [FILE] to category [root].
<18-12-2012 13:58:12 o'clock EET> <Warning> <NodeManager> <WL-300043> <Node manager native library not found - server process id not saved.>
<18-12-2012 13:58:13 o'clock EET> <Error> <Socket> <WL-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that wlntio.dll is in: 'C:\PROGRA~1\Java\JDK16~1.0_3\bin;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JDK16~1.0_3\jre\bin;C:\PROGRA~1\Java\JDK16~1.0_3\bin;C:\Program Files\Java\jre6X64;C:\Program Files\Java\jre6X64\bin;C:\Oracle\database\app\oracle\product\11.2.0\server\bin;C:\Oracle\database\app\oracle\product\11.2.0\server;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Dell\Dell Wireless WLAN Card;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\OpenVPN\bin;C:\Users\Dijitaluser\Desktop\Yeni klasör\commons-logging-1.0.4.jar;;C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32\oci920_8;.'
>
<18-12-2012 13:58:19 o'clock EET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<18-12-2012 13:58:20 o'clock EET> <Warning> <Store> <WL-280101> <The persistent file store "_WLS_DefaultServer" is forced to use buffered I/O and so may have significantly degraded performance. Either the OS/hardware environment does not support the chosen write policy or the native wlfileio library is missing. See store open log messages for the requested and final write policies. See the documentation on store synchronous write policy configuration for advice.>
<18-Dec-2012 13:58:20 o'clock EET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<18-Dec-2012 13:58:20 o'clock EET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\access.log00001. Log messages will continue to be logged in C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\access.log.>
<18-12-2012 13:58:23 o'clock EET> <Notice> <StdErr> <BEA-000000> <java.util.logging.ErrorManager: 0: oracle.core.ojdl.weblogic.DomainLogHandler ERROR: unable to find instance of weblogic.logging.DomainLogBroadcastHandler>
<18-12-2012 13:58:25 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to STANDBY>
<18-12-2012 13:58:25 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to STARTING>
<18-12-2012 13:58:29 o'clock EET> <Warning> <J2EE> <WL-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Roketsan is not versioned.>
<18-Dec-2012 13:58:37 o'clock EET> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<18-Dec-2012 13:58:37 o'clock EET> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00016. Log messages will continue to be logged in C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<18-12-2012 13:58:37 o'clock EET> <Notice> <Log Management> <WL-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<18-12-2012 13:58:37 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to ADMIN>
<18-12-2012 13:58:37 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to RESUMING>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[11]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Warning> <Server> <WL-002611> <Hostname "AD190", maps to multiple IP addresses: 169.254.50.94, 192.168.26.212, fe80:0:0:0:a1be:61f:f156:325e%38>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:a1be:61f:f156:325e:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[10]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a9fe:325e:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[7]" is now listening on fe80:0:0:0:a0d0:352d:6b23:d7dc:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:648c:26dc:32a5:1300:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:c0a8:1ad4:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:34a0:7762:7e2f:fca8:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default" is now listening on 192.168.26.212:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[2]" is now listening on 169.254.50.94:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <Server> <WL-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:fdaf:7651:30df:acb6:7101 for protocols iiop, t3, ldap, snmp, http.>
<18-12-2012 13:58:38 o'clock EET> <Notice> <WebLogicServer> <WL-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<18-12-2012 13:58:38 o'clock EET> <Notice> <WebLogicServer> <WL-000365> <Server state changed to RUNNING>
<18-12-2012 13:58:38 o'clock EET> <Notice> <WebLogicServer> <WL-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 30110 ms.
IntegratedWebLogicServer started.
Edited by: webyildirim on 18.Ara.2012 04:17

CO-product configuration in REM scenario

I am trying to configure co-product scenario with REM process. Is it possible?
If any one worked on this scenario please let me know what are the special consideration we need to take or any SAP note available?
Thanks in advaice.
Rajesha Vittal

in HELP.SAP.COM is the answer.
Product Cost Collector
Definition
Cost object in Product Cost by Period that collects the periodic actual costs incurred in the production of a material. When you use a product cost collector, the product is the main cost object.
Use
Product cost collectors are independent of the production type. This means that you can collect actual costs on product cost collectors in the following production environments:
In order-related production (that is, when you are using production orders) when you want to analyze the costs by period rather than by lot
In process manufacturing (that is, when you are using process orders) when you want to analyze the costs by period rather than by lot
Repetitive manufacturing
In repetitive manufacturing you always use product cost collectors as cost objects.
Product cost collectors are available from Release 4.5A onwards. In earlier releases, the costs of repetitive manufacturing materials were collected on production cost collectors. From Release 4.5A onwards, production cost collectors are converted into product cost collectors. For information on the conversion process, see Converting Production Cost Collectors into Product Cost Collectors.
Order splits for production orders
When you split production orders, the costs for the parent order and child order are allocated to the same product cost collector.
See also: Order Splits in Cost Object Controlling
Constraints
Product cost collectors cannot be used for the following objects and production environments:
Manufacturing orders that settle to a sales order item if you are using a nonvaluated sales order stock in sales-order-related production
Sales-order-related production with a valuated sales order stock, except in repetitive manufacturing environments
Engineer-to-order environments
Manufacturing orders that are part of a collective order
Joint production
Joint production is a production process that yields two or more products in a single production run. In the Product Cost Controlling component (CO-PC), there are a number of special processing requirements in joint production environments regarding Product Cost Planning (CO-PC-PCP) and Cost Object Controlling (CO-PC-OBJ).
In shop floor control, a manufacturing order (usually a process order) is created to manufacture co-products. In the manufacturing order, co-products are carried on the order items.
In Cost Object Controlling, actual costs are collected on the header of the manufacturing order. At the end of the period, the actual costs on the order header are distributed to the individual order items. Work in process and variances are calculated at the order item level. The order items are then settled.
Integration
In joint production, the system normally accesses master data of Production Planning for the Process Industries (PP-PI) such as the master recipe and materials list, or master data of Production Planning (PP) . To distribute the planned and actual costs to the co-products, the system uses the apportionment structure that can be specified the material master record or in the manufacturing order itself.
Terminology
Co-product
You specify that a material is a co-product by selecting the Co-product indicator in the MRP view or costing view of its master record.
Fixed-price co-product
A fixed-price co-product is a special type of co-product.
Primary product
You specify that a material is a primary product by selecting the Co-product indicator in the MRP view or costing view of its master record.
Process material
A process material is a nonstock material that is used in the R/3 System to represent the process by which co-products are produced. Instead of the primary products, you can enter a process material in the recipe header and in the order header.
Process materials have material type PROC.
By-product
A by-product is a product that is produced incidental to the production process of other products. You enter by-products in the material list of a primary product or process material with a negative quantity.
You do not set the Co-product indicator in the MRP view or costing view of the master records of by-products.
Intra material
Intra materials only exist temporarily between two processing steps. Intra materials appear in the material list as items of category M, but are not costed.
If the process is interrupted because of a malfunction, however, intra materials may have to be transferred into inventory. In this case they are valuated with a price in the material master that is selected through the valuation variant for the valuation of goods received.
Intra materials have material type INTR.
Circulating material
You can specify whether the cost of a circulating material should be included in the material list. The system selects a price for the circulating material from the costing view of the material master record.
If the circulating material is flagged as relevant to costing, the material costs appear in the itemization twice: once with a plus sign and once with a minus sign. The balance is the material input costs.

Integration PP-PM in REM

Similar Messages

Maybe you are looking for