Integration Process does not start

Hi guru's
My scenario is this. From ECC we send Idocs to PI. We have an integration process to receive the idocs because only max 9999 are passed in the port.
We run just around 11000 CREMAS idocs now.
The problem is that the integration process does not start on our QA environment while it does start on DEV environment.
I've run many checks on both environments and they all look the same.
To name a few:
* Cache are all green and up-to-date.
* I checked the WF models which are behind the Integration Process and they are the same.
* Event correlation is correct in both environments
* When i test the idocs are correctly sent from ECC to PI.
However on DEV I see in transaction SXMB_MONI_BPE i see that the integration process is triggered and started. It waits 10 minutes and collects any messages that come in, and then bundles these and sends them on to the receiver.
On QA i do not see the Integration Process being started. Only records i see in SXMB_MONI_BPE are three work items, 2 completed, 1 ready, all 3 are called waiting for event.
I'm probably missing some configuration somewhere but what could it be?
Regards
Robert

Hi Eng Swee,
Thx. I checked it already and it works fine.
Meanwhile i did do some changes and some retests and now i saw somewhere that all my tests were creating more steps in an already started integration process, that was still waiting.
I now cleared some old workitems and started afresh.
What i see now is:
1)  the BPM process start correctly
2)  it receives 1 or 2 or 3 or n messages
3)  it then waits for the deadline to finish, i.e. it should run for 10 minutes and then proceed to the next step which is sending the collected idocs to receiver.
On DEV the deadline works fine. On QA it doesn't.
IN SWU3 i have done the customizing and it shows green, so that part is OK.
Still the deadline is passed and it doesn't have the desired effect on mu BPM process (workflow).
Are there any other checks i can do to see if the deadline mechanism is properly working?
Is there a maybe a manual step i can do to trigger the deadline? Then at least i get some information on where the real problem is.
(Sorry for earlier confusion but i hadnt realized that there was still a process running)
Regards
Robert

Similar Messages

  • Service reads data but Bpel process does not start

    i have a very simple project. I have db2(as400) adapter and it reads data, i will receive data, transfom and send to oracle database. I deployed the project successfuly but when instance start i see the service reads the data but bpel process does not start and and there is no error. At the flow chart there is only readAS400 partnerlink, there is no bpelprocess. In the partnerlink i am usin polling, i read the data's with 1 and update to 2. It reads but dont update to 2.
    In deploy step and when instance starts there is no errors. But when i am deploying i get a warning but i dont know it's related with this situation.
    (Warning: property "activationAgent.readAs400.className" may not be understood by BPEL component BPELProcessEqpType - it will likely be ignored.)
    Do you have any suggestion ? Thanks in advance.

    check the recovery console, the bpel process possibly is going into manual recovery,
    Another thing you might wanna try is using checkpoints in your process..
    also, instead of getting the db adapter to instantiate the process, try a simpler process just to see if the db adapter is working or not..
    A normal process, which you manually instantiate from em console, with the db adapter in it after the recevie activity
    Edited by: AshishSharma on Jun 24, 2010 5:48 PM

  • Idoc to flat file using Integration process does not show up at all

    Hello All,
    I created a scenario IDOC to Flat File using Integration Process and one without IntegrationProcess. I am able to execute the one without Integration Process easily.
    However when I send the IDOC from SAP then the Integration Process scenario just does not work.
    I Checked SXMB_MONI  There is no entry for the Integration Process.I can see entry for other without Integration Process.
    SXI_CACHE : I can see my Integration Process active
    SWEQADM :  I have activated the Event Queue and Background job
    SWF_XI_ADM_BPE :  ALL BPE is showing green status.
    All syntax check on IP are fine.
    There is no Basis Help for me so  there could be some additional basis steps which need to be configured.  Has anyone faced such an issue with Integration Process?
    Regards
    Prashanta

    Hope this might help you. when u configure an IDoc as Sender with BPM this is how you proceed.
    <b>1<b>. let us split the scenario into two</b>.</b>
    a. <b>Sender to BPM</b> ( Integration Process).
    b. <b>BPM to Receiver</b>.
    <b>2. First let us configure the first Sender to BPM.</b>
    a. Sender Agreement( <b>Not required</b> ).
    b. Receiver Agreement( <b>NOT Required</b>).
    c. Receiver Determination( Sender Service, Outbound Interface, Receiver Service(<b>Integration Process</b>).
    d. Interface Determination( Inbound Interface(Sender Abstract Interface), Message Mapping(NOT Required if your using transformation stepin Integration Process)).
    <b>3. Now let us configure the Second BPM to Receiver.</b>
    a. Sender Agreement( <b>NOT Required</b>)
    b. Receiver Agreement( Sender Service(<b>Integration process</b>), Receiver Abstarct Interface,Receiver service, Inbound Interface).
    c. Receiver Determination( Sender Service(Integration Process), Receiver Abstarct Interface,Receiver Service).
    d. Interface Determination( Inbound Interface, Message Mapping(<b>NOT Required</b>)).
    So Finally we have <b>One Receiver Agreement</b>, <b>Two Receiver Determinations</b>, <b>Two Interface Determinations</b>.
    Please let me know if you have any more queries.
    Regards
    Gopi

  • Integration Process does not appear in ID or Runtime Cache

    I created an Integration process and it has not appeared as an available service in the Integration Directory when createing a receiver determination. It also does not appear in the runtime cache.
    Last week I created a different IP and that exists in both places. Between that time and now we migrated the SLD from one machine to another; I don't know if this will have an affect, but all messages interfaces created today appear in the Integration Directory, so there is a communication path at least.
    Can anybody advise how to proceed?

    Hi
    You should import the IP from IR to ID.
    In ID Goto Objects tab, here expand Service without party, you got the IP, from here you right click mouse>new>give some name and import your created IP in the IR.
    Then you get the IP in the ID.

  • The disp+work.exe process does not start - after a homogenouse system copy-

    Hi there,
    after a system copy from 4.6C (windows server 2003/oracle 10.2) to the same the database start and it is running fine but the when I try to start R/3 the process "disp+work.exe" stops after few seconde. The msg_server is running.
    Is this a problem of memory? Maybe you have a quick feedback?
    Thanks in advance
    HanseAtik

    Hi Sharad,
    Thanks for your reply. the problem was  the password of user SAPR3. Now I changed it vis sqlplus to sap and R/ can start.
    Now I am getting the problem that the saplicense is not valid - when I try to login to R/3. This is logic because its from the source system.
    My problem now is:
    When try install the saplicende vis: saplicense -install
    I get the error message:
    *SAPLICENSE (Release 46D) ERROR ****
    ERROR: Connect to Database failed
    Details: DbsIConnect failed with return code 18.
    Even "R3trans -d" failed.
    Any idea?
    Thanks in advance
    Hanseatik

  • I can't share my Final Cut X project : the process does not start. it seems that the project files is not found by the application. why ?

    I crate a project on Final Cut pro X. A 52 mn movie, that works really good on the time line. But I can't export it on DVD or IPad or other devices. The process is engaed but without effective effect. After one hour no result. It seems that the "project" files is not physically recognise by Final Cut export routine. Is anybody had such a bad surprise ?

    Tell everyone what type of video (format) you shot in the camera, what are your project settings and exactly what settings are you choosing when you use Share.

  • Integration Process Parameters not refreshed

    Hi,
    I have an integration process which takes parameters. You can configure these in the integration builder in the Integration Process Communication Component.
    I found that although I change these parameters , their new values are not taken into account in the integration process instances that are started after the change is activated.
    How can I force the integration process to use the new values ? Reactivating the integration process does not help.
    Actually, reactivating the integration process changes the integration process but the message mappings and operation mappings do not use the new values...
    I also completely flushed the cache but it does not help either...
    Thanks.
    Edited by: Thierry Dagnino on Sep 29, 2009 3:55 PM

    Have you also deleted the Integration Process in ID and reimported it?
    Regards,
    Prateek

  • GoldenGate Manager Does not start  - Windows 7 64-bit, 11gR1 database

    Hi Experts,
    I ran into very tricky situation and seeking for clarification and if possible solution for the same, here how it goes: (This is a practice setup for my knowledge and not production)
    My environement:
    GGSCI (msheth-work) 18> versions
    Operating System:
    Version 6.1 (Build 7601: Service Pack 1)
    Database:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE 11.2.0.1.0 Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    I have two database installed called gg1, gg2 on the same local system.
    I have two goldengate installation at following location: C:\gg1 , C:\gg2
    I was successfully able to start Manager, Extract and Replicate process with out creating windows services for manager.
    I read in discussion forum that it is recommneded to have different manager name and create services for them if you have multiple Goldengate installation in the same system. (Oracle Golden Gate installation
    Now when I create services using INSTALL ADDSERVICE ADDEVENTS, manager process does not start and manager report log and event viewer from windows shows following error despite of providing correct login details in manager parameter file:
    2012-08-23 10:42:31 ERROR OGG-00664 Oracle GoldenGate Manager for Oracle, mgr.prm: OCI Error beginning session (status = 1017-ORA-01017: invalid username/password; logon denied).
    GGSCI (hostname) 19> DBLOGIN USERID ggs_owner, PASSWORD ggs_owner
    Successfully logged into database.
    Manager Parameter File:
    PORT 7810
    USERID ggs_owner, PASSWORD ggs_owner
    PURGEOLDEXTRACTS C:\gg2\dirdat\ex, USECHECKPOINTS
    Your explaination and help will be highly appreciated.
    Regards,
    Mitul Sheth
    Edited by: 954634 on Aug 23, 2012 11:46 AM

    Thanks all of you to responding to my post, although I have bad news that I tried everything but it did not work. let me show you what all I have done:
    1) Adding windows services for manager
    GGSCI (msheth-work) 4> edit params ./globals
    MGRSERVNAME MGR1
    GGSCI (msheth-work) 5> exit
    c:\gg1>install addservice addevents
    Oracle GoldenGate messages installed successfully.
    Service 'MGR1' created.
    Install program terminated normally.
    When I try to start manager service either from GGSCI or from services.msc it gives same login error as mentioned earlier in the post.
    2) Using tnsnames while login into database:
    GGSCI (msheth-work) 1> edit params mgr
    PORT 7809
    USERID ggs_owner@gg1, PASSWORD ggs_owner
    PURGEOLDEXTRACTS C:\gg1\dirdat\ex, USECHECKPOINTS
    Just to make sure username and password is fine I login into database using GGSCI command prompt as follows:
    GGSCI (msheth-work) 4> dblogin userid ggs_owner@gg1, password ggs_owner
    Successfully logged into database.
    Hence, after making sure on all your suggestion I could not get it started and still situation is the same. I would need manager login into database becuase I have implemented DDL replication.
    Also, just by removing manager service from windows, same configuration without any change works like a charm. It just that for evey goldengate process a new window is create and it can't be closed. (If closed process dies).

  • Smartwatch 2 not working (update does not start, SW is stuck)

    Hello. I just bought SW2. I turned on NFC on my phone and placed SW2 on the back of my phone. Phone and SW2 made connection. SmartConnect was installed on my phone BUT then it wants me to install SW2 app (release date 13.12.2013). OK it installs the SW2 app and then progress bar appears on my SW2 and thats it. No progress at all. Phone just saying "downloading updates to SW2" but never starts. I waited two hours but nothing happend.
    I try to describe averything I have tried in detail, hoping so that someone can help me.
    I tried to use Sony Mobile Update service. I connected SW2 to my PC and Sony Mobile update service said that there is update available. So I do the update, SW2 restarts BUT then all starts over again. SW2 app is still trying to download updates but nothing happens. I tried to uninstall everything and reinstalling SmartConnect and SW2 app but that did not help.
    Then I used someone elses phone. I connected SW2 with other phone than mine, pairing worked, SW2 app managed to install the updates (this is where i got stuck with my phone) on SW2 and everything worked. Then I did reset on the SW2 and paired with my phone again. Pairing seems to work. Phone says that SW2 is connected BUT nothing really works. No notifications, facebook app does not show anything. Smart Music Player does not work, Smart Camera does not work. When I click on any app that needs to interact with my phone, a "waiting bar" appears for a few seconds and then nothing, silence. Whe I turn off the bluetooth on my phone, the SW2 app says that SW is disconnected and then I trun on the bluetooth, then it connects again. SW2 and phone seems to be connected but it seems that no information is moving between them. And then there is the battery drain. When SW2 and phone are "connected", the battery on my phone lasts about 3 hours max.
    So I tried the Sony Mobile Update service again. Suprisingly. update was available, even tough I did the update befoe AND with my friends phone. So i do the update again and now I am back where I started - my SW2 and phone are "connected" and SW2 app wants to install updates to SW2 but the downloading process does not start and I can not use SW2 without it. So I need my friends phone again just so that I can use SW2 as a regular watch.
    My phone:
    LG-P940 (Prada 3.0)
    Android 4.0.4 ICS
    I have heard that people with LG phones are experiencing the same issue...

    It seems that we are suffering from the same problem I also have an LG phone aswell.

  • 10.4.1 update does not start.

    Hi, everybody.
    I've just checked for some possible updates on my iTunes (running on Windows).
    But if I click the proper buttons to start the download (as I'm always used to), the pop-up just minimizes and appears once again after a few seconds; so I am supposed to click once again the same button, but the process does not start and the pop-up appears again.
    Is there anyone who might help me please?
    Thanks.

    I have had problems with MS Word after two other OS updates (including 10.4.6). This may not work for you; however, it did for me (and it was what MS advised me for my font corruption indication problem): Re-boot holding the shift key down (to perform a Safe Boot). Hold it down until the red "Safe Boot" nomenclature is seen on the log in screen. Starting up in a Safe Boot clears the font cache automatically. Then, just re-boot normally. This might work. If not, no gain, no loss. Hope it helps you.
    Barry
    PowerBook G4 & PowerMac G4   Mac OS X (10.4.6)  

  • Dispatcher process on ABAP +  JAVA system  does not start.

    Hi all,
    Dispatcher process on ABAP +  JAVA system  does not start.
    Can someone help me to solve this issue in a ABAP+JAVA stack system?
      service p4 ================= ERROR =================
    Core service p4 failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
    s (errno:227)
    com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket.', Arguments: []--> : Can't find resource for bundle java
    .util.PropertyResourceBundle, key Can't assign requested address (errno:227)
    com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket.
            at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
            at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
            at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
            at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
            at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
            at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
            at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
    com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
    s (errno:227)
    com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket.', Arguments: []--> : Can't find resource for bundle java
    .util.PropertyResourceBundle, key Can't assign requested address (errno:227)
    com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open  server socket.
            at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
            at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
            at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
            at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
            at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
            at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
            at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
    [Framework -> criticalShutdown] Core service p4 failed. J2EE Engine cannot be started.
    Nov 9, 2011 6:41:09 AM              com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:6]_26] Fatal: Critical shutdown was invoked. Reason is: Core
    service p4 failed. J2EE Engine cannot be started.
    Please let me know if you need any further information in this regard.
    with regards,
    Raja

    Hi,
    Core service p4 failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
    Please reboot the server to free up occupied ports. Later start the sap system.
    Regards,
    Deepak kori

  • I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning.  How do I fix this?

    I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning.  How do I fix this?

    adam@honestmusky wrote:
    Yes I am using encore.  I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
    How about some DETAILS?
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Also describe the EXACT steps you take to go from Premiere Pro to Encore

  • When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

    Hello,
    When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
    What does that mean?
    Thanks in advance for fixing my problem.

    I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
    EDIT: Here, this might help: http://support.apple.com/kb/ts1567

  • Integration Process is not displayed in SXI_CACHE

    Hi Experts,
    I am getting the below eror when I try to excute the SOAP -> JDBC BPM scenario
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>No receiver could be determined</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
    The integration Process is not displayed in the SXI_CACHE. Done with all type of cache refresh, restarted the server also.
    What could be the problem?
    Earlier I was getting the similar error for non-BPM scenario, just refreshed the cache in Admin, IR, ID and in SXI_CACHE and it solved the issue.
    But here the Integration Process is not displayed after doing the above step.
    Note: Always the SXI_CACHE is in ERROR status(Red color symbol)
    Everytime before executing the scenario,  I refresh the cache in SXI_CACHE. Once I done with the refresh, I get the belwo status
    1. Cache contents are being refreshed (Yellow color)
    2. Error during last attempt to refresh cache (Red Color)
    Please share your suggestions to solve this issue.
    Regards
    Sara

    Hi Sara
    Go to SXI_CACHE , then from Menu XI Runtime Cache choose Start Delta Cache RefreshF6. Try this, , After clicking wait for sometime to refresh.
    Path Prefix set to “/dir/CacheRefresh”.
    https://websmp204.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
    Also check out the role of the user using SU01. are you using PIISUSER?
    Also refer:
    How to handle cache in PI - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
    Thanks

  • Integration Process is not displaying in SXI_CACHE

    Hi all,
    My Integration Process is not getting displayed in SXI_CACHE.
    After configuration when I executed the scenario ..it went in to error "NO RECEIVER FOUND"
    when i checked in SXI_CAHE the cache contents are not updated.
    My Integration Process is not displaying in SXI_CACHE .....in not there in the list,this is the frist BPM in this machine.
    Inside IR the Integration Process is activated with no error.(F7).
    What is wrong with my configuration, have any one faced the same issue?
    Thanks for your time and reply.
    Regards
    Sunil

    Hi Sunil,
    Go to SXI_CACHE , then from Menu XI Runtime Cache choose Start Delta Cache RefreshF6. Try this, , After clicking wait for sometime to refresh.
    Path Prefix set to “/dir/CacheRefresh”.
    https://websmp204.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
    Also check out the role of the user using SU01. are you using PIISUSER?
    Also refer:
    How to handle cache in PI - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
    Also check
    Does PIISUSER have the role SAP_XI_IS_SERV_USER_MAIN. Is profile generated for the role?
    See SAP Note 1030255.
    Some more advices:
    1.Go to Environment -
    > Click on Clear SLD data cache.
    2.Tools -> Cache Notification
    You will find at that there will be some red dots if u refresh
    Please click on then and refresh once again
    Regards,
    Vinod.

Maybe you are looking for