Integration Process in Integration Scenario

Hi All,
I am trying to create an Integration scenario which can be used at configuration time to create all the config object. But during configuration time, in Assign Services step in Integration Scenario Configurator, it is only showing Business Systems under the product, previously configured in SLD. But i want to use the Imported Integration Process as the sender service. Is it possible?
Also the Assign Service screen is showing Assign Business System Services for A2A configuration. But we are using B2B configuration sometimes. So is there any way to do this?
regards,
Biranchi

Hi
Thanks for the reply. The above switch problem is solved. But now I am facing a new problem. I am making a synchronous call to BAPI from my BPM. How can this be implemented in Integration Scenario.
So how can I send a input message from BPM to BAPI and then take further steps only after getting response from BAPI. Is there any way to define synchronous Action??? And another point to be noted is that we are not using any communication channel to send the message from BPM or receive the response in BPM. We have only a receiver communication channel which receives the message for the BAPI.
So please help in solving this problem.
regards,
Biranchi

Similar Messages

Need Integration Process to the scenario

Hi All,
I am doing one scenario Webservice to JDBC (Sync to Sync). Here i have one doubt, there any Integration Process required for this scenario. Completely I configured scenario without using BPM right now. I haven't tested the scenario also.
1. BPM is required for my scenario or not?
2. So please tell me when the BPM will come to the picture?
Thanks,
Satish.

HI,
Ihope BPM not required to this type of scenarios. BPM required if you have sync - asyn , vice also some times and see the checklist for BPM inthe below link
see the below links to get an idea..
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Regards
Chilla
reward points if it is helpful..

Integration Processes within Integration Scenario

The process I need to model is as follows:
SRM XML PO => OAG XML PO => Embeded OAG XML PO in another message.
I have looked at trying to use an integration process to handle the first conversion and then a regular interface mapping for the 2nd. However despite creating the Integration process in the same software component as the Integration Scenario I get nothing in the drop down list when searching for the Integration process in the Application Component definition. Even if I try to create a new integration process from within the Application component I get an error saying that the SCV of the integration process and the SCV of the Application component are not the same
Does any one have any suggestions

Hi Rajasekar,
       Hope u do fine.
   Ur not mentioned any of ur requirement.
   In BPM scenarios only we can create the INTEGRATION PROCESS.
   In REPOISTERY--> we can design the INTEGRATION PROCESS.
   In DIRECTORY--> Service can installed the Directory.
Regards,
sateesh N.

What is integration processes and integration scenario?

hi experts,
1.What is data type enhancements?
2. What is context objects?
3. what is External definitions?
4. What is mapping templates?
Please reply me as soon as possible.
thanx,
murali.

Hi,
A message defines how the message that the user receives is structured. The message template contains a URL to a BSP application (Business Server Page). This creates the messages. You can define separate BSP applications and specify them in the message template (see also: Changing the Message Layout).
When you assign a message template to a category, you can define your own message template for each level of granularity and delivery type (see also: Granularity of Messages). You can also use the same message template for different levels of granularity and delivery types.
Activities
1. To define your own message template, navigate to the Message Template screen:
a. In the toolbar, choose New Entries.
b. Enter the name of a message template.
c. Specify the relative URL for the required BSP application and the handler class.
2. On the Assigned Message Template screen, assign the message template to the required category.
You can assign your own message template for each delivery type and level of granularity.
a. In the Customer Namespace column, enter either Z or Y.
b. Select your message template.
The specified message template overrides the standard message template shipped by SAP.
2.Context object
Context objects are a simple alternative to XPath expressions for accessing the contents of a message.
Creating context object : http://help.sap.com/saphelp_nw04/helpdata/en/3f/9ddca372cbf146bdcdf54db7737623/content.htm
Activities
1. Create a context object on the design maintenance screen of the Integration Builder 2. Select a built-in XSD data type for your context object by using the Reference Type list box and save it.
3. Open the interface that you want to assign a context object to in the Integration Repository. You can only assign context objects to the request message of interfaces in the same or in a superordinate software component version.
4. To assign the context object to a request message field, enter it in the Context Object column by using the input help. For message interfaces, the structure of the request message is displayed on the Context Object tab page.
5. If you want to undo the assignment of a context object, select the name of the context object and choose Delete Context Object Assignment ( ).
6. Activate your changes.
3. External Definitions :
An external definition enables you to import a local WSDL, XSD, or DTD file to the Integration Repository and specify which parts of the schema to extract as the description for a message. You can use these extracted message schema as:
● Output or input messages in message interfaces
● Source or target structures for message mappings
http://help.sap.com/saphelp_nw04/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm
I hope this has helped you.
Pls : Reward points if helpful.
Vishal

What is integration scenario & integration process in IR?

hi friends
1). can any one explain me about Integration scenario and Integration processes in "INTEGRATION REPOSITORY"?
2). why we need to use this IS & IP(integration scenario and integration processes?
3). what is advantage of using IS & IP(integration scenario and integration processes?
if you have any related links and documents please refer to me..................
Thanks in Advance
chinthapatla.bharat

Hi Bharat,
Integration Scenario
An integration scenario completely models the exchange of
messages for a collaborative process and provides an overview of the process flow.
It is overview of your whole integration scenario. In Integration Scenario each Swimlane represents a different business system. Mean you will have number of swimlanes as number of business system involved in your integration. Swimlane contains action. Actions are used for mentioning Inbound and outbound interfaces for the corresponding swimlane(business system).
Why we are using Integration Scenario?
We use integration scenario to genearate Integration Directory objects like Receiver Determination, Interface determination, Sender agreeement etc.
All XI content objects must be assigned to one or more integration scenarios (IS). Delivering XI-Content in the framework of an IS has the following advantages:
1. The IS provides you with a central point of access for all integration objects. This is necessary for semantic and technical integration and facilitates business-driven development.
2. The IS helps customers to understand the underlying business scenario of XI content objects.
3. The IS serves as a kick-start for the configuration of the content at the customer site. The aim is to minimize the configuration effort for the customer.
Please go through this link for further reference:
http://help.sap.com/saphelp_nw04/helpdata/en/88/7adb7a030b424b8ef29b99461e52a8/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ec/21ee117a909f44a8b69794b9ed6221/frameset.htm
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
How Tou2026 Implement a High Volume Process Integration Scenario
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9056c89c-1a2e-2a10-8a99-eae154e74c4e
Integration Processes
An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.
You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
the following case,u should consider to use integration process.
1.Control/Monitor the messages in XI
2. Collect/Merge the messages in XI
3. Split the messages in XI
4. To Multicast an Message
5. Send an Alert based on the very complex business logic
6. To integrate with cross component business process
Please go through this link for further reference:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f7/d4653fd1d3b81ae10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
Some more additional links:
1. what is integration processes and integration scenario? and the functionality of these??
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
/people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
http://help.sap.com/saphelp_nw70/helpdata/en/ae/fb72dc1d0fbf4391fba23b7e8a0d55/frameset.htm
2. what is Actions?
An action represents a function within an application component that is not subdivided further. Actions subdivide the process flow of an integration scenario.
The vertical progression of actions from top to bottom corresponds to the logical process flow.
http://help.sap.com/saphelp_nw70/helpdata/en/ae/fb72dc1d0fbf4391fba23b7e8a0d55/frameset.htm
3. What is message interfaces in interface objects of IR?
http://help.sap.com/saphelp_nw70/helpdata/en/ae/fb72dc1d0fbf4391fba23b7e8a0d55/frameset.htm
4.what is fault message types exactly and functionality?
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
Regards,
Vinod.

SOAP to EMAIL and sending the response to SOAP by integration process

Hi,
I need to design a scenario from SOAP TO EMAIL and based on the status of the EMAIL being sent i need to send the response to SOAP using integration.If it is SUCCESSFUL message i need to send success and if the mail is not sent i need to send error .
could some one help how to design the Integration process for this scenario?will help me what steps i need to use for this .
Thanks
Rajesh

Hi Rajesh,
You can achieve this by making synchronous Interfaces.
1) create Synchronous Outbound and Inbound Service Interface.
2) So you will need to create a response mapping as well.
You get a response from mail adapter in the following format, use this as response Message Type:
- <xim:MailReceipt xmlns:xim="http://sap.com/xi/XI/Mail/30">
<Server>smtp://xx.xxx.xx.xx</Server>
<Greeting>wlg-exht2.XYZ.com Microsoft ESMTP MAIL Service ready at Fri, 28 Jan 2011 20:10:28 +1300</Greeting>
<Format>XIALL</Format>
<UseMailPackage>false</UseMailPackage>
<Encoding>base64</Encoding>
<Subject>Sync Test</Subject>
<From>"From e mail address</From>
<To>"To e mail address"</To>
<Date>2011-01-28T07:10:29Z</Date>
<MailID>1.2.3</MailID>
</xim:MailReceipt>
By this I think you can give the status of Mail.
Regards,
Aravind

R3 to File with integration process- need help

Hi all,
Can you please help me with the steps involved for the following scenario:
IDOC(R/3) to XI(integration mapping is done here) then to file.
I have selected an idoc (MATMAS).
I have created a business systems (R/3)
I want only few fields from R/3(MATMAS) to send to file. So, I do the mapping in integration process.
In the config, I don't know how to link this thro' integration process.
Can anyone please help me with the steps.
I appreciate all your efforts.
Thanks
felix.

Felix, I can think of the foll. steps, try it and let know if it helps
1) One receiver determination parameters -> BS1(R/3) - sender service , MATMAS - sender interface , receiver system - Integration Process(this integration process you will 've to import from Integration repository)
2) Now you will create an interface determination for the above receiver determination , ere you will specify the Abstract interface(referred to, in ur container object in receive step of IP). Interface Mapping is not reqd , since MATMAS is received as MATMAS ere without any change.
3) second receiver determination parameters -> Integration Process - sender service , Abstract interface used in the send step of IP - sender interface , receiver system - Business system/service that has the file commn. channel configured
4) Now you will create an interface determination for step 3, ere you will specify the Asynchronous inbound interface used by the file adapter & the mapping program to be used(optional)
5) Now you will create a receiver agreement to associate ur async inbnd interface with the Commn channel(file adapter).
-Saravana

Integration Process and Action

Hi everyone,
Can some one explain about why do we need to create Action and Integration Process in ESR and use this Integration Process in Configuration Scenario.what's the use of creating this?

Hi ,
Sorry I misunderstood your query.
Go through below link for apt answer.
Action objects in ESR | SCN
Are the action objects are really required to be created
No
Are there specific advantages of using action objects and Process integration scenario objects
This approach is more model based approach wherein you model the process flow and then go for implementing the actual scenario. Technically you won't find any difference in scenario execution.
Regards
Venkat

Send IDoc to R3 in Integration Process

Hello everyone,
I want to send some idocs to R3 system's vender from XI Integration Process, but i do not how how to configure in the adapter-specific identifiers. If i set the Idoc Adapter Logical System, the idoc went to the logical system, if i did not set the logic system, it raise an error "Unable to convert sender service BS_SAP_R3 to an ALE logical system". So how can i configure the Integration Process in Integration Directory to send idocs to R3 system's vender?
Regards,
Nick

Hi Nick,
Look at these threads please..
Configuring to receive a iDoc in R/3 sent by XI
How To use External Message To Send IDOC From XI To R/3
Hope these help you!
cheers,
Prashanth

Integration Processes

Hi,
Can any body please share some knowledge about how to create an Integration Process in Integration Repository. Any help would be appriciable.
Thanks,
Kulwant Singh

hi
An integration process is an executable process that you use to control complex cross-system business processes.
Integration processes are based on the exchange of XML messages. Integration processes provide SAP NetWeavers message-based process integration with functions for the stateful processing of messages. They enable you to define control structures, such as loops and parallel processing branches.
An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.
You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
If u Want full doc give me u r mail id.
Thanks

Unterstanding Integration Processes

Hello
I got some problems understanding SERVICES.
There are several Services:
1) service INTEGRATION PROCESS:
- An integration process is an executable, cross-system process for processing messages
2) service BUSINESS SYSTEMS
Business systems are logical senders or receivers that exchange messages
3) Service: BUSINESS SERVICE
A business service represents an abstract unit for addressing the senders and receivers of messages. You can use a business service to group interfaces
In my opinion all services to define in XI are INTEGRATION PROCESSES?. An within this service INTEGRATION PROCESS a service BUSINESS SYSTEMS or a service BUSINESS SERVICE could be the sender or receiver of the message?
Why is the hierarchie:
-->service INTEGRATION PROCESS:
-->service BUSINESS SYSTEMS
-->Service: BUSINESS SERVICE
And NOT:
service INTEGRATION PROCESS:
|-->service BUSINESS SYSTEMS
|-->Service: BUSINESS SERVICE
Thanks Regards, Mario

Hi Mario,
each service stands 4 a connected system.
The normal case is Business System with SLD entries.
Quick and dirty is Business Service without SLD entries and without connection to Products, so that u have no good help in IB Configuration. They r useful only 4 special cases and tests.
Integration Processes r controlling processes running at XI. They can send and receive messages, do mappings, wait for messages and so on.
Regards,
Udo

Integration process in File to BPM Scenario

hi,
gud morning. i got a problem while designing a BPM. in designing the integration process in IR, i am not able to get both the abstract interfaces to select from, while defining the container. plz post a solution for this. thank u.

Hi,
In this blog, I have used Business Service created in the integration directory.. This is an abstract . So I need to specify , the Sender and Receiver Interfaces explicitly in the business service. and it doesnot have any entry in the SLD.
But if you create the Business System in the SLD and if you import that into the Integration Directory-->Assign this into your configurations scenario, then this step is not required.
Regd. Importing Integration Process- BPM is kind of Abstract Service.. i.e BPM is acting as a Receiver Service and Sender service both..
i,e Source to BPM ( here BPM is a Receiver)
BPM to Target( here BPM is a Sender Service)
Hope this clarifies..
Regards,
Moorthy

Sync/Async BPM scenario : Problem at Integration Process..!!

Hi All,
I am doing Sync/Async BPM scenario.
start ->Receive(Request)> Transformation(Responsemap)>Send(SendtoR/3)->Send(Send Response) ---> stop.
When Iam trying to Activate, Integration process giving errors as
Source parameter AA_Payment_Req | http://XXXXXXXXX.com/SAP_PI/DirectSales/Payment not set Target parameter AA_Payment_Response | http://XXXXXXX.com/SAP_PI/DirectSales/Payment not set
Warning: Container element Response is defined but is neither initialized nor used.
But I am using them in the BPM. The same kind of scenario is working for another interface which is already running in production. When I tried to check that interface it is showing only Warning message as Container element Response is defined but is neither initialized nor used.
I tried deleting and creating again and still it is showing the same error.
Can anyone please suggest what might be the problem.
Regards
Deepthi

Hi,
could you pls let me know how its solved, while i am trying the same i am also getting the same problem..
could you pls explain bit more on this.
Thanks,
Venkat.

SRM7.0-No standard Integration Scenarios & Integration Processes & Msg Map

Hi,
In Integration Repository of PI, for s/w component SRM 7.0, there is no standard 'Integration Scenarios & Integration Processes' & standard 'Message Mapping' in any of the namespaces. But in SRM 5.0, it 'Integration Scenarios & Integration Processes' are there like...
Plan_Driven_Procurement_SupplierEnablement &
Service_Procurement_SupplierEnablement
Pls help.
Thanks in advance,
rgds,
balu

Hi
Please check the proxy services under the name space "http://sap.com/xi/SRM/SE/Global" . SAP note 1263876 may help you in finding the right service for your scenario.
Thanks
Kiran

Integration Scenarios & Integration Processes

Can somebody please explain me what are the "Actions" and "Integration Scenarios" for in Integration Scenarios & Integration Processes? I understand that " Integration Processes" is for creating BPM processes.

HI Vijay
Please see the below links.
For Actions :
An action represents a function within an application component that is not subdivided further. Actions subdivide the process flow of an integration scenario
Internal Actions : Defined for a separate software component version.
You can use internal actions in application components (of type Product Version or Main Instance) that (by using the product version) contain the same software component version in which the action is implemented.
External Actions : Defined for a software component version of a partner or for templates.You can use external actions in application components (of type Template or Product Version) that (by using the product version) contain the same software component version in which the integration scenario is implemented.
Two XIu0092s in same scenario
http://help.sap.com/saphelp_nw04/helpdata/en/68/88a440df800160e10000000a1550b0/frameset.htm
For Integration Scenario :
An integration scenario completely models the exchange of messages for a collaborative process and provides an overview of the process flow. The integration scenario provides you with a central point of access for all objects that you require for semantic and technical integration
/people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
Regarding Business scenario's in XI
XI scenarios
See the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
Cheers..
Vasu
** Reward Points if found useful **

Integration Process in Integration Scenario

Similar Messages

Maybe you are looking for