Intel iMac with failed LogicBoard - can I use it as display for my MacMini?

I have a Intel iMac with failed logic board (the display comes up while booting sometimes and sometimes, it doesn't). I bought a Mac Mini afterwards. I connected it to a Dell monitor with HDMI and the results aren't great. I experience interminttent video losses (Grains on screen every 1 minute or so).
So, I am now thinking about using my failed intel Imac as a display. Will it work?

No, the failed imac is dead until you replace the logic board.

Similar Messages

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

  • I have new iMac with Lion installed; can I get a free upgrade for my MacBook Pro?

    Hello
    I recently bought a 27" iMac with Lion installed.  Should I be able to download the upgrade for my MacBook Pro without paying.  If so what should I do.  If I go to the App Store I'll end up paying £20.99
    Any help gratefully received
    margaret

    Margaret,
    No you will need to purchase the upgrade. However if you own other Macs you want to upgrade once you have purchased Lion then you can upgrade the additional machines. Of course the additional machines must be using the same Apple ID. As long as the additional machine's meet the minimum system requirements listed below you are all set.
    General requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.

  • [10.7.5] Since update, I can only use 1 mirrored display for audio output at a time.

    Before the most recent update (to 10.7.5) my 2010 Mac Pro (2x2.4GHz Intel Xeon w/ dual DisplayPort video card) had no problem sending both audio & video to my 2 mirrored HDMI displays, but now it will only send audio to one at a time, depending on which one is selected in the Sound System Preferences window.
    This is kind of a big deal for me because the two displays are located in different rooms and viewed simulataneously by different people.
    I know other people have been having audio problems since this update too.
    Anybody know of a workaround or a way to contact someone at Apple who could see this get fixed soon?

    I have no idea how to do what you're doing using those GUI tools (nor, likely, will anyone else here). When I used to need this I just loaded module-combine and set it as the default sink (did it in /etc/pulse/default.pa though you should be able to do it for only your user in ~/.pulse or something).

  • Can the new iMac be used as a display for my mid 2010 MBP?

    I am considering buying a 2011 iMac and was wondering if the new iMac can be used as a display for my mid 2010 MBP.
    I know that the new iMac has a thunderbolt display ports, and my macbook pro does not.

    You're referring to Target Display Mode Mid 2011 iMacs  this letter will explain how it works or in your case will not work () with your mid 2010 MBP. Sorry to be the bearer of bad news.

  • Microsoft Office 2004 (Word) unable to save files  I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

    Microsoft Office 2004 (Word) unable to save files
    I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
    So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
    How can I get rid of this error message?

    Look, I realize you might have to get your machine working, so this is how you revert back.
    Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
    #1 Backup your personal data off the machine.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Reinstall OS X 10.6 from disk
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk  of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #4 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    That's it really.

  • Anyone using a NEW intell iMac with Logic?

    I've got many great responses on both sides to my question regarding my quest to determine which machine to use with Logic -- new Mac Pro (the ultimate) or new iMac (likely cover my bases for a long while and save major cash now). One point raised against iMac was fan noise smack dab in the middle of the listening field with the older iMacs. So a sub question to my original is this:
    Are there any NEW intell iMac users out there who are using Logic? Is fan noise a problem? Generally, how do you like the iMac's feasibility as a music workstation with Logic? How many tracks/effects are you running and how is it working for you?

    Before those concerns are completely alleviated, go over to the iMac hardware forum and do a search for firewire issues. Like actual physical problems with the jacks on the 20" iMac and having drives just completely "disappear".
    the reason you will find issues including firewire ones on the imac forum is because it is a forum for people with issues. it may or may not be the case that there is a subsantial issue with FW on the intel imacs, but obviously people who are having issues are going to pop up there making it seem like everyone is having an issue.
    for certain types of music production, an imac would be completely unsuitable. but for others it will be ideal.
    there drawback of having 800 and 400 FW bus shared is that if you have a 400 device it will slow down 800 devices to 400. that means it would be ideal for impiro to have either both FW drive and interface as 800's or not go to any further expense of getting an 800 hard drive to use for audio since he would not beneift from the speed.
    not a great big deal IMO.
    iMac DOES lack expandibility, but it doesn't lack horses. actually i would say (and have said) that impiro would do better with an older tower to allow for expandability because he doesn't need that many horses to do what he needs to do. and i certainly feel that it is unnecessary to spend money on a computer that would be better spent on other things relating to the move to computer based music mixing.
    never-the-less, the kind of live musician-audio-based music impiro is going to be making is childs play for modern computers. he will be able to run loads of tracks and plug-ins before a new imac will even break a sweat. even with an interface and a FW drive on 1 bus running at 400. he just won't be able to run loads and loads.
    and man....even if he decides to get more heavily into it and start buying third party cards and this that and the next thing he can look at the next computer being a tower. personally, i am changing my computer every 3 years or less - it'll take him at least that long to find the ceiling on a new imac.

  • I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

  • I want to upgrade iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with the 15" MacBook Pro that totally died, and upgrade iMac from that DVD

    I want to upgrade my iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with my purchase of the 15" MacBook Pro that totally died, and upgrade the iMac from that DVD that came with the laptop ?   Thanks

    No, that 10.6.3 DVD is system specific to the MacBook Pro.
    You need a Snow Leopard Upgrade > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
    or if a MobileMe users > Apple throws MobileMe users a free version of Snow Leopard

  • I have a powerbook G4 with macosx10.5.8 (as far as I know the latest possible OS with powerPC). Can I use Time Machine to restore my data on an Intel Macbook?

    I have a powerbook G4 with macosx10.5.8 (as far as I know the latest possible OS with powerPC). Can I use Time Machine to restore my data on an Intel Macbook?

    Well the newer TimeMachine model as stated in current Support pages isn't directly compatible on OS X 10.5 now, as noted in above link provided.
    What OS X does your newer MacBook have running in it? (Not linux?)
    With the current setup you have there may be a way -among other details in the support page- to do the migration of data from Mac, including a subnote on Time Machine, in a section below the main article with triangle by it,  from links here:
    •OS X: How to migrate data from another Mac using Mavericks 10.9:
    http://support.apple.com/kb/HT5872
    •OS X: How to migrate data from another Mac using Mountain Lion 10.8 and Earlier:
    http://support.apple.com/kb/ht4889
    In the support articles there are various troubleshooting and help items about the technology, some data back some time and whatever still stands would be there. Some archives are no longer current and say so.
    Perhaps someoone still using older PPC Macs and Leopard 10.5, will say how to backup into a G4 PowerBook, from a Time Machine.
    Unless the TimeMachine backup from the older PPC G4 PowerBook is used in the migration process of transferring personal account files from there to a new MacBook running (?) OS X. This probably could be done. You may be able to access older libraries, such as iPhoto, iTunes, etc and import them from the archive, to a newer Intel-based MacBook.
    Sorry for any confusion.
    I'll more carefully reply in the future.
    Good luck & happy computing!
    PS: a different direction on archives, time machine, clones, and other devices:
    •About Time Machine - Time Machine vs. Clones and Archives:
    http://pondini.org/TM/Clones.html
    •Apple OS X and Time Machine Tips:
    http://pondini.org/TM/Home.html
    {edited to add link details}

  • If I replace my desktop iMac with a laptop, can I still use the desktop as a screen on occasion?

    I'm planning to replace my existing iMac and old MacBook with a new Macbook pro. This would be my first time without a dedicated desktop computer. I was wondering if it would be possible to easily hook up my laptop to the old iMac and use it as a larger monitor for those times I want the big screen.

    Late 2009 and Mid 2010 27-inch iMacs, and Mid 2011 and Late 2012 iMacs can be used as external displays > http://support.apple.com/kb/PH11302 Late 2009 and Mid 2010 21'5-inch iMacs and older iMacs can't be used as an external display.
    If you have a Late 2009 or Mid 2010 iMac, buy a Mini DisplayPort cable to connect your MacBook Pro to the iMac, and press Command and F2 keys on the iMac. If you have a Mid 2011 or Late 2012 iMac, buy a Thunderbolt cable.
    If you have an iMac which isn't compatible, use an application like ScreenRecycler, which allows you to use your iMac as an external display

  • 20 inch Intel iMac with 512 MB RAM:  is an additional 512 or 1 gB stick bet

    I have a stock 20 inch Intel iMac with 512 MB of RAM.
    I've read that this computer uses dual channel RAM, so I am wondering whether an additional 512 MB of RAM or an unsymmetrical 1 GB RAM stick would be better?
    Also, anyone know who makes the OEM 512 MB stick and where to get compatible memory for my iMac?

    "anyone know who makes the OEM 512 MB stick and where to get compatible memory for my iMac?"
    Regardless who made your OEM module, it will have a label with their name and the product specs (or at least a product number, which, on a page at their website, can be decoded for its exact specs).
    Mine was made by the U.S. company Micron Technology at their Singapore factory, and the label states that the module is lead free. A similar Micron module can be purchased online from Micron's wholly owned subsidiary Crucial Technology, which is their retailing arm. Retail customers can not order directly from Micron, just as they can not order directly from either Samsung or Hynix, the other two large OEM RAM manufacturers.
    "I am wondering whether an additional 512 MB of RAM or an unsymmetrical 1 GB RAM stick would be better?"
    I agree that more RAM is better, will make it snappier, and prefer to buy my 1GB stick of RAM from Crucial, as I know it will be compatible for my Mac and its OEM stick (regardless of the maker) as long as I use their online Mac selector tool.

  • I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?

    I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?

    No. Target Display mode is only supported when connected to a Mac running 10.6 or later.
    It cannot be used with a PC, bootcamp, gamaing console, cable box, DVR or PowerPC Mac.
    http://support.apple.com/kb/ht3924

  • My Intel iMac with 4 ext, daisy chained drives freezes up sometimes. If I unplug all drives there is no problem. Also Disk Warrior gives me the error msg,that in Time Machine, (which is on a lg. (1TB ext. HD) error msg me that there is not enough memory

    My Intel iMac with 4 ext daisy chained drives freezes up sometimes. If I unplug all drives there is no problem. Also Disk Warrior gives me the error msg (2154) that in Time Machine, (which is on a lg.(1TB ext. HD only 1/4 used space) error msg me that there is not enough memory. I am using Lion 10.7.2.

    My Intel iMac with 4 ext daisy chained drives freezes up sometimes. If I unplug all drives there is no problem. Also Disk Warrior gives me the error msg (2154) that in Time Machine, (which is on a lg.(1TB ext. HD only 1/4 used space) error msg me that there is not enough memory. I am using Lion 10.7.2.

  • IMAC 2010 which HDD can I use to replace the malfunctioned Seagate Barracuda 7200.12 1TB?

    iMAC 2010 which HDD can I use to replace the malfunctioned Seagate Barracuda 7200.12 1TB?

    After doing a bit more research, the 2010 iMacs do appear to have a third cable connecting to the  hard drive, for the internal temp sensor.  This would appear to be the block of 8 pins that are on almost all drives, but they are normally intended for jumpers.  Unfortunately I was unable to find any documentation or specs that would indicate this pin block connects to the internal temp sensor on either standard (non-Apple) WD Black or Seagate 7200.12 drives.
    I did find some info that may be of some use:
    WD: Where to connect an external temperature sensor to a Serial ATA or EIDE hard drive.iFixit: Replace the hard drive, how do I connect the hard drive thermal sensor?
    Apple Technician Guide: iMac 2010 27" (mid-2010)
    Various discussion threads I found through google searching indicated some people succeeded with installing an external temp sensor on the body of the drive.
    Sorry I couldn't help more.

Maybe you are looking for