INTER CO /DEBIT MEMO
in case of inter company billing is it possible to create both debit/credit memo....?if not why...
hi
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.
nagesh
Similar Messages
-
Excise invoice with reference to credit memo/debit memo
Normally we create Excise Invoice with reference to Inter company Invoices . Is it possible to create Excise invoice w.r.t. Credit Memo/ Debit Memo. If Yes , then what are the settings that needs to be maintained and where?
Excise JV thru J1IH transaction is one option. It gives you 6 options.
1.Material Doc for written off
2.materail doc for non production
3.Additional Excise
4.Other adjustments
5 TR6 Challan
6.Cacel Excise Invoice -
Excise invoice creation for Debit Memo or Credit Memo
Dear All,
I have to create Excise Invoice J1IIN with reference to Debit Memo in Differential Invoice Senario.
When i goto J1IIN it shows Customization for Document is missing in table Billing Reference type.
How to create Excise invoice for Order related billing.Plz solve my problem.
Award Pts for useful answers.
Thx & Regards,
PankajCIN Configuration for Excise Invoices in case of RETURNs
Basically CIN is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure ofData ScreenMaterial Master Configuring the Material master Screen Sequence.for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
rewards if it helps -
Error while creating Billing doc using VF01 for Debit memo req. from RRB
Hi,
I am creating billing doc for my Debit memo req. which is created using RRB(DP90, DP95).
Error message - Item 000010 does not exist.
When I debugged and looked into code it seems following lines are causing problem.
Program
LV60AA28
Line u2013 734
IF vbap-vkgru EQ vkgru_dyn_posten.
IF vbap-aufnr IS INITIAL .
set AUBEL because it was overwritten by VBAP-VBELN
vbrp-aubel = vbap-vgbel.
vbrp-aupos = vbap-vgpos.
vbrp-autyp = vbap-vgtyp.
This code was not in 4.6 system.
We have just migrating from 4.6 to 6.0 and facing this issue while testing.First of all you should try to learn how to express in a public forum like this.
On your comments
Do some ground work from your end
why should I ?? if you want you can do ground work or any work. If you post a question, you have to hear patiently all suggestions and dont scribble whatever you want.
You should have some basic
understanding of SAP ABAP.
You should have posted this question ABAP forum !!!! Why without any sense you have posted in sales forum ?? -
BAPIs to create sales orders for Returns and Debit Memo Request
Hi,
I have to create a sales order for document type Returns as well as a debit memo request.The BAPI 'BAPI_SALESORDER_CREATEFROMDAT2' is giving the following error message for Debit Memo Request document creation as well as for Returns.
761 Unpermitted combination of business object BUS2032 and sales doc. category L
I found BAPIs:
BAPI_CUSTOMERRETURN_CREATE for creating sales document of type ZDRE and SD document category H.
BAPI_DEBITREQUEST_PROXY_CREATE for creating sales document of type ZDDR and SD document category L.
please let me know if anybody have used them. If so what values need to be passed to I_UPLOAD_ID,I_DESTIN,I_SFA_REL parameters of BAPI_DEBITREQUEST_PROXY_CREATE. Are there any alternative solutions using the Salesorder bapi.
I have to create documents based on the flat file data no reference sales document numbers are available.
Appreciate your help..
Good Day
Regards
BhargaviLook at the code done by me
Program Name: *
SAP Name : ZAXXXXXX Version : *
Programmer : Chris Dong of ITDC *
Description : *
Includes : *
Function Modules: XX_XXXXXX *
Transactions : *
Programs : *
REPORT XXXXXXXX LINE-SIZE 80
LINE-COUNT 65
MESSAGE-ID ZA
NO STANDARD PAGE HEADING.
CLEAR l_order_partners.
l_order_partners-partn_role = 'AG'.
l_order_partners-partn_numb = '0001202491'.
APPEND l_order_partners TO li_order_partners.
CLEAR l_order_partners.
l_order_partners-partn_role = 'WE'.
l_order_partners-partn_numb = '0001202491'.
APPEND l_order_partners TO li_order_partners.
Sales document type
l_order_header_in-doc_type = 'ZDR'.
Sales organization
l_order_header_in-sales_org = '1000'.
Distribution channel
l_order_header_in-distr_chan = '01'.
Division
l_order_header_in-division = '04'.
REF DOCUMENT
l_order_header_in-REF_DOC = '9100000144'.
order reason
l_order_header_in-ord_reason = '925'.
item number
l_order_items_in-itm_number = '000001'.
material no
l_order_items_in-material = '000000000007000012'.
Qty
l_order_items_in-target_qty = '0000000000100.000'.
APPEND l_order_items_in TO li_order_items_in.
*BUS2094 Credit memo request " OSS NOTE 93091
*BUS2096 Debit memo request " OSS NOTE 93091
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA'
EXPORTING
ORDER_HEADER_IN = l_order_header_in
BUSINESS_OBJECT = 'BUS2096'
WITHOUT_COMMIT = ' '
CONVERT_PARVW_AUART = ' '
IMPORTING
SALESDOCUMENT = l_vbeln
RETURN = li_return
TABLES
ORDER_ITEMS_IN = li_order_items_in
ORDER_PARTNERS = li_order_partners
Message was edited by:
Chris Dong
null -
Standard Process for Credit Memo & Debit Memos in CRM
Dear all,
What is the standard process for Credit Memo and Credit Memo Creation within CRM Complaint Transaction?
We can successfully replicate Return Items and Replacement Items in ECC Return Order
But I don't know how to process Credit Memo and Debit Memo in ECC.
What are the Accounting Implications takes place once we create and release the credit memo / Debit memo in CRM Complaint Transaction?
How to see the entire document flow?
I can create Credit Memo for a Returned Line Item in CRM without any errors. But I could not see any follow-up transaction or process either in CRM or ECC.
Kindly educate me in this regard. Your suggestions are highly appreciated
Best regards
Raghu ram
Edited by: Raghu Ram on Jun 23, 2010 6:29 PM
Edited by: Raghu Ram on Jun 25, 2010 8:30 AMHi suchi,
The following would be very useful to you.
To reduce implementation time for print forms development, SAP has created a set of the most commonly used forms - Preconfigured Smart Forms:
<u><b>SD:</b></u> Invoice, Quotation, Contract, Delivery Note, Order Confirmation, Scheduling Agreement, Inquiry, Cash Sales, Picking List
<b><u>MM</u></b>: Purchase Order, Request for Quotation, Contract, Delivery Schedule, Good Issue (3 scenarios), Good Receipt (3 scenarios)
<b><u>FI:</u></b> Dunning Notice
All can easily adapt these forms to their requirements, saving time and money.
Hope this information has been useful to you.
if you would like to have a smartform of your own i.e a Z or a Y then there is an option to get a sap script copied onto a smartform.
the sap script for the same is -> <b>F140_DOCU_EXC_01</b>
Go to Txn SMARTFORMS and just put the required smart form name in FORM field and then go to the menu bar: Utilities-> Migrate SAPScriptForm and juts type in the Script name which is given above(i.e F140_DOCU_EXC_01 )
I hope this will be an amicable solution.
if helpful pls reward.
Thanks
Venugopal -
Hi ,
I have a problem related to excise invoice for debit memo ,problem is ,
We have created the order,delivery,billing and excise invoice for the basic price of Rs.100.
But now the basic price has increased,and its become Rs.120.
So that ,now we have created the debit memo requeste and debit memo for the balance amount of Rs.20.But as you know that there is no delivery, so we can not create the excise invoice for debit amount (Rs.20).
So for that amount I tried to create the excise invoice with t.code J1IH (other adjustment),but this amount is going in cenvat clearing account.
So can you please guide me that how can I create the excise invoice to debit the cenvat suspence account.
Please reply ASAP.
Regards
PrabudhHi everyone,
I am waiting for reply.
Thanks -
A/R Credit Memo & A/R Debit Memo
Hello Experts,
In Sales A/R section, we have an option A/R Credit Memo which hits the credit side of the customer (...works fine).
For Debit Memos, I could not find an option, what I can see is only A/R Invoice of "Service Type". I think it is not an appropriate option. As it generates an Invoice document.
Please help, how would I hit the customer Debit side ?
Regards,In function debit memos are identical to invoices,
(i.e) A/R invoice of document types
items/services can be treated as A/R debit memo.
Jeyakanthna -
How to create Debit Memo in SAP.
Hi Experts !
We wanted to create a debit memo even after closing a purchase order i.e. payment is made to vendor.These debit memos are mainly related with pricing differences and overshooted logistics cost. We can make use of Subsequent cr/dr function, but it requires an invoice/credit memo from vendor and we can enter this as subsequent credit/debit. But in our case we need to send a debit note to the vendor. Remember it has to affect A/P and Cost accounts in this transaction. I request you to kindly help me in this regard.hai chalam,
you can create a debit memo to the vendor after closing the po also.
Under Financial Management --> you will find create credit memo in that you will find document type for debit memo, enter document type, like that u can create debit memo
if vendor is one time vendor he will returns the amount as per debit memo, or if he is a regular vendor it will be converted as down payments or amount will be reduced in the next invoice.
hope this will help You.
with regards
srinivas -
How to create debit memo in SAP R/3
Hi Experts !
We wanted to create a debit memo even after closing a purchase order i.e. payment is made to vendor.These debit memos are mainly related with pricing differences and overshooted logistics cost. We can make use of Subsequent cr/dr function, but it requires an invoice/credit memo from vendor and we can enter this as subsequent credit/debit. But in our case we need to send a debit note to the vendor. Remember it has to affect A/P and Cost accounts in this transaction. I request you to kindly help me in this regard.Hi,
I am trying to understand your requirement; You want to pay the vendor after the PO is closed(Del Comp;Inv recieved & Payment done). The payment has to be done because of Pricing diff/overshooted logistics.Did you receive a revised invoice for this? How this is reflected in the system?
Warm Regards
Anup Varghese -
Order related inter company credit memo - Order status 'Not Invoiced'
Hi,
We have recently created 'Order related inter company credit memo' process for return Stock Transport Orders(STO). For this, we used order related billing (billing relevance = C i.e. Relevant for ord.-related billing - status acc.to target qty) with standard item category 'G2N'. The issue is even after invoicing, sales order item status is 'Not Invoiced' and header status is 'Open', hence these orders are picked up multiple times during background invoice run and multiple invoices are being created.
How do we control the 'Completion' status in order related inter company billing? VBUP-FKSAA is not changed even after billing document creation and remains as A i.e. Not yet processed. Do i need to check VBUP-FKIVP since this is inter company billing.
I have also tried with TVAP-FKREL as 'B' i.e. Relevant for order-related billing - status according to order quantity but of no use.
Please advise.
Thanks in advance.
Regards,
Ganesh
Edited by: Venkata Ganesh Perumalla on Nov 10, 2010 6:08 PMHI,
Check too the Note 308989 - Consultant note for cross-company transactions
It says:
I.1.5 Returns request (IR) - returns delivery - customers credit memo -
intercompany credit memo (IG) (RETURNS)
The customer credit memo is created for the returns request and the
intercompany credit memo is created for the returns delivery.
Regards,
Eduardo -
Hi all,
I had created a sales order for 5 material (eg: mat-1 to mat-5) from
line item 10 to 50. For mat-5 (which shows line item no.50 in sales
oreder) we had done 4 partial deliveries & collective billing for all
the deliveries (which shows line item no.50,60,70 & 80 in the comm
invoice for each delivery). now i want to genrate the debit memo
request for line item 60 & 80 with reference to billing doc. & the
debit memo.But while posting to accounting (debit memo) it gives me
the error:
ITEM 00050 IN SALES DOCUMENT 480017 DOES NOT EXIST
Whereas 480017 is a debit memo request doc no. & item 50 is not
deleted anywhere in sales order, invoice or in debit memo request.
Plz help to solve this problem.
Regards,
Dhirajthis is because of Billing block has been set there at sales order line item level.
and please check that and beside also look at copy control VTFA document flow indicator.
thanks
mk -
Dear friends,
The copy controls are set for a) Sales Order to Debit memo request (VTAA) & b) Billing to Debit Memo Request (VTAF)
Scenario #1. Sales Order Qty is 10 No (Delivery and Billing done for 10 Nos) and I have created a DMR for qty 5 Nos with reference to the sales order and created the Debit Memo.
Now when I create one more DMR with reference to the same sales order, the qty referenced in the DMR is 15 No
Scenario #2. Sales Order Qty is 10 No (Delivery and Billing done for 10 Nos) and I have created a DMR for qty 5 Nos with reference to the Billing doc and created the Debit Memo.
Now when I create one more DMR with reference to the same Billing doc, the qty referenced in the DMR is 10 No
1. While creating a Credit Memo Request or Debit Memo request whats the standard reference document to be used? Is it Sales order or a Billing doc?
2. I have tested this using standard doc types and I think this is not the correct behaviour.
In both the scenarios, the referenced qty should be 5No when you are creating the DMR for the second time.
Somebody let me know what should be the Ideal way to do it......
Thanks
IsaacHi Isaac,
In transaction code VTAA goto OR to DR and look for your Item Category and in that there is a field by name Pos./neg. quantity
and in that you will find the help details as shown below:
The below details will help you for all the documents like Quotatio, Sales Order , billing etc.
Quantity is calculated positively, negatively or not at all
Indicates whether, during copying, the quantity or value in the target
document has a negative effect, positive effect, or no effect at all on
the quantity still to be completed in the source document.
Use
The system uses this indicator to determine how the quantity in the
source document is affected. For example, if you
o Create a quotation item for 100 pieces,
o Copy the quotation into a sales order, and
o Create a sales order item for 80 pieces,
the copying has a positive effect on the quotation. In effect, you have
added 80 pieces to the quotation quantity that is now considered
complete. 20 pieces in the quotation remain to be completed.
If you do not make an entry in this field, or set indicator 0, the
source document is not blocked, which allows you to create several
target documents at once (for example, when using EDI and frequent
contract releases).
While the source document (such as quotation or quantity contract) is
being processed, it is blocked. For instance, if you are working on a
quantity contract, no one can create a release order for that contract).
In sales documents, for example, you can expect the following results:
o Quotation -> Sales order: positive
o Contract -> Return: negative
o Sales order -> Sales order: no effect
In billing documents, for example, you can expect the following results:
o Delivery -> Invoice: positive
o Delivery -> Cancellation: negative
o Delivery -> Pro-forma invoice: no effect
Regards -
Creating a debit memo request with reference to an invoice
Hi,
An invoice shows wrong MWST value because of incorrect customer tax classification as Tax exempt. I corrected the cust tax classification to "Liable for Tax". Then I tried to create a debit memo request with reference to the incorrect invoice. Thats a requirement by the customer. Invoices with incorrect VAT are not to be cancelled. A specially created VAT only sales order (Debit memo request) is used to create a sales order with 0 net value and correct MWST . But while trying to create the debit memo request, the system picks up the same old condition record for the MWST. How to overcome this situation ?
The copy control for the item category from billing doc to debit memo request is set to "B" that is new pricing. I even tried to update pricing. But it does not work. Changing the Service rendered date or the pricing date to current date also does not help.
Please help.
Regards.This is working fine. What I did was
1: create a new pricing procedure
2: made the PR00 condition statistical
3: using a routine calculate the MWST based on the PR00. But PR00 itself does not contribute to the net value. This part is working fine. I could create debit memos successfully.
The problem is if we change either the customer or the material tax classification after creating the invoice, and then create a debit request with reference to the incorrect invoice, the system still considers the old tax classfication and therefore the old MWST rate. If I create a debit request without reference, the new rate is applicable.
I hope I have made clear.
Regards. -
Billing a Debit Memo to a Vendor in CRM
Hi,
I am creating a warranty claim document from a service confirmation document in CRM 7.0
Once the claim is approved i am triggering a debit memo doc which can be billed in crm.
Now while creating an invoice i am getting few errors as shown below:
Error in document: BEBD 0090000158CRMB CDVCLNT501 ( Message Class RW / No. 609 )
Object not known in CO ( Message Class IAOM / No. 028 )
Postings to account 210040 (company code 2070) are only possible in currency EUR ( Message Class F5 / No. 353 )
Account 560001 requires an assignment to a CO object ( Message Class KI / No. 235 )
I have also done the CO integration for warranty claim doc.
Any hints will be appreciated.
Regards,
PPHi
A Billing type is cancelled by its Cancellation Billing Type, which is specified in the Billing Type details screen (VOFA).
In standard, Credit memo(G2) is cancelled by Cancellation Billing type(S2).
So, check in VOFA for billing type G2, whether Cancellation billing type S2 has been proposed/maintained.
Create cancellation (VF11) for G2 and system by default will create S2 type of Billing.
Maybe you are looking for
-
Na teoria, vemos muita conversa mole sobre mundo, melhor, etc. mas, na prática, esse suporte é muito chato, pois o mesmo é burocrático, sendo necessário um cansável passo a passo para poder interagir de alguma forma. Tenho sugestão para o navegador f
-
Customer service regarding credit card mishandling possible credit fraud
To whom it may concern, On Tue morning I placed a order for a sprint prepaid galaxy s3 and a go pro hero package through the early black friday preview deal. I had both items in my cart and checked out the go pro package with promo code. I then imm
-
How do you restrict rows returned in a group by query
I have a select statement with a "group by" and a "order by" clause and I want the number of rows returned restricted to the first 10. Normally this is easy using rownum but it does not work in my case with the "group by" and a "order by" clauses. An
-
Content server and shared folders on win2003
Hi I am new to DMS server. Is content server show the files in the shared folder ? is there any option to trying this ? In cv02n can we move the documents in shared folder to database ? need help
-
We are not implementing Project Resource Management here. What are the possible ways to enter the Cost incurred on an Employee (Salary) against the Project. This cost has to be there on projects subledger as it will be considered to calculate the Pro