Billing a Debit Memo to a Vendor in CRM

Hi,
I am creating a warranty claim document from a service confirmation document in CRM 7.0
Once the claim is approved i am triggering a debit memo doc which can be billed in crm.
Now while creating an invoice i am getting few errors as shown below:
Error in document: BEBD 0090000158CRMB CDVCLNT501 ( Message Class RW / No. 609 )
Object not known in CO ( Message Class IAOM / No. 028 )
Postings to account 210040 (company code 2070) are only possible in currency EUR ( Message Class F5 / No. 353 )
Account 560001 requires an assignment to a CO object ( Message Class KI / No. 235 )
I have also done the CO integration for warranty claim doc.
Any hints will be appreciated.
Regards,
PP

Hi
A Billing type is cancelled by its Cancellation Billing Type, which is specified in the Billing Type details screen (VOFA).
In standard, Credit memo(G2) is cancelled by Cancellation Billing type(S2).
So, check in VOFA for billing type G2, whether Cancellation billing type S2 has been proposed/maintained.
Create cancellation (VF11) for G2 and system by default will create S2 type of Billing.

Similar Messages

Miro debit memo - return to vendor

HI,
is it posible to define output for debit memo like output for rduction invoice (vendor error)?
the issue is that we want to use in standart Return to Vendor process and with invoice verification process to take out output with debit memo to the vendor.
thaks,
avishay

thanks,
how can i connenct the new output type to Return to Vendor process ?

No price coming during Billing for Debit Memo .

Dear All ,
pl help as one Debit memo request is created , here in conditions basic price is flowing as default & other excise conditions are also capturing as default .but during Billing for this debit Memo by VF01 , the basic price comingas zero . pl guide what to do ?
Sap11

Hi,
1. Is the basic price is coming from condition records automatically then check the valid periods in the condition record if your billing date is within valid periods
2. Check in copy controls between order to billing, copy pricing requirements.
Let me know after checked the above
Regards
Goutham

Credit/debit memo request

hi,
1) credit memo request - After create invoice in vf01, then if credit memo needed, must create credit memo request in va01 then only can create credit memo in fb75?
2) debit memo request - After create invoice in vf01, then if debit memo
needed, must create debit memo request in va01 then only can create debit memo in fb70?
3) credit/debit memo can only be created after credit/debit memo request is created?
4) if credit/debit memo not created in fb75/fb70, where in sd can create?
5) credit/debit memo request done via which tcode if not va01.
thanks

Hi Eliana,
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.
Credit memo and debit memo is created used the T.Code VF01, in which we have to choose the billing type as Credit Memo or Debit Memo.
Credit Memo Request or Debit Memo request are created using T.Code VA01, in which we have to select document type as G2 or L2.
Hope this gives you some idea.
REWARD IF HELPFUL.
Regards,
Praveen

Credit memo and debit memo

Can some one kindly explain the img config step by step and how to check this setting in easy access.
Thankyou in advance
Rewards are assured
Best regards,
R.Srinivasan

REFER BELOW REWARD IF HELPS
Debit note and Credit note? What is the purpose? How we create?
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.

INTER CO /DEBIT MEMO

in case of inter company billing is it possible to create both debit/credit memo....?if not why...

hi
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.
nagesh

How to create Debit Memo in SAP.

Hi Experts !
We wanted to create a debit memo even after closing a purchase order i.e. payment is made to vendor.These debit memos are mainly related with pricing differences and overshooted logistics cost. We can make use of Subsequent cr/dr function, but it requires an invoice/credit memo from vendor and we can enter this as subsequent credit/debit. But in our case we need to send a debit note to the vendor. Remember it has to affect A/P and Cost accounts in this transaction. I request you to kindly help me in this regard.

hai chalam,
you can create a debit memo to the vendor after closing the po also.
Under Financial Management --> you will find create credit memo in that you will find document type for debit memo, enter document type, like that u can create debit memo
if vendor is one time vendor he will returns the amount as per debit memo, or if he is a regular vendor it will be converted as down payments or amount will be reduced in the next invoice.
hope this will help You.
with regards
srinivas

Debit Memo Request Issue

Dear friends,
The copy controls are set for a) Sales Order to Debit memo request (VTAA) & b) Billing to Debit Memo Request (VTAF)
Scenario #1. Sales Order Qty is 10 No (Delivery and Billing done for 10 Nos) and I have created a DMR for qty 5 Nos with reference to the sales order and created the Debit Memo.
Now when I create one more DMR with reference to the same sales order, the qty referenced in the DMR is 15 No
Scenario #2. Sales Order Qty is 10 No (Delivery and Billing done for 10 Nos) and I have created a DMR for qty 5 Nos with reference to the Billing doc and created the Debit Memo.
Now when I create one more DMR with reference to the same Billing doc, the qty referenced in the DMR is 10 No
1. While creating a Credit Memo Request or Debit Memo request whats the standard reference document to be used? Is it Sales order or a Billing doc?
2. I have tested this using standard doc types and I think this is not the correct behaviour.
In both the scenarios, the referenced qty should be 5No when you are creating the DMR for the second time.
Somebody let me know what should be the Ideal way to do it......
Thanks
Isaac

Hi Isaac,
In transaction code VTAA goto OR to DR and look for your Item Category and in that there is a field by name Pos./neg. quantity
and in that you will find the help details as shown below:
The below details will help you for all the documents like Quotatio, Sales Order , billing etc.
Quantity is calculated positively, negatively or not at all
Indicates whether, during copying, the quantity or value in the target
     document has a negative effect, positive effect, or no effect at all on
     the quantity still to be completed in the source document.
Use
The system uses this indicator to determine how the quantity in the
     source document is affected. For example, if you
o   Create a quotation item for 100 pieces,
o   Copy the quotation into a sales order, and
o   Create a sales order item for 80 pieces,
the copying has a positive effect on the quotation. In effect, you have
     added 80 pieces to the quotation quantity that is now considered
     complete. 20 pieces in the quotation remain to be completed.
If you do not make an entry in this field, or set indicator 0, the
source document is not blocked, which allows you to create several
target documents at once (for example, when using EDI and frequent
contract releases).
While the source document (such as quotation or quantity contract) is
being processed, it is blocked. For instance, if you are working on a
quantity contract, no one can create a release order for that contract).
                                                                                In sales documents, for example, you can expect the following results:
o   Quotation   -> Sales order: positive
o   Contract    -> Return: negative
o   Sales order -> Sales order: no effect
In billing documents, for example, you can expect the following results:
o   Delivery    -> Invoice: positive
o   Delivery    -> Cancellation: negative
o   Delivery    -> Pro-forma invoice: no effect
Regards

Invoice Reduction (Debit Memo) Scenario

Here is the processing I'm trying to get to work in SAP. Vendor send us an invoice, we post the invoice in MIRO and the invoice is blocked for payment (the Invoice price > PO Price). Now that the invoice is in blocked status, it is routed to the department that deals w/ discrepancies. They determine that it is a Vendor pricing error, so they send a Debit Memo to the Vendor stating we are posting a credit in the amount they over charged us.
It looks like the Invoice Reduction functionality in MIRO has what we are looking for (printing out the complaint and posting the credit to the account) except we don't know if the Vendor is at fault at the time of Invoice Entry. Is there a way to run Invoice Reduction or post a Debit Memo after the invoice is posted? Also, we have a few Golden Vendors where we won't send a Debit memo and will wait for them to send us a Credit memo before posting to the Vendor account, so the solution will need to take this into account.
As usual, any guidance you can provide will be appreciated.

I agree, you can use the Credit Memo functionality in SAP, but I don't think you can print out a form once the credit memo form to send to the Vendor that states you are taking the debit. It would also be useful if this process was automated. The invoice is blocked, you determine that the Vendor is at fault, the Credit Memo is automatically posted and a Debit Memo is printed out. Anyone aware of any bolt on software that might help?

Debit memo with invoice reference

Hi dear all,
Please help me with the following situation. I am creating a billing document - Debit memo- with reference to an other docuemnt - Invoice. However, in the accounting document the nvoice reference is not filled and all the data are not copied - terms of payment and baseline date.
This isn't the case for the Credit memo, when I create a Billing docuemnt - Credit memo- with reference, the invoice reference in the accounting document is filled and all the data are copied - terms of payment and baseline date.
Please help me with advice how can I activate the invoice reference to be copied also for Debit memo.
Thank you,
Desimira

Hi,
V will populate the fields from the Customer master data, but I want to populate from the original document that our Debit memo is created with reference to.
Thanks a lot for your answer.
Desimira

Debit memo and Invoice reference

Hi dear all,
Please help me with the following situation. I am creating a billing document - Debit memo- with reference to an other docuemnt - Invoice. However, in the accounting document the nvoice reference is not filled and all the data are not copied - terms of payment and baseline date.
This isn't the case for the Credit memo, when I create a Billing docuemnt - Credit memo- with reference, the invoice reference in the accounting document is filled and all the data are copied - terms of payment and baseline date.
Please help me with advice how can I activate the invoice reference to be copied also for Debit memo.
Thank you,
Desimira

Dear Desimira,
once go thru VTFA Copy control assign allocation number as B-SALES ORDER NUMBER,
Refference number as B OR E accordingly your reqt.
Thanks
Nar

How to create Credit or Debit Memo for Third party orders

Dear All,
Is it possible to create Credit or Debit Memo for the Third party Orders.
Is there any standard procedure to do that?
Kindly explain.
Regards,
Mullairaja

Hi,
What is the scenario, why you want to create Cr/ Dr memo?
Any credit / Debits memo to the Customer, SAP have provided the standard functionality which can be used across the different types of sales.
- but if you are looking for issue Credit / Debit memo to the vendor which can be done using Tx: FB60
Regards,
Reazuddin MD

Error while creating Billing doc using VF01 for Debit memo req. from RRB

Hi,
I am creating billing doc for my Debit memo req. which is created using RRB(DP90, DP95).
Error message - Item 000010 does not exist.
When I debugged and looked into code it seems following lines are causing problem.
Program
LV60AA28
Line u2013 734
IF vbap-vkgru EQ vkgru_dyn_posten.
    IF vbap-aufnr IS INITIAL .
set AUBEL because it was overwritten by VBAP-VBELN
      vbrp-aubel = vbap-vgbel.
      vbrp-aupos = vbap-vgpos.
      vbrp-autyp = vbap-vgtyp.
This code was not in 4.6 system.
We have just migrating from 4.6 to 6.0 and facing this issue while testing.

First of all you should try to learn how to express in a public forum like this.
On your comments
Do some ground work from your end
why should I ?? if you want you can do ground work or any work. If you post a question, you have to hear patiently all suggestions and dont scribble whatever you want.
You should have some basic
   understanding of SAP ABAP.
You should have posted this question ABAP forum !!!!   Why without any sense you have posted in sales forum ??

Header Billing Plan - credit memo and debit memo

Folks,
I have the following scenario here.
I have a billing plan order (BP) - with header billing plan.
I have three lines in the billing plan
1) $5000 ...FAZ (Billing Request)
2) $10000...L2 (Debit Memo)
3) $3000...G2 (Credit Memo).
Once i go to VF04,
I have all three billing due. However, only billing type FAZ has the header conditions (PR00, AZWR, TAXES) populated and net value $5000. (Populated against AZWR)
Both L2 and G2 have no header conditions populated and the net value is 0.
The copy control is set up the same for all and all have same document pricing procedure (A).
Is it something basic I'm missing or is there anything else I have to do?
Or pls let me know the process for debit memo / credit memo with a billing plan.
Pls respond ASAP as we have the Proof of Concept scheduled sooner.
Helpful answers will be rewarded promptly!
Thank You,

Hello,
I think that basys of this process is not correct: the purpose of billing plan is to define different invoicing schedules, typically for businesses working with projects, and on top of that, billing plan is the only standard way to manage advance payment and automatically determine the settlement of the advance payments on final invoices.
For this, in my opinion it's not correct entering in the billing plan items with Credit Memo or Debit Memo request. You should have only andvance payment items and invoice items (document category = M).
In a common invoicing process, you can have the following steps:
- Down payment request (FAZ);
- Invoice (F1) reduced by the downpayment amount (if that is the case);
Then you can create a Credit Memo request, against the Invoice, if for some-reason you have to revert back something to the customer; or you can create a Debit Memo request if you have recharge the customer with reference to a document already invoiced. I think that invoice type G2 and D2 should not be "planned" steps in an invoicing process. On top of that, it's not advisable creating Credit Memo requests with reference to an invoice containing downpayment clearing item, as it would lead to incorrect postings into accounting.
Hope to be useful.
Best regards,
Andrea

Internal order number in debit memo request in external billing

Hi Experts,
I am trying to create a Debit Memo Request in ECC from a confirmation in CRM. This confirmation is created as a follow-up to the service order.
The debit memo request is getting created but it does not have a reference of the internal order and hence on billing, the revenue is not getting posted to the internal order.
Could you suggest if there is some setting required in CRM to link the internal order to the Debit Memo Request?
Thanks in advance

Hi,
I have the same issue, can you let me know how you resolved?
Thanks,
Kevin

Billing a Debit Memo to a Vendor in CRM

Similar Messages

Maybe you are looking for