Inter row calculation

Hi all,
In my region select query (SELECT A,B,C,D FROM SOURCE ).
I have edited the Report attributes to have 'Select Static LOV' in column A and 'Select Static LOV' in column B.
These Static lovs for A & B are distinct column(different) value of a table X.
Now i want Col D in Tabular report to be calculated on the base of values in A & B
Is there a way to do that, any help will be highly appreciated

Hi
It would be greate if you put an example on apex.oracle.com
Best Regards, Kostya

Similar Messages

Inter-row rules

Hi,
I have product and stores dimensions, some measures and a custom measure 'Obs'. One of the measures is 'Type', others are 'saling_price' and 'cost_price'.
Now I have to run a model and every time a rule is not satisfied by one product/store, the 'Obs' column must be updated with the reason why it failed.
Here is an example of one simple rule (horizontal rule):
- For each product,store: IF cost_price > saling_price THEN Obs='ERROR 1';
What I don't now is how to handle rules that require inter-row calculation (vertical rules). For example: 'All Type 1 products must have a saling_price lower than Type 2 products'.
Is it possible to model this type of rules?
Thanks for the help,
Ricardo

Hi
It would be greate if you put an example on apex.oracle.com
Best Regards, Kostya

Result Row calculation

Hi result rows calculation is not happening properly in result rows as per the formula .
Formual for Absolute Error = Final forecast - Actuals
Follwing is the report out put
Material                    Period01
10324401     Final Forecast        733,490.000 LB
     Actuals              555,583.67 LB
     Absolute Error       177,906.33
10326795     Final Forecast        1,306,894.935 LB
     Actuals               1,406,158.27 LB
     Absolute Error         99,263.33
10329435     Final Forecast         188,000.000 LB
     Actuals               192,000.00 LB
     Absolute Error        4,000.00
10580325     Final Forecast        76,105.938 LB
     Actuals               215,999.82 LB
     Absolute Error        139,893.89
10580427     Final Forecast        158,733.076 LB
     Actuals                0.00 LB
     Absolute Error         158,733.08
Overall Result Final Forecast        2,463,223.949 LB
     Actuals                2,369,741.76 LB
     Absolute Error         579,796.62
In the above report , Material wise calculation for Absolute error is correctly calculating , BUT when it comes to Over all Result its just summing up all materials Absolute error and showing .
What i want in over all result is Absolute error should be calculated as overall Final Forecast - Over all actual ( I.e formula should be applied to over all result also ).
I tried with exception aggragation and other stuff but nothing is working .
Can any one Help me to apply the formula for result rows also ...
Helpfull inputs will be appriciated with points .
thanks in advance

Hi All thanks for ur replies .
   I solved my issue as following .
Formual for Absolute Error = Final forecast - Actuals
For Absolute error formula there are some ' exceptional aggregation ' and 'calculate result value as ' .
I removed these ' exceptional aggregation ' and 'calculate result value as ' and refreshed the report now in result rows
' Absolute Error' is calculating   as desired i.e by using result rows ' final forecast' value & ' actuals' values in the formulae .
Regards
Navenas

Row Calculation (Navigation Ragged Dimension)

Hello,
I have a row calculation/navigation question with the Olap Analysis product in 4.1 compare to 3.1. Currently we are in BOE3.1 but want to go BI4.1.
We use SSAS 2008 as the main source for OLAP. In 3.1 when we don't want to see a member (in this case central), we de-select it from
the members list, the total remain the same. In 4.1 we cannot do that anymore. If we de-select central from the members list,
the total re-calculate as depicted by the example below. Basically the row column become a filter. Is there a option for this so the data doesn't recalculate. We want the same behavior as 3.1
On a related note. The navigation on the slice and dice in analysis is more cumbersome in 4.1, you always have to go the the layout
to change filter. Is there a way to make it more similar to 3.1. Less clicking
Region
Total Count
Total sales
All Region
6
60
    East
1
10
    Central
2
20
    West
3
30
In Voyager
Region
Total Count
Total sales
All Region
6
60
    East
1
10
    West
3
30
Olap Analysis
Region
Total Count
Total sales
All Region
4
40
    East
1
10
    West
3
30
Thanks
rs

Hi Ian,
Thanks for the response? What is best way to contact you We don't have direct support with SAP. We go through a 3rd party. Thus I want some information before contacting them.
-rs
Message was edited by: Tammy Powlas > please note do not include e-mail addresses in SCN per rules of engagement. Ian gave you his contact information above - Ian.McAlpine at sap dot com

Row Calculation Line Height Issue: Not Same Height as Column Lines

Hi,
I am using BI 4.1 SP4 with Microsoft SQL Server 2012.
When building calculations, I have noticed that the height of the line (in the rows section) is not the same as the line in the columns section. It is slightly larger. By the third calculation, it becomes very noticeable. I know that I can adjust the height and make it bigger, but I can not make is smaller.
Please let me know how I can resolve this unalignment issue in the crosstab:
Thank you,
Michael

Hi Michael,
I'm afraid I can't say. This appears to be an IE10 rendering issue, rather than an SAP issue. I did some further testing and I don't see the problem in IE11 or Chrome but it is very apparent in IE10. I've included a screenshot from IE11 and as you can see the table is not misaligned.
Regards,
Philip

Results row calculation between two column result in BEx Report.

I want to use weighted average method between two keyfigure.
for example consider the following secnario.
CH        Kf1       Kf2
A         10        5
B          6        4
C          3        2
Result     19     b]4.21</b>
how 4.21 is ((105)+(64)+(3*2))/total of Kf1(ie 19)
( A value(Kf1Kf2)+ B value (Kf1Kf2) + C Value (Kf1*Kf2))/total value (Kf1) = 4.21
is it possible to achieve the above result for Kf2.
With regards,
Hari

Hello,
I cannot able to use Excel Macro functionality since it is a drill down report and report cells varies based upon the selection parameter.
and also i can't able to use Calculation, since this report contains lot of columns and if i use the formula, one more result column i have to include in all key figures and also business users not able to understand the report....
Is it possible to create a variable structure, for example user is executing for 10 days , the structure should display for only 10 days ans also i create structure for 31 days (ie one month)..
With regards,
Hari

ADF Faces Table with a Total row calculated?

Hi there OTN Community:
I have another doubt.
I have an EJB dataControl, and i use one of his collections to display the data in an ADF Faces Table. One of the columns of the Adf Faces Table is numeric, And i have to display the Total of that Column.
I only shows 10 rows per screen, but i need to show the total of all the rows.
How i can calculate it?

Mmmmm..... You're right!...I will try that.
Thanx :)
Hey, and....You know? i was thinking, maybe i can get the iterator and then capture each object of the iterator to compute the total. That is a crazy idea?, its possible?, its not recommended? or its ok too? :P
Thanx in advance.
Dany

Problem using Ago function

Hi all,
My problem is that when i use ago function it displays next months value for example first column shows balance of april month and next to it ago column displays balance of the may not march. I am really confused. Please help,
AGO(SR02BriefIncome.sr02_cube.BALANCE, SR02BriefIncome.timesDim."times Detail", 1);

Hi Nico,
Another question in relation to Ago function; I need to get value/balance a year ago which is 12 months ago, and also previous year's last months balances; the problem is that Ago function takes only integer, I have tried to put a variable, Is there is way i can get balances of the previous year's last month because it will be much easier to get it using built-in ago function.
Also i need help with your answer for thread How to use row values in Presentation or Administration for calculation
Re: How to use row values in Presentation or Administration for calculation
"Yes, I forgot this one. Of course, this solution work when you have a pivot column.
If you talk about period to period comparison, really often I must do a share like this one : ($2-$5)/$5.
And unfortunately, this is not possible in a calculated item. Is it ?"
We have a lot of reports with inter-row calculations, we have already used a lot sql model but we would like use answer also. Can u explain it with exact examples or steps.
thank you again,

OBIEE Answers and filtered totals

We try to prepare an reports in OBIEE Answers and we want to take filtered totals of a field.
Let me clear
We have a field values as
FieldSampleTotal VAlues
Name1 1000
Nema1 Detail 1 20
NAme1 Detail 2 980
NAme2 2000
Because of some hieararchy is data we want to calculated sum of just bold lines.
it means total is 3000
Thansks a lot.

An other option for inter-rows calculation will be to use the filter in one column formula of a table view :
FILTER(Fact.Values USING (Dim.Colunm = 'Name1' or Dim.Colunm = 'Name2'))I don't see the layout of your final report.
Do you want to see the details rows ?

Date tool calculation dimension is causing duplicated rows in drill through

I am implementing a date tool as per:
http://www.sqlbi.com/articles/datetool-dimension-an-alternative-time-intelligence-implementation
I have my date tool dimension shell with 10 rows, a row for each calculation. I've created the scope statements in the cube. The date tool is working with the calculations I've created.
I've found a problem with drill through in Excel 2013 where it returns duplicate rows. It looks like its a cross join of rows that should be returned by the number of rows (calculations) in my date tool dimension. If I remove the date tool dimension from
the cube I have the correct number of rows so I know it's definitely the cause. I commented out the scope statements to see if that was the problem and it isn't. There must be something else on the configuration that I've missed but I can't spot it. Any ideas?
Thanks Brian
Brian Searle

Seems like this may be the issue
see
http://javierguillen.wordpress.com/2012/03/05/userelationship-and-direction-of-context-propagation/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Percentage Calculation for result rows

Hi
I have problem with percentage calculation on result rows. I have 2 KFs A and B, the result is calulated by setting 'calculate result rows as' to 'summation'.
But in KF 'C' (which is calculated as A/B*100 ),
Now the probles is the systen picks up original values of A and B for calculation of C in result rows.
i.e. system picks up values of result rows for A and B for
setting 'calculate result rows as' to 'nothing defined'.
Any ideas on how to fix this.
Thanks
Karen

Karen
I found something in Forum for you
Result Rows Calculation
Pradip's Solution should work. Try and if it is don't forget to award points.
Regs
Gopi

Auto calculation row, work around for mixed calc methods?

I have a problem with an auto calculation row. One of the columns in the report is a percentage so I want the total row to calculate using a column formula, instead of the Auto Calculation Row calculation method setting.
We're using the auto calculation row as a way to churn through many Entity members, displaying financial totals for 4 Account category groupings for each Entity member.
For each Entity, those 4 rows display the data they're supposed to, and the auto calc row generates the 'Total', which is the calculation method it is set to do. With 2 columns in play, it works like this:
A1 through A4 display data, and are summarised in [A][Total Row]
B1 through B4 display data, and are summarized in [B][Total Row]
An updated requirement for a % column came up, and now we're trying to get that to display properly in column [C].
[C] is created as a formula column
The formula is set to [B]/[A], and formatted to display 0.01 precision
We expect each row to use this formula, and for rows 1 through 4 it does.
However, for [Total Row], it does not calculate [B]/[A]... instead it calculates [C][1]+[C][2]+[C][3]+[C][4]
This makes sense in terms of what the 'auto calculation row' is designed to do, or as to how it is explained in FR documentation.
The calculation method is set to 'Total', so it just adds up all of the data.
But we're looking for a combination of settings or a work-around that permits the Auto Calculation row feature to be used with mixed calculations as I've described.
We're on FR 11.1.2.362
Thanks
Troy

gofer wrote:
Hi osgood, thanks for getting back, thanks for that suggestion, I think that's a nice way of going about it. The form is working great with the calculation but I still can't get it to work on the reply email back to the site.
This is what I've used in the PHP form;
$freight = $_POST['PROD_freight_1'];
$totalcost = ($chardonnay_2011_bottles * 20 + $chardonnay_2011_cases * 204) + ($pino_gris_2011_bottles * 21 + $pino_gris_2011_cases * 228) + ($sauvigon_blanc_2011_bottles * 20 + $sauvigon_blanc_2011_cases * 204) + ($riesling_2012_bottles * 20 + $riesling_2012_cases * 204) + ($pinot_noir_2009_bottles * 25 + $pinot_noir_2009_cases * 250) + ($PROD_freight_1);
This the code for the reply back to the site;
\n selection \n $PROD_freight_1
Cheers
The variable should be:
+ ($freight);
and
\n selection \n $freight
Does that work?

Discoverer Row wise calculation columns

Can You use Excel type Formulations in discoverer?
Meaning Can a calculation column that calls the row into a formula such as a general
i.e. Apples, bananas, oranges ROWS Calculation Column ROW / Total fruit
That include crosstabs such as time and let's say grocery store
Also there is a requirement that states if percent of apple fruit is greater then 50% of total fruit then a string such as "more then half" must be displayed in a calculation column....
The actual formulas are more complicated however these examples are to find out discoverer functionality.
Thanks way in advance....

Can You use Excel type Formulations in discoverer?
Meaning Can a calculation column that calls the row into a formula such as a general
i.e. Apples, bananas, oranges ROWS Calculation Column ROW / Total fruit
That include crosstabs such as time and let's say grocery store
Also there is a requirement that states if percent of apple fruit is greater then 50% of total fruit then a string such as "more then half" must be displayed in a calculation column....
The actual formulas are more complicated however these examples are to find out discoverer functionality.
Thanks way in advance....

Performing a specific calculation in a pivot table with BI Publisher 10g

I am using BI Publisher 10g and new on it and I need to integrate a specific calculation measure in a pivot table
The logic uses two measures that already exist in the report (Demand & PAB) and the required calculation is represented by a new measure/row (Calculated). The pivot time is in weeks
Week w0     w1     w2     w3     w4     w5 .....
Demand     d(w0)     d(w1)     d(w2)     d(w3)     d(w4)     d(w5) .....
PAB     p(w0)     p(w1)     p(w2)     p(w3)     p(w4)     p(w5) .....
Calculated     c(w0)     c(w1)     ....     ....     ....     c(w5) .....
If p(w0) < d(w1) --> then c(w0) = p(w0) / d(w1)
If not
If p(w0) < d(w1) + d(w2) --> then c(w0) = p(w0) / ( d(w1) + d(w2) ) * 2
If not
If p(w0) < d(w1) + d(w2) + d(w3) --> then c(w0) = p(w0) / ( (dw1) + d(w2) + d(w3 ) ) * 3
If not
etc .... Same logics apply for c(w1) and so on
Is such calculation logic achievable in Bi Publisher ? If yes, how would you do it ?
Thanks for your time and support on this
Regards, Samir
Edited by: skaroui on 02-Mar-2012 05:50
Edited by: skaroui on 02-Mar-2012 06:02
Edited by: skaroui on 02-Mar-2012 06:12

Can you use the logic that you specified in the data model (query) to generate the required data and then use it in the pivot table? That would be the easiest way to do it. Tweaking the code to include the conditional logic/calculated measures is not going to be straightforward..
Thanks,
Bipuser

Carry-forward Calculating Data, but not Updating

Currently having difficulty in getting results to generate for the Balance Carryforward in BPC 7.0M version. Receiving the following in the log message after the logic is executed:
Executing SPCOPYOPENING [FINANCE], [ACTUAL], [LC], [SPSCOPE_808950], [SPLOG_926445]
SPCopyOpening Version 7.0.112
336 Rows Calculated
0 Rows Updated
Questions:
- Why only 336 rows Calculated?
- Why 0 rows Updated?
Background:
-     Loaded 453 records of data into Time member 2007.012 for Actual category u2013 all records are related to balance sheet accounts.
-     Added DIMLIST property to Account dimension and specified u2018BSu2019 for all base level balance sheet accounts and u2018ISu2019 for all income statement accounts.
-     Actual category dimension member has OPENING_YEAR property with value of u20182007u2019 and OPENING_PERIOD property with value of u20182007.012u2019
-     Configured Carry-forward Business Rules for the following:
o     Source Account: u2018BSu2019 (in reference to all balance sheet accounts via the DIMLIST property of account)
o     Source Flow: u2018TotalActivityu2019
o     Destination Account: I left this blank as help documentation suggests that by doing so, the account will remain the same once carried forward
o     Destination Flow: u2018OpenBalu2019
o     Reverse Sign: I left this as unchecked
o     Data Source Type: Input only (data was loaded into an Input data source)
o     Same Period: I left this as unchecked
o     Apply to YTD: I left this as unchecked (have also tried to run with this checked and obtain the same results as above)
-     Input the following logic into Default.lgx:
*SysLib Stored_Procedure_wrapper.lgl
RunCopyOpening (FINANCE, LC, ACTUAL, 2008.001, 1001)
   (Have also tried RunCopyOpening (FINANCE, LC, ACTUAL, [%SCOPETABLE%], [%LOGTABLE%]) and received the same results)
-     Executed the logic via Data Manager package and selected the following parameters:
o     Category: Actual
o     Entity: 1001 (the only entity for which data was loaded)
o     Period: 2008.001
I have reviewed the ['How-To'|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b026be43-40cf-2b10-6cae-ed8900ace7f9] document on setting up the Carryforward and also a few other postings on this board related to carry-forward and have tried suggestions in those threads to no avail.
I would be grateful for any assistance you can provide and please let me know if you need any further details.
Regards,
Jim Link

Kranthi,
Thank you for the reply. I understand what you are saying; however, when I run a report for 2008.Total, the balances that were loaded in 2007.012 and subsequently carried-forward are not showing up in the report. I'm assuming that the beginning balances should be showing up on this report, correct? I am running the report for all members of each dimension in the application, so I don't believe its an issue with my current view.
Regards,
Jim

Inter row calculation

Similar Messages

Maybe you are looking for