Interacting with VBscript - Shell/GuiTree

Hi all,
I am experiencing problems to interact with a GuiTree. The Script Devolopment Tool i SAPGUI tells me:
Type: GuiShell
Name: shell
SubType: Tree
"/app/con[0]/ses[0]/wnd[0]/usr/ssubAREA05:SAPLCRM_CIC_NAV_AREA:0101/tabsTABSTRIP/tabpNA_TAB1/ssubSUB_TAB:SAPLCRM_CIC_NAV_AREA:0102/cntlNAV_CUST_CONT/shellcont/shell"
I know there is alot of commands to interact with these GUITrees like:
CollapseNode
DoubleClickNode
etc.
But I havent figured it out how to use em on the info above that the script dev. tool gives me. Can anyone give me an example how to use it or a just a short explaination?
I am very greatful for any help.
Best Regards,
Daniel Lindé

I don't know exactly how to solve your problem, but here's a few things you can look at.
1. You didn't say which computer you are on. At any rate, on Windows, you have to be careful and call the cmd.exe when you are trying to execute batch files (vs executing some other .exe).
2. You MAY be in trouble from latex. This is an argument from analogy - a specific problem I ran into.
I had a program written in C, which used lex/yacc. The input was read by lex. It turns out that the (Windows) implementation of lex - actually flex - used a function "isatty" to figure out whether to get input character-by-character or doing block reads. Well, when I used Runtime.exec, - for whatever reason - the C program got back a bad value, and bombed trying to read blocks of input.

Similar Messages

Interacting with a shell prompt

I am using the following piece of code:
String command = ".. some unix command ..";
Process p = Runtime.getRuntime().exec(command);
BufferedReader buffIN = new BufferedReader(new InputStreamReader(p.getInputStream()));
int c;
while ((c = buffIN.read()) != -1) {
System.out.write(c);
BufferedWriter buffOUT = new BufferedWriter(new OutputStreamWriter(p.getOutputStream()));
buffOUT.write(".. some interaction command ..");
int c2;
while ((c2 = buffIN.read()) != -1) {
System.out.write(c2);
buffIN.close();With this code, I can invoke ".. some unix command ..", read the output from the shell, but I am unable to send command ".. some interaction command .." to the shell and make it effective.

You need to flush the data from the BufferdWriter, so the process will get it.
So try as follows:
buffOUT.write(".. some interaction command ..");
buffOUT.flush()

Visual Studio 2012 is no longer able to interact with any TFS server

I can connect to the on-premise TFS2012 server using the instance of VS2012 installed on the server machine as well as the instance of VS2012 installed on a coworker's machine.
I was able to interact with TFS2012 using the instance of VS2012 installed on my Win7 x64 machine, but only one time. Many reboots later, both of the server itself and my machine, I haven't been able to get VS2012 to interact properly with TFS.
When I click on "Team" and select "Connect to Team Foundation Server", the "Team Explorer" VS window opens. In that window, no matter what button or link I click on, Visual
Studio won't connect to TFS or allow me to choose a TFS server.
1. Clicking on the Home icon takes me to page with two buttons: Pending Changes & settings.
Clicking on "Pending Changes" takes me to a page where I can do 3 things: click on "no workspace" (nothing happens), click on Actions -> Open Source Control Explorer (which opens an
empty Source Control Explorer Window, from which I can do nothing), click on "Settings", which shows me a page with 4 options:
Security: clicking it results in the message "Team Foundation Error. Object reference not set to an instance of an object"
Group Membership: clicking it results in the message "Team Foundation Error. Object reference not set to an instance of an object"
Source Control: clicking it results in the message "Value cannot be null. Parameter name: serverName"
Process Template Manager: clicking it results in the message "Value cannot be null: Parameter name: tpc"
2. Clicking on the "Connect to Team Projects" icon takes me to a page where I can click on either:
"Configure Team Projects": clicking it does nothing
"Connect": clicking it does nothing
"Sign Up": opens a Visual Studio Online page on my web browser
If I instead go to File -> Source Control -> Advanced, there is only one option which appears to be working:
Change Source Control. When I click on it I get a window with a table with rows that correspond to the current solution and the projects in the current solution. ie:
Solution/Project: {item name}
Server Name: "<No Server>"
Server Binding: "<No Server>"
Connected: {gray uncheckable checkbox}
Status: "Not Controlled"
Local Binding:
Provider:
Relative path:
The buttons "Connect", "Disconnect", "Browse" are disabled. Clicking on the "Bind" button results in a window with the message "The mappings
for the solution could not be found" and two buttons: Ok and
Help. Clicking on Help results in a white window with the message:
"The 'EurekaPackage' package did not load correctly. The problem may have been caused by a configuration change or by the installation of another extension. You can get more information by examining the file 'C:\User\<username>\AppData\Roaming\Microsoft\VisualStudio\11.0\ActivityLog.xml'.
Continue to show this error message?"
Clicking "yes" open the following page on my web browser, which essentially tells me to go back to the "Change Source Control" window and unbind the project, which VS is not letting me do:
http://msdn.microsoft.com/query/dev11.query?appId=Dev11IDEF1&l=EN-US&k=k%28vs.tfc.sourcecontrol.MessageConnectionManagerCantBind%29;k%28TargetFrameworkMoniker-.NETFramework
The following is an excerpt from the "ActivityLog.xml" file mentioned in the white window that appeared when I clicked on the "Help" button:
<entry>
    <record>651</record>
    <time>2013/12/20 13:35:53.354</time>
    <type>Information</type>
    <source>Profile manager</source>
    <description>Begin export of category 'Source Control_TeamFoundation' ({2A718788-A6D9-44C5-90EF-438BF5B06A74}) from package 'Microsoft.VisualStudio.TeamFoundation.VersionControl.HatPackage, Microsoft.VisualStudio.TeamFoundation.VersionControl, Version=11.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' ({4CA58AB2-18FA-4F8D-95D4-32DDF27D184C}). 3349472 KB of virtual memory currently available.</description>
</entry> <entry>
    <record>652</record>
    <time>2013/12/20 13:35:53.354</time>
    <type>Information</type>
    <source>Profile manager</source>
    <description>End export of category 'Source Control_TeamFoundation' ({2A718788-A6D9-44C5-90EF-438BF5B06A74}). 3349472 KB of virtual memory currently available.</description>
</entry>
<entry> <entry>
<record>664</record>
<time>2013/12/20 13:48:51.961</time>
<type>Error</type>
<source>VisualStudio</source>
<description>CreateInstance failed for package [Microsoft.Data.Entity.Design.BootstrapPackage.BootstrapPackage, Microsoft.Data.Entity.Design.BootstrapPackage, version=11.2.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a]</description>
<guid>{7A4E8D96-5D5B-4415-9FAB-D6DCC56F47FB}</guid>
<hr>80070002</hr>
<errorinfo>Could not load file or assembly 'Microsoft.Data.Entity.Design.BootstrapPackage, Version=11.2.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.</errorinfo>
</entry>
<entry>
<record>671</record>
<time>2013/12/20 13:50:19.757</time>
<type>Information</type>
<source>VisualStudio</source>
<description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
<guid>{E8B06F41-6D01-11D2-AA7D-00C04F990343}</guid>
</entry>
<entry>
<record>672</record>
<time>2013/12/20 13:50:19.757</time>
<type>Warning</type>
<source>VisualStudio</source>
<description>Unexpected system error mode before loading package [Visual Studio Web Browser Package]</description>
<guid>{E8B06F41-6D01-11D2-AA7D-00C04F990343}</guid>
</entry>
<entry>
<record>676</record>
<time>2013/12/20 13:50:19.820</time>
<type>Information</type>
<source>VisualStudio</source>
<description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
<guid>{8C28E535-ABC9-4F92-B5C9-6C16617C8884}</guid>
</entry>
<entry>
<record>677</record>
<time>2013/12/20 13:50:19.820</time>
<type>Warning</type>
<source>VisualStudio</source>
<description>Unexpected system error mode before loading package [EurekaPackage]</description>
<guid>{8C28E535-ABC9-4F92-B5C9-6C16617C8884}</guid>
</entry>
<entry>
<entry>
<record>679</record>
<time>2013/12/20 13:50:19.820</time>
<type>Error</type>
<source>VisualStudio</source>
<description>CreateInstance failed for package [EurekaPackage]</description>
<guid>{8C28E535-ABC9-4F92-B5C9-6C16617C8884}</guid>
<hr>80070002</hr>
<errorinfo>Could not load file or assembly 'file:///C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\Extensions\Microsoft\Web Tools\Eureka\Microsoft.VisualStudio.Web.Eureka.dll' or one of its dependencies. The system cannot find the file specified.</errorinfo>
</entry>
<entry>
    <record>559</record>
    <time>2013/12/20 14:30:48.880</time>
    <type>Error</type>
    <source>VisualStudio</source>
    <description>Could not convert file time to system time</description>
    <hr>80070057 - E_INVALIDARG</hr>
</entry>
</activity>
What, if anything, can I do in order to be able to get Visual Studio 2012 to interact with TFS?

I'll add that when I run devenv.exe with the flag /TFSLink, VS opens a Team Explorer window that contains the following text:
An exception was encountered while constructing the content of this frame. This information is also logged in "C:\Users\<username>\AppData\Roaming\Microsoft\VisualStudio\11.0\ActivityLog.xml".Exception details:System.NullReferenceException: Object reference not set to an instance of an object.   at Microsoft.VisualStudio.Shell.Interop.IVsShell5.LoadPackageWithContext(Guid& packageGuid, Int32 reason, Guid& context)   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.GetPackage()   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConstructContent()

Problems interact with Flash and ASP

Hello people, I am beginning to learn how flash to interact
with asp, but im having problems in the execution of the file.
access the link below to see what happens:
http://www.trusttarget.com.br/flash/flash_asp.swf
My AS code:
var endereco:URLRequest=new URLRequest("
http://www.trusttarget.com.br/flash/produtos.asp");
endereco.method=URLRequestMethod.GET;
var carregar:URLLoader = new URLLoader();
botao.addEventListener(MouseEvent.CLICK,chama);
function chama(evento:MouseEvent) :void {
var variavel:URLVariables = new URLVariables("nome="+
busca.text);
endereco.data= variavel;
carregar.load(endereco);
carregar.addEventListener(Event.COMPLETE,carregou);
var texto:String= "";
function carregou(evento:Event) :void {
var variaveis:URLVariables= new URLVariables(carregar.data);
var quantos:int= Number(variaveis.quantidade);
texto= "";
if (quantos == 0) {
texto= "Nenhum Produto encontrado";
} else {
for (var i:int=1; i<= quantos; i++) {
texto+= variaveis["produto"+i] + "\n";
resultado.text= texto;
When I execute the file ASP that makes the search in DB, he
perfectly works, exhibiting the existent information in DB.
But when I try for the Flash, not of the right.
Please, help me
Thanks everbody

my ASP code
<%@LANGUAGE="VBSCRIPT" CODEPAGE="1252"%>
<%
banco = Server.MapPath("livro.mdb")
Set conexao = Server.CreateObject( "adodb.Connection" )
conexao.Open "DRIVER={Microsoft Access Driver (*.mdb)};DBQ="
& banco & ";"
Dim registros
Set registros = Server.CreateObject("ADODB.Recordset")
registros.ActiveConnection = conexao
registros.Source = "SELECT * FROM produtos WHERE produto LIKE
'" & Request.QueryString("nome") & "%'"
registros.CursorType = 0
registros.CursorLocation = 2
registros.LockType = 1
registros.Open()
x=0
Do while not registros.eof
x=x+1
response.write "produto" & x & "=" &
(registros.Fields.Item("produto").Value)
response.write " - Preço= " &
(FormatCurrency(registros.Fields.Item("preco").Value)) & " "
registros.MoveNext()
Loop
response.write "quantidade=" & x
registros.Close()
Set registros = Nothing
%>
thanks

Configure My DataFinder's Search Area with vbscript

Hello,
I am using the following vbscript to load data into the DIAdem Data Portal:
Set dataFinder = Navigator.ConnectDataFinder("My DataFinder")
Set queryForm = Navigator.CreateQuery(eAdvancedQuery)
queryForm.ReturnType = eSearchFile
Call queryForm.Conditions.Add (eSearchFile, "name", "=", "*.tdm")
dataFinder.Search(queryForm)
Set dataFinderResults = dataFinder.Results
Call Navigator.LoadData (dataFinderResults).
This works fine as long as the My DataFinder's Search Area has been previously defined via the DIAdem Navigator Panel.
We are starting DIAdem from a Visual C# application and the vbscript above is part of a vbscript that is passed into DIAdem when it is started via the /CScriptStart argument. I would like to dynamically set the My DataFinder's Search Area based a path argument that is also passed into DIAdem.
Is there a way to configure the My DataFinder's Search Area with vbscript?
Also,
Is there a way to have DIAdem run in the background without having the DIAdem screen flash when it is first started?
Thank you so much for any help with this,
Renette
Message Edited by rlj on 08-21-2009 06:06 PM
Solved!
Go to Solution.

Hi Renette,
As of DIAdem 11.1, newly released this past July, we now have a VBScript interface to define Search Areas and other aspects of the DataFinder. DIAdem 11.1 also has the ability to save off a DataFinder configuration file and load it, both interactively and programmatially. Earlier versions of DIAdem did not have any way to programmatically affect Search Areas.
Note that setting the Search Areas programmatically will not immediately result in all files being indexed and ready to be queried-- that may take a little time after you set the new Search Areas, depending on how many files are in each Search Area you add.
You are currently starting DIAdem with a DOS extension to have it run a VBScript right after launching. The advantage of this approach is that DAdem persists as an independent application even after the calling application ends.
You could alternatively call one of DIAdem's two ActiveX servers, which would invisibly start DIAdem and allow you to stay in contact with that DIAdem instance and read DIAdem variables and execute further DIAdem commands or VBScripts. The disadvantage of this approach is that if your calling program terminates, so does the ActiveX connection, and that shuts down the DIAdem instance launched by that ActiveX connection.
Ask if you have further questions,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card?

I am having much trouble with the new reminders in IOS7 and how it interacts with Outlook Exchange. Many features lost in the new version.

When I downloaded IOS7, I found that the reminders/task app and how it interacts with Outlook Exchange is much more difficult to use. Some of the issues that I am having are...
1. Trying to edit my task on my phone is not possible, if the notes are lengthy. When you click on the text to edit data near the top, it will scroll to the bottom and not allow you to edit the text because you cant see it.
2. Now all of my task are in one long list. I can not move from day to day like we could in previous version IOS6
3. When I do edit a short task reminder and click done, it crashes and completly goes away. It does save the edit though
4. You can only add task at the bottom of each days reminders. This is very inconvient and much more difficult than IOS6
5. There is a major delay or latency when interacting inside of reminders in this version. Much more than IOS6. It is very unstable and quirky.
I have never seen Apple take a step back with a product until now. I am a huge Apple fan and always will be, so I am hoping they make enhancements to fix these issue. It is a big time prodcutivity killer.
Thanks for any and all help you can give.
Troy Meachum

Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

Display and interact with a vi front panel on remote C++ app

Hello:
I am new to LV and need a little advice. I need to display a LabVIEW VI front panel in my C++ .Net application that users can interact with to view real-time spectrum data. The C++ app (client) must reside on a separate computer(s) from the VI so that the client can connect from anywhere around the world and interact with the VI.
I am not sure about the basic architecture that should accompany a good solution. We want to use TCP/IP but not DataSocket. I do not have access to Measurement Studio but I do have access to LabVIEW Professional Development System v 8.2. Can anyone provide suggestions on what I need to do in order to
1. Connect to my TCP server using my C++ client app - I have already written TCP client and server code which communicate but now I need to integrate LV
2. Get access to the VI sitting on that server
3. Send the VI front panel to the client for display
4. Allow the user to modify parameters on the front panel displayed on the C++ client, send those changes back to the server, and refresh the front panel displayed in the C++ client given the new parameters (I would like a real-time display of the spectrum to always be available)
Is this possible? Has anyone done this using C++ .NET in VS2005? Are there examples I can mimic or references that will help direct me? I have searched and searched through NI's help and found a lot of good stuff but I'm still feeling confused about the best way to utilize LV.
Thank you in advance!

One more question ... what if I could use Measurement Studio? The documentation seems to indicate that it's easy to create network applications and therefore it would be easy for me to re-create our VI's front panel using Measurement Studio components in my C++ app and then simply connect those components to the networked hardware (TCP/IP or DataSocket) that could be located anywhere in the world.
Depending on what components you are using in your LabVIEW panel, it is probably pretty easy to build a Measurment Studio application to look like a LV panel.
Given that, you could use network shared variables to move data across the network, no TCP programming necessary -- I think that this is pretty easy to do, but I don't know the specifics about variable programming in that environment. Also, you will probably need to add some smarts to the server side to make sure that it is reading to and writing from variables in an appropriate manner.
Question: why can't you just use LabVIEW for the client application also?

I have a G5 which I intend to keep. Now that I have updated my iphone 4s to iOS 7.0. I cannot add music to my iphone or upload photos to iphoto. I have the last itunes 10.6.3. which was supported by apple. itunes will not interact with my iphone on an

I have a G5 which I intend to keep.
Now that I have updated my iphone 4s to iOS 7.0.
I cannot add music to my iphone or upload photos to iphoto.
I have the last itunes 10.6.3. which was supported by apple.
itunes will not interact with my iphone on any level.
Apple made all the equipment I use.
Bentley and Ferrari etc do not stop making parts for their cars?
The least Apple could is.
A. Update itunes to run on a G5
Regarding iOS 7.0 you have totally lost the plot.
We buy apple why?
Quality.
Intuitive interface.
Stable software.
Design.
All that Steve Jobs consider sacrosanct.
Quality is about ongoing support longevity of product.
Its not about trying to sell to every person on the planet, others are way ahead of you.
So try respective the customers you have, it wont be long before theirs a better operating system and your lead in hardware is marginal.
Regards
Glyn Evans
My post on facebook this morning.
If you have an iPhone or iPad do not update to ISO 7 unless you want an operating system that looks like windows 8. The graphics looks like it was designed by a artistically challenged mongoose and the operating system is not intuitive something apple users expect. Overly complicated ugly and generally change for the sake of apples paranoia since the death of Steve Jobs.

You need to update iTunes to 11.1 on your PC

My firefox is not responding, i get a message (firefox is not interacting with windows) I have tried cleaning up cookies, catch etc nothing works. i have unenstalled and reenstalled, as soon as i type a letter firefox wont respond. Help.

As soon as i type a letter in fire fox it stops working, i get (FIRE FOX IS NOT RESPONDING, WINDOWS IS NOT INTERACTING WITH FIREFOX) I have tried all i can and now give up. Ive cleared all cookies and catch, etc i have gone in to help and tried out instructions for the not responding but no luck. I have windows 7 and have not had problems in the past with firefox. I have uninstalled and reinstalled still no luck.

go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

My safari is dark and I cannot interact with it. How can I get it to light up and be interactive?

I was using safari to open multiple pages and now it is dark . Pages come up but I cannot interact with it . Help!

I rebooted according to directions in another post . Thank you it is working now

Firefox has trouble initiating, and when it finally does, every time I attempt to interact with the application it stops responding.

Firefox won’t initialize: I can open any program on my computer except for Firefox so it isn't that my computer is slow. It doesn't open at all no matter how long I wait. I've left the room and let the computer run before and it still wasn’t running when I came back. After a few clicks it finally it comes up, and I have to wait because I’ve clicked multiple times so of course it's going to open multiple times. When I'm online after successfully closing all but one Firefox window so that I don't crash my poor laptop, every time I attempt to interact with the program via clicking a link, opening a new tab, or typing something into the URL bar, the program freezes and goes into the not responding stage. Rarely, an unresponsive script message will pop up.

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Cannot click or interact with a certain part of my screen in most apps

This is a weird one that's stumping me. Since probably Tuesday or Wednesday, I've had trouble clicking on certain portions of the screen on my MacBook. I noticed it first in Safari, and I thought that it was just a Safari problem, but now I realize it applies to the whole OS.
When I am in an app, I cannot click on anything or scroll when my mouse is on a certain portion of the screen. The weirdest part to me is that this portion of the screen is standard for every app. It's probably about the middle 50 or 60 percent of my screen in the lower third portion. Imagine cutting my MacBook screen into a Tic-Tac-Toe board... the lower middle box is where I'm having trouble.
This seems to apply to most apps, but for example in iTunes I can still click on items in this portion of the screen but only about every third click will it be responsive. With Safari and Finder and most other apps, I get nothing at all. It's not my mouse itself because it does the same thing if I'm using my Mighty Mouse or my Logitech mouse or just my trackpad. Also, if I navigate using the keyboard, I can interact with that portion of the screen just fine.
I can't recall installing or removing or changing anything significant within the past week that could have caused this, though it's entirely possible. I'm pretty good with my Mac on most things, but as I said, this one is stumping me and I can't find any similar issues by searching.
Thanks in advance for any help.

Got the exact same problem aswell, finally fed up with it now as i just started up firefox and 14 new windows opened because of this bug, luckily my computer can handle them but someone with a slower processor it would have been a nightmare, needs fixing ASAP.
Reverting back to 3.6.3 until this issue is solved. (link for anyone wanting to do the same below)
http://www.filehippo.com/download_firefox/7345/

How do I create an app to interact with my Web ? like skype or msn ?

I need to create a downloadable interface like Skype or Msn which will interact with my website that is created on PHP and MySQL...
What will be the best practices for this ? thanks in advance...

You might take a look at Adobe's AIR platform which can use HTML, JavaScript, and Flash to develop applications that work on the desktop like a regular app but can also connect/interact with a web service. But that question is more in line with the Dreamweaver Application Development forum.

How to convert an array collection instance to a complex object for interaction with webservice

Hi there,
I have a stubborn problem that I am trying to work out the best way to solve the problem. I am interacting with a WebService via HTTPService calling a method called find(String name) and this returns me a List of ComplexObjects that contain general string and int params and also lists of other Complex Objects. Now using the code:
ArrayCollection newOriginalResultsArray = new ArrayCollection(event.result as Array)
flex converts my complex objects results to an arraycollection so that I can use it in datagrids etc. Now up until this part is all good. My problem is when getting a single instance from the results list, updating it by moving data around in a new datagrid for example - I want to interact with the webservice again to do an create/update. This is where I am having problems - because these webservice methods require the complex object as a parameter - I am struggling to understand how I can convert the array collection instance back to my complex object without iterating over it and casting it back (maybe this is the only way - but I am hoping not).
I am hoping that there is a simple solution that I am missing and that there is some smart cookie out there that could provide me with an answer - or at least somewhere to start looking. I guess if I have no other alternative - maybe I need to get the people who built the service to change it to accept an array - and let them do the conversion.
Any help would be greatly appreciated.
Bert

Hi Bert,
According to my knowledge you can use describeType(Object) method which will return an XML... That XML will contain Properties and values just iterate through the XML and create a new Object..   Probably u can use this method...
public function getObject(reqObj:Object,obj:Object,instanceName:String,name:String=null,index:int=-1):Obj ect
            if(!reqObj)
                reqObj = new Object();
            var classInfo:XML = describeType(obj);
            var className:String = instanceName;
            if(name!=null)
                className=name+"."+className;
            if(index!=-1)
                className=className+"["+index+"]";
            for each (var v:XML in classInfo..accessor)
                var attributeName:String=v.@name;
                var value:* = obj[attributeName]
                var type:String = v.@type;
                if(!value)
                    reqObj[className+"."+attributeName] = value;
                else if(type == "mx.collections::ArrayCollection")
                    for(var i:int=0;i<value.length;i++)
                        var temp:Object=value.getItemAt(i);
                        getReqObject(reqObj,temp,attributeName,className,i);
                else if(type == "String" || type == "Number" || type == "int" || type == "Boolean")
                    reqObj[ className+"."+attributeName] = value;
                else if (type == "Object")
                    for (var p:String in value)
                        reqObj[ className+"."+attributeName+"."+p] = value[p];
                else
                    getReqObject(reqObj,value,attributeName,className);
            return reqObj;
Thanks,
Pradeep

Interacting with VBscript - Shell/GuiTree

Similar Messages

Maybe you are looking for