Interaction with another applications

Hi:
I would like to know if exists any posibility of communicate
or interact my flash app with another non-flash application (for
example using JNI or any kind of median layer between my flash app
and another app).
Thanks

Hi there,
Yes it is possible. You can use FSCommand("launch") to do
this.
///example:
The following example would open wap.yahoo.com on the
services/Web browser on Series 60 phones:
on(keyPress "9") {
status = fscommand("launch",
"z:\\system\\apps\\browser\\browser.app,
http://wap.yahoo.com");
Hope this helps,

Similar Messages

TS1702 I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history

I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history lost.
Tried following up with the developer's instruction. Didn't help. Developer suggested contacting Apple if their instruction didn't work. Tried the various methods recommended on the Apple site. Same result.

Telling is that you tried most of the things on the net doesn't tell us exactly what you did try, so we are all still left to guess .....
Sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again
If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
If that doesn't work, restart your router and reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Using UI Automation Framework to interact with Flex applications

Hi all,
I created a small flash app using Flex builder 4.
I am writing a tool to interact with flash applications using UI Automation Framework which is similar to UI Spy. I've read in so many forums that accessibility can be done using UI Automation or MSAA.
Using the tool, I am able to get all the fields that are present in the application. (button, text, edit fields etc). Now, I want to use InvokePattern on buttons from my tool so that, if I click "Invoke" in my tool, the associated button will be clicked in the flash app. Here, I find no issues to do anything.
But, if there is a textinput field on the flash application and I use ValuePattern of UI Automation to set some value in the field using SetValue(), then I am getting
"System.InvalidOperationException"
even when I tried simple SetFocus() on to that field, I am getting the same exception Looks like, I cannot interact with flash text fields in the same way I do with other window's fields.
I used UISpy and other tools to see if they are doing any better with setting values on a text field. But, they too failed with same exception.
Can someone tell me why this is failing? Does flex/flash support UI Automation to this extent? Are there any examples or links that can help me here?

@riatest Thanks for the info.
I downloaded flex sdk to see if there is anything that will help me. But, In flex sdk, I cannot find anything that would ease my path. I want to stick to developing in C# to talk to Flash applications. What is the best way to proceed? Are there any sdks that I can download and use for C# development to interact with the flex controls? What is the way to go? I seem not to find any good hits in the web as well
Thanks
Sailesh

Does siri, Does iPhone 4s Siri interacts with "whatsapp" application.

Does siri, Does iPhone 4s Siri interacts with "whatsapp" application.

Yes, you can have white background with black text.
Settings > General > Accessibility > Invert Colours
Note: the settings is global not just for Siri.

Can Director Interact With Other Applications?

Hello,
I am a CBT/E-Learning Developer looking for a way to author
Guided Help. I am thinking of how to develop interactive tutorials
that, instead of using screenshots of an application, interact with
the application itself.
For instance, let's imagine that a person is working in MS
Word and doesn't know how to save a file. He can click the icon for
the "Saving A File" lesson, and a caption displays on top of MS
Word that reads something like "Click FILE", along with some type
of indicator of the FILE button, such as an outline, highlight,
arrow, etc. The user clicks FILE, the File Menu drops down in MS
Word, and the next step of instructions is displayed. In this way,
the usre is guided through the steps of saving a file as he
actually performs the task in the software.
Can Director create this type of thing?
Thanks a lot,
Mike

Hi Chunick,
Thanks for replying. I used MS Word as just an example; the
type of software I'm wanting to use this for is police records
management software. I've been doing the interactive simulation
tutorials for them since 1999, using multimedia authoring tools
Demoshield and Opus Pro, and demo authoring tools RoboDemo and Demo
Builder. However, I wanted to get away from interactive tutorials
for 3 reasons:
(1) My client's software is frequently updated, and keeping
up with taking new screenshots is a hassle.
(2) I'm of the opinion that "at the moment of need", process
embedded "guided help" in the actual application is a much more
useful form of training than working through a simulation.
(3) It will greatly help my client's support staff and
training staff
I've been researching process embedded e-learning and guided
help for almost a year now. I've looked at everything from
multimedia authoring to macro software. I even found two programs
that do exactly what I want, but they are very very expensive, much
more expensive than Director.
Thanks for the tip on Hook Xtra; I'll check that out. Last
night I found an xtra called MasterApp, which may also do what I
need. I appreciate the concern about the difficulty of programming,
and I'm not a programmer (except HTML, and we all know how easy
that is). But I'm in this for the long haul, and would be using it
for potential new clients, not just my current client. I love
learning new software, and I have a membership to the IEEE Computer
Society, which gives me over 1300 online e-learning courses I can
take, including Director.
Thanks again for the lead!
Mike

Must duplicate my photo because "this photo was previously edited with another application..."

I've always used both iPhoto and Adobe Photoshop Elements for editing my photos. Previously, I could edit in the external application (Adobe PE), save the photo (back to iPhoto), go back into iPhoto and then still edit that photo within iPhoto if I wanted to.
Recently, though, if I edit a photo in Adobe PE and save it, if I attempt to edit it further within iPhoto, I am warned: "Image Cannot Be Edited: This photo was previously edited with another application or with an early version of iPhoto. Duplicate this photo to edit it."
I don't WANT to keep duplicating my photos - it's a stupid waste and I just want to tweak my previously edited photo.
When did iPhoto start requiring duplication in order to edit a photo that had been worked on in another program?
And why?
And is there any way I can change this or get around it?
Thanks.

Where are you seeing these Jpegs when you duplicate the Raw?
Duplications are virtual. Try this test.
Select a Raw and go File -> Reveal in Finder -> Original
That brings you to the Master file in the iPhoto Library. It's selected.
Apply a label to it - In the Finder: File -> Label.
Now, back to the iPhoto Window and gp Photos -> Duplicate
You now have a second snap in the Event -> My Photo - version 2
Select Version 2 and go File -> Reveal in Finder -> Original
Notice that it brings you to the same file.
So, you've duplicated the Photo, not the file.
Regards
TD

One web application - interact with many application

I need to create web application that will be interact with different applications by different protocols. On the input of this application will be different xml files (commands).The input must be implements as stream input (something like IBM WebSphere Business Integration Connect)
This web application must be consist from differents modules. Every module do the concrete task. E.g. with file1.xml - web application connect with MS Outlook. With file2.xml - web application connect with some web service and so on.
What kind of java web technology I can use to create this web application?
Thanks.

You can use web service to accept input XML for your application and remaining technology depends upon the nature of target system and your work involved. For example, to consume target system web service you can think of using JAX-WS.

Cookies (working with another application)

Hello,
I am currently working on a project. I finished everything in the project but there are many requests to bypass the login page. Currently users log on to a facutly site which then gives them the link to my application. The password for the faculty site and my own differ. They are requesting that the login page can be avoided when opening the application from the faculty site.
I read a similar thread at Re: How to co-work with another application with Cookie or something
So, the faculty page would authenticate. My application uses the same database, but should work well as is. There is no transfering of information between applications. Basically all my application needs to do is log the user in automatically.
I believe this is done via cookies. I've tried some OWA_COOKIE procedures, but I think I am doing it all wrong. It is an area that I've never covered.
Any help would be great. Thanks
-Tim

On a further note,
I used the same logic as in the thread Re: How to co-work with another application with Cookie or something
On page 150 I set the cookie using:
begin
owa_util.mime_header('text/html', FALSE);
owa_cookie.send(
expires => sysdate+10,
name=>'TEST',
value=>lower('testing'));
wwv_flow.g_unrecoverable_error := true;
owa_util.redirect_url('f?p=&APP_ID.:200:&SESSION.');
exception when others then null;
end;
Then on page 200 I read it using:
declare
v varchar2(255) := null;
c owa_cookie.cookie;
begin
c := owa_cookie.get('srprt');
:TEXTFIELD1 := '';
:TEXTFIELD1 := c.vals(1);
exception when others then null;
end;
this works. So what I would like to do now is read in a cookie from the other site. Is this at all possible?

How to interface a tuxedo app with another application that uses tcp/ip socket messaging

How would you interface a tuxedo app with another application that
uses tcp/ip socket messaging? I have a vendor product that offers
a tcp/ip message interface, and would like to know how best to
integrate it into a tuxedo application. I could write a C application
that listens and accepts incoming request from the vendors application,
and then make a tuxedo client call to a service. But this doesn't
allow me to control the listen thread through tuxedo. The C application
would have to be started seperately and would not take advantage
of the tuxedo restart facilities etc of a tuxedo service.

You can make an empty server only with tpsvrinit that starts your client
listeners and a tpsrvdone that stops them. Be carefull with sharing ipcs
between processes, or your clients may get puzzled!!!
Another choice can be builting a custom WSL/WSH but I haven't done
this yet and I don't know exactly the troubles related with making them.
R.G.
Travis Ward wrote:
How would you interface a tuxedo app with another application that
uses tcp/ip socket messaging? I have a vendor product that offers
a tcp/ip message interface, and would like to know how best to
integrate it into a tuxedo application. I could write a C application
that listens and accepts incoming request from the vendors application,
and then make a tuxedo client call to a service. But this doesn't
allow me to control the listen thread through tuxedo. The C application
would have to be started seperately and would not take advantage
of the tuxedo restart facilities etc of a tuxedo service.

Open with another application

Is it possible to open a photo with another application, without a pre-conversion to tiff by Lightroom? I love Active D-Lighting, it saves me a lot of shadow/highlight recovery, but Lightroom doesn't support it. I edit most of my photos with Capture NX, but I use Lightroom to catalog them and edit others. I can't find a way of opening a nef file directly in CaptureNX from Lightroom.
Thank you.

You can open a photo with another application, but not from within Lr (except for Photoshop). You can open NEF on Capture NX by locating it in your OS (Mac Finder / Win Explorer) and go <Open with> but there is no way to do that from within Lr.
And, when you open a NEF in Capture NX that has previously been edited in Lr the edits will not be visible in Capture NX. And the vice versa is also true: if you edit a photo inCapture NX these edits will not be visible in Lr.
This is so because both programs write the edits in a proprietary format that can only be read by the program writing it. Apart from that Lr stores the edits in its catalog which can only be read by Lr.
It all comes down to the following: You either edit in Lr or you edit in Capture NX, but a cross-over editing is not possible - unless you create a TIF after the edit and open that in the other program. By creating a TIF the edits are written into the image pixels which then can be read by any photo editing software - if it can open and read TIfs that is.
BTW: The Active D-Lighting works only if you shoot JPGs - as far as I know. Far better would be to shoot Raw and edit the highlights in Lr.

Interaction Flash Lite with another applications

Hi:
I would like to know if exists any posibility of communicate
or interact my flash lite app with another non-flash application
(for example using JNI or any kind of median layer between my flash
app and another app). This non flash app may be a java app for
example or another symbian app that I have developed
Thanks

Hi there,
Yes it is possible. You can use FSCommand("launch") to do
this.
///example:
The following example would open wap.yahoo.com on the
services/Web browser on Series 60 phones:
on(keyPress "9") {
status = fscommand("launch",
"z:\\system\\apps\\browser\\browser.app,
http://wap.yahoo.com");
Hope this helps,

Web interaction with client application

Hi all,
I have self taught myself Java over the last 4 years on and off.
I am in the mid stages of developing an MRPII application with various modules. These modules are effectively JTabbedPanes within JInternalFrames. The JInternalPanes are within a JDesktopPane which also has JTabbedPanes.
This enables me to have departmental tabs at the top of my app and module functions at the left hand side, dependant of which departmental tab is selected.
I have created a class that connects to MySql and can do various functions which I then can derive specific MRPII classes.
I have a desktop PC which I have MySql configured as a server and a laptop which is configured as a client. Both machines run WindowsXP and my router is a linksys.
With this setup both machines can check inventory, take orders, produce purchase orders, create customers & vendors etc....
My next step is to try and incorporate a web component into this.
My ideal goal is to have a database that is set up and hosted on the web and works in the same way as my home network. This would enable me to deploy this application and configure the ODBC data source to point to an IP address. Is this possible and if so how would I go about it.
The other option is to create web pages with forms that interact with my local server. If this is the better option, I am unsure whether I should learn about servlets or possibly XML, as all I have learned so far is about applications.
Your guidance would be greatly appreciated.
thanks
Jim.

I wouldn't let client applications connect to a database directly. What if you make a change to the database in order to fix a bug for example, that would mean rebuilding the clients and redistributing them and in the mean time any old client is most likely broken.
I would let the server communicatie with the database locally and expose either an XML-RPC or a SOAP connection to clients. This makes your framework extendible and abstract, all you do is implement SOAP methods on the server that your clients will invoke. As long as the response of such a call never changes you do not need to change your clients. And who knows, you may even use additional data sources (other databases for example) on your server, your clients will never have to know about it.
If you want to learn about SOAP, check out Apache axis.
http://ws.apache.org/axis/index.html

Interact with another process

Does anyone know how can I make my program send/read text from another program? Let's say that my active window is Notepad. I would like to be able to insert text and also read what has been typed (i.e. it would copy & paste).
Any macro program can do that, but I want to treat the data with Java.
Thanks.

If what you want is just a copy&paste tool wich can interact with other programs, you can try the api clipboard from awt:
import java.awt.datatransfer.Clipboard;
import java.awt.datatransfer.ClipboardOwner;
import java.awt.datatransfer.Transferable;
import java.awt.datatransfer.StringSelection;
import java.awt.datatransfer.DataFlavor;
import java.awt.datatransfer.UnsupportedFlavorException;
import java.awt.Toolkit;
it can be useful:
// clipboard
public void getClipboardContents() throws Exception
     BufferedReader in;
     Clipboard clipboard = Toolkit.getDefaultToolkit().getSystemClipboard();
     Transferable contents = clipboard.getContents(null);
     boolean hasTransferableText =(contents != null) && contents.isDataFlavorSupported(DataFlavor.stringFlavor);
     if ( hasTransferableText )
          in = new BufferedReader (new StringReader((String)contents.getTransferData(DataFlavor.stringFlavor)));
          String linea = in.readLine();
          while (linea!=null)
               linea = in.readLine();
          in.close();
public void setClipboardContents( String aString )
     StringSelection stringSelection = new StringSelection( aString );
     Clipboard clipboard = Toolkit.getDefaultToolkit().getSystemClipboard();
     clipboard.setContents( stringSelection, this );
the clipboard can be fullfilled from any app and read from java because it's a sysyem pool, but you cannot receive events from windows apps like notepad, you can copy notepad's text and paste it to your java app.

Firefox has trouble initiating, and when it finally does, every time I attempt to interact with the application it stops responding.

Firefox won’t initialize: I can open any program on my computer except for Firefox so it isn't that my computer is slow. It doesn't open at all no matter how long I wait. I've left the room and let the computer run before and it still wasn’t running when I came back. After a few clicks it finally it comes up, and I have to wait because I’ve clicked multiple times so of course it's going to open multiple times. When I'm online after successfully closing all but one Firefox window so that I don't crash my poor laptop, every time I attempt to interact with the program via clicking a link, opening a new tab, or typing something into the URL bar, the program freezes and goes into the not responding stage. Rarely, an unresponsive script message will pop up.

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have a macbook pro from 2009 and the software is 10.5.8 how do i update it so i can have more interaction with the applications

i have a macbook pro from 2009 and the software is 10.5.8 how do i update it so i can have more interaction with the applications

Note some programs may not work with Lion or later
Upgrading to 10.7 and above, don't forget Rosetta!

Interaction with another applications

Similar Messages

Maybe you are looking for