Interactive report limits tabular form pagination.

Hey All,
I am running into a problem and I was unable to find an answer on the forum, however I did find that someone asked the same question but did not get any replies. So I will ask it again.
Pagination problem with interactive report and multi row update form
I created a page which contains both an IR and a tabular form. The IR behaves correctly and there are no issues. The tabular form on the other hand is not functioning properly. The problem I am having is that the tabular form will only paginate to the rows that are currently being displayed in the IR. For instance if I am viewing rows 6-10 on the interactive report the tabular form will start from row 6 even if my pagination scheme is set to view in increments of 20.
Another example is if the IR is is viewing rows 6-10 and the tabular form is viewing rows 1-2. If I paginate on the tabular form it will jump to rows 6-7 regardless of where its last position was.
So in short it appears that my tabular form always starts from the first row currently being viewed in the IR. Is there a work around for this or should I just ditch the interactive report?
http://tryapexnow.com/apex/f?p=700:2
I made a sample for you to check out.
Cheers,
Tyson Jouglet

Munky,
Thanks for the suggestion. It does indeed allow me to paginate but I hate the alert you get when PPR is enabled for a tabular form and unfortunately so do the users. :(
Cheers,
Tyson Jouglet

Similar Messages

Add row to tabular form pagination problem when sorted

Hi,
I have a problem with a tabular form that has various sortable columns. If the user tries to add a row when the sort order is set to something where possibly the nulls are appearing first in the list, then the user cannot enter any data (since the last page of results is always shown after clicking the add row button).
I know the empty record is in the list somewhere since the pagination page count is increased by 1, but there is no way for the user to enter data into that record since traversing back pages then removes the empty record. How can I fix this? Is it possible to programatically reset all column sorting?
Cheers!

Hi,
Sort orders in reports are stored as user preferences - these can be removed using PL/SQL. Have a look at: Need to do column SORTING only when I click the column heading and Re: Default sort and pagination placement not working in reports
Or, you could try adding a blank row in your SQL statement itself: Problems With "Add A Row"
Andy

Pass Interactive Report Filters into Form

Hi there,
I've got a set of interactive reports which act as a drill-down through information. At each level there is a "Create" button, which presents a form for creating an item at the bottom level. The user does not have the ability to change the filters.
For the top level, showing an empty form is fine. However we would like it if at the lower levels the values which have been filtered are passed into the form.
Sort of like:
Companies -> Create [New Employee]
- Divisions [Company = Company] -> Create [New Employee - Company = Company]
-- Location [Company = Company; Divsion = Division] -> Create [New Employee - Company = Company; Division = Division]
if that makes any sense?
Cheers,
Andrew
Edit: I've tried using IR_[Name] and #IR_[Name]#, no effect (unless I'm doing it wrong)
Edited by: ad13 on 12-Aug-2009 02:38
Edited by: ad13 on 12-Aug-2009 02:39

Hi Andrew,
It makes no sense to me. Are you saying that e.g. you select marketing department and then on the page navigated to your query shows people in the marketing? Or it automatically sets that persons department to marketing so when clicking "create" the user doesnt have to specify a department? If so then have a hidden item on the new page e.g. :P2_DEP. The previous page will send have a link on the department column which passes the value to this item. The insert statement (for create) or select query (for a report) will use this item as a basis for their process.
If neither then explanation take 2 =)
Mike

Multiple interactive reports/tab. forms: future or everlasting expectation?

At the end of September, the statement of direction for APEX is updated for 4.2.
I notice that there's not a word anymore about the possibility to use multiple interactive reports and tabular forms on one page (declarative, without the tricks described in so many blogs and forums).
Does this mean that it will never be possible or just not yet in 4.2?
Thanks in advance for any enlightening comment about this :-)
Regards,
Bart

Bart, Joe,
Thanks for bringing this enhancement request up again. Allowing for multiple tabular forms or multiple interactive reports on one page is still a feature that we’re considering for a future release of Oracle Application Express. But we honestly don’t know yet whether this is going to make it into APEX 4.2 or a later release. And yes, there’s certainly a chance that this may proof to be too disruptive to the current implementation, and thus require a different approach. I realize this isn’t the answer you were looking for, but all we can say that we’re still actively looking into making this possible as a standard feature.
Regards,
Marc

Need customized query on updateable report (tabular form)

I have a pl/sql function that returns a SELECT statement based on very flexible query specifications allowed in a form. (Form has a field for each table column, allows operations like <,>,between, etc, that can be entered directly into the field; all fields need not have some sort of query constraint specified. Essentially the same sort of query flexibility you get in Forms... ) The select always returns the same number of columns. Query results are returned on a different page (either report or tabular form) than that used to enter the query specs.
The function works beautifully on a page type of Report.
However, when I take a Tabular Form and switch its query source to PL/SQL function body returns SQL select, the page type becomes Report. The query works on this modified page (returns correct rows), and the columns are still editable (can be typed into) but the changes can't be submitted because the page is no longer a tabular form -- Error is: No updateable report found. Multi row updated and delete operations can only be performed on tabular forms of type 'Updateable Report'.
How can I have flexible query specs paired w/ an updateable report? Does this require writing my own multi-row DML processes? Or is there a simpler way?
Thanks,
Carol

I have a pl/sql function that returns a SELECT statement based on very flexible query specifications allowed in a form. (Form has a field for each table column, allows operations like <,>,between, etc, that can be entered directly into the field; all fields need not have some sort of query constraint specified. Essentially the same sort of query flexibility you get in Forms... ) The select always returns the same number of columns. Query results are returned on a different page (either report or tabular form) than that used to enter the query specs.
The function works beautifully on a page type of Report.
However, when I take a Tabular Form and switch its query source to PL/SQL function body returns SQL select, the page type becomes Report. The query works on this modified page (returns correct rows), and the columns are still editable (can be typed into) but the changes can't be submitted because the page is no longer a tabular form -- Error is: No updateable report found. Multi row updated and delete operations can only be performed on tabular forms of type 'Updateable Report'.
How can I have flexible query specs paired w/ an updateable report? Does this require writing my own multi-row DML processes? Or is there a simpler way?
Thanks,
Carol

Pass value from previous interactive report to create record form

Hi All,
I am an APEX newbie and have an APEX 3.2.1 application that is still being developed that is working reasonably well. The problem I am having is the following:
I have 3 interactive reports. These are defined on their respective tables, namely, clients, servers, and databases. By clicking on a client name, it shows the servers that are associated with that client. By then clicking on a server, it shows me the databases that are on that specific server. I am able to perform updates, deletes and inserts on all of these.
In order to say create a server, i click on the name of a client and it brings me to the Server Interactive report to see the associated servers. I then click a "Create a Server" link that brings me to the create a server page. The issue i am having is that I would like to have the previous value of the primary key (Client ID) passed from the Server interactive report to the form where i create a new server so that the client ID is already populated in the Create a Server form. Presently, the only way i am able to do this is by defining the client ID column on the Create a server form as a select list and displaying ALL the different clients. By selecting a client name, this list then returns the client id associated with that client name. This is a potential source of confusion for the users and it would be much better if the client ID was already in a text field that is disabled and all they have to do is fill out the other fields of the form.
I would greatly appreciate any help in this matter as I am fighting project deadlines. I have seen other examples that are similar, but i am still experiencing difficulty.
Thanks,
Tim

Hi,
I am still very confused as to how to get this to work.
I cannot have the value passed by clicking the client ID link from the Server Interactive Report in order to populate the Client ID field in the Add Server Form. It MUST be done by clicking an Add Server button that will pass the value as well as take me to the Add Server Form. So far, I have only been able to have the value show up if i click the client ID column on the Interactive report that has a column link defined as follows:
Name VALUE
P9_CLIENTID #CLIENTID#
However, when i do have the value passed this way i receive the following error message which proves that it is not saving the god damn state!
ORA-01400: cannot insert NULL into ("USERS"."NEW_SERVERS"."ClientID")
Error Unable to process row of table NEW_SERVERS.
Even if the value appears in the text field, it isnt really there!
How to make it know the value is there is beyond me.
I dont know what to think of this situation. I have tried all types of settings and I have a feeling it will be 2010 before this is resolved.
It is really frustrating, it has been days i am trying to get this to work...
Thanks,
Tim

Link column - populating a form from an interactive report?

Hi
I have an interactive report which works great. I have now added a link column which leads to a form in my application,
How can I link the records in the interactive report with the form, so when a user clicks on the link column the form is populated with the details of that record from the interactive report?
Hope this makes sense

Hi,
The easiest way is to create it using wizard when you create a page:
Create Page -> Form -> Form on a Table with Report
The link will be created automaticaly on the base of the table Primary key or Rowid.
Otherwise: On the created Form there should be a page process called similar "Fetch Row from TABLE" (it is automated row fetch process)
There should be defined the primary key Item.
Now you can fill this item in report link attribute:
Link to Page -> your Form
Set the item Name and Item Value parameters:
FORM_ITEM_PK #REPORT_ITEM_PK#
If the Form is based on another table -> just use
Link to Page -> your Form
Set the item Name and Item Value parameters(here you can populate more fields - but there will be good to use some dynamic action instead):
FORM_ITEM_1 #REPORT_ITEM_1#
FORM_ITEM_2 #REPORT_ITEM_5#
FORM_ITEM_3 #REPORT_ITEM_3#
Regards
J :D
Edited by: jozef_SVK on 16.7.2012 4:22

How to set more then three items in report with a form

Hello,
I have an interactive report with a form. In the interactive report i want to set the more than three form items, how can i do this.
can anyone help me ot with this.
Thanks,
Orton

More than 1 name/value pair can be entered for each item of the column link: just separate them with commas (','), and ensure that the order of the names and values matches.
(Please change the handle in your forum profile to something better than "user11940294", and in search the forum before posting: this topic has occurred a number of times.)

Second LOV based on First LOV in Oracle APEX tabular Form

Hi,
I had created a tabular form in which I am having two LOV's. This form is based on a query.
I had created a javascript function which internally calls AJAX and populates the second LOV based on the value selected in first LOV when onchange.
But the issue is, when the user recalls this APEX page to view the details or edit the details, the second LOV shows all the values instead of showing only the values related to first LOV.
In the second LOV query I am trying to write the below query.
select function_name fn
,function_code_id fci
from catering_function_codes
where function_type_id = NVL(#FUNCTION_TYPE_ID#,function_type_id)
order by to_number(function_code_id)
in which #FUNCTION_TYPE_ID# is the value of first LOV. But I am getting the below error.
report error:
ORA-20001: Error fetching column value: ORA-06550: line 1, column 187:
PL/SQL: ORA-00911: invalid character
ORA-06550: line 1, column 7:
PL/SQL: SQL Statement ignored
How can you refer to the Second LOV the value of First LOV in a report based tabular form?
Kindly let me know if you do not understand the issue.
Please help me in this issue.
Thank you
Regards
Dev

Hi Roel,
Thank you for the quick reply.
I used the query as given by you. This time it is not giving any error but showing all the values in the second LOV irrespective of what ever value is present in the first LOV
This is an apex tabular form which is generated by apex based on a query. The controls will be dynamically generated by APEX for each row. How can we hard code the control name to :P99_FUNCTION_TYPE_ID?
Please help me in this issue. Thank you
Regards
Dev

Require assistance in Interactive Report based in APEX 3.2

Hi All,
Thanks in advance
I have created editable Interactive report based on Form with report .
once report created , I have modified query with the column named TempNetto ,Temp Brutto .. Below is the query
select "IDSUB",
"JAHR",
"IDMITARBEITERLISTE",
"EKPREIS",
"WEBUCHUNGEN",
(WEBuchungen*EKPreis) TempNetto , --modified
"NETTO",
DECODE((WEBuchungen*EKPreis),0,0,(Netto+(Netto*VerwaltungskostenZuschlag)+(WEBuchungen*InfrastrukturkostenZuschlag))) TempBrutto, --modified
"BRUTTO"
from "#OWNER#"."SUBS"
I receieved the below message "You have requested to change the Interactive Report query. If you added columns to the query, they will not be displayed when the report is run. You will need to use the actions menu and either select the columns or click Reset. If you removed any columns from the query, it will disable existing filters, highlight rules, and other report settings referencing those columns. Please confirm your request. "
I want the column started with temp should appear in report . I have checked under search bar Action menu is checked and options like Select column and Reset is checked
Kindly provide some help
Cheers
Sachin

Hi,
When you've selected all the columns (Select Columns) you then need to save the report...not reset it. Go back and make sure all columns are on the right and then:
- Save Report
- As Default Report Settings
- Apply
Mike

Unable to delete row(s) from tabular form

Hi!
I created report with row selector, when I select one row I get tabular form regarding to the selected row from report. I can insert and update data from tabular form, but I have problem with deleting them. Error I get is ORA-01403: no data found (Row 207589)My tabular form is created by wizard and primary key is managed by database rowid, I use apex 4.1 an 10g database.
Do you know for any solution for my problem?
Regards,
drama9346
Add:
For creating report and tabular form I use code and suggestion from this thread: {thread:id=2490862}
Edited by: drama9346 on 28.1.2013 1:51

Hi,
I tried everything I know and I didn't solve my problem.
Can anyone give me some clue?
Regards,
drama9346
Add:
I solve my problem.
Edited by: drama9346 on 29.1.2013 1:52

Link column from an interactive report to insert a row in a tabular form

Hi, I need your help, i'm new on APEX and i really need to make a "link column" from an "interactive report" to insert a row into a "tabular form".
I mean that when you click the "link column" instantly create a new row in the Tabular form with the information of the linked row on the interactive report. Its something like that.
I really appreciate your help.
Ricardo Capuz

Hi Ricardo,
You can use the following code as per your requirement (this is just an example),
(In this case IR report is in Page#1 and Tabular form is in Page#2),
On Page#1, Create a hidden item (i.e 'P1_ID')
IR Report query as like the below,
select empno,
ename,
job,
mgr,
hiredate,
sal,
comm,
deptno,
empno "copy"
from empUse the below JS code in Page HTML Header section,
function f_insert_row(pSub)
$s('P1_ID',pSub);
doSubmit('ADD');
Edit Report Attribute -> copy column -> Under Column Link
Link Text: Select your column name (i.e. #EMPNO#)
Target: URL
URL: javascript:f_insert_row(#EMPNO#);
Then create a process to insert like below,
BEGIN
insert into emp_test (select * from emp where empno=:P1_ID);
END;Process condition as * Request=Expression1* in Expression1 as 'ADD'.
At last, create a branch to Page#2, Check 'include process success message' and with the same condition as * Request=Expression1* in Expression1 as 'ADD'.
Thanks,
Lakshmi

Manual Tabular Form Generation in Interactive Reports

Dear All;
I used the following statement to generate a tabular form in an interactive report region;
SELECT
id No,
apex_item.text(1,C1,3,4, ,'f01_#ROWNUM#') C1
from test_table
The no of items on the form depends on the number of rows in test_table. However, I am unable to reference the individual cells in the form. it turns out apex is using the same id for each row( f01_#ROWNUM#) in the generated source code and is not substituting rownum for the row number (eg. f01_1 for first row, f01_2 for second row generated in a normal report template). Is there something I'm doing wrong or is this a bug? I am running on apex 4.0.1
Any assistance will be greatly appreviated.
Benedict.
Edited by: Zulu on Sep 11, 2010 2:16 PM
Edited by: Zulu on Sep 11, 2010 2:29 PM

Hi Trent,
It is working fine now... " You have saved my life and I am eternally grateful" :-) .
Br,
Benedict.
Edited by: Zulu on Sep 12, 2010 7:44 AM

Tabular form validation(Checkbox) is not working for Interactive report

Hi,
I am using the oracle apex 4.0 and oracle 11g.
I have written a below select query on interactive report as
select
apex_item.checkbox(1,RESIDD)||apex_item.hidden(2,RESIDD) row_selector,
apex_item.text(3,RESNUM) as resnum
from "PDRRES"
and written the validation to display the error message( Function returning error text ) as
DECLARE
vRow BINARY_INTEGER;
BEGIN
-- apex_application.g_print_success_message := NULL;
FOR i IN 1 .. apex_application.g_f01.COUNT
LOOP
vRow := apex_application.g_f01(i);
apex_application.g_print_success_message := apex_application.g_f01(i)||'-'|| apex_application.g_f03(vRow) ;
END LOOP;
END;
Output : No data found error message
As far as it work for sql report with above logic because apex built in row selector
but it fails in case of interactive report for some reason.
Please suggest.

Saroj Nayak wrote:
Hi,
I am using the oracle apex 4.0 and oracle 11g.
I have written a below select query on interactive report as
select
apex_item.checkbox(1,RESIDD)||apex_item.hidden(2,RESIDD) row_selector,
apex_item.text(3,RESNUM) as resnum
from "PDRRES"
and written the validation to display the error message( Function returning error text ) as
DECLARE
vRow BINARY_INTEGER;
BEGIN
-- apex_application.g_print_success_message := NULL;
FOR i IN 1 .. apex_application.g_f01.COUNT
LOOP
vRow := apex_application.g_f01(i);
apex_application.g_print_success_message := apex_application.g_f01(i)||'-'|| apex_application.g_f03(vRow) ;
END LOOP;
END;
Output : No data found error message
As far as it work for sql report with above logic because apex built in row selector
but it fails in case of interactive report for some reason.
Please suggest.NO DATA FOUND usually occurs when an i mplicit select does not find anything. It can also occur when referencing a collection element that has not been defined.
You have 2 collectinons in the code you posted, apex_application.g_f01() and apex_applciation.g_f03. Since you are looping therough the COUNT attribute of g_f01 its reference ("I") is probably okay and the value store in vRow is probably not right. You can check this by using RAISE_APPLICTION_ERROR to see the value something like
raise_application_error(-20000,'vRow="'||vRo2||'"');Remember that working with checkboxes is tricky. If the box is not checked nothing will be sent. You may need to define a default value when no value is submitted.

How to change Number of Rows in a Tabular Form report page?

Hi
I am working with a tabular form to create an attendance sheet for a school using Oracle Application Express 3.0.1.00.12. Whenever I change the Number of Rows value from 10 to 1000 in the Layout and Pagination section of the report page, the SUBMIT button is not working and it is unable to process at that stage. How can I change the valu so that I can see all the rows in a single page, make changes to all rows and submit the page rightaway. Please help me.
Thanks,
Chak
Edited by: user520137 on Jan 12, 2010 12:04 PM

Hi
I am working with a tabular form to create an attendance sheet for a school using Oracle Application Express 3.0.1.00.12. Whenever I change the Number of Rows value from 10 to 1000 in the Layout and Pagination section of the report page, the SUBMIT button is not working and it is unable to process at that stage. How can I change the valu so that I can see all the rows in a single page, make changes to all rows and submit the page rightaway. Please help me.
Thanks,
Chak
Edited by: user520137 on Jan 12, 2010 12:04 PM

Interactive report limits tabular form pagination.

Similar Messages

Maybe you are looking for