Interactive report - Problem in coming back to the same cursor position

Hi,
I have an interactive report. In the first list of the output, a set of data will be displayed. In that first list, if I double click on a field, it goes to a Custom Screen. There, I have to enter some data and save and come back to the first list of the output. This is what my report does.
I have no issues when the output in the first list is one page. But, when I have the output for more than one page I have a problem. I am going to the 2nd or 3rd page of the output. From there I double click on the field and it goes to the Custom screen. After saving the data in the screen, when I click BACK button, it displays the report from the first page again instead of displaying the output in the 3rd page where I double clicked.
My requirement is, when I come BACK from the screen to the list, the cursor should stay in the same page where I double clicked earlier. It shouldn't go to the first page of the list again.
To my knowledge, we have to use a statement in the code after displaying the output.
Could someone tell me how to do this..?
Thanks in advance.
Best Regards,
Paddu.

Have a look at the ABAP command "scroll list"... you will need to hold onto the values of sy-lsind, sy-cpage, and sy-staro prior to the call to your popup, and then after you come "BACK" from this, you will need to re-write your report followed by something like:
scroll list index gs_rpt-lsind "gs_rpt used to hold the previous SY- values
to page gs_rpt-cpage
line gs_rpt-staro.
Jonathan

Similar Messages

HT1430 I have reset all my settings and content of my iphone 3GS but for the last 3 hrs I am stuck at the apple logo and after sometimes its getting off and on by itself but what is coming back is the same apple logo and nothing else is happening. pls adv

I have reset all my settings and content of my iphone 3GS but for the last 3 hrs I am stuck at the apple logo and after sometimes its getting off and on by itself but what is coming back is the same apple logo and nothing else is happening. pls advice.

Read https://discussions.apple.com/thread/4875757?start=0&tstart

Interactive Report with Declarative Filter pointing to the same page

I want to apply the declarative filter that will be applied to the IR in the same page. Can anyone let me know the settings to be done.
Thanks
Deb

A redirect will not work - we render your page and you enter your value but then you never submit the page to be written to sessions state, rather, you call the page again. You need to create a button that submits the page and then a branch to the same page that passes the same parameters. That said, I created a test case and found some sort of bug with passing an IR condition in a branch - it is failing with an odd error. We are looking into that. In the meanwhile, is there a reason you need another item to do your filter and cannot just use the built-in capability of the interactive report?
-- Sharon

3.1 Interactive Reports don't support Download filenames the same as before

I converted an existing report to an Interactive Report.
1. It failed to copy the Download Filename as part of the conversion (bug?).
2. Download filenames don't support items the same as before:
In 3.0 I had a filename: RMS_&P3_REGION..csv
This would substitute the value in item P3_REGION.
Now, if I put the same thing in, it tells me that file extensions are not allow.
If I take out the ".csv", I still get the same error, probably because of the period at the end of the item reference.
Is there a way to have a dynamic Download filename anymore?

Steven,
I tend to think this is related to a bug I reported earlier. Substitution string not working in interactive report
Hope the Apex team will pick up this one as well.
Jacob

When i play in the pogo rooms to join a room it keeps saying to shut off popup blockers, i have tried and it keeps coming back saying the same thing no matter what i do

this has been going on for days now either it will play or it wont play. when i try to go in the canasta rooms or any room that youhave to join it it will go thru the stages and come back sayin gshut off pop up blockers. i have tried i just installed google chrome and went thru all of that and it still doesnt work. so i uninstalled it. now i have just internet explorer and its doing the same thing. i have tried foxfire and it does it too. i even went thru pogo live chat help but nothing works please help

http://support.apple.com/kb/HT1274

How do you get your computer to authorize for Itunes. I tried and it keeps coming back to the same ?? of do I want to! Help

I continue to get the message to auhorize my computer but every time I say yes it continues to ask me the same question. What do I do?

Click here and follow the instructions.
(60210)

Was trying to install windows 8.1 but didn't install bootcamp first. Am in a loop. Keep coming back to the windows setup page. What to do?

Was trying to install windows 8.1 but didn't install bootcamp first. Am in a loop. Keep coming back to the windows setup page. What to do?

Please reset NVRAM - Startup key combinations for Intel-based Macs - Apple Support and OS X Mavericks: Reset your computer’s PRAM. You have Bootcamp settings in the nvram that are causing problems.

ABAP interactive report problem

ABAP - Interactive Report problem.
In Interactive report when I double click to one field a window arises (here sy-lsind = 0) displaying some required info. And again after double clicking the appeared window another window will open (here sy-lsind = 1). from the 2nd window I can't go to the previous window.
If there is only one way to go to the previous window is to activate the RIGHT UPPER CROSS OPTION of the particular window, then please help me giving the code or idea about how to activate it. Thanks.

Moderator message - Welcome to SCN
Cross posting is not allowed in these forums.
Please read [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Thread locked
Rob

Vibration and coming back to the start screen or b...

For a week my ph is behaving abnormally. When ever I am opening any app it is coming back to the start screen or Bing or listening feature is opening
I have Thrice hard reset my phone but still facing the prob. Pl help. And let me know if this is a hardware or software issue.

Hi, swarupshan.
For which phone model is this? When was the last time you updated the phone's software? Make sure that all of the system apps are updated. See this: http://nokia.ly/1jvpb7l.
BTW, since you mentioned in your post that "I have Thrice hard reset my phone but still facing the prob". Did you go to the Settings > About > Reset your phone? Considering that you already did this, but it does not fix the issue.You can try recovering the phone's software using the Nokia Software Recovery Tool. If possible, make sure to make a backup as doing this will delete all the data that are saved on the phone. See this: http://nokia.ly/1g15S00.
Thanks. Have a nice day!

HT1766 After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music s

After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music screen?

Well, it's certainly behaving as though the phone that was backed up was synced to a different iTunes library.
I'm going to throw one more thing out there... Yes, you backed it up to this computer... Was the phone previously set up to sync with this computer? Or was it syncing with a different computer and you just backed it up to this one?
You may have to end up setting it up as a new device and rebuilding the phone by manually re-syncing your data, apps, music, etc. to the phone.
Trying to keep your library on a different drive can be tricky. If iTunes starts up and the library isn't available, it may end up generating a new library ID, meaning that you could easily find yourself in exactly the position you're in now...
I'm curious why there was a need to restore your phone to begin with... It may not have any bearing on this at all, but it could.

How do I delete all my contacts and folders to start off new again as they just keep on coming back all the time?

How do I delete all my contacts and folders to start off new again as they just keep on coming back all the time after deleted?
Is there an email address for better communication as this way I find extremely difficult?

check your account settings, possibly under advanced settings.
look for an option to check "remove messages from server" or similar.

I have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.

i have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.

Might be corrupted preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.desktop.plist
Click Go then move the com.apple.desktop.plist file to the Trash.
Restart your Mac and try changing the desktop photo.

8Gb Touch 2nd gen problem. Only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem

I have an iPod Touch 8GB 2nd gen and it's only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem.
Any idea what I can do to fix this?

you can connect the iPod to iTunes in recovery mode:
Hold down the Home button and the Power button simutaneously, until the screen goes black and the device turns off.
Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device
and restore it to default settings, in order to remove your password (or just remove your password directly from the iPod touch, in order to sync with iTunes)

Coming back to the Transaction from a User Exit

Hi,
I perform some checks in a User-Exit before saving a transaction & throw an error message if something is not proper. But, the transaction terminates after that. I need to give the user an option to make changes in the transaction. eg, if user exit checks if a certain field should not be empty, the user should have an option to enter the field after the user exit throws the message. How can i go back to the same screen from the exit to achieve the same.
Thanks in advance.
Bikash
This was for a general scenario wherein after an error message triggered by an Exit is displayed, the transaction just terminates.
Message was edited by: Bikash Agarwal

Hi,
If you give error message, it will leave the current transaction.
Instead try using some POPUP function module, which will have options 'OK' and 'CANCEL'.
If user presses 'OK', then allow user to do modifications and if he presses 'CANCEL', then write LEAVE PROGRAM to come out of transaction.
Hope it helps.
Regards,
Shashank

My iphone will not set up as a new iphone and it constantly goes back to the same screen when hit set up as new iphone how to fix this?

I just updated to 6.1.3 not knowing that i would ahve to completley reset my iphone because i did this while jailbroken, wanted to get rid of it anway but not when i try to set up my idevice as a new iphone via itunes it doesnt do anything i click on it and it takes me to my music and does nothing i click on the iphone thing and it takes me back o the same screen asking do i want restore or set up as new ihpone i have tried both and they do the same thing which is nothing. i even tried to reset it again by putting it in dfu mode nothing is working.... If anyone could please help ive had this iphone for awhile now its a 4s got it in feburary ive never had any problems like this Any solutions please.......

But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button

Interactive report - Problem in coming back to the same cursor position

Similar Messages

Maybe you are looking for