Interactive report with control break displays no data, until control break is unchecked

Hello,
I have an interactive report that is base upon a collection. When one first access the page the report shows no data(no errors are given) and the control break box is red. Once the control break box is unchecked, all the data is shown. Furthermore, navigating to another page causes the same issue.
Any idea into how I can solve this issue will be appreciated.
Thank you,
Apex 4.2
Oracle 11g 2.0.3
Apache Tomcat
Guyenko

Vincent,
The aggregates are applied to each control break group, or, if you don't have any, then they're applied to the full report. So, in your case the "count" (= count of non-null values for a column, same as in SQL) should mean there is 1 non-null value in each group.
Does that description match what you're seeing?
- Marco

Similar Messages

How to export interactive reports with control break

Hi to all,
I have this interactive report:
select "Work ID", MA01_WORK_GROUP_ID, "Relco",
"Data Esecuzione", "Stato"
from (
SELECT ma01.ma01_work_id as "Work ID", ma01.ma01_work_type_id, ma01.MA01_WORK_GROUP_ID,
MA01.MA01_START_DATE as "Data Esecuzione",
MA01.MA01_END_DATE as "Data Fine Esecuzione",
(SELECT ma07.ma07_system_id
FROM mobi_aes.ma07_work_system ma07
WHERE ma07.ma07_work_id = ma01.ma01_work_id
--and ma07.ma07_SYSTEM_TYPE_ID = 10
and ma07.ma07_SYSTEM_TYPE_ID in (10, 70, 90)
AND ROWNUM < 2) AS "ID Contatore",
(SELECT ma03_value
FROM mobi_aes.ma03_work_metadata
WHERE ma03_work_id = ma01.ma01_work_id
AND ma03_name = 'FORNITURA') AS "Fornitura",
(SELECT ma03_value
FROM mobi_aes.ma03_work_metadata
WHERE ma03_work_id = ma01.ma01_work_id
AND ma03_name = 'RELCO') AS "Relco",
MA93.MA93_DESCRIPTION as "Stato"
FROM mobi_aes.ma05_work_status ma05, mobi_aes.ma01_work ma01, mobi_aes.MA93_STATUS_TYPE ma93, ma11_planning ma11
WHERE ma01.ma01_work_id = ma05.ma05_work_id
and ma11.ma11_WORK_ID = ma01.ma01_WORK_ID
and ma93.MA93_STATUS_ID = ma05.ma05_STATUS_ID
and ma05.MA05_STATUS_ID in ('AS','CO','NI')
AND UPPER (ma01.ma01_work_group_id) = DECODE(:P103_WORK_GROUP_ID,'-1',UPPER (ma01.ma01_work_group_id),:P103_WORK_GROUP_ID)
and trunc(ma11.ma11_start_date) >= DECODE(:P103_START_DATE,'-1',to_date('01/01/1970','dd/MM/yyyy'),to_date(:P103_START_DATE,'dd/MM/yyyy'))
and trunc(ma11.ma11_END_DATE) <= DECODE(:P103_END_DATE,'-1',to_date('31/12/9999','dd/MM/yyyy'),to_date(:P103_END_DATE,'dd/MM/yyyy'))
), mobi_aes.ma51_work_type ma51
where ma51.ma51_work_type_id = ma01_work_type_id
and ma51.ma51_work_type_id in (7,50)
I set a control break on the "Relco" column, so APEX generates correctly more "sub-report".
I need to export into csv file every single "sub-report".
Is it possible ?
Does another solution exist ?
Thanks for all
Francesco

Hello,
Getting the breaks in the csv export doesn't work unfortunately.
You would need to create your own procedure to get the correct csv.
There are many blog posts for that
e.g http://spendolini.blogspot.com/2006/04/custom-export-to-csv.html
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.sumneva.com/

Interactive Report download not matching displayed data

Hi
I have an interactive report with a simple where clause in:
select * from table etc
where a.entry_date > :P2_DATE
P2_DATE is a select list with redirect, with 2 options. Selecting the first option (the default) should return ~200 rows, the second should return ~800 rows. This functionality works correctly in the interactive report display, however the download to csv option only ever exports the ~200 rows - as if the IR download is fixed to the original query results. I'm using version 3.1.2.00.02.
Is this a known bug?
Thanks
-Marc

Hi
Have you tried changing it to a Select List with Submit?
Typically, this sort of behaviour means that the value selected from the list is not being stored in the session, so the report does not know that value - only the preivious value.
Also, how are you setting the default? I tend to do this using a page computation (conditional on the item being null)
Andy

Can i have a sample BSP INTERACTIVE Reports with step by step.

Hi Friends,
Can i have a sample BSP INTERACTIVE Reports with step by step.
Moosa

Hello,
Please find the sample Code below.
FIRST PAGE
Layout Code.
<htmlb:label for="emp" text="Employee id" width="10"/>
      <htmlb:inputField id="emp" value="<%= w_input1%>"/>
      <p>
<htmlb:label for="Employee Details"/>
       <htmlb:button   id = 'get'
                       text = 'Display'
                       on Click = 'OnInput Processing' />   <p>
<h1>Employee Details</h1>
<htmlb:tableView id="Employee"
                 table="<%= ZTABLE%>" <- Give the table name
                 selectionMode = "lineEdit"
                 design="ALTERNATING">
ONINITILIZATION EVENT.
data:
fs_yhtable like line of TABLE.
    select * from yhtable into table ZTABLE.
ONINPUT PROCESSING CODE:
* event handler for checking and processing user input and
* for defining navigation
class cl_htmlb_manager definition load.
case event_id.
when cl_htmlb_manager=>event_id.
data: event type ref to if_htmlb_data,
        fs_yhtable like line of t_yh1205,
        selrow type ref to cl_htmlb_tableview.
event = cl_htmlb_manager=>get_event_ex( request ).
selrow ?= cl_htmlb_manager=>get_data( request = request
                                        name    = 'tableView'
                                        id      = 'Employee' ).
data: tv_data type ref to cl_htmlb_event_tableview,
         t_tab type int4_table.
*        tv_data1 type ref to cl_htmlb_event_tableview.
tv_data = selrow->data.
   t_tab = selrow->selectedrowindextable.
if event is not initial
and event->event_name = 'tableView'.
    w_int = tv_data->rowselection.
    navigation->set_parameter( 'Employee' ).
    navigation->set_parameter( name = 'w_int'
                               value = w_int ).
    navigation->set_parameter( name = 'table'
                               value = table ).
    navigation->goto_page( 'second.htm' ).
endif.
endcase.
SECOND PAGE CODE:
LAYOUT CODE:-
<htmlb:content design="design2003">
<htmlb:page title = "Employee Details">
    <htmlb:form>
<h1>Employee Details</h1>
<htmlb:tableView id="Employee"
                 table="<%= t_yh1205%>"
                 selectionMode = "lineEdit"
                 design="ALTERNATING">
</htmlb:tableView>
    </htmlb:form>
</htmlb:page>
</htmlb:content>
Hope this is helpful.Let me know if you need any more help.
Thanks
kalyan

Interactive report column filters to display differently than column values

Greetings...
We use images a lot in our interactive reports to provide a visual representation to a status, or something locked for update, or what-have-you. By default, when a user clicks the column heading of a column which contains images, the drop-down list that shows up displays the actual images, which is nice for the user to identify exactly which thing they want to filter on. The problem is when the user selects on of the options in the filtering drop-down, the resulting condition that is displayed under the interactive report search bar is the HTML code of the image. I'd like something else to display there because showing the user the HTML code is atrocious.
I didn't think what I want is possible, but then I came across the Page Locks page within ApEx (page 4000:291 in ApEx 4.0.1) which displays a list of all the pages of an application and whether they are locked or not. It also allows you to bulk lock or bulk unlock a bunch of pages. That page uses an interactive report with a column called "Status" which contains images that represent whether the page is locked or not. When you click the "Status" column heading to filter, instead of seeing the images of an open and closed lock, you see the words "Page Locked" and "Page Unlocked." And even better... when you select on of them, the condition that is displayed to the user is very user-friendly.
Can someone tell me how this is done so I can replicate it in my own apps?
Shane.

Why not create the IR using the text you require e.g. 'Lock', 'Unlock' and then use JQuery to replace the text in the report with the image you want. All the filters should then show the plain text and the report will display the image. e.g.
http://apex.oracle.com/pls/apex/f?p=46801:1
Here's what I did:
Firstly make sure the IR has a region template.
Then create a Dynamic Action with the following attributes:
1. Advanced
2. Event: After Refresh
3. Selection Type: Region
4. Region: [select the IR Region]
5. Action: Execute JS Code
6. Fire on page load: [checked]
7. Code:
$('td [headers="TEST"]').each(function(index) {
if ($(this).text() == 'Lock') {
$(this).empty().html('<img src="/i/htmldb/icons/locked_small.gif" alt="Lock" />');
else {
$(this).empty().html('<img src="/i/htmldb/icons/unlocked_small.gif" alt="Unlock" />');
});Where TEST is the column name.
That's it, this may also be of interest:
http://simonhunt.blogspot.com/2011/10/adjusting-interactive-report-column.html
I hope it helps
Shunt

Interactive Report with Null Columns

I've got a user who wants to export an interactive report, and he needs certain columns to appear on the export for him to fill the data in later (this is an intermediate step, while we work on getting all the data he needs in to the database). I've created the report query, and there are a handful of null/empty columns (to preserve the correct order for the export). When I try to add this query to APEX in an interactive report, I get a "ORA-00001: unique constraint (APEX_040000.WWV_FLOW_WORKSHEET_COLUMNS_UK2) violated" error.
Googling around shows me that this happens because of similarly-named columns, and the solution is to provide aliases to all columns. My report has aliases on all columns, but I still cannot create an interactive report. I've tried changing the null columns to empty strings, as well as enclosing the aliases in double-quotes, but nothing works. I can however use my original query to create a standard report, but due to the export requirement, this isn't ideal.
I was able to create the interactive report with one null column, and then edited the report source to add in the others. This had to be done one at a time, since trying to add multiple null columns at the same time gives the same error again. Unfortunately, when I try and run the page, I get an "ORA-20001: get_dbms_sql_cursor error ORA-00918: column ambiguously defined" error.
My original query:
select customer.customer_name as customer,
       project.name as project_name,
       trunc(project.estimated_end_dt) as due_date,
       project_status.project_status_desc as status,
       null as revenue,
       project.baseline_effort as baseline_hours,
       null as projected_cost,
       null as est_gain_loss,
       project.actual_hours as actual_hours,
       project.estimated_hours as projected_hours,
       null as projected_cost,
       null as projected_gain_loss,
       null as roi
    from project,
         customer
where customer.customer_id = project.customer_id
and project.inactive_ind = 0
and project.customer_id is not null
and project.estimated_end_dt >= :DTP_P50_STARTDT
and project.estimated_end_dt <= :DTP_P50_ENDDT
order by customer.customer_name,
         project.estimated_end_dt;             Can someone tell me a way to create an interactive report with multiple null columns?

Hi shimmoril,
The problem is likely that you have two columns aliased as "projected_cost" (7th column and 11th column).
Hope this helps,
John
If you find this information useful, please mark the post "helpful" or "correct" so that others may benefit as well.*

Interactive reports with alv

Hi,
i just wanted to know how to create interactive reports with check box and whether we can use av with interactive reports.

hi,
this the code for interactiv ALV
*& Report ZINT_ALV
REPORT zint_alv.
TYPE-POOLS:slis.
TABLES:mara,
       makt,
       mseg.
DATA:BEGIN OF itab OCCURS 0,
      matnr LIKE mara-matnr,
      maktx LIKE makt-maktx,
     END OF itab.
DATA:BEGIN OF itab1 OCCURS 0,
      mblnr LIKE mseg-mblnr,
      menge LIKE mseg-menge,
      meins LIKE mseg-meins,
      werks LIKE mseg-werks,
     END OF itab1.
DATA:BEGIN OF itab2 OCCURS 0,
      mblnr LIKE mseg-mblnr,
      budat LIKE mkpf-budat,
     END OF itab2.
DATA:fcat TYPE slis_t_fieldcat_alv,
     fcat1 TYPE slis_t_fieldcat_alv,
     fcat2 TYPE slis_t_fieldcat_alv,
     eve TYPE slis_t_event,
     eve1 TYPE slis_t_event.
DATA:t_mat LIKE mara-matnr,
     t_doc LIKE mseg-mblnr,
     s_mat LIKE mara-matnr,
     g_repid LIKE sy-repid,
     subtot TYPE slis_t_sortinfo_alv,
     g_subtot LIKE LINE OF subtot.
SELECTION-SCREEN:BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:mat FOR mara-matnr OBLIGATORY.
SELECTION-SCREEN:END OF BLOCK blk1.
INITIALIZATION.
PERFORM build_fcat USING fcat.
PERFORM build_eve.
START-OF-SELECTION.
PERFORM get_data.
PERFORM dis_data.
*&      Form build_fcat
      text
     -->T_FCAT     text
FORM build_fcat USING t_fcat TYPE slis_t_fieldcat_alv.
DATA:wa_fcat TYPE slis_fieldcat_alv.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-ref_fieldname = 'MATNR'.
wa_fcat-ref_tabname = 'MARA'.
wa_fcat-seltext_m = 'Material'.
wa_fcat-input = ' '.
wa_fcat-edit = 'X'.
wa_fcat-input = 'X'.
wa_fcat-key = 'X'.
APPEND wa_fcat TO t_fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'ITAB'.
wa_fcat-fieldname = 'MAKTX'.
wa_fcat-seltext_m = 'Description'.
APPEND wa_fcat TO t_fcat.
CLEAR wa_fcat.
ENDFORM.                    "build_fcat
*&      Form build_eve
      text
FORM build_eve.
DATA:t_eve TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type           = 0
   IMPORTING
     et_events             = eve
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "build_eve
*&      Form get_data
      text
FORM get_data.
SELECT maramatnr maktmaktx INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara INNER JOIN makt
ON maramatnr = maktmatnr
WHERE mara~matnr IN mat.
ENDFORM.                    "get_data
*&      Form dis_data
      text
FORM dis_data.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid         "'ZINT_ALV'
     i_callback_user_command           = 'USER_COMMAND'
     i_grid_title                      = 'Interactive ALV'
     it_fieldcat                       = fcat
     it_events                         = eve
    TABLES
      t_outtab                          = itab
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "dis_data
*&      Form user_command
      text
     -->U_COM      text
FORM user_command USING u_com LIKE sy-ucomm sel_field TYPE slis_selfield.
CLEAR fcat1.
CASE u_com.
    WHEN '&IC1'.
      READ TABLE itab INDEX sel_field-tabindex.
      IF sel_field-fieldname = 'MATNR'.
        IF sy-subrc = 0.
          t_mat = itab-matnr.
          PERFORM build_cat1 USING fcat1.
          PERFORM build_eve1.
          PERFORM get_data1.
          PERFORM dis_data1.
        ENDIF.
      ENDIF.
     SET PARAMETER ID 'MAT' FIELD t_mat.
     CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_command
*&      Form build_fcat1
      text
     -->T_FCAT1    text
FORM build_cat1 USING t_fcat1 TYPE slis_t_fieldcat_alv.
DATA:wa_fcat1 TYPE slis_fieldcat_alv.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MBLNR'.
wa_fcat1-seltext_m = 'Material Doc.'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MENGE'.
wa_fcat1-seltext_m = 'Quantity'.
wa_fcat1-do_sum    = 'X'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'MEINS'.
wa_fcat1-seltext_m = 'UOM'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
wa_fcat1-tabname = 'ITAB1'.
wa_fcat1-fieldname = 'WERKS'.
wa_fcat1-seltext_m = 'Plant'.
APPEND wa_fcat1 TO t_fcat1.
CLEAR wa_fcat1.
g_subtot-spos = 1.
g_subtot-fieldname = 'MBLNR'.
g_subtot-tabname = 'ITAB1'.
g_subtot-up = 'X'.
g_subtot-group = 'X'.
g_subtot-subtot = 'X'.
g_subtot-expa = 'X'.
APPEND g_subtot TO subtot.
g_subtot-spos = 2.
g_subtot-fieldname = 'MENGE'.
g_subtot-tabname = 'ITAB1'.
g_subtot-up = 'X'.
g_subtot-group = 'X'.
g_subtot-subtot = 'X'.
g_subtot-expa = 'X'.
APPEND g_subtot TO subtot.
ENDFORM.                    "build_fcat1
*&      Form build_eve1
      text
FORM build_eve1.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = eve1
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    "build_eve1
*&      Form get_data1
      text
FORM get_data1.
SELECT mblnr menge meins werks FROM mseg
INTO CORRESPONDING FIELDS OF TABLE itab1
WHERE matnr = t_mat.
ENDFORM.                                                    "get_data1
*&      Form dis_data1
      text
FORM dis_data1.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid              "'ZINT_ALV'
     i_callback_user_command           = 'USER_COMMAND1'
     it_fieldcat                       = fcat1
     it_events                         = eve1
     i_save                            = 'A'
     it_sort                            = subtot
    TABLES
      t_outtab                          = itab1
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    "dis_data1
*&      Form user_command1
      text
     -->U_COM1     text
     -->SEL_FIELD text
FORM user_command1 USING u_com1 LIKE sy-ucomm sel_field TYPE slis_selfield.
CASE u_com1.
    WHEN '&IC1'.
      READ TABLE itab1 INDEX sel_field-tabindex.
      IF sy-subrc = 0.
        t_doc = itab1-mblnr.
        PERFORM build_cat2 USING fcat2.
        PERFORM get_data2.
        PERFORM dis_data2.
      ENDIF.
ENDCASE.
ENDFORM.                    "user_command
*&      Form build_cat2
      text
     -->P_FCAT1 text
FORM build_cat2 USING    t_fcat2 TYPE slis_t_fieldcat_alv.
DATA:wa_fcat2 TYPE slis_fieldcat_alv.
wa_fcat2-tabname = 'ITAB2'.
wa_fcat2-fieldname = 'MBLNR'.
wa_fcat2-seltext_m = 'Material Doc.'.
APPEND wa_fcat2 TO t_fcat2.
CLEAR wa_fcat2.
wa_fcat2-tabname = 'ITAB2'.
wa_fcat2-fieldname = 'BUDAT'.
wa_fcat2-seltext_m = 'Material Date'.
APPEND wa_fcat2 TO t_fcat2.
CLEAR wa_fcat2.
ENDFORM.                    " build_cat2
*&      Form get_data2
      text
--> p1        text
<-- p2        text
FORM get_data2 .
SELECT mblnr budat FROM mkpf
    INTO CORRESPONDING FIELDS OF TABLE itab2
    WHERE mblnr = t_doc.
ENDFORM.                                                    " get_data2
*&      Form dis_data2
      text
--> p1        text
<-- p2        text
FORM dis_data2 .
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = g_repid              "'ZINT_ALV'
     it_fieldcat                       = fcat2
     i_save                            = 'A'
    TABLES
      t_outtab                          = itab2
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                                                    " dis_data2
reward if useful...

Interactive Report with PL/SQL Function Source

Is it possible to create interactive report with PL/SQL function source returing a query? If not, has anyone done any work to simulate the interactive reporting feature for a normal report using API?

I haven't tried that before but you could:
1. create a collection from your result set returned by a dynamic query,
2. create a view on that collection,
3. use the view in your interactive report.
The usability of this proposal depends from a question how "dynamic" your query is - does it always have the same number of columns or not.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Please help to get onhand stock report with last purchase and billed date warehouse and item wise

please help to get onhand stock report with last purchase and billed date warehouse and item wise

Hi Rajeesh Ambadi...
Try This
SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',
T1.LASTPURDAT ,t1.LastPurPrc
FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
WHERE
T0.ONHAND>0
AND T0.WhsCode ='[%0]'
Hope Helpful
Regards
Kennedy

Report with a break above and labels

We want to create a Report with a break above and labels. There are examples for each of these, but I do not see an example of both in the same Report. Hopefully this is possible?? What can you tell us?
Thanks, Wayne

Thanks for the reply. I have the columns set up just as you have suggested. I even created a new report with form wizard and tried to update those two questionable columns.
If the columns are null, and I add values, they save. But then when I go back and update the record, but different columns, it nulls out the two I am talking about. I am wondering if a trigger is out there someplace that is causing them to get nulled out.
Regards,
Jeff

Interactive Report with union all in the query

I have an interactive report with the following query in the report region:
select property,saddr1,upostdate,sotherdate1,journal_control-1000000000,account,sdesc,uref,
suserdefined1,trans_notes,samount,detail_notes
from journal_entries
union all
select property,saddr1,upostdate,sotherdate1,journal_control-700000000,account,sdesc,uref,
suserdefined1,trans_notes,stotalamount,detail_notes
from charge_entries;
This gets translated as listed below during runtime. I am trying to pass a value to both SELECT statements instead of the just the bottom select statement. Is this possible using interactive reports.
select
PROPERTY,
SADDR1,
UPOSTDATE,
SOTHERDATE1,
ACCOUNT,
SDESC,
UREF,
SUSERDEFINED1,
TRANS_NOTES,
SAMOUNT,
DETAIL_NOTES,
"JOURNAL_CONTROL-1000000000" "JOURNAL_CONTROL-1000000000"
from (
select property,saddr1,upostdate,sotherdate1,journal_control-1000000000,account,sdesc,uref,
suserdefined1,trans_notes,samount,detail_notes
from journal_entries
union all
select property,saddr1,upostdate,sotherdate1,journal_control-700000000,account,sdesc,uref,
suserdefined1,trans_notes,stotalamount,detail_notes
from charge_entries
) r
where ("PROPERTY" = :APXWS_EXPR_1)
0.14: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="prop1"
Thanks for any help,
Jim

The bottom query is actually the third query, it encompasses the two that are unioned. It is generated by APEX to allow for the search facility - to achieve what you want ignore the larger query, and get your query working in something like SQL developer. Once it's working then put it into APEX, and the search wrapper will be generated.
select property,saddr1,upostdate,sotherdate1,journal_control-1000000000,account,sdesc,uref,
suserdefined1,trans_notes,samount,detail_notes
from journal_entries
where property = :YOUR_CRITERIA
union all
select property,saddr1,upostdate,sotherdate1,journal_control-700000000,account,sdesc,uref,
suserdefined1,trans_notes,stotalamount,detail_notes
from charge_entries
where property = :YOUR_CRITERIA;
Then you need to think about how you are using the report, if it is linked to from another report, then create a hidden variable and pass it from the parent.
If the report is standalone , then you could create an item , that can be edited and when submitted, re-executes the report based on the criteria entered.
Steve
Hot and bothered in sunny Dubai

Interactive Report with specific rows editable

I have an interactive reports, with the edit (pencil) link to a maintenance form. I only want the link to show for specific records in the reports. Can you put a condition in the link column to the pencil for certain records?
If so, how can you access the value of the field? ie. I need to check the value of 'USER_NAME' in the select below against :APP_USER
select A.pk_id as "PK_ID",
A.fk_sis_user as "FK_SIS_USER",
A.list_name as "LIST_NAME",
A.list_description as "LIST_DESCRIPTION",
B.user_name as "USER_NAME",
A.creation_date as "CREATION_DATE"

Not exactly what you are asking for, but it may give you an idea hot to create conditional
icon and link.
From always excellent examples from Denes Kubicek:
http://apex.oracle.com/pls/otn/f?p=31517:23:3086073313243153::NO
HTH
Thomas

Interactive report with pagination

Hi,
i have create an interactive report with pagination .i have follow instraction form
[http://dbswh.webhop.net/apex/f?p=BLOG:READCAT:0::::CATEGORY:10800346812869]
i have put JQuary in Page HTML HEADER .
Now it show me that code in header in my page .No value in my pagination select list.
How can i solve this problem.
Thanks

Hi friends,
i have sort out that problem,
i have jus put JQuary code in JavaScript Section.
Thanks

Interactive Report with html tags --- Data saved in Excel with html tags

Hello,
I am using APEX 4.0. I have an interactive report that displays some of the columns bold and / or colors using html tags. As an example,
SELECT
'''<font color="green"><b>'' || SERIAL_NUMBER || ''</b></font>'' SERIAL_NUMBER,'||chr(10)||
'PRODUCT_NAME,'||chr(10)||
'''<font color="teal"><b>'' || PRODUCT_DESC || ''</b></font>'' DESC,'||chr(10)||
'QUANTITY,'||chr(10)||
FROM
<Table name>
At runtime, the Interactive Report displays the fonts, colors correctly; however, when I save the data of the Interactive Report in an Excel format, it saves the Html tags along in the EXCEL spreadsheet. For example, the column serial number from the above SELECT statement is extracted in an Excel column as ---
<font color="green"><b>123456789</b></font>
Is there another way to render the column data so that extracted data will not display the HTML tags or is removing the html font color tags from the SELECT statement the only option?
Thanks in advance.
Ed

Hello,
I have a feeling all your problems are related take a look at this thread. I found it in 10 seconds of searching the forum.
strange tags
It's always best to do a quick search first most likely you are not the first person to have this problem.
Carl

Interactive Report with Date Filter

Hi out there,
I created an interactive report which contains a date column. The default filter-options just work fine. But my users need to filter with the data which is contained in the report e.g. if a row contains 21.06.2000 they want to see this value in the filter-list of this date column and not the predefined defaults (last five years, last day and so on).
I already tried to specify the date as a string and did a select ... to_char ( date_column, 'dd.mm.yyyy' ) which broke the sorting but gave me the filter-options my users wanted. Specifing the date as yyyy.mm.dd is not an option for my users.
Is it possible to get a filter which shows the "real" data and keeps the right sort order ?
Regards and thanks
Markus

Markus,
I've come up against this too. A varchar column gives you the selection list but no filtering using <,>,between etc., but a date column doesn't show the discrete data values. Users tend to ask for both, and putting both date and varchar columns in the report or using an LOV isn't very elegant.
Is there anything significant about the dates the users want to search directly on? Judging from your 21.06.2000 example I'd guess not, but if so you can build your own column in the SELECT statement and use that for filtering/creating default reports.
regards,
Malcolm.
Edited by: MalcA on Feb 16, 2012 11:39 AM

Interactive report with control break displays no data, until control break is unchecked

Similar Messages

Maybe you are looking for