Intercompany Stock Transfer with WM

Hi,
We are doing stock transfer between companies.
The steps we are following are
1) Purchase order created with order type NB.
2) Outbound delivery create which moved our stock to intrerim Storage type 916
3) Inbound delivery is created to receive material in destination Plant
4) While put-away the material , system trying to Pick material from interim storage type 902.
But I was expecting that either at the time OBD system will place stock to 902 interim Storage type OR at the time of inbound -putaway system will pick the material from 916 (instead of 902). But actually it is not happening.
Therefore my question to how to get move stock from Storage type 916 to 902 OR how to adjust inventory between 916 and 902.
Presently at my end , at the time of Put-away material into destination plant system is trying to pick inventory from 902 where no inventory is available and therefore prompting an error "negative stock not allowed"
regards
Shrey
Since no inventory is available is there in Storage type 902

Hi Anantharam,
The 'Allow negative stock' for the interim storage type 902, is active and still I get the same error.
For the same scenario, system is able to create a quant for ST 902 and another quant for the destination storage provided I choose a storage location which is not HU managed.
And the same scenario works for delivery type NL (intra company) & vendor purchase.
The problem what I face is only with delivery type NLCC.
As a work around, I am taking stock in to a non HU managed S.Loc and then thru transaction VLMOVE , I move this to a HU managed S.Loc. But this is not the right solution
Please can you giude me were could the error be, and after outbound delivery from the sending plant are we first to take the product into a non HU managed S.Loc and then transfer to a HU managed S.Loc
Appreciate your help
Regards
Prakash Govindarajan

Similar Messages

Intercompany Stock transfer with Consignment

Experts -
I ran into one scenario for intercompany stock transport order with Consignment
Company A: USA 3000, Plant 3000
Company B: Germany 1000, Plant 1000
Germany 1000 orders parts from USA (3000)
Condition here is "Ownership remains to 3000, unless 1000 move parts to their own stock"
Is this possible with intercompany STO?
I can do processing without Consignment, but with consignment it is giving following error:
"No delivery type defined for supplying plant 3000 and document type NB - Message no. 06694" -
We are running ECC 6.0
Thanks-

Hi,
For PO document type + Supplying Plant combination, you will have to assign the InterCompany delivery type NLCC
SPRO>Materials Management>Purchasing>Purchase Order>Set up Stock Transport Order-->Assign Delivery Type and Checking Rule
But, for companies across countries, like US and Germany, regular SD's consignment sales process may be ideal. I have recently designed one complete scenario for this and working fine...
Consignment Fill-up, Consignment Issue, Consignment Pickup and Consignment Returns process ....This perfectly works with standard SAP solution and very rarely you would require any modifications in this area.
Reward if helpful
Regards

Intercompany stock transfer with no accounting document

Hi,
During the Inter-company stock transfer,client needs only stock movements from supplying company code to receiving company code,but they does not want any accounting document during this transaction.
I have assigned Proforma invoice to delivery document type.Is there any other provision.
Kindly advise.
Pradeep

Suppose if billing is made with TYPE IV,then we could get completed message.
What is the setting makes this happen.
The reason is in copy control of VTFL between IV and NLCC at item cat NLC you maintain the Pos/ neg quantity field will have + which updates the status of the delivery once the target qty gets billed hence system shows status as completed.
For the same above scenario if you put blank system shows as being processed.
And coming into your scenarios you are maintaining the copy control between Delivery and Proforma invoice i think you have the same pos/neg quantity having "blank" which means it does not have any effect . This is the one of the reason you can create any number of proforma invoices.
So if you want to update the status as completed please put + in the field pos/neg quantity.
This should definitely work for you, i have tested in my system.
thanks,
Srinu.

Intercompany Stock transfer with delivery and intercompany billing.

hi,
I'm trying to use the standard cross company stock transport order process, however, when i create the initail purchase order in the ordering company, the shipping tab does not appear, preventing me from creating a delivery. The customers and vendors have been assigned correctly. Can anybody help ???

hi
if u want to do STO with inter company billing, the following settings to be done
System settings: 1. Create internal customer( at the supplying co code,sales org) and assign to receiving plant.
2. maintain the supplying plant receiving plant and delivery type NLCC.
3. Maintain the doc. type NB, supl. plant and recv. plant.
This you will do in customizing. SETTINGS for STO.
Hint: when u create a custmer master maintain the shipping instruction.
Master settings: In vendor master maintain plant in purchasing tab.
this means this vendor is considered as your supplying plant.
IN PURCHASE TAB GO TO EXTRAS ( main menu) SELECT ADD ADDITIONAL PURCHASING DATA.(maintain the plant here)
then
ME21N
doc type : NB( std)
rest of the things as usual
Check it and revert back.
Regards
Viru

Intercompany Stock transfer pricing issue

Hi Experts
scenario is intercompany stock transfer with invoice
In Intercompany stock transfer scenario in pricing procedure the condition type PI01 is statistical
if i put only PI01 then system calculate right net value (quantity multiply by rate)
but if i put ZPR0 and Discount Zk04 then System calculate net value only w.r.t. PI01 condition and not consider the ZPR0 and ZK04 in calculation for net value
whats the problem
please suggest
thanks in advance

Hi,
Please set the pricing type C in the copy control. Also set the price source A that is purchase order in the copy control at item level.
Hope this will help.
Thanks and regards,
Atul

Intercompany Stock transfer order with excise

Hi,
Can anyone tell me about Intercompany Stock transfer order with excise step by step.
hoping to replu

Hello,
Create Stock Transport Order - ME21N
Create Delivery Challan (DC) - VL10B (this reduces the inventory from supplying plant)
Create Excise Invoice refering the DC created above - J1IS - Ref document type OTHR (Excise values are transfered in this step)
Do goods receipt against the DC (outbound delivery) - MIGO in receiving plant. Also capture and post the excise invoice cerated in J1IS.
Regards
Mahesh Naik

Intercompany stock transfer: IV billing documents creates FI document with

Hi,
Intercompany stock transfer: IV billing documents creates FI document with wrong vendor.
How can I make sure that the correct vendor is posted in the selling company code?
Best regards,
Eric.

Hi Jürgen,
I also tried this option but then the following error appeared:
"Message no. F5598: Posting keys for account determination for transaction BUV do not exist".
Some point is forcing the PGI to ask for BUV operation (Tx. OBYA).
Thank you for your contribution.

Intercompany Stock Transfer

Hi guys
I have created all the infomation relating to inter company Stock Transffer but i couldnt get able to invoice two times i.e one to customer and another to suppling plant
please give me the information relating to it

Hi,
Pls. check and correct if any of thefollowing steps have been missed out for intercompany stock transfer -
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
Hope it helps.
Regards

Intercompany Stock Transfer - MIRO Accounting Error

Hi Experts,
In Intercompany TSock Transfer with Delivery and Billing, I am facing Problem in MIRO - Invoice Posting Accounting Entry.
Consider the following scenario:
Plant 0002 orders 10 kg of a material from plant 0001. The following prices apply:
Valuation price (MAP) of material in (plant 0001): Rs. 10/kg
Price for intercompany billing (plant 0001) in VF01: 12/kg
Order price (plant 0002 in PO ): Rs. 11/kg
The following postings are made for the individual transactions:
Goods issue in Plant 0001          100 -        Stock account
(643 mvmt)                                  100 +        Change involving stocks
Billing in Plant 0001                     120 -       Sales revenue account
in VF01                                       120 +      Customer account
Goods receipt in Plant 0002       110 -    GR/IR clearing
                                                   110 +   Stock account
when I am posting Invoice in MIRO Tcode, Accounting Entry generated as below which is WRONG.
Invoice Posting in Plant 0002     110 -    Vendor account
in MIRO                                       110 +    GR/IR clearing
Actually, the accounting Entry should be as per below.
Invoice Posting in Plant 0002     120 -    Vendor account
in MIRO                                       110 +    GR/IR clearing
                                                    10 +   Price difference account or stock account
Can any one tell what configuration is missing, where Billing Doc (VF01) value needs too be adjusted while Posting Invoice as above.
Thanks and Regards,
Selvakumar. M

Hi,
I do it 4 year ago (in a 46B release). I don't remember these details (differences), but I remeber that you only need one document (the IDOC makes the FI document in the company that receipts the goods). Check these notes that I forgot tell you before, because note 31126 tells us:
"You can also use this EDI processing for the logistics invoice verification of the stock transport order in Materials Management (module MM). Only some of the parameters must be adjusted in Customizing for the output control. These adjustments are described in the following solution."
I remember that I avoided this problem because in pricing procedures I forced that conditions were equal. You can use VOFM to achieve it.
Note 659590 - EDI: Stock transfer and cross-company sales
Note 31126 - Intercompany billing - posting to vendor account using EDI
Note 127178 - Questions about user exits in IDoc INVOIC01 (FI)
Regards,
Eduardo

Intercompany Stock Transfer - ship complete

I have a need to force one delivery document to create per stock transfer PO. All items are going from/to the same plants.
In comparing the functionality I am looking for to the SD side of the equation, I see three options to accomplish this.
1. In SD, I can mark a sales order "Ship Complete" and that makes all lines delivery onto one Outbound Delivery.
2. In VL02N, I can add items to an existing outbound delivery by clicking on the menu Outbound Delivery --> Deliver Sales order.
3. Grouped Deliveries at the line level allows me to coordinate certain lines to create on one Outbound Delivery.
On the MM side with an intercompany stock transfer, I don't see either of these options available, so I'm wondering how I accomplish forcing all lines to create 1 OBD. Or as a 2nd option, add lines to an existing OBD from a stock transfer. Or as a 3rd option, the ability the group multiple lines together and force them onto 1 OBD.
Any help in this area is greatly appreciated.
Gina Feldner

where is this ship complete field?
I think you refer to field 'Partial delivery/item' is set to 'C' ('Only complete delivery allowed'), which is at item level in the sales order.
So it just means that this one item has to be completely delivered, it does not mean that all items of a sales order have to be together in one delivery.
In general there exists so-called split criterias and they are common for deliveries based on sales order and deliveries based on purchase orders.
in a STO you have as well indicator for partial delivery. OSS Note 1093582 - FAQ: Delivery complete indicator ELIKZ
explains how it is used (question 6)

Intercompany Stock Transfer in Retail

Dear Experts,
I have the following issue:
we need to customize intercompany stock trasfer in Retail system (ECC 6).
I not how to do it in normal SAP.
Is it different in Retail?
I cannot assign Sales Org/Distr Channel/Division and Customer to the plants in "Set Up Stock Transport Order".
There is no plants created for Retail (with T001W-VLFKZ field not empty).
Does it mean that intercompany stock transfer is configured differently in Retail (different customizig transactions)?
If yes where can I find detailed description of configuration steps for intersompant stock transfer in Retail?
Thanks in advance.

Dear Sotiris,
so is scenario in retail is the same as in normal SAP but only customizing done with different transactions?
For example in normal SAP I would start procedd with creating Purchase order from ordering plant, indicating vendor which has suppliyng plant (LFA1-WERKS) corresponding to delivering plant. By this field system would understand that this is intercompany stock trasfer order.
In retail I cannot assign field LFA1-WERKS since it gives me error: "0101 is not an industry plant; assignment not possible. You wanted to assign plant 0101 to the vendor. You cannot make this assignment as 0101 is not an industry plant. You can link a retail plant to a vendor via the plant master.".
WHERE I CAN LINK VENDOR TO PLANT? I cannot do it in WB02 and also in WB08!
Please help!

InterCompany Stock Transfer - shipping Point

Hello
How sales area and shipping point are determined in delivery document for intercompany stock transfer process.
regards
Prashant

Hi Prashant,
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Tcode : OMGN
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
Thanks & Regards,
Pankaj Mahajan

Intercompany Stock Transfer - without clearing accounts

Dear all,
I have configured in one client machine the Intercompany stock transfer process, following the indications of the different messages posted in the forum (vendor allocated to supplying plant, customer associated to receiving plant, NB purchase order, define shipping data for plants, assign delivery type and checking rule (NLC), deliveries items, schedule lines, etc).
The process works correctly (purchase order, outbound delivery in supplying plant, inbound delivery in receiving plant, and interCo billing). In the outbound delivery posting, BSX and GBB operations are used.
After that in other client machine I have configured the same process, with the same master data and so on. But in the outbound delivery posting, BUV operation is called and it is compulsory to fill in clearing accounts in Tx. OBYA. This leads to two account document creation.
I have check:
- Movement configuration --> the same in both client machines
How can I deactivate the last behaviour. I don't want to use this automatic clearing. I would like to achieve the outbound delivery posting like in the first case (BSX and GBB).
Any ideas?
Thank you very much in advance.
Alberto.

Hi Jürgen,
I also tried this option but then the following error appeared:
"Message no. F5598: Posting keys for account determination for transaction BUV do not exist".
Some point is forcing the PGI to ask for BUV operation (Tx. OBYA).
Thank you for your contribution.

Intercompany stock transfer without billing

Hi experts,
I have one issue. We want to map intercompany stock transfer for spares and consumables without billing.
Is it possible in SAP? If possible can anybody tell the business process step by step with transaction?
points will be awarded
Regards,
Santosh

Hi,
normally, the intercompany stock transfer process is not billing relevant, but the
cross company stock transfer is billing relevant;
step-by-step process for intercompany stock transfer:
======================================
the question is if you want to do the process with or without a delivery, in one step or two steps...
one of the processes is following (with delivery - two step):
1) me21n -> create purchase order (UB)
2) vl10b -> create outbound delivery (NL) and post goods issue within vl02n (movement type 641
-->> after this step, the material will be in stock in transit
3) migo -> A01 post goods receipt - R05 with reference to outbound delivery
(you can also do it with reference to the purchase order, but you could have changed something within the delivery -> check note 326539)
-->> if you would need an inbound delivery for your process, this is also possible, and you can also create it automatically)
(you can check notes 421276, 490865, 497287, 965176 regarding this)
if you want to do it with delivery with one step
you just have to do point 1) and 2) -> here with movement type 647, that also makes the post goods receipt and you do not have to do point 3)
if you want to do a stock transfer process without delivery,
you should post goods issue and receipt with migo with reference to the purchase order
you could also check notes 498143, 842829 for more information, f.e. about customizing settings
hope I could help you,
regards,
Ely

Intercompany Stock transfer for Returns

Hi,
Can any one help me in giving solutions for Intercompany stock transfer for Returns. I need the Steps involved the above process.
Regards,
Kannan

Hi Laura,
If you are processing with delivery, you shd check the delivery indicator in MBRL Transaction.
In your scenario if Plant A has shipped to plant B and Plant B return to plant A on a return PO. Plant A raises the crdeit memo on plant B.
Typically returns are done with as you create a return purchase order with Return indicator create an outbound delivery and do 161 movement and subsequent PGR on the outbound delivery.
Thanks
Sudhakar

Intercompany Stock Transfer with WM

Similar Messages

Maybe you are looking for