Interested in MAC

I currently do not OWN a mac, but im interested in getting an Imac. Problem is, Im not knowledged on a mac, so I would like to ask a few questions about the Imac.
1. What are some common problems with Imacs.
2. What makes a MAC better then a pc other then security.
3. Approx how much would RAM cost for an Imac in canadian currency, and what should I look for.
Thanks.
-Cody

1. "problems"...not much. Apple is really good at updating their products...and you don't see too much "security updates" as in Win XP. As mentioned before, you get a "computer" right out of the box. Just have to hook up the mouse and keyboard and you're ready to go. The the screen looks amazing! Go check one out at a Mac dealer near you.
2. You've probably heard of this before...if you ask a PC guy, they'll argue that PC has more benifits than Macs. If you are a Mac guy, they'll tell you that a Mac is superior. It really depends on how you're using it. If you mainly work on word processing programs/surf the Internet/play GAMES. You're probably better off sticking with a PC (my own opinion anyway). Though a Mac can do the same if not better...you're not going to get as many game support as a PC. But then again, that's what a XBOX 360 is for...right?
If you like to play around with photos, videos, music, etc,. (digital contents), a Mac is probably for you. Just plug-and-play with most camera/camorder/iPod. iLife is really useful...for me anyway.
3. No need to compare this with a PC, they both use the same type of memory. Just need to shop around that's all.
Yes, a Mac does cost a little more (on the surface), but once you factor all the useful programs that a Mac comes with, you'll be happy with your investment! Now that they're using Intel's chips...and Apple usually gets the first crack at their "high-end" chip "first".
Anyway, just my opinion..."it's like comparing an apple with an orange...." PC..."personal configurations". MAC..."Most Awesome Computers". J/K

Similar Messages

  • Hi good morning, I'm from malaysia, can I use apple education package my wife is a teacher, I'm interested for mac 13 inch water for her I be able to buy used apple education package how and what documents are needed

    hi good morning,
    I'm from malaysia,
    can I use apple education package
    my wife is a teacher,
    I'm interested for mac 13 inch water for her
    I be able to buy used apple education package
    how and what documents are needed

    You will need to contact th Apple Store. This is a user to user forum.
    http://www.apple.com/contact/
    http://store.apple.com/us-hed

  • Interest in mac

    Hey Guys,
    im a PC user and interesting move to mac.
    i use cad stuff like PowerShape and PowerMill from Delcam. Can I use that stuffs in mac.
    need your help guys
    thank u

    Yes you can; using Boot Camp. I use IronCAD on a macbook pro using Boot Camp.

  • How do I share windows and iOS on my MAC book pro

    how do i share windows and iOS on the same hard disk on my MAC? will each of the operating system see the whole disk?

    Either you don't understand or misuse just what iOS is, it is only found on iPad, iPhone, iPod and does not run on Macs in any way, and as far as we here the only operating system of interest is Mac OS X Lion 10.7.5 or above.
    There are forums for iPad and if you have a notebook then you want MacBook Pro forum.
    As for Windows, there is a forum for "Boot Camp" to set aside and use part of your hard drive for Windows to run natively.
      MacBook Series Forums
    https://discussions.apple.com/community/notebooks?view=discussions
      http://www.apple.com/support/ipad
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Learn more about how Mac computers can run Windows 8 using Boot Camp 5.
    http://support.apple.com/kb/HT5628
    Products Affected
    Boot Camp, Windows 8
    General installation questions
    What is Boot Camp 5?
    Boot Camp 5 is not a release of OS X software. Rather, it is a release of the Windows Support Software (drivers). You will need to use this software on your Mac with Windows 8 or Windows 7. For more information on Boot Camp 5, see this article. 
    http://support.apple.com/kb/HT5639
    Which Macs support Windows 8?
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Mid 2010 or newer)
    Mac Pro (Early 2009 or newer)
    Mac Mini (Mid 2011 or newer)
    iMac (27-inch, Mid 2010 or Mid 2011 or newer)
    For more information, see this article.
    What are the System Requirements for Windows 8?
    Please see this article.
    How can I install Windows 8 on an eligible computer?
    Use the Boot Camp Assistant. The assistant will partition your internal hard drives and install Windows 8. For more information on Windows 8 installation, see the Boot Camp Installation & Setup Guide.

  • Help! Can't install SSD in my new Mac Mini Server (2012)

    Previously I've purcahsed Mac Mini servers and removed one of the two drives, replacing it with an OWC SSD. The hardware change was not hard to do and resulted in incredibly good computers for my employees to use which allowed us to retire several old, slow and abandoned-by-Apple Mac Pros. There were no issues with reformatting the computers after they had SSDs put in.
    Today I took delivery of a new Mac Mini server, and started to do the same thing, removing the top HDD and sliding in my SSD, since I have many of them around. Unfortunately, the OS would NOT let me format the disks separately or remove the RAID. The volumes (the original 1 TB that was inside and my 480GB SSD) were both colored red when I booted into Internet Restore mode and ran Disk Util, something I've never seen before, and all it would do was say "there was a problem with your disk, would you like to revert it to a working state?" which in this case means Disk Util forcing my drives back into a RAID whether I want them that way or not. (At one point it fused my SSD and the 1TB drive into a single logical drive that had the correct size but didn't show separate sections, and couldn't be de-RAIDED at all, even when I connected to another computer with the Mac Mini in Firewire target mode.)
    I gave up and put a 240 SSD in the lower bay, resulting in a 760GB RAID of two mismatched SSD sizes, which isn't what I wanted but I guess it will do. So far it seems to be working.
    My question is, why in the heck is Apple forcing me to run my computers as a RAID and/or not letting me break the system into one hard drive and one RAID, which is what I want? (Having the backup disk right inside the computer is very handy.)  Is this some feature to keep us from "making our own" Fusion drives? If Apple is deciding we can't hack or do anything interesting with Mac Minis, this will the last one I purchase, and I'm sure there will be others who do the same.
    Since replacing one HDD with an SDD is likely to be the most popular mode imaginable for Mac Minis, can anyone tell me if they got a similar setup to work, and if so what did you do? Can you post the steps here for others who will be in this situation?

    I'm not sure how or what is different between the Standard 2012 Mac Mini and the 2012 Server...? However it looks like your Server also uses Fusion like or similar to the regular Mac Mini's.
    "The version of Disk Utility that comes with Fusion Drive is unique. Earlier versions of Disk Utility can't be used with a Fusion Drive."
    Have a look at > Mac mini (Late 2012) and iMac (Late 2012): About Fusion Drive
    and > Special Note for Adding an SSD to a 2012 Mac mini. | Other World Computing Blog

  • Local Web Development Using Spare Mac to View

    Hi
    Hum, hope I can be clear.... my mission: use old laptop (Tiger) to view web sites in the User/Sites folder on my new laptop (Snow Leopard) via web sharing. Why? Well, it's another screen, it's there and importantly, it represents the majority of visitors to sites. Roughly 50% of visitors are using screens of 1024 - 1280 width. My new hi-res mac represents about 5% of visitors. This seems pretty consistent across all the sites.
    Anyhow, I have the hosts and httpd.conf files set up to serve multiple sites using NameVirtualHost *:80 and the <virtualhost> directive. (On my new laptop). So.. I can type into the address bar in Safari et al (new laptop) "http://mySiteWhatever/".
    What I've achieved is: (old laptop) typing in Safari et al "http://newMacID.local/" or "http://newMacIPAddress/" displays the first site in the virtualhosts list.
    What I've no idea how get to view the other sites in the list.
    Some pointers would be really helpful and appreciated - I'm more than happy to put in the time figuring out for myself. As things stand, I've no idea what direction to go in even.
    Thank you for reading.
    Message was edited by: BluePlumUk

    Hi everyone.
    Firstly a big thank you all for pitching in with kind suggestions, really appreciated... though BobHarris you naughty salesman. Did it with charm though so forgiven this once
    Anyway... apologies for taking a while to add anything, I have been reading them as they've come through. I've hung back because I'm battling with my own ignorance on this topic and want to be able to add sensible statements here... and try things out.
    Roger... all the sites are dynamic (use a database, php for example) so I'm afraid the 'simple' approach of inputting file://... into the browser doesn't work. I need to 'parse' the sites as though they are on a web server. Thank you all the same, for html only sites it's the way to go.
    Thomas... I had try of MAMP and while I know lot's of people use it, I came to the conclusion myself personally that I should persevere with setting up the Tiger laptop Apache to operate as it should, and I'm glad I did, Proved useful experience to have under my belt. Just my own personal viewpoint. Of course with Snow Leopard Apache's all sorted out-of-the-box which is really cool. Thank you for taking the time to offer a suggestion, not a wrong one.
    Hans... thank you for your pointers. Brilliant. Sorted me out. Bloomin marvelous. It was the second paragraph connected with a half formed instinct I had that the second (old) mac was needing extra info somehow somewhere.
    So... for everyone who's shown interest ->
    New mac serving web sites from the built in Apache as proper web sites, dynamic, database driven, whatever. Type in to browser "http://sitenamewhatever.ifyoulike" and you'd think it was 'out there' on the web. (Anyone wanting to sort the same situ should look at the Apache link Hans provided, all a bit technical, but worth persevering with. I use Smultron text editor for editing hidden files rather than terminal).
    Old/second mac needed the ip address for the new mac writing into it's Apache host.conf file. The ip address needs to be the network ip not the standard mac ip. Now, I can type in "http://sitenamewhatever.ifyoulike" in a browser on the old (second) mac and voila! Awesomely useful.
    What I don't know is what (router, mac itself) is identifying the network ip and therefore when/if it might change... I do know it's not dynamic in so far as it booted up today with the same ip.
    Bit of a long post, but hopefully a helpful one.
    Thank you all again.
    Regards and respect to you, everyone.
    Edit: Just a note - When I said "as proper web sites" I mean the websites are all behind the firewall, 'local' only. Viewable by me and my macs only – a 'private internet'. Of course there are copies out on the internet, on web servers - 'remote' copies viewable by everyone.
    Message was edited by: BluePlumUk

  • Mac finance software - quickest & easiest?

    Hi - I am interested in Mac finance software that:
    -can categorize or tag transactions on its own.
    -do direct connect to my bank on a schedule in the background
    (OK but less desirable option would be to have an internal browser for ofx or qif download)
    -do much from the keyboard with minimal keypress sequences - ie for manual categorization or tagging.
    -sync to an iphone app (possibly over the air).
    I've done some research but can't find what I want.
    Does this exist?
    Thanks

    Joe,
    There are (unfortunately) only a few reasonably good banking/finance programs for Macs. The operative words are 'reasonably good'. None is truly outstanding, and each has significant pros & cons:
    Moneydance
    Quicken Essentials for Mac (imho a real disappointment from Intuit)
    iBank
    There are a whole bunch of lesser apps, none of which I would trust with my finances.
    Have you considered installing Windows and running Quicken Deluxe, Premier or Home & Business in Windows?

  • INstallation of Mono project on MAC OS X v10.4 Tiger

    HI Team,
    I'm new into the world of MAC OS. But have interest for MAC other than windows. We have a requirement to run C#.net 2.0 application in MAC OS X 10.4 Tiger. For this we have adopted Mono project. After browsing thru the website www.mono-project.com/downloads we found the mono installable package of extension ".dmg". Do we need to download this and install the same.
    What generally will be the installation procedure of s/w on Mac and how these can be uninstalled?
    Thanks in advance.
    Regards,
    B. Ravi Kiran.

    Welcome to Apple discussions.
    On Mac OS X, installation are quiet simple, the .dmg file you can download on that website is the standard disk image on Mac OS X, you open it and it mount a virtual disk on the desktop. Sometimes you will have to agree to a license before the disk actually mounts (it's not the case here).
    In the virtual disk you may have one of those two possibilities :
    - You can have a .app file or a folder containing the app, in that case (and it's generally written in the window) you just have to drag the folder/app on your hard disk to install it.
    - Or you can have a .pkg/.mpkg file, it's an installer package, you just double-click on it to launch the Installer app, you follow the instructions agreeing the licenses, entering your password to install the app and then the install will begin. For the mono project you have that solution. here it will just install the framework Mono.framework into the folder /Library/Frameworks.
    After installing you'll should be able to use any Mono compatible applications, well hopefully, but I can't guaranty you anything. I would rather saying that trying to make a C#.NET app to work on a Macintosh is counter-nature if you don't use an actual Windows (using BootCamp or virtualization apps like Parallel or VMWare), especially because Mono didn't port the whole .Net framework (I think it misses WinForms for instance).
    However, if you actually need to make that app work on Mac OS X \sight than it'll be the only solution.

  • WHY MAC???

    I have been a PC guy but am now looking at a new laptop and a friend had suggested a Mac. Every Apple person I know always raved about the product. So I have narrowed it down to two machines. The Dell XPS M1210 or the MacBook. I use my computer for work (office, acrobat, & internet) plus movies, photo's, and travel a lot with it. I don't play games.
    After spending the better part of a day reading the posts on here I am wondering why buy a Mac. It seems that common problems for the MacBook are;
    - random shutdowns/reboots,
    - numerous battery issues,
    - CD's/DVD's not playing and/or being scratched by the drive,
    - CD's/DVD's getting stuck in the drive,
    - The proclaimed ability to run windows does not seem to be as flawless as portrayed
    - Several websites not being able to be opened,
    - But the one that got me is the numerous complaints about Apple service, with common replies of "impact damage" or "software problems not coverd by AppleCare" and requiring moeny to fix.
    From what I have read it does not live up to the reputation of Apple being a superior integrated product with fantastic support. In other words not much different from PC.
    So I ask everyone out there, because I was quite keen to switch to Mac, why buy a Mac?? How is better than a PC??
    Thanks,

    Well I guess I understand your point.... But think about this when you go to a hospital all you see is people who are sick or having problems with a health concern in their life. When you come to the discussion all you will have is people with problems trying to get them solved. Nobody comes in here to chat about how great their laptop is, they come here to share common problems. I have been a Windows user all my life. I never had any interest for macs until recently we put my HP Pavilion to the test versus a Ibook Pro. We did 3 hours of audio recording. I was so asahmed of my HP because it froze 6 times in 3 hours and when we put the ibook it did everything perfect. The next day I sold it and just a week ago I got my mac, infact im on it right now. This machine is absolutely amazing. The widescreen feature is mind boggling! Its a bright little screen that blows your mind. I got the mac with the 2.0 ghz Intel Core Duo processor and with the basic 512 mb ram. THIS THING IS QUICK!! It came with the DVD burner superdrive and its great. The OS X is real simple and very effective for what ever you neeed it. I thought I would take longer than a week to learn this system, but I already got it down. Other things like the bluetooth, allows you to transfer info between computers or cell phones without any wires. Battery timE! WOOO HOOO! Easy 5 hours on doing basic stuff and about 3 hours and 30 minutes playing a dvd or doing many things at once. I can have 15 pages of Safari(Internet Browser) open and the laptop will still be as fast as when they were closed. Ever heard of no virus, no spyware, no pop-ups? LOL i did not believe it either but now I get to surf the internet pop-up free with no risk of viruses or spyware attaching to my computer. You like to travel right. This computer has a very sleek design and is very light 5.? pounds. Pictures? The macbook has a built in camera called Isight it takes incredible pictures and also it is great for video chatting or video conferencing it comes with software for picture editing(cant think of te name) I thik its Iphoto. Ill tell you one thing about changing to a new system(you will expereince this). When you change to a new system for example from windows to mac. When something you dont have the knowledge of goes wrong, people have the tendency of blaming the machine immediatley without any doubts. This happened to me. This is my first mac ever and when the internet was not working properly, I immediatley blamed the mac for it, without realizing that my router was the one messing up. I bought office 2004 for mac and it is completely different to the windows software it is more stylish and better designed. Of course if you have problems adapting to mac, Mac offers a software called parallels for mac. This program allows you to run and install windows on your mac and run it parralel to OSX. Of course when you use windows you get all them dirty things on the internet that mess up your computer. This has been the best investment in my whole life. I am going to stick to mac until I die. LOL. Take it into consideration that im a college student studying to become a physical therapist. So I have to have a machine that I can rely on and that it will not fail me. Regrets? NO WAY! There is no such thing as perfect techonolgy in this world. But I can tell you that the Macbook comes real close to it.Anything you purchase in this world can come defective there is no guarantee on anything. But to me its the MAC OSX that makes this machine stand out. The security, the simplicty. The mac is very user friendly. I give it two thumbs up and recommend it to all!
    I hope this Helps GLI77
    If there is anything else I can help you with. Please let me know!
    Gudberto J Nava

  • Mac OS X Leper Server

    I am at the point of calling it Mac OS X 10.5 Leper. I am on my fifth time trying to install the server on a test PowerMac Dual-1.25GHz G4 with 2GB of RAM and tons of free disk space.
    When the server gets to the last part of "Your server is being configured." it hangs. It hangs for about 30 minutes and then crashes.
    I have erased the disk and zeroed the hard drive just in case. I've booted into another hard drive after the DVD installs to repair the directories and permissions. And I made a .dmg of the hard drive just after the DVD installation to reimage the darn thing instead of going through another installation for the sixth time.
    I've had problems getting DNS running. I've had problems getting iCal working (and not related to DNS), and I cannot get Open Directory to work properly.
    I have a 10.4.11 server that I've beaten on in the past. It's rock solid compared to Leper. However, I cannot upgrade from the 10.4.11 server to Leper because that also ends up in a disaster because all of the Web pages display improperly and you can't get web-enabled calendars to work properly.
    The short of it is this: I have several clients in the greater NYC area that have been asking me my opinion of 10.5 server. By no means will I recommend or install this beast on any production machine until at least 10.5.4 or better. This operating system is terrible in its current incantation and should not have been released. I'm having flashbacks to Mac OS 7.
    If you are interested in Mac OS X Server 10.5 and are considering purchasing, don't.

    I finally got my server to where I want it to be and it was at the expense of sanity and sleep. But, I'm all the wiser now and want to share with everyone on this board some of the things I learned in my upgrade from 10.4.11 to 10.5.1.
    To start, the service I was most compelled to use is iCal Server. For small businesses and home server users it really opens up a huge world of convenience to be able to share and update a single calendar.
    *DISCLAIMER: My setup works for the environment I needed it for and as such some of the services can be implemented differently. Also, there are numerous bugs in 10.5.1, and I've been hit by a few good ones.*
    My initial approach was to take the 10.4.11 server I currently use (running on a 500MHz dual-G4) and migrate it over to a new machine (1.25GHz dual-G4). I had to do this for obvious reasons, and it complicated my migration, but at the same time it provided me with a safety net. I took the old 40GB HD boot drive out of the old machine, put it in an external FW enclosure and "restored" the image onto the new machine. This way I was working with an exact copy of the server install and had a perfect backup on hand. I STRONGLY recommend backing everything up before you open your 10.5 Server DVD.
    I spent several day prior to the migration installing 10.5 server onto the new machine to understand how the virgin installation process worked and what the new server UI tools looked like. It's the same basic suit of tools but they've all been modified and things are in different places. Some good, some not so good.
    Once I understood how the new services interacted I decided to take the plunge and upgrade from 10.4.11 to 10.5.1. And initially it was disastrous (see initial post in this thread). Everything broke in new and different ways, and I screwed things up even more. So I punted and started all over again. And again. And again. Each time learning that 10.5 server has many more services that need to be set up in harmony than previous version of the OS. Getting it all right is not too difficult once you understand how and in what order. I'm going to try to list the sequence here.
    Oh, one word of advice: I had the luxury of use two monitors to set my server up. I consistently had the Console on the second monitor to observe everything that was going on in the server. I selected All Messages to be displayed and it helped out tremendously. When things got weird, I could see the sequence of events.
    During the upgrade installation you'll notice a few things that happen, one of which is an Open Directory LDAP upgrade. This should work without a hitch, but there's work that needs to be done to get it right.
    Once you start up the server for the first time and go to Server Admin, you'll want to turn off all of the running services except for DNS and Open Directory. If your installation goes like mine, Kerberos will be spitting out errors and they need to be fixed. Start by going into DNS and checking your zones. When you initially go into DNS after an upgrade it will ask you to upgrade you current DNS to the new version on the server. This is pretty painless. Make sure you have a Primary Zone and a machine listed under that primary zone. DNS is where I encountered my first bug. Your Primary Zone record should be Fully Qualified by default. The machine that's listed as your server (in my case the Primary Domain is '100greenwood.net' and the Machine is 'ns') should NOT have the Fully Qualified checkbox selected. If this box is selected, the name will not resolve. Bug #1. You need to go to the '1.0.10.in-addr.arpa.' listing, expand it and select 'ns.100greenwood.net' as the reverse mapping for the address. My IP range is 10.0.1.x and my server IP is 10.0.1.240. So I selected 'ns.100greenwood.net' under the reverse mapping pulldown. THAT fully qualifies the domain name (FQDN) and reverse lookup for the server. Once you've done that part you can move on to Open Directory.
    In Open Directory my 10.4.11 server was the Open Directory Master and I had kerberoized the server in 10.4.11. However, Kerberos was spitting out errors and I needed to fix that in order for the other services to work properly. Under Open Directory->Archive, archive your Open Directory database. Then, go to Settings and change the server role from OD Master to Standalone. This will wipe out the current Kerberos database. Then, change the role back to OD Master. When you do this, verify that the Kerberos settings (domain) match the DNS entry for your server exactly. If your DNS and server are set up properly, this should be automatically entered into the settings for you. If not, you have a problem with your server setup and DNS. I didn't so I don't have any advice if this isn't set up properly. Once you switch back to OD Master, go back and restore your OD database. This will fix most Kerberos issues as long as your DNS is set up properly.
    With DNS set up properly and Open Directory/Kerberos set up fresh, I could now start enabling services. I started with the old faithful AFP. Pretty straightforward except that I had to recreate all of my SharePoints and that's no longer done in Workgroup Manager. Oh a word of advice about Workgroup Manager: It seems that it can lock the LDAP database when it's open. Trying to work with Open Directory in Server Admin while Workgroup Manager is open will cause unpredictable results. I learned to keep WGM closed unless it was absolutely necessary to work it in. But I digress...working with Share in Server Admin lacks the ability to grab users and groups to modify permissions. It's annoying but the two monitors made it easier since I could quickly look up short names in WGM. Now, since my SharePoints were new and I copied them over from the old server, I wanted to propagate permissions down through the points. When I did this I notices in the Console that the assistant program that actually does this work had a memory allocation error and crashed. It did this consistently on the local server and when the same process was initiated from a remote Server Admin instance. It causes Server Admin to stall on the status bar indicating that it's propagating permissions. Bug #2. I had to Force Quit Server Admin and go into command line and belt out a few 'chmod' and 'chown' to get the permissions where I wanted them.
    Also, there seems to be a bug with AFP that causes it to reject clients' login information. It is sporadic and has happened in many different installations. It happened to me for a few hours, but it hasn't reeled it's ugly head yet. I am crossing my fingers that it's fixed. It seems to be related to the authentication between Kerberos and AFP. Getting Kerberos right is key to getting everything else on the server to work. And getting DNS to work right is key to getting Kerberos to work right.
    My SMB settings are pretty straightforward. I have a PDC and the domain is GWD. This server is also the WINS server. Those setting seamlessly came over with the upgrade. The strange thing, however, is that SMB was no enabled from the start although it was enabled on the original 10.4.11 server. I enabled it and it worked flawlessly. I have no issue with this (surprisingly enough).
    The Web services were another story. If you enable Web services and think everything is okay, you're kidding yourself. Apache 1.3 is enabled by default after an upgrade. The server home page won't render properly in Safari because of this. That, in turn, breaks most of the other web-enabled features in 10.5. You need to shut the service off and upgrade to 2.2. Make sure you test your web sites in 2.2 BEFORE you do this because you can't go back to 1.3. This is where a fresh copy of my 10.4.11 installation came into handy. I got good at 10.5 installs after a while. Once this was done I went into Web->Sites->Web Services and enabled Blog for Users and Wiki and Blog/Web Calendar in Services for Groups. Again, I wanted to get iCal working and these were the steps to get there (sans AFP and SMB).
    Now, with DNS, Open Directory/Kerberos and Web Services all running properly, I started up the iCal Server. There is really very little to do here other than making sure your host name is the DNS name of your server, the one that was selected for reverse mapping.
    At this point I was pretty much done with Server Admin and made my way over to Workgroup Manager to do some more calendar tweaks.
    I went into a few users and under the Advanced tab Enabled Calendaring. I then went to a group these users were in and 'Enabled the following services for this group on: ns.100greenwood.net' and clicked wiki and blog/Web calendar. With that done, it was finally time to go to the client machines.
    Since I had an Open Directory Master, I used the Directory Utility to add the OD Master to the client machine. Each time it couldn't automatically find the server, so I manually added it. I didn't use SSL in anything (yet) to keep things simple.
    The great thing about getting OD set up properly is that the clients can seamlessly leverage all of the services on the server via auto-discovery. You can bet that Apple will be using this just as aggressively as Microsoft uses Active Directory to integrate everything. Hey, it's a directory service and it's coming along well so far.
    Then I went into iCal to configure the clients. I went to Preferences->Accounts and added an account. I put a user name in, their password, used Kerberos for authentication and the client auto-discovered the correct calendar for the user. Very simple (after a full week of cursing and sleepless nights) with DNS set up correctly and OD/Kerberos working. Now, adding a group calendar required me to type in 'http://ns.100greenwood.net:8008/principals/groups/home/' into the Account URL window. Group calendars aren't auto-discovered.
    That was it. It took me over a week to figure all that out. I had errors with every single service and most things went completely wrong for me. Expect things to go wrong with your installations. They will. The logs and the Console are your friends. Google and these boards are also very close friends too.
    Some other notes: If clients suddenly cannot log into services, shut the service down at the server and restart it. This usually gives good results. Don't shut down Open Directory with all of the other services running. Open Directory and DNS should be the last two things to shut down in that order. If you are restarting all services, DNS should be first and OD second. Then everything else can work. Actually, there isn't a way to shut down OD, but this still applies if you are recreating your OD Master as I described above. There seems to be an issue with the way some services interact with Kerberos. Some security information can get cached and a restart of the service is one of the better ways to fix it (works in fixing the AFP-client authentication/disconnection issue described on these boards).
    So I'm happy to say that I've finally got my server in a position where I understand the beast and am more confident in supporting it because of my trial by fire.
    Now I'm going to bed.
    Good luck with your installations!

  • Reading files on a mac

    for my FileInputStream application
    on windows i point to c:\\ filename.
    but how the heck do you point to a file on a mac drive
    also , is there a mac forum on this site
    thanks.

    Unless you are interested in Mac OS 9, which works a little differently. I find it's just easier to use JFileChooser when referencing files not relative to the application, don't you think?

  • What do you recommend for me: MacBook Pro, iMac or Mac Pro?

    I haven't decided what Mac I should buy. It's pretty hard for me. I'm fascinated with the iMac, MacBook Pro and Mac Pro. But I'm not sure what Mac is good for me. For now, I use my laptop for web browsing, sometimes photoshop and writing stories on notepad. But I'll probably do more later on such as developing 2D games and making music on GarageBand. I might make my own website with podcasts and possibly take advantage of Mac OS X's DVD creation software. I will also dual boot (Windows & Mac OS X which I'll use the most) and play games on it.
    Money isn't a real problem. I only have $1,000 at the moment. But I'm going to get a job soon. I won't buy a Mac until the job is stable.
    I don't know what to buy and not sure which one is the best for me. I like all 3 of them! I really like portability because I can take it anywhere. But I already have a notebook (not a Mac). I need a Mac that will last me a couple of years. Again, I'm afraid that newer stuff will come out and my computer will be inferior. lol.
    So I'm hoping someone can help me come up with a decision. You guys/gals know more about computers than me. I'm new to Macs too. I became interested in Macs last year when I saw the Power Mac G5. I thought the tower looked awesome and then I started playing around with it.

    I've never had an iMac wear out. My last one lasted four years and the guy who bought it from me on eBay reports that his is doing fine. It got HEAVY use in a dusty environment.
    And Apple has been refining the iMac for years now. I keep hearing you emphasize durability, so that is why I am pushing it for you. No laptop will last as long. They operate at higher temperatures and take a beating. My Mac Book Pro already lost its back-lighting and has something wrong with the DVD eject feature. All repairable for free with Applecare, which I recommend. But my iMac will outlast my desire to own it, this I know for certain. I have the 20 inch and wish I had gotten the 24. If you're interested in my new 20", I will sell it to you for 1/3 off what I paid for it, and it comes with a transferable 3 year Applecare warranty. This way I could purchase the 24". It hadn't come out when I got the 20".
    But first, come to the conclusion that you don't need an Apple laptop. That's the threshold decision.
    Best of luck to you.

  • IOS Development Vs Mac OS X Development

    Hi there,
    I am a iOS programmer. I just want to know about how the future will be for Mac OS X programming..
    Because I am interested in Mac OS X programming...
    Thanks in advance.

    That is a fairly advanced topic. You are unlikely to find much help for it on internet forums. I suggest enrolling in the Mac Developer program for more detailed information and support.
    Here is a brief overview: http://developer.apple.com/library/mac/documentation/Darwin/Conceptual/KernelPro gramming/KernelProgramming.pdf

  • Question from a Mac-ignorant Boyfriend...

    Thank you in advance if you bother to read this and provide any advice...
    So, I have never owned a Mac and have used them on an extremely limited basis, thus my ignorance. My girlfriend, however, has expressed interest in Mac's in the recent past. Her birthday is coming up and she just graduated from college, so I'm thinking about getting a Macbook or Macbook Pro as a gift. The reason for this is that she has an ancient IBM laptop right now that has given her some trouble. She's starting a grad program and will be earning her PhD over the next 5 years, so I figure she needs a reliable laptop.
    Now, I know Mac's are media-intensive computers...she won't need to be doing any video editing or gaming and very limited photo editing. She'll mostly be doing word-processing, presentations, and internet. I realize a PC can do this just as well at a fraction of the cost, but dammit if those Mac's don't look freakin' awesome both in presentation and performance.
    So...I'd like to know if anyone has an opinion on the Macbook vs. the Pro. The Macbook seems the obvious choice since my g/f won't need all the extra processing and graphics card of the Pro...but I do not like the glossy display a whole lot and I'm also not a fan of the white plastic casing. Nitpicky, I know. Can anyone give me additional reasons for getting the Pro? I'm basically looking for either an enabler or someone to kick me in the ba**s and prevent me from throwing money away.
    Any and all opinions are more than welcome. Thanks in advance!!!

    John,
    You might be overlooking what is possibly the most powerful factor in all this...
    You mention that you have fallen in love with the physical design of these Mac portables, but have you actually used one yourself for any length of time, and to do anything of substance?
    Once you purchase one, regardless of which one, and both you and your girlfriend use it a bit, you will have truly experienced what it means to have and use a Mac. Put simply, you're going to fall in love with the way it works. Most of all, you will want one for yourself.
    What will you do then? How will this possibility figure into your decision regarding your first purchase? I recommend that you take this into consideration.
    Nevertheless, I also think that you should find out which one she would prefer to have. Perhaps she would prefer a Macbook, in which case the problem is solved for you. If so, and if you do decide at some later time to get one yourself, you could go with the Macbook Pro. Between the two of you, you would then have one of each, and either one of you could use the machine that is most appropriate at any given time.
    Speaking from my own point of view, my wife currently has a G4 iBook that she uses much as you report your girlfriend will use hers: internet, word processing, email, etc. I am the one in my family that does all of the "heavy lifting" such as video editing, etc. It's not that her machine can't do it, but that mine can do it much faster (17" Macbook Pro).
    This last may be important for you; that her much less powerful, and aging, machine can do almost anything that mine can do, just not as fast. Applied to your situation, this should indicate that the Macbook will be robustly "future-proof" for quite some time, even if not as long as a Macbook Pro. I really don't think you should consider this as a deal breaker.
    However I will say that my wife, if asked about the Macbook, would claim a preference for the Macbook Pro. Not because the Macbook wouldn't work well enough to suit her needs, but becasue she prefers a bit larger display. On this score, much will depend on your girlfriend's preference in this regard. Make sure she will be happy with the smaller display! If so, there should be no barrier to getting her the Macbook.
    Scott

  • Mac Home Automation

    Just wondering if anyone is interested in Mac home automation. I have been building a home theater using a Mac as the heart. It can control the lights, HVAC, sprinklers, and even my home theater.
    Check it out and let me know what you think.
    http://www.youtube.com/watch?v=5q-iighX42U
    http://ljungholm.dyndns.org:8080/groups/888macdoctor/

    This is very cool. I don't have nearly as complex a system but it has occurred to me to try something similar. I'm exploring the possibility of using an older Palm pilot that I have lying around.

Maybe you are looking for