Interface Controller does not exist

Having implemented Compliance Calibrator 5.3, I've configured the JCo and am getting the following error message below.
WARNING: *** Job Exception: Interface Controller does not exist for Component Instance VirsaXSR3_02 in Component Usage VirsaXSR3_02
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Interface Controller does not exist for Component Instance VirsaXSR3_02 in Component Usage VirsaXSR3_02
I have searched the forum and found only one other message pertaining to this issue.  I need to figure out how to address this error.  Here is what I have done already:
1. Tested the JCo - it tested and pinged properly
2. Tested the RTA user - the user has the necessary authorizations
I'm considering deleting and recreating the connector, but I don't see the point as the connector obviously connects to the backend.  I know this because I had some RFC errors that disappeared when I granted the authorizations to the user specified in the JCo.
Please let me know.
Thanks,
Santosh

Here you go.
Row     VSYSKEY SYSNAME SYSTYPE SYSCON1 SYSCON2 SYSCON3 SYSCON4 SYSCON5 STATUS  MGMTRLVNT       SYSCON6 SYSCON7 SYSCON8 SYSCON9 EXTOBJ
1       SANDBOX1        SB1     SAP     JCO     VIRSAXSR3_01_MODEL      VIRSAXSR3_01_METADATA   JAVA            0       0       rdgspd2s                                N     
2       SB3     SANDBOX3        SAP     JCO     VIRSAXSR3_03_MODEL      VIRSAXSR3_03_METADATA   JAVA            0       0       rdgspd2s                                N     
3       SANDBOX2        SB2     SAP     JCO     VIRSAXSR3_02_MODEL      VIRSAXSR3_02_METADATA   JAVA            0       0       rdgspd2s                                N     
4       SANDBOX Sandbox environments    LSYS    SANDBOX SANDBOX                         0       1                                             
5       SB2_RE  SB2_RE  SAP     JCO     VIRSAXSR3_01_MODEL      VIRSAXSR3_01_METADATA   JAVA            0       0       rdgspd2s                                N     

Similar Messages

  • Interface Mapping does not exist in runtime cache

    Hi,
    I have a scenario of RFC to SOAP, when I do the test I get the error message "Interface mapping http://sapxi.xxx.co.za/XXXXXX/ InterfaceMapping_Name does not exist in runtime cache"
    Regards
    Scharlotte

    Hi...
    Try to re-create the Interface mapping.
    And also test your Configuration with test tool where you can find the error on which step.
    if the error found in interface mapping.. do re-create the interface determination step and receiver agreement.
    Provide the payload which is taken from sxmb_moni --> Inbound msg --> Payload
    u can follow this blog for how to test configuration part:
    Test Your XI Configuration With The New Test Tool
    Regards,
    Parvathy

  • Error : Interface mapping does not exist in runtime Cache

    Hello Guys
    I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
    but the data is not getting transfered from one point to another.
    I checked SXMB_MONI and saw the following error:
    Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
    Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
    Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
    But still has the same problem.
    Can some one help me with this? I would really appreciate it.
    Thanks
    Ram

    Hi,
    We too faced the same problem.
    Do the following
    1) Delete the Interface mapping and re-create it
    2) First test your Config with test tool
    /people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
    I think here you will find the error on Interface mapp or Receiver agreement
    Then delete the interface det and receiver agreement also and re-create those.
    Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
    Then finally u will get the success
    Regards
    Seshagiri

  • Interface mapping Object does not exist in runtime cache

    I am getting the following error after importing IR into our test system (PI7.0 SP10).
    Interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 does not exist in runtime cache Exception of class CX_XMS_SYSERR_MAPPING
    You want to execute interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 .     However,the data of this interface mapping is missing in the runtime cache. Activate the interface mapping in the Integration Repository.
    I cannot change the mapping and reactivate - as this cannot be changed.
    I have run SXI_Cache, Cleared SLD caches on IR and ID and run cacherefresh=full, but no luck!
    The mapping is there and I can test it in the IR.
    Any thoughts?

    I had this problem today, maybe this helps someone when searching about this (at least this is the first hit at a very big search engine when searching for interface mapping does not exist...)
    I have a RFC => PI => File scenario. I was aware that this would need to be asynchronous so I set up the message interface (service interface for PI > 7.0) as asynchronous inbound. This is the file receiver part of the interface.
    Hints on the error: Audit Log in message details of RWB showed a line like this: RFC adapter received sRFC for ZMY_FM from <sender SID>/<sender client>. Attempting to send message synchronously. This of course could not work as file is asynchronous by default.
    Bottom line however was, to make the call of the sender RFC asynchronous by using "in background task" like so:
    CALL FUNCTION 'ZMY_FM'
       IN BACKGROUND TASK
       DESTINATION 'PI_DEST'
       EXPORTING
         t_file = lt_file.
    COMMIT WORK.
    Don't forget the commit work here.
    Hope this helps.
    Cheers
    Jens

  • Error in sender file adapter: source directory does not exist

    Hi,
    The PI system is 7.11
    I've created sender file adapter with following details:
    Transport Protocol : File System
    Source directory: /interfaces/In
    I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should be processed.)
    But still i get in Communication Channel Monitoring the following error:
    "Configured Source directory "/interfaces/In" does not exist.
    (i also tried to give the source directory as "interfaces/In" and as "//interfaces/In" but still the same error.
    Any suggestions as to what is wrong?
    kr
    Robert

    Actually, Need to use forward slash (/) to separate directory names in accordance with the Java specification.
    But wanted to try if that works..
    Also check directory name , path again as this is case sensitive...
    --Divyesh

  • AP Group VLAN "Feelgood" does not exists on controller.

    Hi,
    While appling tenplates from WCS, i getting status report error message AP Group VLAN "Feelgood" does not exists on controller.
    I have double  checked the perticular AP group WLAN is created & mapped to the correct interface in the controller. This is not first AP group created on the controller, other AP groups are working on the same controller.
    Is there any Bug?
    Thanks

    Typically you still need to make sure that the country codes are indeed configured on the WLC. Thing can change when you upgrade code as standards might of changed and regulations also. If your AP's are functional, then you should be okay and I wouldn't worry too much about it, but if after the upgrade, the WLC complains about country code stuff, then you just need to verify that the AP's country code is defined on the WLC. May times the AP will not join and if it does join, the radios might be disabled or in a down status.
    Sent from Cisco Technical Support iPad App

  • Message Interface does not exist in IR u0096 but it does!

    Hi, well again i have a problem. I am still trying to get the XI-demo Checkflight…. to run but there are some obstacles on my way.
    I just wanted to check a MI given in the ID to check the attributes and picked it in the ID to get linked to the IR but a pop-up appears saying
    “Message Interface does not exists in Integration Repository”
    What’s the reason for this because obviously it is there, still existing.
    I tried to refresh the cache of all XI-components, did a server restart but nothing seems to be working.
    On the other hand I have some other questions:
    -     Why is it not possible to delete an object (business system) from the ID? I know because of the dependencies of the different channels but it should be possible because of re-generation of the communication-channels (this was also my approach for solving the problem mentioned above!)
    -     When do I have to refresh the cache in general? Is it indefinite whenever I want to or it seems to be the right time because something is not running the way it should and it seems a little odd

    Hi Carsten Heinrich,
    This will help you,
    1)     Cache Connectivity Test
    In RWB component monitoring, we now have the option of checking whether the cache-connectivity is functioning correctly. This is useful when we are experiencing problems when updating the runtime cache. The system displays a separate window in which we perform the test. If no previous tests have been performed, the system displays a corresponding message. Otherwise, the system shows when and by whom the last test run was started, together with the result of this test.
      To start a new test run, choose Start Test.
    The system displays the first results of the test run. Since the whole test takes some time, we can update the displayed results if necessary.
    To Update the displayed results, choose Refresh Display.
    The overall result for each component is displayed as a green, yellow, red, or gray symbol. A green symbol is only displayed if both update steps for the runtime cache were successful, that is, they both have a green symbol.
    2)     Cache notification status
    a)     Start the Integration Repository.
    b)     Select Environment ® Cache notification.
    c)   Have a look at the entries for the relevant user and date.
    d)   Have a look at the entries for the relevant cache instance, user and date.
                   3)    Cache update and resend the message
    a)Start transaction SXI_CACHE.
    b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
    c)     Call transaction SM58 to check the status of the refresh process.If no entry for function module SAI_CACHE3_REFRESH_BACKROUND is Present any more the cache update is finished.        
             4)     Deleting the SLD Cache
      Many actions require  to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
    However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
    To clear the SLD cache, from the Integration Builder main menu, choose Environment  ®  Delete Cache for SLD Data.
    Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
    Regards
    Agasthuri Doss

  • Message interface does not exist in any software components

    Hi masters,
    I'm having problems with this message in my repository when I try to create an Interface determination with two interfaces mapping: "Message interface does not exist in any software components installed on this business system".
    note: I have read all the posts about this problem but nothing has solved it.
    I will describe more or less how is my SLD.
    First all, my Technical System is an Web AS ABAP (non a third party).
    I have created two receivers determination, with out problems, then, created the interface determination, with two Inbound interface, BUT, when I create a condition, the message appears, and the XPath doesn't shows the nodes for do the condition..
    I have checked the GUID, and that's good.
    NOTE: I have a second SWC but this is a third party... and when I test to do the same in this system, I have NO problems... so.. what is wrong with the Web As ABAP?
    Regards and thanks

    did you mean:
    SLD -> Technical System->Technical System Type: WebAsAbap-> Installed Products->Add New Product and add my Software Component???
    if is this, I have already done this, and still doesn't works.
    Thanks

  • Message interface does not exist in any software components installed on th

    Message interface does not exist in any software components installed on this business system.
    hello,
    When I check the interfaces on the business systems of 1 technical system, none of them have sender or receiver interfaces, hance I can't use them. The interfaces should ofcourse be on the Directory.
    I have deleted the business systems and the technical system and created them again, but no result.
    The product and software componets are in the technical sytem and business systems.
    Any help would be usefull.
    thanks,
    Job

    Hello!
    If someone will search in the future for this error, here is the solution:
    The error occurs if the GUID of the software component at the SLD is different to the one at the repository. Please compare the GUID at the SLD -> Administration -> Content Maintenance -> Dropdown "Component Version" -> Dropdown "Software Component Version". At the Integration Repository you select the Software Component Version at at the tab "Keys" you find the related GUID.
    The error occured because the Software component has been created manually at the system. The repository content came from another system via import with own SLD (and because of that with another GUID for the software component).
    Kind regards,
    Klaus

  • Message interface does not exist in any software components installed

    "Message interface does not exist in any software components installed on this business system"
    Essa é a mensagem de erro que estou tendo ao tentar configurar o XPath Receiver Determination do cenário SRVSC_WebAS_Outbound_ServiceStatusCheck.
    Já notei que a mensagem dá porque o meu BS da NFe não está com o SWCV SAP SLL-NFE 1.0. Mas isso só no ID porque no SLD ele aparece. Não sei mais o que fazer pra ele aparecer no ID. Já eliminei o BS, executei um refresh do cache do SLD, depois executei um refresh full e nada! Quando eu crio o BS novamente, ele vem sem o SWCV SAP SLL-NFE 1.0.
    Tive que configurar o XPath na mão para todas as SEFAZes!!!
    Já li vários threads a respeito desse erro e executei vários procedimentos sugeridos, mas nada.
    Alguém já possou por isso?!?

    para ser mais preciso, verifique no payload de envio e recebimento da mensagem de verificacao de status do servico se estao correspondentes ao que estao abaixo, essa mensagem é de verificacao do SEFAZ de SP (35) para o ambiente de homologacao
    (SENDER)
    <?xml version="1.0" encoding="utf-8"?><n0:nfeStatusServicoNF xmlns:n0="http://sap.com/xi/NFE/005a" xmlns:prx="urn:sap.com:proxy:PID:/1SAI/TASE95D30ADB76F1544C2D5:700:2009/02/10" xmlns:n1="http://www.portalfiscal.inf.br/nfe"><n0:cUF>35</n0:cUF><n0:tpEmis>1</n0:tpEmis><n0:tpAmb>2</n0:tpAmb><n0:nfeCabecMsg><n1:cabecMsg versao="1.02"><n1:versaoDados>1.07</n1:versaoDados></n1:cabecMsg></n0:nfeCabecMsg><n0:nfeDadosMsg><n1:consStatServ versao="1.07"><n1:tpAmb>2</n1:tpAmb><n1:cUF>35</n1:cUF><n1:xServ>STATUS</n1:xServ></n1:consStatServ></n0:nfeDadosMsg></n0:nfeStatusServicoNF>
    (RECEIVER)
    <?xml version="1.0" encoding="UTF-8"?>
    <nfeStatusServicoNFResponse xmlns="http://sap.com/xi/NFE/005a"><nfeStatusServicoNFResult><retConsStatServ xmlns="http://www.portalfiscal.inf.br/nfe" versao="1.07"><tpAmb>2</tpAmb><verAplic>SP_NFE_PL_005e</verAplic><cStat>107</cStat><xMotivo>Serviço em Operação</xMotivo><cUF>35</cUF><dhRecbto>2010-05-26T09:37:22</dhRecbto><tMed>1</tMed></retConsStatServ></nfeStatusServicoNFResult></nfeStatusServicoNFResponse>

  • Error - "Message Interface does not exist in any software components"

    HI
    This is an Idoc sender - SOAP receiver scenario.
    When I try to create the receiver determination, I get a warning message -
    " Message interface does not exist in any software components installed on this business system"
    I checked all the usual things & also reimported the IDoc metadata.
    Any suggestions are appreciated!
    Thanks
    Rachana

    Hi Rachana !!
    You should also check  if the given idoc type in mapping is the same that in the WE20.
    Also try to reactivate your integration directory objects by making any dummy changes.
    Check your receiver business system (I mean XI), that the logical systems are ok.
    Check this document (page 31):
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f2a9fa2-0a01-0010-32ac-d281db722b86
    Regards,
    Matias.
    Message was edited by:
            Matias Denker
    Message was edited by:
            Matias Denker

  • Account error: value does not exist in BB Company is displayed when Uploading a Journal to Oracle ADI Interface Table

    Environment:
    Oracle ADI version: version Oracle ADI 7.2.12.04.25 and patch number 9493800
    Microsoft Office version: 2003
    How to recreate incident:
    1. Create a budget worksheet for a company
    2. View the budget information
    3. Upload budget information to the Interface Table
    Actual Result:
    Account error: Value <value> for the flexfield COMPANY does not exist in the value set BB_COMPANY. I have noticed the same error is displayed regardless of whether I select options from the combo boxes or enter random numbers in the journal i.e. 0000 for each field.
    Expected Result:
    Budget information to be uploaded successful especially when the data has not been amended
    Questions:
    1. What is happening to cause this problem?
    2. What is the solution?

    The issue is resolved, no need to answer, the dbconnection class was calling the wrong db :(

  • WDRuntimeException: Instance of view controller SystemView does not exist

    Hi there,
    I'm working with SAP NetWeaver v7.0, NWDS 7.0.19 and IE v8 on Windows Platform. And have started with my first steps in front of Web Dynpro.
    The scenario is: I have three Web Dynpro views with tables (not embedded). All tables are setted with the property "selectionMode = none". The first and second table has just one column with cells from type of "LinkToAction".
    The navigation between the first both are working fine, but after clicking at one of the columns links in the second table, the third view is showing just an half second and then an error comes up:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Instance of view controller SystemView does not exist.
         at com.sap.tc.webdynpro.progmodel.controller.Component.getController(Component.java:369)
         at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.handleUIElementEvent(HtmlClient.java:939)
         at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.updateEventQueue(HtmlClient.java:382)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.prepareTasks(AbstractClient.java:93)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:316)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    When I reset the property value from "none" to anything in "selectionMode", all views are working fine, including the last one.
    Thanks for help and take care,
    Cengiz

    Ok, problem has been fixed. The reason was: I had defined "onLeadSelect = ANYTHING_SELECTED" (Event property) for the table and the LinkToAction-Element. Reset the "onLeadSelect" on the table level and the error should be solved.
    Thanks,
    Cengiz

  • Ask for help :( "%ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/17: Power given, but Power Controller does not report Power Good"

    This question is used a translator.... 
    Current conditions 
     - SW1 ----- Power injector ------ AP(cisco is not another model)
     - Port, AP, Power injector, Switch <-> Injector UTP cable  Problems occur even after replacement
     - Power injector <->AP UTP canle No exchange
     - Poe was OFF the function. This is because it is being used for Power Injector. -> Do not generate failure logs
     - But even if another AP is turned ON POE function, no error messages.
    SW1#show logging (5 mins cycle persists)
    May  4 10:37:32.527: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/17: Power given, but Power Controller does not report Power Good
    May  4 10:37:42.556: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/17, changed state to down
    May  4 10:37:43.562: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/17, changed state to down
    May  4 10:37:50.032: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/17, changed state to up
    May  4 10:37:52.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/17, changed state to up
    May  4 10:38:03.238: %ILPOWER-7-DETECT: Interface Gi1/0/17: Power Device detected: IEEE PD
    SW1#show cable-diagnostics tdr interface gi 1/0/17    <----- Issues AP         
    TDR test last run on: May 04 10:49:14
    Interface Speed Local pair Pair length        Remote pair Pair status
    Gi1/0/17  1000M Pair A     84   +/- 10 meters Pair B      Normal              
                                Pair B     84   +/- 10 meters Pair A      Normal              
                                Pair C     84   +/- 10 meters Pair D      Normal              
                                Pair D     84   +/- 10 meters Pair C      Normal              
    SW1#show cable-diagnostics tdr interface gigabitEthernet 1/0/18    <--------- Normal AP
    TDR test last run on: May 04 11:01:04
    Interface Speed Local pair Pair length        Remote pair Pair status
    Gi1/0/18  1000M Pair A     92   +/- 10 meters Pair B      Normal              
                               Pair B     92   +/- 10 meters Pair A      Normal              
                               Pair C     92   +/- 10 meters Pair D      Normal              
                               Pair D     92   +/- 10 meters Pair C      Normal  
    SW1#show cable-diagnostics tdr interface gigabitEthernet 1/0/1   <--------- Normal AP
    TDR test last run on: May 04 11:01:56
    Interface Speed Local pair Pair length        Remote pair Pair status
    Gi1/0/1   1000M Pair A     79   +/- 10 meters Pair B      Normal              
                               Pair B     79   +/- 10 meters Pair A      Normal              
                               Pair C     79   +/- 10 meters Pair D      Normal              
                               Pair D     79   +/- 10 meters Pair C      Normal              
    SW1#show power inline    <-------- (Check every 5 seconds)
    Module   Available     Used     Remaining
                   (Watts)     (Watts)    (Watts) 
    1              370.0      200.2       169.8
    Interface Admin  Oper       Power     Device                           Class   Max
                                                (Watts)                            
    SW1#show power inline | in 17
    Gi1/0/17  auto     off        0.0                 n/a                               n/a   30.0 
    SW1#show power inline | in 17
    Gi1/0/17  auto     on         15.4             Ieee PD                         0     30.0 
    SW1#show power inline | in 17
    Gi1/0/17  auto     on         15.4             Xirrus XR2426, 1.0G     0     30.0 
    SW1#show power inline | in 17
    Gi1/0/17  auto     faulty     0.0              n/a                                 n/a   30.0 
    SW1#show power inline | in 17
    Gi1/0/17  auto     off        0.0                n/a                                  n/a   30.0

    Plug the Xirrus AP directly to the switch port and see if the logs go away or not.

  • User or group does not exists.

    Hi,
    I am running an unattented installation of SQL on a server. I run it with the following configuration:
    ;SQLSERVER2008 Configuration File
    [SQLSERVER2008]
    ;************************* CORE ARGUMENTS *************************
    ; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance. 
    INSTANCEID="MSSQLSERVER"
    ; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter. 
    ACTION="Install"
    ; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books
    online, Business Intelligence Development Studio, and other shared components.
    FEATURES=SQLENGINE,REPLICATION,FULLTEXT,AS,RS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK
    ; Setup will not display any user interface. ***
    QUIET="True"
    ; Needed argument for silent installation
    IACCEPTSQLSERVERLICENSETERMS="True"
    ;*************************** OPTIONAL *****************************
    ; Displays the command line parameters usage 
    HELP="False"
    ; Specifies that the detailed Setup log should be piped to the console. ***
    INDICATEPROGRESS="True"
    ; Setup will display progress only without any user interaction.
    QUIETSIMPLE="False"
    ; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system. 
    X86="False"
    ; Use this parameter to install the English version of SQL Server on a localized operating system when the installation media includes language packs for both English and the language corresponding to the operating system.
    ENU="True"
    ; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature. 
    ERRORREPORTING="False"
    ; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature. 
    SQMREPORTING="False"
    ; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting
    Services (RS). 
    INSTANCENAME="MSSQLSERVER"
    ; Agent account name 
    AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Auto-start service after installation.  ***
    AGTSVCSTARTUPTYPE="Automatic"
    ; Startup type for Integration Services. 
    ISSVCSTARTUPTYPE="Automatic"
    ; Account for Integration Services: Domain\User or system account. 
    ISSVCACCOUNT="NT AUTHORITY\NetworkService"
    ; The name of the account that the Analysis Services service runs under. 
    ASSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Controls the service startup type setting after the service has been created. 
    ASSVCSTARTUPTYPE="Automatic"
    ; The collation to be used by Analysis Services. 
    ASCOLLATION="Latin1_General_CI_AS"
    ; The location for the Analysis Services data files. 
    ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data"
    ; The location for the Analysis Services log files. 
    ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log"
    ; The location for the Analysis Services backup files. 
    ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup"
    ; The location for the Analysis Services temporary files. 
    ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp"
    ; The location for the Analysis Services configuration files. 
    ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config"
    ; Specifies whether or not the MSOLAP provider is allowed to run in process. 
    ASPROVIDERMSOLAP="1"
    ; Specifies the list of administrator accounts that need to be provisioned. 
    ASSYSADMINACCOUNTS=”CRB\dsstest”
    ; Startup type for the SQL Server service. 
    SQLSVCSTARTUPTYPE="Automatic"
    ; Specifies a Windows collation or an SQL collation to use for the Database Engine. 
    SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS"
    ; Account for SQL Server service: Domain\User or system account. 
    SQLSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Windows account(s) to provision as SQL Server system administrators. 
    SQLSYSADMINACCOUNTS=”CRB\dsstest”
    ; Level to enable FILESTREAM feature at (0, 1, 2 or 3). 
    FILESTREAMLEVEL="0"
    ; Set to "1" to enable RANU for SQL Server Express. 
    ENABLERANU="False"
    ; Specify 0 to disable or 1 to enable the TCP/IP protocol. 
    TCPENABLED="1"
    ; Specify 0 to disable or 1 to enable the Named Pipes protocol. 
    NPENABLED="0"
    ; Startup type for Browser Service. 
    BROWSERSVCSTARTUPTYPE="Automatic"
    ; Specifies which account the report server NT service should execute under.  When omitted or when the value is empty string, the default built-in account for the current operating system.
    ; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
    ; The domain part of RSSVCACCOUNT is a maximum of 254 characters long. 
    RSSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Specifies how the startup mode of the report server NT service.  When 
    ; Manual - Service startup is manual mode (default).
    ; Automatic - Service startup is automatic mode.
    ; Disabled - Service is disabled 
    RSSVCSTARTUPTYPE="Automatic"
    ; Specifies which mode report server is installed in.  
    ; Default value: “FilesOnly”  
    RSINSTALLMODE="DefaultNativeMode"
    ; Full-Text filter launcher service account
    FTSVCACCOUNT="NT AUTHORITY\LOCAL SERVICE"
    I run the installation with the user crb\dsstest, but i get the following error:
    2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
    2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2011-12-28 12:59:02 Slp: Inner exceptions are being indented
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
    2011-12-28 12:59:02 Slp:     Message: 
    2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:     Data: 
    2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
    2011-12-28 12:59:02 Slp:       DisableWatson = true
    2011-12-28 12:59:02 Slp:     Stack: 
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
    2011-12-28 12:59:02 Slp:         Message: 
    2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: Error result: -2068578304
    2011-12-28 12:59:02 Slp: Result facility code: 1204
    2011-12-28 12:59:02 Slp: Result error code: 0
    Can anyone help me?

    Hi,
    I have tried to chech if it exists. If I add the user dsstest during the normal installation it is found. I am also logged in as the user dsstest. Then everything should be okay rigth, or is there anything else i can check?
    The following are the error details:
    2011-12-28 12:58:47 AS: Action: (Validation) Validating SysAdmin Accounts
    2011-12-28 12:58:47 AS: Action: Validation User Account (”CRB\dsstest”)
    2011-12-28 12:58:47 AS: Action: Validating Account
    2011-12-28 12:58:47 AS: Data: Account=”CRB\dsstest”
    2011-12-28 12:58:47 AS: Data: Account After Mapping = ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Attempting to get account sid for user account ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Attempting to get sid for user account ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: GetSidForAccount normalized accountName ”CRB\dsstest” parameter to ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Failed when querying buffer size
    2011-12-28 12:58:47 AS: Warning: Failed to retrieved Account SID. Reason: No mapping between account names and security IDs was done.
    2011-12-28 12:58:47 AS: Result: Error
    2011-12-28 12:58:47 AS: Result: Invalid
    2011-12-28 12:58:47 AS: Result: (Validation) Complete
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation for Analysis Service
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Entry
    2011-12-28 12:58:47 AS: Data:  Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Action: (Utility) Validate Collation Entry
    2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Result: (Utility) Valid
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Match
    2011-12-28 12:58:47 AS: Data: ASCollation=Latin1_General_CI_AS,SQLCollation=
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: Detect Whether it is Valid Collation
    2011-12-28 12:58:47 AS: Data: Collation = Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Action: (Utility) Retrieving embedded content
    2011-12-28 12:58:47 AS: Data: Resource Name =Microsoft.SqlServer.Configuration.ASExtension.LCIDs.xml
    2011-12-28 12:58:47 AS: Result: (Utility) Success
    2011-12-28 12:58:47 AS: Data: Locale ID=0x0409
    2011-12-28 12:58:47 AS: Result: Valid
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: Validating Start Mode
    2011-12-28 12:58:47 AS: Result: Success
    2011-12-28 12:58:47 AS: Action: Validating Allow in Process
    2011-12-28 12:58:47 AS: Data: AllowInProcess=1
    2011-12-28 12:58:47 AS: Result: Success
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: ----------------------------------------------
    2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\aml021” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
    2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2011-12-28 12:59:02 Slp: Inner exceptions are being indented
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
    2011-12-28 12:59:02 Slp:     Message:
    2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:     Data:
    2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
    2011-12-28 12:59:02 Slp:       DisableWatson = true
    2011-12-28 12:59:02 Slp:     Stack:
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
    2011-12-28 12:59:02 Slp:         Message:
    2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: Error result: -2068578304
    2011-12-28 12:59:02 Slp: Result facility code: 1204
    2011-12-28 12:59:02 Slp: Result error code: 0
    Do you need more information then above? The above chech do not fail for the network service:
    2011-12-28 12:58:46 ACE: Formatting user name 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Formatted user name is 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword started with userName = 'NT AUTHORITY\NETWORK SERVICE', userNameRequired = 'True', mustBeDomainAcct = 'False'
    2011-12-28 12:58:46 ACE: Validating username 'NT AUTHORITY\NETWORK SERVICE' and password '<empty>'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Getting sid for service account 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: SID for user account is 'S-1-5-20'
    2011-12-28 12:58:46 ACE: Validating service account is not LocalService
    2011-12-28 12:58:46 ACE: Validating service account is a user account
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 ACE: Validating service account can be used if current machine is domain controller
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Checking if service account must be a domain account
    2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword completed
    2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/SSIS/Public was found in the datastore.
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/AS/Public was found in the datastore.
    2011-12-28 12:58:46 AS: ----------------------------------------------
    2011-12-28 12:58:46 AS: Action: Logging Input Values and it's Sources
    2011-12-28 12:58:46 AS: Data: Parameter=ASSVCACCOUNT,Source=ConfigFile,Value=NT AUTHORITY\NETWORK SERVICE
    Do you have any idea what is worong?

Maybe you are looking for