Interface-Establishing relation of idoc created and Purchase requisition

Hi All,
I have created a program wherein idocs are generated. Its gives rise to Purchase requisition.
Can you please tell me how to show the PR created against the idocs that are generated in the spool list?
Please note the function module creating the idocs does not return the PR no. generated.
Any alternate solution to this is welcome.
Thanks,
Abhhishek

Done

Similar Messages

Relation between sales order and purchase requisition in MTO senario

Hi:
guru,In MTO sinarnio,for example strategy group is 20 or 50,how to get the raw material requisition according to every sales order item,semi-finished production orders should be exploded to raw material purchase requisition.In other words, how to beulid the relation between them and which tables data can be retrieved?your advice will be appreciated.

Hi Wang,
To view Sales Order Itemwise status, use MD4C.
Keep patience becuase in first go through it may look bit confusing.
Secondly, to generate Component requirements there are two ways.
1) Use MD41 - Run it on FERT code. It will generate requirements upto last level of BOM
or
2) Use MD02
2nd option would not work if MRP type 'M0' or equivalent is used in FERT Material master. In that case only 1st option would work.
Hope your question is answered.

Sufficient stock but MRP create planned order and purchase requisition .

Hi Expert,
After MRP run planned order and purchase requisition created . but the problem is for child material sufficient is there but still PR and plnd order is created .
MRP type PD, LOT size EX,Strategy group 10, for testing purpose I made safety stock 0, min lot size 0 , max lot size 0.
I cant find the cause why MRP create PR and Pland order for the material which has sufficient stock. Please help.

Dear Anirban
could you check the following master data value:
Lot size -> MB Monthly ( only for test)
Rounding value -> null
Strategy 40 MTS.
You can try with this setting in order to figure out what is the problem.
You can check also orizzon planning and re-scheduling (set to 999).
Let me know if i have been useful for you
Daniele

How can I save books I've created and purchased in iPhoto?

I've created and purchased approximately 10 books in iphoto. I'd like to save them for viewing and re-ordering at a later date, I can't seem to find any way to do this and its very frustrating. Now several of the books are missing photos and text throughout.
Is there anyway to save print products?!

Books to not actually exist - they are simply database entries - so you just keep the iPhoto library that they are ins
You can duplicate the iPhoto library and delete everything except th ebook and the photos for it so yu have a small library to archive the book
LN

Is there any way to create a Purchase Requisition without Purchase Inf Rec?

Hi,
i am dealing with the Preq creation for services when there is not any previous contract and i have noticed that the vendor and the net price are posible to populate them directly in the Purchase Requisition. if then i try to run the ME59 it is not possible to automatically convert it to a Purchase order because there is no PIR (when i assign the source of supply in the Preq then the PO is correctly created using ME59).
I have been reviewing customizing but there is not any point related to that.
Someone knows if it is possible to create a Preq for services without PIR?
thanks
ivan

Hi,
For Service auto- PO from PR, you need to activate Automatic Purchase order creation for Service requisitions in ML91 t.code.
Note:
For material :automatic PO creation from PR, follow the steps.
1) Material Master purchasing view tick automatic PO check box
2) Vendor Master purchasing view tick automatic PO check box.
3) Maintain Source list for Vendor & Material.(ME01)
4) Maintain Purchase Info Record.(ME11)
5) Create a Purchase Requisition.(ME51)
6) Use T.Code: ME59 & execute for PR for vendor, you will be able to create automatic PO.
During creation of PR , select check box of Source Determination in the 1st screen of ME51
Ensure that Purchase Info Record should be there.
If you have more than one vendor then fixes only one vendor in source list.
Regards,
Biju K

Error when creating a purchase requisition in reference to a contract.

Hello All,
My client have a requirement that , He wants to create a purchase requissition with Item catogery-B and account assignment-K
with reference to a contract.
when we are trying to create a purchase requisition with Item catogery-B and account assignment-K
with reference to a contract the system is throwing an error: "Item categories in agreement and requisition incompatible".
I had searched for the relating documents and tried all the conbinations but could not find the solution.
Could any body help in this regard.
thanks in advance.

Hi Gayathri
I thought so. So that means you are unable to create a contract with the combination of K and B which is why you are not able to adopt it in the PR with the same results.
As far as entering the limit goes, you would be making a value contract in which you would have to enter the value of contract that you need to create for vendor. Also, for the second error, once you have created a contract with the particular account assignment, u cannot change it. You would have to create a new contract with the desired account assignment category and then try creating a PR. Hope this helps!

Purchase order and purchasing requisition .

Hi
What is the difference between Purchase order and Purchase requisition . ?
And why cube are different for them ?
Regards

A purchase requisition is an internal document that's created to initiate a procurement transaction. The requisition is created to identify the materials that are needed to be acquired and when they're needed. Once completed by the initiator, it's sent to the appropriate approvers.
Upon approvals of the requsition have been provided, and a vendor is selected, a purchase order is created. The purchase order is an external document whereby an agreement is made to procure the materials at an agreed upon price and delivery schedule
The InfoCubes for each of these is different due to the nature of the documents (internal v. external).

Error while creating a Purchase Requisition T Code ME52N

Dear Freinds,
The users are trying to create the Purchase Requisition, however the system gives the error message that the GL Account xxxxxx cannot be used, as the comparison of the field selection strings are not comparable with the Account Assignment Category E. Message no. is ME045. How could we resolve this?
Thanks for the help.
Regards

Dear,
check the FSG for the GL Account 200010 and go to TCcode OBC4 and check the status of field 'Asset number / subnumber' and then go to TCode OME9 and select A and check the field status for field 'Asset number / subnumber'. Status at both areas are different hence system is not accpting. Make status identical.
Regards,
Sandip

Questions on Rules-Based ATP and Purchase Requisitions for STOs

Hello experts,
We are working on rules-based ATP configuration and have several questions about the functionality. Iu2019m hoping that some of you are using this functionality and can help give us direction.
In our environment we have multiple distribution centers and multiple manufacturing plants. We want to confirm sales orders against stock and production orders in any of those plants, depending on the locations that have stock or planned production. For example, we will place a sales order against plant A. If there is not enough stock in plant A then rules-based ATP will use location determination to check in plant B, then C. The scope of check on the ATP check will include stock and released production orders. We will configure plant A as the u201Cconsolidation locationu201D so if stock is found in plants B or C then stock transport orders will automatically be created to move the stock to plant A before shipping to the customer.
We have configured rules-based ATP and this functionality is working well in our Development system. The ATP check is executed and uses the rules-based ATP to find eligible stock in other plants. The system is also creating purchase requisitions to move the stock to the consolidation plant.
Our first concern is that there doesnu2019t appear to be any firm linkage between the sales order and the resulting purchase requisition. For example, if we create sales order 123 for plant A and the rules-based ATP finds stock in plant B it automatically creates a purchase requisition 987 to move the stock from plant B to plant A. However, there doesnu2019t appear to be a linkage between sales order 123 and purchase requisition 987. For instance, if we delete sales order 123 the purchase requisition doesnu2019t get deleted.
Our second concern is that the quantity on the purchase requisition can still be confirmed against later sales orders. For example, say the above scenario resulted in a purchase requisition 987 that consumed all the stock available in plant B. We then create a second sales order 456 for the same product. Plant A is out of stock so the rules-based ATP looks in plant B. We would expect that plant B would also not have any stock because itu2019s all been consumed by the purchase requisition. Instead, the system creates a second purchase requisition to move quantity from plant B to plant A. Itu2019s as if the system doesnu2019t realize that the purchase requisition 987 is already planning to move stock out of plant B.
Does anyone have any thoughts or suggestions on these two scenarios? Is there a way to configure the system so there is a hard linkage between the sales order and the purchase requisition so that if the sales order is deleted then the purchase requisition is also deleted? Should ATP realize that purchase orders are consuming inventory and not allow later sales orders to confirm against that same inventory? Any advice or experience would be greatly appreciated.
Thanks,
David Eady
Application Delivery Team Lead
Propex, Inc.

Hi,
The scheduling is done in SCM, and from there, whenever the RBA is triggered, the calculation is done always with the old route in SCM. Until you get back to R/3 this is when your route is determined. But the ATP check is always with the original route. So the idea would be that you change the values of the route while still in APO, this is possible via the user exit. Should be done in scheduling in APO.
Hope this information is helpful.
Regards,
Tibor

MRP creating additional purchase requisitions for the existing sales order

Hi,
We have scenario where we switch materials from POD material to ARP material. POD material is just like make to procurement which creates purchase requisition and purchase order upon saving the sales order. ARP (Auto replenishment) material creates purchase requisition based on sales order and re-order point while running MRP.
When the material is POD title, it created purchase requisition and purchase order (example: 4500000110) while saving the sales order (example: 1000000010) for the quantity 10. After some time this material is switched to ARP and it has open sales order (1000000010) and purchase order (4500000110).
We have special MRP run for ARP materials based on MRP type, which creates purchase requisition.. What is happening is when we run MRP; it is creating new purchase requisition for the old sales order (1000000010) for the quantity 10. But old sales order (1000000010) is already having purchase order (4500000110) to fulfill. So we donu2019t want to create new purchase requisition for the old sales orders. It should create purchase requisition only for new sales orders.
Please advise
Thanks in advance
Srinivas

Mangesh,
If the components are Inhouse production then you can think of using collective orders by assigning special procurement key 52. If raw material exists then your requirement cannot be met..as i think your scenario is of assembly processing. The idea of assembly processing is that component materials will always be available and only assembly will be done based on Sale Order.
Regards,
Prasobh

Best Practice while creating Contract, Purchase Requisition, Purchase Order

Hi
What is the best practice with respect to Contract & Purchase Requisition?
IN T Code ME31K, there is a button Reference to PReq, meaning that we can create contract with using Purchase Requisition. (We have done the same)
While creating the Purchase Order using Contract, we could find Purchase Requisition reference in the Purchase Order; similarly when we created the Purchase Order using Purchase Requisition, we could find Contract reference in the Purchase Order.
I have done the following:
1. Create a Contract.
2. Create a Purchase Requisition
3. Assign Requisition and Create Purchase Order using T Code ME57.
4. Create Purchase Order
Here in this case we could find references of both Contract & Purchase Requisition.
I just want to know what Practice should we adopt / advise while creating Contract, Purchase Requisition. & Purchase Order?
Regards,

Hi,
In ME51N Screen, enter Contract number in the "AGREEMENT" TAB and if more items in the contract, you can mention the item number in the next TAB to the AGREEMENT TAB and then proceed with creating PR by entering other details. This TAB you can find in the 4th column from extreme right end of PR screen.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Sep 10, 2009 2:23 PM

What is the exact difference between Purchse order and purchase requisition

Hi all,
What is the exact difference between Purchse order and purchase requisition.
Thx

Hi,
<b>Purchase Requisition</b>-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Related Table EBAN
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
<b>Purchase Order(PO)</b>-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Tables:EKKO,EKPO
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Vendor, Material ,Qty are mandatory for PO.
Regards,
Padmam.

Refrence number in Production order and purchase requisition

Dear All
This is MTO scenerio where sales order is created with refernce to quotation,
Subsequently in MRP run it creating sales order reservation for quotation number not sales for sales order number
similarly while creating purchase requisition it is displaying refernce number as quotation number
My requirement is instead of quotation number sales order number should display in production order and purchase requisition
All answers r suitably rewarded
regards

Hi
Pl check schedule line category you have set for quotation.
In sch. line for quotation remove checkmark for transfer of requirement and remove automatic Pr generation.
This will give required result.
Regards
Mandar

Block Plan Order and Purchase Requisition in Sales order creation.

Please tell me, how to block Plan Order and Purchase Requisition while creating Sales Order. When we create a sales order, plan order and purchase requisitions are also created by their own, please tell me, how can we block them while creating sales order. Please do let me know as soon as possible.

hi,
generally thy wil not be created automatically.
may be som configuration or exit is used in ur system.
check in debugging mode while saving ur salesorder.

How to create a Purchase Requisition for a material component in WBS or NW?

Hello All,
I have created a project with the following structure:
Project Defination (Construction of Sub station)
      Main WBS
               Level 1 WBS
                         Level 2 WBS
                                   Network for level 2 WBS
                                                  Activity (Procuring Material)
                                                             Material Component - MATXXX (Stock Item)
Now in the above structure i have a activity where in i am procuring all the materails required to construct a Substation.
So under this activity i have assigned all the materials which are needed to build Substaion.
After i change the status of the project to release, there a reservation created for the quantity of the material which i have mentioned in the material component under the activity.
Now my querey is, how should i create a Purchase requisition for the reserved materail quantity in order to bring in the stock against the WBS / network / Project ?
Awaiting your reply.
Thanks and Regards,
Sudarshan.

Hi Sudarshan,
In your case you can run Me5J to check the list of PR created against your project.
Then Create PO and similarly you can check list of PO in Me2J.
Then followed by GR and check if any GR release exist in MIGO. Then once after doing GR you can check the Material in Stock which will move material from Unrestricted stock to Project Stock which you can check it in MMBE.
Then you can do the Good Issue in MIGO itself and run MIRO to complete the cycle.
Regards'
syed

Interface-Establishing relation of idoc created and Purchase requisition

Similar Messages

Maybe you are looking for