Internal error: SHA-1 not available

The password encryption application works fine wherever we have tested it except this particular TRU64 box. We hava HP version of java 1.4.2-5 on this box, which is basically built on Sun's 1.4.2-11. I have been having this problem for a while and recently reinstalled J2SDK. Nothing seems to help other than getting a different exception.
If I have below order of security.provider in java.security file, I get the exception mentioned in the Subject line.
security.provider.1=com.sun.crypto.provider.SunJCE
security.provider.2=sun.security.provider.Sun
When I reverse the order, I am getting below exception:
Java.security.InvalidKeyException: Missing password
Any help in getting this resolved is greatly appreciated.

I just got this resolved. I realized that password encryption is done on an IBM JVM, so the decryption should also be done with IBMJCE(not sure if this is true), I have changed below in java.security
security.provider.1=com.ibm.crypto.provider.IBMJCE
security.provider.2=sun.security.provider.Sun
security.provider.3=com.sun.crypto.provider.SunJCE
then, I got a ClassNotFoundException for Debug class in some ibm package. I had to include ibmpkcs.jar along with ibmjceprovider.jar in the classpath and it started working fine.
Regards,
Prashanth

Similar Messages

Java.lang.InternalError: internal error: SHA-1 not available

Hi All,
When starting my j2ee & portal I get the following error:
java.lang.InternalError: internal error: SHA-1 not available
Does anybody have an idea about this error?
Thanks
Steven

Hi All,
When starting my j2ee & portal I get the following error:
java.lang.InternalError: internal error: SHA-1 not available
Does anybody have an idea about this error?
Thanks
Steven

Internally required memory is not available in SMQ2

Hi All,
In our XI Production server one message in SMQ2 (Inbound) has been stucked.
Error details "Internally required memory is not available ".
This IDOC is having a size of 552 MB, when I checked the sap fourms I found that there is one instance profile parameter which is req to process a large message.
icm/HTTP/max_request_size_KB
The parameter can also be used in the SAP Web Dispatcher.
The default is 102 400 (100MB).
Do we need to set this parameter in our instance profile???
Currently this parameter is not present in our Production enviornment.
Pls suggest.
Regards,
Prashant

I will suggest that if icm/HTTP/max_request_size_KB is not set then set this up with a value higher than the size of the stuck IDOC and give it a try.
now icm/HTTP/max_request_size_KB is not dynamically switchable so you'll have to add the parameter via RZ10 and restart your system.
Also you can rad the XI tuning guide,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
Regards
Juan

Report error service is not available

Hello,
I find the following error on several locations in my SIPstack logs on my Edge Server:
ms-diagnostics: 2019;reason="Report error service is not available";source="standard.kressmark.com"
What service is this referring to?
How can we troubleshoot this error message further?
Any additional information about this topic would be appreciated!
/mk
The full INFO message:
L_INFO(TF_PROTOCOL) [0]0A40.1148::03/10/2014-17:14:03.968.000000ad (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
Trace-Correlation-Id: 2161867164
Instance-Id: 000000F0
Direction: incoming;source="internal edge";destination="external edge"
Peer: standard.kressmark.com:5061
Message-Type: response
Start-Line: SIP/2.0 503 Service unavailable
From: "Mattias Kressmark"<sip:[email protected]>;tag=45e334cc8d;epid=8ff7cc2b20
To: <sip:[email protected]>;tag=FD66AF22DAE1582D6D94354611261F35
CSeq: 1 SERVICE
Call-ID: 9316261cef2141d3815a94c386e180d6
Via: SIP/2.0/TLS 17.21.122.15:49348;branch=z9hG4bKB54C0D77.B76658C4DF13234B;branched=FALSE;ms-received-port=49348;ms-received-cid=4600
Via: SIP/2.0/TLS 192.168.1.10:51983;received=81.217.34.250;ms-received-port=51983;ms-received-cid=100
ms-diagnostics: 2019;reason="Report error service is not available";source="standard.kressmark.com"
Server: RTC/4.0
Content-Length: 0
Message-Body: –
$$end_record

Hi,
Did you deploy Monitoring server in your Lync server environment?
Please update to the latest version for Lync server 2010 and then test the issue again.
http://technet.microsoft.com/en-us/lync/dn146015
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

When I try to import, I receive the following message: "An internal error has occurred: not enough memory". I always download my photos onto an external hard drive.

Yesterday,I downloaded an update for Lightroom 5. Now when I try to import, I receive the following message: "An internal error has occurred: not enough memory". The message comes up right after I click import, before I choose a file to upload.Here is the information I can think of that might be needed to answer this question:
- I always download my photos onto an external hard drive.It is about 10 % full.
- It says I have Lightroom 5.6 64 bit
- I am working from a newer laptop (Windows). The internal drive on the laptop has 289 gb and I am using 61 gb total memory.
- I have edited 2794 photos in Lightroom and it is all in one catalog.
- I did not have this problem until I made the update. I did have my first "bug" earlier this week when one of my photos had a line show up through the middle of it when I exported it. I was able to export it a second time without the line.
If there is more info. needed, let me know. I do photography as a hobby and know enough about Lightroom to edit out blemishes and adjust color balance, but not too much more, so forgive my ignorance if this is an obvious fix.
Sincerely,
Adrianne

Not Enough Memory typically refers to RAM. How much RAM do you have on your 64-bit OS computer? Do you have other programs running that may be using most of the memory?

Urgent: SQLException: Internal Error: Image is not in 8.1 format

Hello there,
I have never come accross such error.
Scenario
1 using JDeveloper EA1, Database 9i (9.2.0.6)
2 calling Oracle package procedure with in/out parameters.
3 Package has been imported into jDeveloper (jPublisher) with defaults settings.
4 procedure call is successfull, but when accessing out value getting this error
Code
try{
// imported package
PailinWebPolicy webPolicy=new PailinWebPolicy(conn);
System.out.println("web issue policy");
// call of package procedure both parameters are in/out
webPolicy.issuepolicy(policyData,errors,processStatus);
System.out.println("web issue policy done");
result=processStatus[0];
System.out.println("result assigned policy length "+policyData.length);
Wtpolicycore resultPolicy=policyData[0];
System.out.println("policy data assigned");
// error at accessing getPolicyno
String policyRef =resultPolicy.getPolicydata().getPolicyno();
System.out.println("policy ref assigned");
catch(SQLException e)
System.out.println("Exception "+e);
System.out.println("Exception "+e.getErrorCode()+" state "+e.getSQLState());
opus.close();
output:
web issue policy
web issue policy done
result assigned policy length 1
policy data assigned
Exception java.sql.SQLException: Internal Error: Image is not in 8.1 format
Exception 17001 state null
Any idea what might be wrong? I dont see any error on db side at all.
ferdo
Message was edited by:
frpkoo

I found similar bug reported on Metalink on April 8,2005
Bug no 4294423
Getting java.sql.SQLException: Internal Error: Image is not in 8.1 format Error Code: 17001 When running JDBC program that access many User defined Types .
But cannot find out what is the status of it.
Any idea?
ferdo

Mail Error: ORA-29278: SMTP transient error: 421 Service not available

I write process to send mail, it is running ok, but I have error ORA-29278: SMTP transient error: 421 Service not available.
SMTP Host Address : localhost
SMTP Host Port : 25
When I connect to database as SYS and run : exec apex_mail.push_queue result is :
Pushing email: 1225814842675154
Pushed email: 1225814842675154
PL/SQL procedure successfully completed.
Please explain me what is happened!

Hi;
What is DB version?
Please see:
From Master Note For PL/SQL UTL_SMTP and UTL_MAIL Packages [ID 1137673.1] check Note 604763.1 "ORA-29278: SMTP transient error: 421 Service not available" When Using UTL_SMTP to Send Email.
Regard
Helios

ORA-29278: SMTP transient error: 421 Service not available

Hi all,
I'm using Oracle 10g working on Windows XP Home.
I'm trying to send a basic mail from my stored procedure.
When I tried to run the code, I get ORA-29278: SMTP transient error: 421 Service not available.
Below is the code I'm trying.
CREATE OR REPLACE PROCEDURE SEND_MAIL (
msg_to varchar2,
msg_subject varchar2,
msg_text varchar2 )
IS
c utl_smtp.connection;
rc integer;
msg_from varchar2(50) := 'Oracle9.2';
mailhost VARCHAR2(30) := '127.0.0.1'; -- local database host
BEGIN
c := utl_smtp.open_connection(mailhost, 25); -- SMTP on port 25
dbms_output.put_line('ok');
utl_smtp.helo(c, mailhost);
utl_smtp.mail(c, msg_from);
utl_smtp.rcpt(c, msg_to);
utl_smtp.data(c,'From: Oracle Database' || utl_tcp.crlf ||
'To: ' || msg_to || utl_tcp.crlf ||
'Subject: ' || msg_subject ||
utl_tcp.crlf || msg_text);
utl_smtp.quit(c);
EXCEPTION
WHEN UTL_SMTP.INVALID_OPERATION THEN
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
WHEN UTL_SMTP.TRANSIENT_ERROR THEN
dbms_output.put_line(' Temporary e-mail issue - try again');
dbms_output.put_line (sqlerrm);
WHEN UTL_SMTP.PERMANENT_ERROR THEN
dbms_output.put_line(' Permanent Error Encountered.');
END;
Below are the possibilites I tried..
I tried to ping localhost.. This is the output I get
C:\Documents and Settings\Me>ping localhost
Pinging polasa [127.0.0.1] with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
In one of the thread, a user suggested to do the following
Go to Control Panel->Add or Remove Programs->Click on
Add/Remove Wndows Components
Check IIS check box.
Select Internet Information Service (IIS) option and click on Details button
Check whether SMTP Service is checked or not.
If not selected then select SMTP check box.
This process should be done on server.
It will help out from ORA-29278: SMTP transient error: 421 Service not available
problem.
There is no IIS in my Windows Components..
Any suggestions? Thanks in advance

It sounds like you don't have an SMTP server running on your local machine.
Even if you install IIS (or some other SMTP server), that is probably not enough to send email outside of your machine because your machine is unlikely to be trusted by the downstream mail servers. If you are running this in a company, you'll need to talk to your company's mail admin to determine where the corporate SMTP server is running. If you running this at home, you'll need to find out from your ISP what SMTP servers are available to you.
Justin

Internal error: doc.balance not zero F110

Hi All,
I need help from your side,
While doing F110 and when I see the proposal log I found there was message saying
Internal error: doc.balance not zero / comp.code XXXX vendor XXXXXXXX
Balances: 0.00 EUR / 0.00 EUR
Balances: 800 / 0.00
So can some one guide me on this.
Thanks in Advance.
Regards,
Kiran

I believe you are paying something in EUR which is being cleared perfectly.
However, its value in other currencies (maybe your local currency?) is not 0 because the invoice and the payment were made in different moments and you don't have configured a Payment Difference Account.
Check that configuration in OB09 to validate that your account has an account for exchange rate differences.
Otherwise, try to pay it manually through F-53 to see what the problem is.
Hope this will help.
Regards,
Fede

Java.sql.SQLException: Internal error: Data array not allocated

We got an error as follows: 'java.sql.SQLException: Internal error: Data array not allocated'. Does anyone know what does this error means? Thanks!

Duplicate post:
Re: ORA - 17044. Confused, please help
Hippo,
I have answered you in the other post.
Good Luck,
Avi.

Business Rule error: Accounts are not available in the rule table

Hi everybody,
I have a problem running the Business Rule for the profit/loss copy to the equity account.
The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
Then I created the related script logic (ID=CALCACCOUNT):
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY_M = %CATEGORY_M_SET%
CURRENCYLABEL = %CURRENCYLABEL_SET%
TID_RA = %TIME_SET%
CALC=PROFIT
*ENDRUN_PROGRAM
Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
Thanks
Filippo

Hi James,
Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
Any other suggestions?
Regards,
Vincent

I am getting a message Internal Error Instacast keys not defined when I open one of the local tv news apps on my iPad. What do I need to do to fix it?

I am getting an error message "Internal error Instacast Keys not defined" when I open a news app from one of my local tv stations. What is causing this?

Hello, MommaLloyd24.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

CIMC on C210 server throws Error 2001: Service not available message

I am trying to configure vmware on a brand new C210 server for the first time and the directions say to access the CIMC and load the vmware media. Sounds easy enough except every time I go to the CIMC webpage I recieve an " error 2001: Service not available" message on every page I go to and none of the server info fields are populated. If I try to make any changes and save my settings the same message pops up and no changes are saved. Almost like the CIMC doesn't recognize the server or hardware. I ran the host update utility just now and upgraded the firmware for everything to the latest version but still no progress. Anyone have this happen or know how I can fix this?
Thanks in advance!
Jess

I got it working on one of the servers, and havent tried the same solutions on any other server.
What i did was manually adding an IP adress to the management IP, then save the config before rebooting. After rebooting i put it back to get IP from DHCP, and saved the config. After a secound reboot i was able to use the mangement interface without the 2001 error.
I'm not sure if it will work on the rest of the servers, but it's worth a try
Regards
Alex

HT3887 I m not able to found Bluetooth in my Macbook Pro. Error is Bluetooth : Not available.

I am not able to found Bluetooth in my Macbook Pro. Found error is Bluetooth not available. Please inform me.

Welcome to the Apple Support Communities
Somehow, OS X doesn't detect Bluetooth in your computer. First, reset the PRAM and the SMC, and see if you can use Bluetooth then.
If not, hold Command and R keys while your computer is starting to start in OS X Recovery, and reinstall OS X. If, after reinstalling OS X, you can't use Bluetooth, there's a hardware issue with your Mac, so take your Mac to an Apple Store or reseller

'Not enough memory' + 'Internal error' x 'Could not render the database' = Parting of company :(

I can’t believe the amount of concern / disappointment / frustration spread across every associated Fireworks forum re: CS5’s
"An internal error occurred"
"Could not render the database"
"Not enough memory"
"Crash without notification"
Etc.,
We installed the CS5 trial – being more than wary about Adobe’s past releases – and lo and behold, all of the above beared ‘true’!
This is nothing new of course, we’ve all been experiencing this since CS3 – but hoping against hope - a newer release would solve the poor memory management and general ‘bug-ridden’ code; alas - as per usual, Adobe has not responded with any pro-solution based action, but successfully furthered our frustration with a couple of fresh gimmicks without strengthening the core software.
As an avid fan of adobe software […and a Fireworks freak] working in a design house that has many different employees with widespread software tastes – I eventually said ‘enough is enough’ after the umpteenth crash [as of 3 weeks ago] and have revisited the Rebel Alliance; ‘yes, CorelDraw’! No I’m not going to go into some tirade about how much better Corel is etc. - as it has its own strengths and weaknesses, too […but without the hourly crashes] – so to be honest, we figure the time increase in some projects due to using Corel […time is diminishing with each project’s acquired experience] are negated by the downtime of Fireworks; so far, this is holding true.
This may seem drastic, but it has been a long time coming – that is, implementing a move from our decade invested workflow to a ‘somewhat’ new schema, but due to the disappointing aforementioned, eventually principal / expenditure comparisons / sanity / lack of support all culminate to such, and if there’s no support for the competition, well – then there is ‘no’ competition; a luxury Adobe has taken for granted way too long.
I truly hope Adobe turns around and fixes their ways, until then – we’ll be supporting those that do – and hopefully along the way, just maybe, with the added funds from disgruntled adobe x-pats – the software will far exceed what I used to love and adore […how I miss macromedia]; honestly, it would be near on impossible to argue which suite was better ‘either way’ – so it may not be such a distant future. Besides, with the market-door Adobe is opening due to such poor software, the new player sniffing around the edges will be welcomed by many with open arms; I know my/our allegiance will go straight to the company with the greatest software stability and sound support, whomever that maybe.
So here’s to hoping no more, and actually doing! Very sad...

I am also getting this error message. It happens randomly. Adobe help told me to close and reopen FW and then it stopped happening. Does this sound like a good solution to anyone?

Internal error: SHA-1 not available

Similar Messages

Maybe you are looking for