Internal error trying to create a VM

I'm unable to create a VM in Azure, and I just get this message. Is there anything I can do to find out more? I'm totally stuck. Azure status looks good so I have nothing to go on. Thanks.
The server encountered an internal error. Please retry the request. The long running operation tracking ID was: a817554bf7af76488bc4c7dddd50d852.

Hi,
Which region did you select when creating the VM? Can you create VMs in other region?
Based on my experience, sometimes, after getting the error "The server encountered an internal error. Please retry the request", you can wait for a while, then you can create a VM succussfully.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • CORE4005: Internal error: unable to create JVM

    Hi,
    Can't start-up the domain domain1 after I've installed AppServ 7.0 for W2000. This is the installation log and the admin-server instance log file with the debug set to FINEST.
    Install log :
    INFO - Start core server configuration.
    INFO - Domain successfully created
    INFO - Server instance successfully created
    WARNING - SNMP subagent installation did not succeed
    INFO - End core server configuration.
    INFO - Start samples configuration.
    INFO - End samples configuration.
    INFO - Start Sun ONE Messaging Queue configuration
    INFO - End Sun ONE Messaging Queue configuration
    INFO - Start PointBase configuration
    INFO - End PointBase configuration
    and admin-server instance log file :
    [29/Sep/2003:17:17:04] INFO ( 1504): CORE1116: Sun ONE Application Server 7.0.0_01
    [29/Sep/2003:17:17:10] FINE ( 1504): HTTP5169: User authentication cache entries expire in 120 seconds.
    [29/Sep/2003:17:17:10] FINE ( 1504): HTTP5170: User authentication cache holds 200 users
    [29/Sep/2003:17:17:10] FINE ( 1504): HTTP5171: Up to 4 groups are cached for each cached user.
    [29/Sep/2003:17:17:10] FINE ( 1504): HTTP4207: file cache module initialized (API versions 1 through 1)
    [29/Sep/2003:17:17:10] FINE ( 1504): HTTP4302: file cache has been initialized
    [29/Sep/2003:17:17:10] FINE ( 1504): HTTP3063: KeepAliveTimeout is 30 seconds (default value)
    [29/Sep/2003:17:17:10] FINE ( 1504): HTTP3067: PostThreadsEarly set to off
    [29/Sep/2003:17:17:10] FINE ( 1504): HTTP3066: MaxKeepAliveConnections set to 256
    [29/Sep/2003:17:17:11] FINE ( 1504): Installed configuration 1
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm stickyAttach: 1
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -DJAVA_HOME=D:/Sun/AppServer7/jdk
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.installRoot=D:/Sun/AppServer7
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.instanceRoot=D:\Sun\AppServer7\domains\domain1
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Duser.language=fr
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Duser.country=FR
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: exit
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: vfprintf
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dorg.xml.sax.driver=org.apache.crimson.parser.XMLReaderImpl
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.security.policy=D:/Sun/AppServer7/domains/domain1/admin-server/config/server.policy
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.security.auth.login.config=D:/Sun/AppServer7/domains/domain1/admin-server/config/login.conf
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.jdo.api.persistence.model.multipleClassLoaders=reload
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.configRoot=D:/Sun/AppServer7\config
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.perlRoot=D:\Sun\AppServer7\lib\perl
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.imqLib=D:\Sun\AppServer7\imq\lib
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.imqBin=D:\Sun\AppServer7\imq\bin
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.webServicesLib=D:\Sun\AppServer7\share\lib
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.icuLib=D:\Sun\AppServer7\bin
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.defaultLocale=fr_FR
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.verifier.xsl=D:/Sun/AppServer7/lib/verifier
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Xmx128m
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dsun.rmi.dgc.server.gcInterval=3600000
    [29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.class.path=D:/Sun/AppServer7/lib/appserv-rt.jar;D:/Sun/AppServer7/jdk/lib/tools.jar;D:/Sun/AppServer7/lib/appserv-ext.jar;D:/Sun/AppServer7/lib/appserv-cmp.jar;D:\Sun\AppServer7\imq\lib/imq.jar;D:\Sun\AppServer7\imq\lib/imqadmin.jar;D:\Sun\AppServer7\imq\lib/imqutil.jar;D:/Sun/AppServer7/lib/appserv-admin.jar;D:/Sun/AppServer7/lib/appserv-ideplugin.jar;
    [29/Sep/2003:17:17:11] FATAL ( 1504): CORE4005: Internal error: unable to create JVM
    [29/Sep/2003:17:17:11] SEVERE ( 1504): CORE4009: Failed to load JVM (check your JRE)
    [29/Sep/2003:17:17:11] SEVERE ( 1504): CORE3187: Late initialization failed: Error running init function(late) init-j2ee: unknown error
    if anyone could help, I would apreciate
    Thanks to all

    Ok. I've managed to solve my problem. Thanks to everybody.
    For anyone who is interested in here is the solution that fixed the error for me :
    Because I had before installed JVM version 1.4.2 and then I uninstalled it and put the version 1.4.1_01, as the one that App Server 7.0 is using, the uninstaller has left a newer version of jvm.dll in WINNT/System32
    After I've renamed this file to _jvm.dll (for example), just to get rid of it, the domain and his instances have started correctly.
    Good luck!

  • Error trying to create https connection from Web Dynpro

    Hi experts!!
    I am trying to create a WD view with an actionButton and a form template, when the user fills the data in the form and presses the button, i want to create an Https connect and post some parameters to the URL.
    HttpsURLConnection cannot be resolved,
    com.sun.net.ssl.internal.ssl.Provider() does't not exist in the package com.sun.net.ssl.internal.ssl.Provider()
    do i need to add any jars?? I've already added the jsse.jar
    The code i use is the following.
    private void sendHttp(){
          String response = "";
          HttpsURLConnection connection = null;
          try {
                      System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
                      java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
                      URL url = new URL(<your_url>);
                      connection = (HttpsURLConnection) url.openConnection();
                      connection.setDoInput(true);
                      connection.setDoOutput(true);
                      connection.setAllowUserInteraction(true);
                      connection.setUseCaches(false);
                }     catch(Exception e) {
                      response = response +  "Error in getting connection: " ;
                      response = response +  e ;
                if (connection != null){
                      try {
                            connection.setRequestMethod("POST");
                            connection.setFollowRedirects(true);
                            //build all the parameters into 1 string
                            String query = "parameter1name=" + URLEncoder.encode(parameter1value);
                                  query += "&";
                                  query += "parameter2name=" + URLEncoder.encode(parameter2value);
                            connection.setRequestProperty("Content-length",String.valueOf (query.length()));
                            connection.setRequestProperty("Content-Type","application/x-www- form-urlencoded");
                            connection.setRequestProperty("User-Agent", "Mozilla/4.0 (compatible; MSIE 5.0; Windows 98; DigExt)");
                            // open up the output stream of the connection
                            DataOutputStream output = new DataOutputStream( connection.getOutputStream() );
                            // write out the data
                            int queryLength = query.length();
                            output.writeBytes( query );
                            output.close();
                            //if responsecode <> 200 you should stop: should always be 200
                            String responsecode = connection.getResponseCode();
                            if (responsecode.equalsIgnoreCase("200")){
                                  String inputLine;
                                  StringBuffer input = new StringBuffer();
                                  BufferedReader in =     new BufferedReader(     new InputStreamReader(connection.getInputStream()));
                                                                                    //Get site response
                                  while ((inputLine = in.readLine()) != null) {
                                        input.append(inputLine);
                                  in.close();
                                  response = response + input.toString();
                      }     catch(Exception e) {
                          response = response +  "Error in using connection: " ;
                          response = response +  e ;
              wdContext.currentContextElement().setResponse(response);

    Hai ,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/526bd490-0201-0010-038e-d3ff7eb1d16e
    please check above link .
    application server u have take load balancing click on next  there u take click on radio button of Msg server .
    Regards ,
    venkat

  • Internal Error -5000 when creating AP Credit Memo

    hi all, i've some problem when trying to create AP Credit Memo  using VB.Net via SAP B1 SDK.
    My application keep throwing error "Internal Error -5000 Occured"
    My friend suggest me to create AP Credit Memo using SAP B1 application first, then try using the same parameter that i inputed into the system to create AP Credit Memo using SDK, he said it ussualy works.
    I already try my friend suggestion to create AP Memo using SAP B1 Screen and it
    was worked.
    The information that i input when creating AP Memo via SAP screen are :
    - Vendor
    - Item/Service Type ="Service"
    - Item/Service Description
    - G/L Account
    - Tax Code ="VNC"
    - WTaxLiable =No
    But when I try to create AP Memo using VB.NET using SAP SDK, it still
    throwing the same exception as before (Internal Error -5000 Occured) even
    I passing the same parameter.
    Bellow is my code :
    For the master :
                            vAPmemo.DocObjectCode =
    SAPbobsCOM.BoObjectTypes.oPurchaseCreditNotes
                            vAPmemo.DocType =
    SAPbobsCOM.BoDocumentTypes.dDocument_Service
                            vAPmemo.CardCode = "V001" ' txtCcode.Text
                            vAPmemo.DocDate = Now 'DatePosting.Value
                            vAPmemo.DocDueDate = Now ' DateDue.Value
                            vAPmemo.DocCurrency = "IDR"
                            vAPmemo.Comments = "Based On Tagihan  No. " &
    dtTable.Rows(j)("JurnalMemo").ToString.Trim & "."
    For The Detail :
                       vAPmemo.Lines.AccountCode =
    dtTable.Rows(j)("AccountCode").ToString.Trim
                            vAPmemo.Lines.BaseType = 18 'basetype = 19 (a/p
    credit memo)
                            vAPmemo.Lines.ItemDescription = "Test"
                            vAPmemo.Lines.WTLiable = SAPbobsCOM.BoYesNoEnum.tNO
                            vAPmemo.Lines.TaxCode = "VNC"
    vAPmemo.RowTotalFC= CDbl(dtTable.Rows(j)("Credit").ToString.Trim)
    Is there anything wrong in my code ?
    or missing parameter?
    Regards,
    Herfin
    Edited by: Herfin Jodana on Aug 28, 2008 3:29 AM
    Edited by: Herfin Jodana on Aug 28, 2008 3:30 AM

    HI,
    if you want ot create a A/P Credit memo, you do not have to give the basetype/BaseLine/BaseEntry fields between document lines.
    the correct is:
    vAPmemo.Lines.AccountCode =
    dtTable.Rows(j)("AccountCode").ToString.Trim
    vAPmemo.Lines.ItemDescription = "Test"
    vAPmemo.Lines.WTLiable = SAPbobsCOM.BoYesNoEnum.tNO
    vAPmemo.Lines.TaxCode = "VNC"
    vAPmemo.RowTotalFC= CDbl(dtTable.Rows(j)("Credit").ToString.Trim)
    if you want to create a A/P Credit memo based on Existing Invoice, you must have to provide the basetype/BaseLine/BaseEntry  which means:
    vAPmemo.Lines.BaseType = 18 'APInvoice
    vAPmemo.Lines.BaseEntry = 'Refrence docentry for A/P Invoice
    vAPmemo.Lines.BaseLine = 'reference to A/P Invoice linenumber
    Try this, it is now working.
    Best Regards,
    J.

  • Error trying to create a Power View report against a Multi Dimensional SSAS cube

    Hi all,
    We have installed the Power View For Multidimensional Models CTP, released last November 27 on our Analysis Server instances.  I am now trying to create a Power View report in SharePoint that is connected to a Multi-Dimensional cube.
    I have followed the instructions diligently:
    1. Install the CTP
    2. Created a data connection of type "Microsoft BI Semantic Model for Power View" (see attachment #1)
    3. Tested that the connection was valid (all is good here!)
    I then select the "Create Power View Report" option from the data connection that I created above.
    The Power View GUI appears, and then throws an error:
    Error text:
    "An error occurred while loading the model for the item or data source 'http://server/site/SalesVarianceAnalysis_MDX.rsds'. Verify that the connection information is correct and that you have permissions to access the data source."
    The details of the error are:
    <detail><ErrorCode xmlns="rsCannotRetrieveModel</ErrorCode><HttpStatus">http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus
    xmlns="400</HttpStatus><Message">http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="An">http://www.microsoft.com/sql/reportingservices">An
    error occurred while loading the model for the item or data source 'http://hubtest/sites/broadcasting/thewowzone/Data Connections/SalesVarianceAnalysis_MDX.rsds'. Verify that the connection information is correct and that you have permissions to access the
    data source.</Message><HelpLink xmlns="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName">http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0</HelpLink><ProductName
    xmlns="Microsoft">http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="11.0.3000.0</ProductVersion><ProductLocaleId">http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
    xmlns="127</ProductLocaleId><OperatingSystem">http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="OsIndependent</OperatingSystem><CountryLocaleId">http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
    xmlns="1033</CountryLocaleId><MoreInformation">http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="<Source>ReportingServicesLibrary</Source><Message">http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
    msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsCannotRetrieveModel&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3000.0"
    xmlns:msrs="An">http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source '<omitted for security purposes>.
    Verify that the connection information is correct and that you have permissions to access the data source.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate to the report server
    on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    So, I can connect with the connection, but I get an error when connecting with Power View. 
    Any suggestions are appreciated.
    Thanks...
    /Peter
    Peter

    Hi Peter - are you specifying the cube name in the connection string?
    Data Source=[server];Initial Catalog=AdventureWorksDW-MD;Cube='Adventure Works'
    Check out
    http://blogs.msdn.com/b/analysisservices/archive/2012/12/09/power-view-for-multidimensional-models-feature-drill-down.aspx

  • Error trying to create App for SharePoint Online

    I'm trying to create my first app for SharePoint Online using Visual Studio 2012. I believe I have all of the pre-reqs installed/configured. I have created a dev site in our SharePoint Online environment. I am a Site Collection administrator for that site.
    When I open VS2012, and try to create a new app project, it prompts me to connect to my dev site. When I enter the URL for that site, it give me the following login:
    We use ADFS, so when I enter my email address, it redirects me to my organizations federated login:
    Once I login, it takes me to the screen that reads "Error: An error has occurred on the server" with the standard SharePoint correlation id.
    I can't seem to get past this, and it won't let me start the new app project. Any thoughts on how to proceed?
    Thanks in advance,
    cflbasser

    Here is the correlation error screen for reference:
    When I click "go back to site", it takes me here:

  • Internal Error trying to open a remote panel in netscape 7.1 in linux

    /usr/local/netscape/netscape
    Internal Error : "fontmgr.cpp", line 1023
    LabVIEW version 7.0
    For assistance in resolving this problem, please exit and relaunch LabVIEW, or contact National Instruments.
    I got this error when I was trying to open a remote panel from a machine running windows 2000 to a machine with netscape 7.1 browser under linux redhat 7.3
    I have made a link in /usr/local/netscape/plugins LV7NPlugin.so -> /usr/local/lib/LabVIEW-7.0/LV7NPlugin.so
    I have also copied the file in /usr/local/netscape/plugins but it doesn't work.

    Here the official statement from NI
    The crash happens when LabVIEW can't open the catch-all font of "fixed" as a fallback when a particular font is not available on the system. The "fixed" font is ALWAYS supposed to be available on the system. The "fixed" font is provided by a font alias in the file /usr/X11R6/lib/X11/fonts/misc/fonts.alias. The alias should be defined in the first few lines of this text file. On a SuSE system where the crash is occurring, do an 'xlsfonts | grep fixed' . In a correct configuration, you should see a font called simply "fixed" in the output, but if not, this will cause the LV crash. I have not actually been able to reproduce the problem here without intentionally deleting this alias, because "fixed" is available on our SuSE syste
    m with the XFree86 packages from SuSE 8.2 installed. It's possible that this problem has already been corrected by SuSE, and the packages on their FTP site have been updated from the original CD release. Workaround: Download XFree86-4.0.3-19.i386.rpm or later from ftp.suse.com (or a mirror; ftp.mcs.anl.gov is a really fast one in the USA) and upgrade your X server. Verify that "xlsfonts | grep fixed" reports that the font is available. LabVIEW should then display an ugly fixed-width font for the missing font(s), but not crash.

  • Internal error trying to install software

    Hi, my macbook pro 2009 edition has problem trying to install a printing software.
    When the installer is opened, it shows an internal error when proceeding from the terms and conditions page.
    Exception Name: NSInvalidArgumentException
    Description: *** -[__NSPlaceholderDictionary initWithObjects:forKeys:count:]: attempt to insert nil object from objects[0]
    User Info: (null)
    0   CoreFoundation                      0x00007fff8835e41c __exceptionPreprocess + 172
    1   libobjc.A.dylib                     0x00007fff858ebe75 objc_exception_throw + 43
    2   CoreFoundation                      0x00007fff8825e1d1 -[__NSPlaceholderDictionary initWithObjects:forKeys:count:] + 385
    3   CoreFoundation                      0x00007fff88273ed9 +[NSDictionary dictionaryWithObjects:forKeys:count:] + 57
    4   Installer                           0x000000010c531ba0 Installer + 101280
    5   Installer                           0x000000010c531663 Installer + 99939
    6   Installer                           0x000000010c532397 Installer + 103319
    7   Installer                           0x000000010c52b3fc Installer + 74748
    8   InstallerPlugins                    0x000000010c5dd15c -[InstallerPane gotoNextPane] + 46
    9   Installer                           0x000000010c51c986 Installer + 14726
    10  AppKit                              0x00007fff9084f8c2 -[NSWindow endSheet:returnCode:] + 368
    11  AppKit                              0x00007fff907143d0 -[NSApplication sendAction:to:from:] + 327
    12  AppKit                              0x00007fff9071424e -[NSControl sendAction:to:] + 86
    13  AppKit                              0x00007fff90760d7d -[NSCell _sendActionFrom:] + 128
    14  AppKit                              0x00007fff9077a715 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 2316
    15  AppKit                              0x00007fff90779ae7 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 487
    16  AppKit                              0x00007fff907791fd -[NSControl mouseDown:] + 706
    17  AppKit                              0x00007fff906fad08 -[NSWindow sendEvent:] + 11296
    18  AppKit                              0x00007fff90699744 -[NSApplication sendEvent:] + 2021
    19  AppKit                              0x00007fff904e9a29 -[NSApplication run] + 646
    20  AppKit                              0x00007fff904d4803 NSApplicationMain + 940
    21  Installer                           0x000000010c51b254 Installer + 8788
    22  libdyld.dylib                       0x00007fff847b15fd start + 1
    23  ???                                 0x0000000000000001 0x0 + 1
    Not a genius at this, so any help will be much appreciated. Thank you!

    What software are you trying to install? Samsung and Dell both had this issue, but I think they have updated their installers. Can you provide a link of where you downloaded this?

  • Error trying to create first database with Database Studio on MaxDB 7.7

    After installing the Database Studio 7.7 and starting up, i tried to create a first (local) database following the procedure documented in the online manual:
    Under the heading of "Servers" an entry "<Local>" was created.
    Then  i used the right mouse button to "Create Database...".
    A popup window appears with:
    Database Server <Local>
    Database Name MAXDB
    Login Information for Server (user/password) grayed out.
    Then doing "Next >" generates the following error:
    No installation available on server '<Local>'.
    Remark: installation went without problems.
    Any help is appreciated greatly.

    Hi Simon,
    a silly question just to clarify the issue: Do you have a MaxDB Installation on your PC where Database Studio was installed?
    What does the Event Log tell you about the issue?
    See Window->Show View->Event Log Viewer
    or if not listed there
    Window->Show View->Other ...->Database Studio->Event Log Viewer
    Could you please have a look and tell me what it says? If you find a message that is related to your problem double click it and press the little Copy to clipboard icon in the upper right corner then you can paste the message in your reply.
    Cheers,
    Daniel

  • Error trying to create transport in netweaver developer

    Im trying to creat a transport in netweaver developer but i got the message: Predecessor activities have been detected wich are assigned to failed change requests. Please handle these failures first before releasing again.
    I searched on CBS, for collision, dirty dcs, broken dcs and everything is fine.
    please help!!!

    Hi Benjamin,
    When trying to check-in the DC, While activating your DC, Click on 'Selected Activity' folder directly and then click on Activate button
    Hope this will help you.
    Thanks
    Arun

  • Error trying to create object of Class IUSer

    I am trying to put in a code that is based on Rle assignment for the user on the portal.
    i am trying to put this code
    IWDClientUser user = WDClientUser.getCurrentUser();
    IUser userID = user.getSAPUser();
    String Userrole=new String();
    for (Iterator iter = userID.getRoles(true); iter.hasNext();) {
    IRole role = UMFactory.getRoleFactory().getRole((String) iter.next());
    Userrole=role.getUniqueName();
    But there is an error in line IUser userID = user.getSAPUser();.
    when i say add imports it is not adding the packages required to cretae an object of this class.
    When i try to manually import
    com.sap.security.api.sda
    but am not able to.. any ideas how to acheive this and assist me if i am doing anything worng?
    regards
    Sam

    Austin,
    Sorry for asking the basic questions.This is what i am doing. I went to DC, right clicked on it and selected properties. Then select JAva build path opition and then select Libraries. There i click on Add External JARs and select com.sap.security.api.jar.
    and click ok.
    do i need to do anything else here.
    And when ever i come back after a while i see that the external
    Jar is missing. IT looks weird. I have to keep on importing the external JAr after every few operations.
    Not sure what the problem could be
    thanks a lto for your patience in helping me ou ton this issue
    Below is the erro rmessage i get when trying to activate
    Build number assigned: 165853
    Change request state from QUEUED to PROCESSING
    ACTIVATION request in Build Space "DJI_EMXSSTR_D" at Node ID: 37,961,750
         [id: 165,817; parentID: 0; type: 4]
         [options: FORCE ACTIVATE PREDECESSORS]
    REQUEST PROCESSING started at 2007-04-17 22:13:46.500 GMT
    ===== Pre-Processing =====
    Waiting 19 ms
    List of activities to be activated:
         1 activity in compartment "sap.com_SAP_ESS_1"
              ESS_lea_1005
                   [seq. no 272][created by RJOGAM at 2007-04-17 18:14:26.0][ID 06c9c16aed2511dbafd000306e5ddf50]
    Analyse dependencies to predecessor activities... started at 2007-04-17 22:13:47.253 GMT
    Analysing predecessors in compartment "sap.com_SAP_ESS_1"
         The following predecessor has to be added to request 165817:
              "XSS_lea_selectionlistview_1003"   [seq. no 271][created by RJOGAM at 4/17/07 1:34 PM][ID 53225486ec4c11db812200306e5ddf50]
    Analyse dependencies to predecessor activities... finished at 2007-04-17 22:13:47.434 GMT and took 181 ms
    Analyse activities... started at 2007-04-17 22:13:47.434 GMT
    Development line state verification started at 2007-04-17 22:13:47.509 GMT
    Verification of the development line [ws/EMXSSTR/sap.com_SAP_ESS/dev/active/] SUCCEEDED
    Development line state verification finished at 2007-04-17 22:13:47.540 GMT and took 31 ms
    Cache verification, level 2 (Comparison of attributes) started at 2007-04-17 22:13:47.540 GMT
    Verification of the following object:
         [DC: sap.com/ess/lea, group: 0] SUCCEEDED
    Cache verification finished at 2007-04-17 22:13:47.617 GMT and took 77 ms
    Analyse dependencies to predecessor activities... finished at 2007-04-17 22:13:47.629 GMT and took 144 ms
              SKIP  : Development Component "sap.com/ess/lea"
         1 component to be build in compartment "sap.com_SAP_ESS_1"
    Analyse activities... finished at 2007-04-17 22:13:47.680 GMT and took 246 ms
    Calculate all combinations of components and variants to be built...
         "sap.com/ess/lea" variant "default"
    Prepare build environment in the file system... started at 2007-04-17 22:13:47.852 GMT
         Synchronize development configuration... finished at 2007-04-17 22:13:47.862 GMT and took 10 ms
         Synchronize component definitions... finished at 2007-04-17 22:13:47.883 GMT and took 20 ms
         Synchronize sources...
    Development line state verification started at 2007-04-17 22:13:47.970 GMT
    Verification of the development line [ws/EMXSSTR/sap.com_SAP_ESS/dev/active/] SUCCEEDED
    Development line state verification finished at 2007-04-17 22:13:48.011 GMT and took 41 ms
    Cache verification, level 2 (Comparison of attributes) started at 2007-04-17 22:13:48.011 GMT
    Verification of the following object:
         [DC: sap.com/ess/lea, group: 1] FAILED
    Comparison of cache items on the paths:
         [/usr/sap/DJI/JC03/j2ee/cluster/server0/temp/CBS/33/.CACHE/1195/DCs/sap.com/ess/lea/_comp/src/packages/com/sap/xss/hr/lea/selectionlist/SelectionListView.wdcontroller]
         [ws/EMXSSTR/sap.com_SAP_ESS/dev/active/DCs/sap.com/ess/lea/_comp/src/packages/com/sap/xss/hr/lea/selectionlist/SelectionListView.wdcontroller]
    on verification level 2 FAILED due to the following reason:
    Difference in attribute 'Timestamp' [Thu Mar 01 16:49:43 EST 2007][Thu Mar 01 16:49:44 EST 2007]
    Comparison of cache items on the paths:
         [/usr/sap/DJI/JC03/j2ee/cluster/server0/temp/CBS/33/.CACHE/1195/DCs/sap.com/ess/lea/_comp/src/packages/com/sap/xss/hr/lea/selectionlist/SelectionListView.wdcontroller.xlf]
         [ws/EMXSSTR/sap.com_SAP_ESS/dev/active/DCs/sap.com/ess/lea/_comp/src/packages/com/sap/xss/hr/lea/selectionlist/SelectionListView.wdcontroller.xlf]
    on verification level 2 FAILED due to the following reason:
    Difference in attribute 'Timestamp' [Thu Mar 01 16:49:43 EST 2007][Thu Mar 01 16:49:44 EST 2007]
    Comparison of cache items on the paths:
         [/usr/sap/DJI/JC03/j2ee/cluster/server0/temp/CBS/33/.CACHE/1195/DCs/sap.com/ess/lea/_comp/src/packages/com/sap/xss/hr/lea/selectionlist/SelectionListView.wdview]
         [ws/EMXSSTR/sap.com_SAP_ESS/dev/active/DCs/sap.com/ess/lea/_comp/src/packages/com/sap/xss/hr/lea/selectionlist/SelectionListView.wdview]
    on verification level 2 FAILED due to the following reason:
    Difference in attribute 'Timestamp' [Thu Mar 01 16:49:43 EST 2007][Thu Mar 01 16:49:44 EST 2007]
    Comparison of cache items on the paths:
         [/usr/sap/DJI/JC03/j2ee/cluster/server0/temp/CBS/33/.CACHE/1195/DCs/sap.com/ess/lea/_comp/src/packages/com/sap/xss/hr/lea/selectionlist/SelectionListView.wdview.xlf]
         [ws/EMXSSTR/sap.com_SAP_ESS/dev/active/DCs/sap.com/ess/lea/_comp/src/packages/com/sap/xss/hr/lea/selectionlist/SelectionListView.wdview.xlf]
    on verification level 2 FAILED due to the following reason:
    Difference in attribute 'Timestamp' [Thu Mar 01 16:49:43 EST 2007][Thu Mar 01 16:49:44 EST 2007]
    Cache verification finished at 2007-04-17 22:13:54.824 GMT and took 6 s 813 ms
         Synchronize sources... finished at 2007-04-17 22:14:02.175 GMT and took 14 s 292 ms
         Synchronize used libraries...
              public part "default" of component "sap.com/tc/col/api" ... OK
                   [PP "default" of DC 226 variant "default"][SC 1196][last successful build: 162348]
              public part "default" of component "sap.com/tc/cmi" ... OK
                   [PP "default" of DC 217 variant "default"][SC 1196][last successful build: 164158]
              public part "default" of component "sap.com/tc/ddic/ddicruntime" ... OK
                   [PP "default" of DC 218 variant "default"][SC 1196][last successful build: 164158]
              public part "default" of component "sap.com/tc/wd/webdynpro" ... OK
                   [PP "default" of DC 196 variant "default"][SC 1192][last successful build: 162348]
              public part "default" of component "sap.com/tc/logging" ... OK
                   [PP "default" of DC 184 variant "default"][SC 1192][last successful build: 162348]
              public part "default" of component "sap.com/com.sap.aii.proxy.framework" ... OK
                   [PP "default" of DC 221 variant "default"][SC 1196][last successful build: 164158]
              public part "default" of component "sap.com/com.sap.aii.util.misc" ... OK
                   [PP "default" of DC 222 variant "default"][SC 1196][last successful build: 162348]
              public part "default" of component "sap.com/com.sap.mw.jco" ... OK
                   [PP "default" of DC 126 variant "default"][SC 1192][last successful build: 162348]
              public part "FloorplanManager" of component "sap.com/pcui_gp/xssfpm" ... OK
                   [PP "FloorplanManager" of DC 223 variant "default"][SC 1193][last successful build: 162556]
              public part "FloorplanManager" of component "sap.com/pcui_gp/xssfpm" ... OK
                   [PP "FloorplanManager" of DC 223 variant "default"][SC 1193][last successful build: 162556]
              public part "FloorplanManager" of component "sap.com/pcui_gp/xssfpm" ... OK
                   [PP "FloorplanManager" of DC 223 variant "default"][SC 1193][last successful build: 162556]
              public part "FloorplanManager" of component "sap.com/pcui_gp/xssfpm" ... OK
                   [PP "FloorplanManager" of DC 223 variant "default"][SC 1193][last successful build: 162556]
              public part "FPMUtils" of component "sap.com/pcui_gp/xssutils" ... OK
                   [PP "FPMUtils" of DC 224 variant "default"][SC 1193][last successful build: 162556]
              public part "FPMUtils" of component "sap.com/pcui_gp/xssutils" ... OK
                   [PP "FPMUtils" of DC 224 variant "default"][SC 1193][last successful build: 162556]
              public part "FPMUtils" of component "sap.com/pcui_gp/xssutils" ... OK
                   [PP "FPMUtils" of DC 224 variant "default"][SC 1193][last successful build: 162556]
              public part "FPMUtils" of component "sap.com/pcui_gp/xssutils" ... OK
                   [PP "FPMUtils" of DC 224 variant "default"][SC 1193][last successful build: 162556]
              public part "default" of component "sap.com/tc/ddic/metamodel/content" ... OK
                   [PP "default" of DC 219 variant "default"][SC 1196][last successful build: 162348]
              public part "default" of component "sap.com/tc/wdp/metamodel/content" ... OK
                   [PP "default" of DC 220 variant "default"][SC 1196][last successful build: 162348]
              public part "default" of component "sap.com/com.sap.exception" ... OK
                   [PP "default" of DC 123 variant "default"][SC 1192][last successful build: 162348]
              public part "default" of component "sap.com/com.sap.exception" ... OK
                   [PP "default" of DC 123 variant "default"][SC 1192][last successful build: 162348]
              public part "FcTmDataExchange" of component "sap.com/pcui_gp/tecl" ... OK
                   [PP "FcTmDataExchange" of DC 230 variant "default"][SC 1193][last successful build: 162556]
              public part "FcTmDataExchange" of component "sap.com/pcui_gp/tecl" ... OK
                   [PP "FcTmDataExchange" of DC 230 variant "default"][SC 1193][last successful build: 162556]
              public part "FcTmDataExchange" of component "sap.com/pcui_gp/tecl" ... OK
                   [PP "FcTmDataExchange" of DC 230 variant "default"][SC 1193][last successful build: 162556]
         Synchronize used libraries... finished at 2007-04-17 22:14:06.635 GMT and took 4 s 459 ms
    The source cache is in INCONSISTENT state for at least one of the request DCs. The build might produce incorrect results.
    Prepare build environment in the file system... finished at 2007-04-17 22:14:06.635 GMT and took 18 s 783 ms
    ===== Pre-Processing =====  finished at 2007-04-17 22:14:06.636 GMT and took 20 s 117 ms
    Waiting 33 ms
    ===== Processing =====
    BUILD DCs
         "sap.com/ess/lea" in variant "default"
              .. FAILURE: The build failed due to compilation errors. See build log for details. [result code: 202]
    ===== Processing =====  finished at 2007-04-17 22:16:01.800 GMT and took 1 m 55 s 131 ms
    ===== Post-Processing =====
    Waiting 12 ms
    Check whether build was successful for all required variants...
         "sap.com/ess/lea" in variant "default"   FAILED
    ===== Post-Processing =====  finished at 2007-04-17 22:16:01.815 GMT and took 3 ms
    Change request state from PROCESSING to FAILED
    ERROR! The following problem(s) occurred  during request processing:
    ERROR! The following error occurred during request processing:Activation FAILED due to build problems. See build logs for details.
    REQUEST PROCESSING finished at 2007-04-17 22:16:01.824 GMT and took 2 m 15 s 324 ms
    sam
    Message was edited by:
            sameer chilama
    Message was edited by:
            sameer chilama

  • Error Trying to Create Capture Media Error 80004005

    Hey everyone need some help here.  I was at TechEd last week, in which I did the hands-on-lab on using boot media to capture a reference PC, can't remember the name.  Anyway, here is my problem, I tried to do the exact same set up on our setup
    and it fails.  I go through the following process:
    1.  Create Task Sequence Media
    2.  Select Capture Media
    3.  Select CD/DVD Set
    4.  Give it a name
    5.  Point to my boot image, and select my distribution point. and then
    IT FAILS!
    Media creation failed with error message: 'Unspecified error'
    Refer to CreateTsMedia.log file to find more details.
    When I look through the log file, the last item I see is:
    <![LOG[CreateMedia.exe finished with error code 80004005]LOG]!><time="14:26:31.972+240" date="05-19-2014" component="CreateTsMedia" context="" type="2" thread="5548" file="createmedia.cpp:1123">
    The info that I find seems to point to this being a problem with a USB drive not big enough to support the boot wim, but I am creating and ISO.. so whats the deal?
    Let me know what else I need to add to help me out.

    <![LOG[ ===============================================================]LOG]!><time="14:26:18.667+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548"
    file="createmedia.cpp:979">
    <![LOG[Begin media creation: ]LOG]!><time="14:26:18.669+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:980">
    <![LOG[Media: capture]LOG]!><time="14:26:18.671+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:267">
    <![LOG['Provider'=SERVER.REMOVE.FOR.SECURITY]LOG]!><time="14:26:18.671+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:208">
    <![LOG['Site Code'=PS1]LOG]!><time="14:26:18.671+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:208">
    <![LOG['Distribution Points(s)'=SERVER.REMOVE.FOR.SECURITY]LOG]!><time="14:26:18.671+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:208">
    <![LOG['Boot Image Package ID'=PS100015]LOG]!><time="14:26:18.671+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:208">
    <![LOG['Physical Media Type'=CD]LOG]!><time="14:26:18.671+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:208">
    <![LOG['Media Destination'=K:\boot.iso]LOG]!><time="14:26:18.671+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:208">
    <![LOG[Media label: 'Configuration Manager 2012']LOG]!><time="14:26:18.671+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:1025">
    <![LOG[Creating media from Admin Console]LOG]!><time="14:26:18.671+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:1029">
    <![LOG[COMMAND LINE: ]LOG]!><time="14:26:18.671+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:929">
    <![LOG[CreateMedia.exe /K:capture /N:**** /P:SERVER.REMOVE.FOR.SECURITY /S:PS1 /C:**** /D:SERVER.REMOVE.FOR.SECURITY /L:Configuration Manager 2012 /B:PS100015 /T:CD /F:K:\boot.iso ]LOG]!><time="14:26:18.671+240" date="05-19-2014"
    component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:930">
    <![LOG[Another thread has been started to create TS media]LOG]!><time="14:26:18.672+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="createmedia.cpp:589">
    <![LOG[======= CreateCaptureMedia invoked =======]LOG]!><time="14:26:18.672+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="createtsmedia.cpp:1207">
    <![LOG[---------------------------- CreateTsMedia ----------------------------]LOG]!><time="14:26:18.672+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204"
    file="createtsmedia.cpp:245">
    <![LOG[Requested output path: K:\boot.iso (CD)]LOG]!><time="14:26:18.672+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="createtsmedia.cpp:267">
    <![LOG[Total number of TS variables: 0]LOG]!><time="14:26:18.672+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="createtsmedia.cpp:106">
    <![LOG[Temporary directory 'C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204' created, free space on drive 'C:' is 67565 MB]LOG]!><time="14:26:18.673+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="tempdirectory.cpp:87">
    <![LOG[Opened WMI namespace '\\SERVER.REMOVE.FOR.SECURITY\root\SMS\site_PS1' ]LOG]!><time="14:26:18.715+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204"
    file="mediafactory.cpp:924">
    <![LOG[Local computer is COMPUTER]LOG]!><time="14:26:18.729+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="utils.cpp:384">
    <![LOG[Package manager created successfully]LOG]!><time="14:26:18.729+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="mediafactory.cpp:408">
    <![LOG[Local computer is Computer]LOG]!><time="14:26:18.731+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="utils.cpp:384">
    <![LOG[Creating policy manager]LOG]!><time="14:26:18.731+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="mediafactory.cpp:444">
    <![LOG[Setting up Install Toolkit]LOG]!><time="14:26:18.731+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="mediatoolkit.cpp:214">
    <![LOG[Copying package PS100015 to C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Cache]LOG]!><time="14:26:18.827+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204"
    file="packagemgr.cpp:334">
    <![LOG[Retrieving info for package PS100015.119]LOG]!><time="14:26:18.827+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="packagemgr.cpp:1042">
    <![LOG[Content library is on remote system 'SERVER.REMOVE.FOR.SECURITY']LOG]!><time="14:26:19.569+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="utils.cpp:617">
    <![LOG[Connected to remote registry service on 'SERVER.REMOVE.FOR.SECURITY']LOG]!><time="14:26:19.588+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204"
    file="utils.cpp:691">
    <![LOG[Content Library: Local Path='E:\SCCMContentLib', Remote Path='\\SERVER.REMOVE.FOR.SECURITY\SCCMContentLib$', File Library Usable Drives='E:\,E:\,D:\,C:\']LOG]!><time="14:26:19.592+240" date="05-19-2014" component="CreateTsMedia"
    context="" type="1" thread="4204" file="utils.cpp:830">
    <![LOG[Registering package PS100015.119 with content at \\SERVER.REMOVE.FOR.SECURITY\SCCMContentLib$]LOG]!><time="14:26:19.937+240" date="05-19-2014" component="CreateTsMedia" context="" type="1"
    thread="4204" file="packagemgr.cpp:591">
    <![LOG[VerifyContentHash: Hash algorithm is 32780]LOG]!><time="14:26:22.001+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="downloadcontent.cpp:1829">
    <![LOG[Hash value of package PS100015 is verified]LOG]!><time="14:26:25.372+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="packagemgr.cpp:494">
    <![LOG[ADK installation root registry value not found.]LOG]!><time="14:26:25.373+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="wimfile.cpp:197">
    <![LOG[Loaded C:\windows\system32\wimgapi.dll]LOG]!><time="14:26:25.373+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="wimfile.cpp:334">
    <![LOG[Opening image file C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Cache\PS100015\boot.PS100015.wim]LOG]!><time="14:26:25.373+240" date="05-19-2014" component="CreateTsMedia" context="" type="1"
    thread="4204" file="wimfile.cpp:412">
    <![LOG[Applying image 1 to volume C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit]LOG]!><time="14:26:25.510+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204"
    file="wimfile.cpp:603">
    <![LOG[Closing image file C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Cache\PS100015\boot.PS100015.wim]LOG]!><time="14:26:25.591+240" date="05-19-2014" component="CreateTsMedia" context="" type="1"
    thread="4204" file="wimfile.cpp:448">
    <![LOG[More than one resource file found in the media creation toolkit. Media resources may be in a different language than what was expected]LOG]!><time="14:26:25.593+240" date="05-19-2014" component="CreateTsMedia"
    context="" type="2" thread="4204" file="mediatoolkit.cpp:177">
    <![LOG[Generating capture task sequence]LOG]!><time="14:26:25.613+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="policymgr.cpp:1094">
    <![LOG[Downloading policies for Task Sequence (Capture)]LOG]!><time="14:26:25.618+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="policymgr.cpp:294">
    <![LOG[2 policies downloaded]LOG]!><time="14:26:25.789+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="policymgr.cpp:322">
    <![LOG[Stored policy 1, PolicyID='{4BC44CAD-CDE9-4058-8C83-FB4FEE22FB1D}--6F6BCC28']LOG]!><time="14:26:25.791+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204"
    file="policymgr.cpp:214">
    <![LOG[Stored policy 2, PolicyID='DEP-{4BC44CAD-CDE9-4058-8C83-FB4FEE22FB1D}-PS100015-6F6BCC28']LOG]!><time="14:26:25.793+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204"
    file="policymgr.cpp:214">
    <![LOG[Stored policy assignment 1]LOG]!><time="14:26:25.793+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="policymgr.cpp:254">
    <![LOG[Stored policy assignment 2]LOG]!><time="14:26:25.793+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="policymgr.cpp:254">
    <![LOG[Site server not found for sitecode PS1]LOG]!><time="14:26:25.928+240" date="05-19-2014" component="CreateTsMedia" context="" type="3" thread="4204" file="siteinfo.cpp:109">
    <![LOG[Retrieval of client configuration polices has failed]LOG]!><time="14:26:25.929+240" date="05-19-2014" component="CreateTsMedia" context="" type="3" thread="4204" file="mediafactory.cpp:1030">
    <![LOG[Failed to create media generator (0x80004005)]LOG]!><time="14:26:25.929+240" date="05-19-2014" component="CreateTsMedia" context="" type="3" thread="4204" file="createtsmedia.cpp:342">
    <![LOG[CreateTsMedia failed with error 0x80004005, details='']LOG]!><time="14:26:25.929+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204" file="createtsmedia.cpp:355">
    <![LOG[Unable to delete file C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin\i386\1033\TsRes.dll (0x80070005). Continuing.]LOG]!><time="14:26:25.963+240" date="05-19-2014" component="CreateTsMedia"
    context="" type="1" thread="4204" file="ccmfile.cpp:1056">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin\i386\1033 (0x80070091).  Continuing.]LOG]!><time="14:26:25.963+240" date="05-19-2014" component="CreateTsMedia"
    context="" type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin\i386 (0x80070091).  Continuing.]LOG]!><time="14:26:25.964+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin (0x80070091).  Continuing.]LOG]!><time="14:26:25.965+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms (0x80070091).  Continuing.]LOG]!><time="14:26:25.965+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit (0x80070091).  Continuing.]LOG]!><time="14:26:25.966+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Error deleting files in temp directory (0x80070091). Retrying after delay.]LOG]!><time="14:26:25.966+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204"
    file="tempdirectory.cpp:128">
    <![LOG[Unable to delete file C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin\i386\1033\TsRes.dll (0x80070005). Continuing.]LOG]!><time="14:26:28.967+240" date="05-19-2014" component="CreateTsMedia"
    context="" type="1" thread="4204" file="ccmfile.cpp:1056">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin\i386\1033 (0x80070091).  Continuing.]LOG]!><time="14:26:28.967+240" date="05-19-2014" component="CreateTsMedia"
    context="" type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin\i386 (0x80070091).  Continuing.]LOG]!><time="14:26:28.968+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin (0x80070091).  Continuing.]LOG]!><time="14:26:28.968+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms (0x80070091).  Continuing.]LOG]!><time="14:26:28.968+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit (0x80070091).  Continuing.]LOG]!><time="14:26:28.968+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Error deleting files in temp directory (0x80070091). Retrying after delay.]LOG]!><time="14:26:28.969+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="4204"
    file="tempdirectory.cpp:128">
    <![LOG[Unable to delete file C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin\i386\1033\TsRes.dll (0x80070005). Continuing.]LOG]!><time="14:26:31.970+240" date="05-19-2014" component="CreateTsMedia"
    context="" type="1" thread="4204" file="ccmfile.cpp:1056">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin\i386\1033 (0x80070091).  Continuing.]LOG]!><time="14:26:31.970+240" date="05-19-2014" component="CreateTsMedia"
    context="" type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin\i386 (0x80070091).  Continuing.]LOG]!><time="14:26:31.970+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms\bin (0x80070091).  Continuing.]LOG]!><time="14:26:31.971+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit\sms (0x80070091).  Continuing.]LOG]!><time="14:26:31.971+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete directory C:\Users\ADMIN-~1\AppData\Local\Temp\_tsmedia_4204\Toolkit (0x80070091).  Continuing.]LOG]!><time="14:26:31.971+240" date="05-19-2014" component="CreateTsMedia" context=""
    type="1" thread="4204" file="ccmfile.cpp:1028">
    <![LOG[Unable to delete all files in temp directory. Giving up. (0x80070091)]LOG]!><time="14:26:31.972+240" date="05-19-2014" component="CreateTsMedia" context="" type="3" thread="4204"
    file="tempdirectory.cpp:138">
    <![LOG[Media creation process that was started from Admin Console completed.
    ]LOG]!><time="14:26:31.972+240" date="05-19-2014" component="CreateTsMedia" context="" type="1" thread="5548" file="createmedia.cpp:1065">
    <![LOG[CreateMedia.exe finished with error code 80004005]LOG]!><time="14:26:31.972+240" date="05-19-2014" component="CreateTsMedia" context="" type="2" thread="5548" file="createmedia.cpp:1123">

  • Error Trying to create a planning application 9.3.1.2

    Hi,
    I have a problem when I try to create a new application in Planning.
    I re installed a new server from scratch with the lastest version in Oracle eDelivery (9.3.1.2), using DB2 as database.
    All is working fine (shared service, essbase, eas ...) never got an error, but i'm not able to create a planning application, I have an error at the end of the process using: http://server:8300/HyperionPlanning/AppWizard.jsp.
    For information, I have 4 different databases in DB2 (Shared Services, Essbase, Planning and the Planning Instance).
    Here is the error log I have in Tomcat:
    26 févr. 2009 10:52:08 org.apache.coyote.http11.Http11Protocol init
    INFO: Initialisation de Coyote HTTP/1.1 sur http-8300
    26 févr. 2009 10:52:08 org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 594 ms
    26 févr. 2009 10:52:08 org.apache.catalina.core.StandardService start
    INFO: Démarrage du service Catalina
    26 févr. 2009 10:52:08 org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Apache Tomcat/5.0.28
    26 févr. 2009 10:52:08 org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    26 févr. 2009 10:52:08 org.apache.catalina.core.StandardHost getDeployer
    INFO: Create Host deployer for direct deployment ( non-jmx )
    26 févr. 2009 10:52:08 org.apache.catalina.core.StandardHostDeployer install
    INFO: Installation d'une application pour le chemin de contexte /HyperionPlanning depuis l'URL file:C:\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning
    Creating rebind thread to RMI
    Cache Control is :public,max-age=2592000
    26 févr. 2009 10:52:12 org.apache.coyote.http11.Http11Protocol start
    INFO: Démarrage de Coyote HTTP/1.1 sur http-8300
    26 févr. 2009 10:52:13 org.apache.jk.common.ChannelSocket init
    INFO: JK2: ajp13 listening on /0.0.0.0:8302
    26 févr. 2009 10:52:13 org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/31 config=null
    26 févr. 2009 10:52:13 org.apache.catalina.startup.Catalina start
    INFO: Server startup in 4781 ms
    java.util.MissingResourceException: Can't find bundle for base name HspCustomMsgs, locale fr
    java.util.MissingResourceException: Can't find bundle for base name HspImgs, locale fr
    java.util.MissingResourceException: Can't find bundle for base name HspCustomImgs, locale fr
    java.util.MissingResourceException: Can't find bundle for base name HspImgs, locale fr_FR
    java.util.MissingResourceException: Can't find bundle for base name HspCustomImgs, locale fr_FR
    [INFO] AuthChallengeProcessor - basic authentication scheme selected
    [INFO] AuthChallengeProcessor - basic authentication scheme selected
    Setting Arbor path to: C:\Hyperion\common\EssbaseRTC\9.3.1
    Connection to the datasource created successfully.
    createSchema hyperion.jdbc.base.BaseBatchUpdateException: [Hyperion][DB2 JDBC Driver][DB2]No default primary tablespace exists for the new table.
    hyperion.jdbc.base.BaseBatchUpdateException: [Hyperion][DB2 JDBC Driver][DB2]No default primary tablespace exists for the new table.
         at hyperion.jdbc.db2.DB2ImplStatement.executeBatch(Unknown Source)
         at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
         at hyperion.jdbc.base.BaseStatement.executeBatch(Unknown Source)
         at com.hyperion.planning.sql.HspSetupSQLImpl.createSchema(Unknown Source)
         at com.hyperion.planning.HspManageApplication.createApp(Unknown Source)
         at com.hyperion.planning.appdeploy.HspManageAppSession.createApplication(Unknown Source)
         at HspCreateApp.Handle(Unknown Source)
         at HspCreateApp.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Unknown Source)
    Unable to create Scehma for application. Exiting Application Creation.
    Exception in Application Creation :Unable to create Scehma for application. Exiting Application Creation.
    java.lang.IllegalStateException: Unable to create Scehma for application. Exiting Application Creation.
         at com.hyperion.planning.HspManageApplication.createApp(Unknown Source)
         at com.hyperion.planning.appdeploy.HspManageAppSession.createApplication(Unknown Source)
         at HspCreateApp.Handle(Unknown Source)
         at HspCreateApp.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Unknown Source)
    java.lang.RuntimeException: Create application failed.
         at com.hyperion.planning.appdeploy.HspManageAppSession.createApplication(Unknown Source)
         at HspCreateApp.Handle(Unknown Source)
         at HspCreateApp.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Unknown Source)
    I think it is something related to DB2 (on a different server), but i don't know what...
    Many thanks for any help and kind regards.

    Hi,
    It looks like it is around the DB2 set up.
    In the errors you posted :-
    No default primary tablespace exists for the new table
    Unable to create Scehma for application
    So maybe it is down to tablespace or permissions
    Be sure to see the sections in the installation guide regarding DB2, also any information in the 9.3.1 readme
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error trying to create a Master Form

    Hello,
    <b>I keep getting told to put this in different sections of the forum.</b>
    Exception from wwv_generate_component.build_procedure (WWV-01821)
    Error creating module: ORA-01403: no data found (WWV-16042)
    Has anyone seen this error before? I am new at creating forms...and ORACLE.
    All Help is Appreciated!!!!

    Keith,
    This is the Application Express forum. I think you are using Oracle Portal, an unrelated product. This forum might be where you need to go: http://forums.oracle.com/forums/forum.jspa?forumID=7 .
    I am fairly new to ORACLE...
    It's Oracle.
    Scott

  • Xcode internal error "couldn't create ~/.Xcode"

    hi all, I've got a fresh download of xcode 3.2.4 on snowleopard 10.6.5 and when starting a project on my usual User (which is a standard user) i get an "couldn't create ~/.Xcode" error.
    I've created a new standard user and xcode works fine with it
    id prefer to keep to my one usual user, any ideas?
    edit - should add that if i click 'continue' then xcode launches but i'm loathe to trust it
    Message was edited by: giantreign

    giantreign wrote:
    how do i add myself to my home folder with read & write permissions and get rid of _unknown?
    In the Finder, do Get Info on your home folder. At the bottom of the Get Info window, click the + button.
    The actual ownership may be incorrect so you might not be able to remove _unknown.
    Another alternative would be to use the Terminal:
    sudo chown $USER:staff ~

Maybe you are looking for

  • My iPod Touch 4G says my social security code is invaild but it's NOT. How Can I fix this problem?

    I keep on trying and it says my social security code is INVAILD. It wont let me download any apps or update them. If this has happened to you and you found a solution to this PLEASE I BEG OF YOU TO HELP ME!!!

  • Windows 8.1 pro WIFI issues

    After updating to windows 8.1 pro from windows 8.1 preview, wifi is showing "No internet access". no issue with router as it is working on other devices. Tried disable-enable. tried re install. tried updating driver. nothing seems to work. any help w

  • ITunes 10.4.1 will not download via Software update after I click to agree to terms, nothing happens

    I have OS Lion and went to Software Update to get the latest iTunes 10.4.1 (currently running 10.4 64 bit).  Software Update notifies me of the update, I click install, and then I agree to new terms....and that's all that happens.  Software Update re

  • Trigger .jsx (Javascript) through Applescript

    I have .jsx (javascript) for InDesign CS5. I am trying to automate in a batch mode. I would like to know how to trigger that Javascript through applescript. It would be much appreciate if any one help me on this regard. ~John

  • Quizzing Questions

    I'm new to Captivate and these boards. I saw new, but I'm really self taught. I took an Element K course, and we've also purchased the Iconlogic book. But I still have a few questions that I can't find the answers to, and here's one of them: I want t