Internal no. for challan

I ve entered one invoice with TDS.
after that I made an remittance challan
but the error is coming : No unpaid tax lines exist for the given selection criteria.
So i ve to check the configuration for internal number for challan.
or what the problem is , plz explain

Hai,
Kidnly check whether you have section code present for the tax line item.
Raghav

Similar Messages

  • How to create an Internal Customer  for Ineterplant stock Transfer

    Daer Gurus,
    Please tell me how to create an Internal Customer for Interplant stock transfer.
    Actually I have three plants out of them two plants are providing goods to third plant. Also both the plants do the stock transfer in eachother.
    How to maintain the Two plants as supplier and third one as a receiver plant. 
    which account group I should use and what details I have to use for it ?  Do I need to maintain all three plants under same account group? I know the theoratical process only for stock transfer please guide me on this Internal customer issue.
    thanks in advance
    regards,
    Sanjay

    Hi,
    Take your three plants as AAAA, BBBB and CCCC.... and these 3 plants may be assigned to the Sales Area of AAA 10 10, BBB 10 10 and CCC 10 10.
    Your STO will have following 4 flows.
    1. AAAA - CCCC
    2. AAAA - BBBB
    3. BBBB- CCCC
    4. BBBB- AAAA
    you need to do the following settings...
    1. Assign the Sales Area for the Shipping Plants... for ex (AAAA - AAA 10 10 and BBBB - BBB 10 10)
    2. You need to Create a Internal Customer for every Rec. Plant and need to assign the same to the Rec Plant. And Also note that this customer needs to be created in the Sales Area which is assigned in the Shipping Plant.
    (Note that CCCC will be Rec Plant from Both AAAA and BBBB... So you need to extend that customer for both the Sales Area of the plants AAAA and BBBB)
    Following is the example settings required for our scenario 1.
    AAAA will be a supplying plant and CCCC will be rec. plant....  for this you need to create a internal Customer (for ex C1000) in Sales area AAA 10 10 (which is assigned to the plant AAAA) and assign the Customer number (C1000) to Plant CCCC.
    Now you created a plant CCCC as a customer in Sales Area AAA 10 10 (which is nothing but plant AAAA)...
    Also here you need assign the Sales Area AAA 10 10 to the Plant AAAA.
    Hope this will be useful to you.
    Thanks,
    Muthu

  • Inspiron 1525 not able to select internal mic for webcam, nor is it showing up on Control Panel, Sound, Audio Devices

    Initial problem was Dell Webcam video recording records no sound.
    In Control Panel, Device Manager, Sound Video and Game Controllers there are two High Definition Audio Devices listed: Location 1 (Internal High Definition Audio Bus) - I deduce this is the internal mic; and Location 2 (Internal High Definition Audio Bus) - I deduce this is external microphone jack. Both have the same driver version.
    The Control Panel, Sound, Recordings Tab showed 2 devices that looked identical except the bars that show green with volume were only on the first one, which is also the default one, and would detect sound if you got real close to the webcam mic when talking. Both devices displayed as 'working'.
    Accessories, Sound Recorder recordings are silent no matter how close you get to internal webcam mic.
    Dell WebCam Audio Source tab has two selections, both reading Microphone (3 - High Definition Audio Device). Both selections record sound with the EXTERNAL MIC jack. There is no way to select the internal webcam mic, it is not an option.
    Per instructions found on the web, I uninstalled the first device only in Device Manager and rebooted. The same driver version as before was installed. But now the settings have changed. Device Mgr still shows Loc 1 and Loc 2. However, under the Sound, Recordings tab there are still 2 devices, but the first one says 'currently unavailable' , is still the default, and the sound bars that go green for audio testing are on the SECOND device now instead of the first one. If you check the Properties for each device, they BOTH are showing the same location Location 2 (Internal High Definition Audio Bus), i.e., the external mic jack.  Loc 1 device (built in mic) is not showing up!!
    Accessories Sound Recorder works with the EXTERNAL mic. (How does it know which one to use, it's not giving me a choice?)
    So the Location 1 device (internal mic) is not showing up anywhere besides the device manager. I want to use the internal mic for skype and webcam. Somehow I need to get the Loc 1 device to show up on the Sound - Recording tab and in the Webcam Audio Source list? What do I do?
    Thank you in advance for your help.

    kestark
    This is Vista.
    Go to the Inspiron 1525 support page. Find the small blue "Change OS" and click on the arrow. Select Vista.Then download and install these 3 items with a restart between each one.
    1. Dell System Software in the System Utilities category.
    2. Intel Mobile Chipset in the Chipset category.
    3. Sigmatel audio driver in the Audio category.
    See if it works any better after you get the Sigmatel driver installed.

  • New internal drive for Dual 450

    I am looking to add an additional, or replacement internal HD for my old Dual 450 G4. Can anyone tell me which one to get? I am utilizing the machine as a storage and archive device on a local network.
    Currnetly runnin OS X - not concerned with needing OS 9

    Hi, J2, and welcome to the Discussions!
    Your Mac's native drive bus will only recognize the first 128GB of formatted space on any size drive you install on the ribbon cable connected to the logic board, so look for a 120GB or smaller drive if you don't intend to purchase and install a PCI card to overcome this size limitation.
    If you intend to connect the drive directly to the built-in bus as above, look for a 3.5 inch ATA (not SATA or SCSI) drive which runs at 7200 RPM, preferably with an 8MB buffer, versus a 2MB buffer, which is somewhat slower.
    An ATA drive might be described as Ultra-ATA 133, IDE, EIDE, ATA 100, PATA, or parallel ATA. For shopping purposes, all of these terms basically refer to the same thing, so don't let them confuse you.
    The major brands are Seagate, Maxtor, Western Digital, and Hitachi/IBM. Any of these brands should serve you well and you might shop online for the best "deal" by comparing cost/GB. Sales are common and often change from week to week, particularly amongst the mass merchants like Best Buy, Circuit City, Fry 's (outpost.com), Tiger Direct, Newegg, CompUSA, etc., so it pays to shop around online if you want to save some money. The best deals include a rebate or rebates.
    Regarding OS 9, even though you don't intend to use it, when you do format the drive, I'd recommend checking the box in Disk Utility to install the OS 9 drivers anyway, which doesn't take up any usable space on the drive and might come in handy in the future, in case you need to update firmware or perform other tasks which OS X can't handle.
    Gary

  • How to create internal table for a structure in BSP

    hi ,
    I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
    <% data: begin of itab_1 .
                     include type zuvendstr.
                     data:end of itab_1.
                     data wa_str like line of itab_1.
                     loop at itab_1 into wa_str. %>
                    <tr>
                     <td><%=wa_str-name%> </td>
                           <%endloop.%>
    In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPS

    Hi,
    You can define itab_1 like this (assuming zuvendstr is a structure type):
    DATA: itab_1 TYPE TABLE OF zuvendstr.
    Regards,
    Tanguy

  • How can I know if my new internal hd for macbook pro is compatible?

    I have been trying to upgrade my internal HD for macbook pro early 2008 2.4 and have been having a hard time getting it to boot.  Problems with both WD and Seagate.  I am wondering if the problem is with Mavericks.  I got a good back up from Time Machine to load on the hybrid drive.  Then when I try to restart it shows the apply symbol with no chime and then a black screen comes over the blue screen with some code (strange problem I have never seen) I can see that all the data is on the drive.  I was able to partitian in disk utility.  Anything ringing a bell.  I have done several switches like this and this is the first time I have had so much trouble.  I reinstalled my old drive just to make sure there was not another hardward issue and everything is fine there.  In fact I have a new logic board freshly installed by mac. 

    Your machine has a SATA 2 interface and I'm sure the new drives are SATA 3. They should still step down and work though. It's possible your SATA cable is marginal and the newer drive is trying to demand more out of it than the old one did. A good test would be to put the new drive in an external enclosure and see if it works ok from there. If so, it's probably the cable.
    http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1394657992&sr=1-2&keywords=2.5+enclosure
    How did you install Mavericks on the new drive?

  • I'd like to buy an iPhone 4S in France directly from the Apple Store, not from the operators. But, I will go back to my country, Thailand. So, I'm wondering to know that there is an INTERNATIONAL warranty for iPhone, and is it valid in Thailand (warranty)

    I'd like to buy an iPhone 4S in France directly from the Apple Store, not from the operators. But, I will go back to my country, Thailand. So, I'm wondering to know that there is an INTERNATIONAL warranty for iPhone, and is it valid in Thailand (warranty). Would it be able to be claimed at the iStudio in Thailand?

    There is NO International Warranty for the iPhone.  Your best bet is to purchase one in Thailand.  If you purchase a phone in France, you will NOT get warranty service on it in Thailand and will have to return it to France (or any EU country) for warranty service.

  • Down payment against the Internal Order - for Capital Expenditure

    Dear friends
    I am getting an error while making down payment against the purchase order.
    The order of my entries or steps are as follows:
    Created one internal order for Capital WIP with budget and availability control activation.
    Created one purchase order against a vendor with reference to the above Internal Order.
    When I am making the down payment to the vendor through tcode:F-48, the system throwing an error
    "Define Cost Elements for Down Payments".
    Can any one please explain why this error is coming. When I checked in Internal orders, there is a TCode: OKEP for Define Default Cost Elements for Down Payments.
    System is asking for cost element, but where as what ever the down payment we are making is nothing but advance which is current asset. Why system is asking for cost element?
    Can any one give me the guidance how to handle the issue.
    Thanks in Advance
    Kiran Kumar A

    The reason is when you want the down payment for AUC to be capitalised, then you would need to create cost element for Downpayments.
    Normally as per design of SAP, down payment being a Balance Sheet Account (Current Asset as you rightly mentioned) doesnot need / accept an Cost object, as a special case since down payments for AUC needs to be capitalised and hence need to be carried to Controlling (Internal Order) by creating Cost Element for Downpayments.
    Go ahead and create the cost element. That would resolve your issue.

  • Using internal order for a gl in FBCJ Screen

    Hi All,
    I would ike to use internal order for GLs/Vendor accounts like employee vendors or MM vendors in the Cash Journal i.e. FBCJ Screen.Hos should I do it.
    Simillarly I would like to give the work order /po reference for such advances in the FBCJ Screen.Is it possible to do it?
    Thanks in advance for your replies.
    Regards,
    Manoj mehta

    Hi Manoj,
    It is possible to use Internal Order for GLs/Vendor accounts like employee vendors or MM vendors in the Cash Journal i.e. FBCJ Screen. The internal order field maybe invisble on the screen.Follow the following steps:
    1. Click on the Configuration tab - Blue, Yellow, White Striped Square on the right top corner of FBCJ Screen.
    2. It will open the Table Setting Tab, Click on Administrator.
    3. It will open Edit System Settings, Check whether the in the cloumn, order is having tick in the Invisible Column. If it is ticked remove the tick & click on Activate.
    4. Close the Edit System Settings  & Save the Table Settings.
    Thank You.

  • Number of entries in the internal table for perticular field value

    hi All,
    Is this possible to get the count of records from the internal table for a perticular field value.
    currently my requirement is to get the entries from the internal table which does not have two records for perticular field value (say a = 123) whose status is active (say b = 'X').
    also suggets should use LOOP or DELETE or DESCRIBE for a internal table to ful fill this requirement.
    Thanks in advance.
    Pradeep

    Try like this..
    Create another table itab2 with same structure as itab1 & move the contents of itab1 to itab2
    ITAB2[] = ITAB1[].
    Then delete entries from itab2
    Delete itab2 whete a = '123' and b = 'X'
    Then use Describe statement to get the no of entries
    Describe table itab2 lines v_lines.
    Hope this helps...

  • Link to purchase internal webcam for G56

    I cannot find a direct link to purchase an internal webcam for this G56. Could someone assist? Thanks

    ashleyquick wrote:
    I cannot find a direct link to purchase an internal webcam for this G56. Could someone assist? Thanks
    Hi,
    You may find the right part number in the service guide. Go to the Support & Drivers on the top of this page, then enter your laptop model and search it. When the product homepage comes up, go to the User Guides section and find a Maintenance and Service Guide for G56/CQ56 laptops. 
    You could also go on ebay and search for "webcam G56 laptop"..
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • To count number of records in an internal table for a condition

    Hello All,
            I want to count number of records in an internal table for a condition.
    For e.g. -- I have one internal table IT which having fields F1, F2, F3, F4, F5.
                     Now, I want number of records in itnternal table IT where F1 = 'ABC'.
    Is it possible to do..?? If yes, then how.??
    Thanks in advance...!!
    Regards,
    Poonam.

    Hi,
    If you mean an internal table, there are a few ways to do this.
    1 One would be to loop over the table with a WHERE clause and increment a counter.
    data: lv_counter type i.
    clear lv_counter.
    loop at itab where fld1 = 'ABC'.
    lv_counter = lv_counter + 1.
    endloop.
    lv_counter now has the number of rows per the condiction.
    2  Well, you may want to try this as well, and compare to the LOOP way. Not sure what kind of overhead you may get doing this way. Here ITAB is our main internal table, and ITAB_TMP is a copy of it. Again I think there may be some overhead in doing the copy. Next, delete out all records which are the reverse of your condition. Then whatever is left is the rows that you want to count. Then simply do a LINES operator on the internal table, passing the number of lines to LV_COUNT.
    data: itab type table of ttab.
    data: itab_tmp type table of ttab.
    itab_tmp[] = itab[].
    delete table itab_tmp where fld1  'ABC'.
    lv_count = lines( itab_tmp ).
    Thanks & Regards,
    ShreeMohan

  • Default internal order for each vendor

    Hi
    I am creating employee as a vendor in FK01. Each vendor is created as internal order for doing employeewise budget check. So when i book any expenses for vendor, i want that internal order should automatically flow on the basis of vendor.
    So is there any way from where i can default internal order on the basis of vendor.
    Edited by: Deepak Agrawal on Jun 9, 2011 5:05 PM

    Hi
    The only way to do the same is through Substitution rule by using an user exit. You need to create a Z table and maintain the mapping of vendor to IO. There after in GGB1, write a substitution rule for the node, complete document
    Check if Vendor Account =X
    Substitute using user exit
    In the user exit call up the z table.
    Regards
    Sanil Bhandari

  • Internal order for DC

    Hi,
    We want to create an internal order for a project we are going to start in one of the Distribution centers. Since the DC is not associated with a plant, can we create an internal order exclusively for the DC? I created a new order type and in the field selection I hide Plant and set the location field required. However, when I was creating a new Internal order it says location/plant. If internal order can be created only for plant then how can we track the activities of the work done in a DC? Please share your ideas.
    Thanks

    Hi
    The Location field used by you seems to be related to a Location in a Plant and hence the dependency of the Plant.
    You can hide this Location field and  use some other Text field for Keying in values pertaining to Location ( As per your requirement).
    Harsh

  • Internal order for AUC with cost center - 'Please Select proper plant code'

    Hi All,
    User is getting error 'Please Select proper plant code', while inserting 'cost center' in field 'Responsible CCtr' for new Internal order which is for AUC.
    In Devlopment server also when we try to create asset through internal order we get same error.
    For your information this is new Plant, profit center and cost center for which we are trying to create internal order for AUC.
    If we try to post without Cost centre entry is saved. But we want to add cost center.
    Please help to resolve.

    Hi,
    If it is a custom message then please check whether any Validation or USer exit is maintained for the IO master data. If yes, then update the cost centre accordingly.
    Regards
    Sreekanth

Maybe you are looking for