Internal setter & public getter

Hi all,
I have two classes, both in the same package, one of which parses xml and adds a value to the second via an internal set method. This initially works fine but as soon as add a public get method to the second class I get an error (1059: Property is read-only).
The problem goes away if I make both methods public or internal but in this situation I would like to have one of each. Is this possible? I thought I had done this in the past without any problems but maybe not.
Cheers for any advice

Since there is no overloading in AS3, one cannot have any ambiguity in terms of name spaces. Accessors are treated as properties, so, as any property, it cannot be both protected and public. In your case solution, perhaps, is to make the variable accessors designed to handle protected (or internal), while getter - public (and no setter).

Similar Messages

  • Internal and Public DNS conflict breaks mail

    History:
    We set up a new Mac Mini Server to replace our existing Server. The Mac Mini Server is setup behind a Time Capsule, which acts as our router and DHCP server. It also acts as our firewall on the public IP address and forwards mail to our internal server. Our situation is almost identical to the example situation on page 18 to 19 in the 'Getting Started' guide.
    Our ISP acts as our DNS server and they host our public website. They also used to host our mail, but we have now moved the mail to our new in-house server. We asked our ISP to update their MX records to point to our static public IP address. Public DNS records for server.mydomain.com also resolve to this IP address.
    When we originally set up the new mac mini server, the ISP had not yet updated the MX records. I am wondering if this affects how the Server sets up DNS on the local server machine?
    Issue:
    The local server machine on the local LAN is called server.mydomain.com, which resolves via local DNS (hosted by our server) to the server's internal IP address. (The local DNS server was setup automatically by the Server during initial installation / setup.) This conflicts with with public DNS records which identify server.mydomain.com with our public IP address at 205.200.19.225. This somehow causes confusion for the server which consequently seemingly randomly resets our domain (mydomain.com) and host name (server.mydomain.com) settings under Mail settings - which breaks our mail service. (We then edit these to the correct settings and all works again.)
    I spoke to an Apple tech and they advised that we reinstall the Server operating system, using a local server name that differs from the public name. e.g. server.mydomain.lan (local) vs. server.mydomain.com (public).
    *This may seem like a dumb question*: Would it be easier to keep our local host and DNS set up to server.mydomain.com and then rather have our ISP change the records for our public address / IP to mail.mydomain.com or public.mydomain.com? If we could make the change via the ISP's records versus our own, then it would save us a lot of work.
    *A second potentially dumb question:* Since we rely on our ISP for DNS name servers, could we delete / stop the local DNS server for the local network and just use straight IP addresses instead?
    *Plan of Action:*
    Assuming that there is not an easy fix via the ISP's DNS records, then I'll reinstall the operating system and use server.mydomain.lan as the local machine and domain name. If I do this, then what should I be using as the domain and host name settings in mail? .com or .lan?
    Should there be any need to manually configure DNS settings to make Mail work?

    Mr Hoffman and Corbywan - thanks for the interesting and educational discussion. I must admit that I am still a bit confused and would appreciate any further help in understanding this issue!
    *My situation:*
    - Server on a LAN, which sits behind a Time Capsule router.
    - The Time Capsule router serves DHCP and Internet to the LAN and sits on our public static IP Address.
    - Our ISP has set up MX and domain records to forward public requests for our domain to our static IP address.
    - Time Capsule acts as our firewall and forwards Mail and other incoming services to our internal server via port forwarding.
    - Local DNS service is provided by the local server so that it can provide services to the local network. Non local requests are forwarded to the ISP DNS service.
    *The problem*
    We seem to have established that Snow Leopard Server breaks when the internal domain name matches the public domain name, because of conflict between the internal and public DNS which resolve to different IP addresses for the same domain.
    *The solution*
    I am looking for the easiest and most basic way to fix this problem. My understanding is that the simplest would be to reinstall our Snow Leopard Server to a new and different local domain name.
    I am thinking of using server.example.lan for our local LAN domain name - which would be resolved to our private IP address via local DNS on the local server. I would be keeping server.example.com for our public domain name - which would be resolved to our public IP address, which would be forwarded from the Time Capsule to the internal server.
    Now where I start getting confused is this: If Snow Leopard Server requires a Fully Qualified Domain Name to do things like send mail, then do I need to register my internal domain name? And how would this resolve from a public DNS server to the internal private IP address? Or is it more an issue where as long as the internal (albeit 'fake') domain name does not conflict with an existing public domain name?
    *Other items:*
    After setup, I will verify that Snow Leopard Server has setup our local DNS correctly for local DNS service.
    If I understand correctly, I would set up Mail Settings - 'Domain Name' as the local domain name: i.e. example.lan and I would set up the Host Name as server.example.lan - is this correct? Would this work if these are not FQDN?
    How does the mail server reconcile these local domain names with the public domain names? I assume that I need to check the box at Mail - Settings - Advanced - Hosting: "Include server's domain as local host alias" ? Or would I manually add an alias to the Local Host Aliases under the same tab?
    Thanks!

  • Set and get parameter id

    Hi,
    I need to store one variable value and I need to retrieve the same variable value in same program. For this I have written set and get parameter ids in the same program. It is working fine but if I log off the system and if I logon the system it is not working I mean before log off the variable is showing some value if I log on again that variable is showing empty. But I want to capture the field values after log off and log on also. Is there any other option can I use table?
    Please help me I will give points.
    Thanks.

    Hi
    SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens
    SAP global memory retains field value through out session.
    set parameter id 'MAT' field v_matnr.
    get parameter id 'MAT' field v_matnr.
    They are stored in table <b>TPARA</b>.
    ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data
    to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
    ABAP memory is temporary and values are retained in same LUW.
    export itab to memory id 'TEST'.
    import itab from memory Id 'TEST'.
    Here itab should be declared of same type and length.
    http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
    ABAP Memmory & SAP Memmory
    http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
    http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
    Regards
    Anji

  • Memory Problem with SEt and GET parameter

    hi,
    I m doing exits. I have one exit for importing and another one for changing parameter.
    SET PARAMETER exit code is ....
    *data:v_nba like eban-bsart,
           v_nbc like eban-bsart,
           v_nbo like eban-bsart.
           v_nbc = 'CAPX'.
           v_nbo = 'OPEX'.
           v_nba = 'OVH'.
    if im_data_new-werks is initial.
      if im_data_new-knttp is initial.
        if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
           or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
          set parameter id 'ZC1' field v_nbc.
        elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
          set parameter id 'ZC2' field v_nbo.
        elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
          set parameter id 'ZC3' field  v_nba.
        endif.
      endif.
    endif. *
    and GET PARAMETER CODE IS....
      get parameter id 'ZC1' field c_fmderive-fund.
      get parameter id 'ZC2' field c_fmderive-fund.
      get parameter id 'ZC3' field c_fmderive-fund.
    FREE MEMORY ID 'ZC1'.
      FREE MEMORY ID 'ZC2'.
       FREE MEMORY ID 'ZC3'.
    In this code i m facing memory problem.
    It is not refreshing the memory every time.
    So plz give me proper solution.
    Its urgent.
    Thanks
    Ranveer

    Hi,
       I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
    If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
    To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
    Sample Code :
    Data declarations for the function codes to be transferred
    DATA : v_first  TYPE syucomm,
           v_second TYPE syucomm.
    CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
    Move the function codes to the program varaibles
      v_first  = gv_bdt_fcode.
      v_second = sy-ucomm.
    Export the function codes to Memory ID
    EXPORT v_first
           v_second TO MEMORY ID c_memid.        "ZCCBPR1  --- Here you are sending the values to memory
    Then retrieve it.
    Retrieve the function codes from the Memory ID
      IMPORT v_first  TO v_fcode_1
             v_second TO v_fcode_2
      FROM MEMORY ID c_memid.                                   "ZCCBPR1
      FREE MEMORY ID c_memid.                                   "ZCCBPR1
    After reading the values from memory ID free them your problem should be solved.
    Thanks
    Barada
    Edited by: Baradakanta Swain on May 27, 2008 10:20 AM

  • Set and get values with vector

    I have a class that that querys a db and sets a value of the result to a vector array. Is it possible to set and retrieve that vector array using the set and get methods?
    ex:
    my class:
    sql = "Select ...";
    Vector fName = new Vector();
    rs = sqlStatement.executeQuery(sql);
    if (rs != null) {
    while (rs.next()) {
    fName.add(rs.getString("fName") + "");
    rs.close();
    setFName(fName);
    how would I set up the set and get methods???
    thanks

    I am unsure of what you are asking:
    A Vector has set and get methods for it, you use indexes of the array to say what element you want to work with.
    If you are asking how do you know what elements of the Vector contain which data columns, you have to remember how you put them in.
    If you are asking if you can use set to load the Vector: then NO, you have to have elemenets already there to change, use the add method.
    If you are asking how to access the elements of the Vector you use an Enumeration:
    for(java.util.Enumeration e = v.elements(); e.hasMoreElements();){
    s = (java.lang.String) e.nextElement();
    vl.add(s.substring(0, 12));
    If you are asking something else: please elaborate what you want--my brain may not be very functional this morning.

  • Default sales org on selection screen using set and get parameter!!

    Hi,
    I need to default value on selection screen using SET n GET parameter...logic to be used should be:
    Sales Organisation:
    This field should be filled by default using the user parameter id VKO. (using sentence GET PARAMETER and SET PARAMETER)...
    Hope i need to write the code in initialisation and what shud b the content?
    Regards
    Gunjan

    hi,
    TABLES <table name>.
      SET PARAMETER ID VKO FIELD <tablename-fieldname>.
    call transaction 'zxx'.
    try this sample program,
    REPORT BOOKINGS NO STANDARD PAGE HEADING.
    TABLES SBOOK.
    START-OF-SELECTION.
      WRITE: 'Select a booking',
      SKIP.
    GET SBOOK.
      WRITE: SBOOK-CARRID, SBOOK-CONNID,
             SBOOK-FLDATE, SBOOK-BOOKID.
      HIDE:  SBOOK-CARRID, SBOOK-CONNID,
             SBOOK-FLDATE, SBOOK-BOOKID.
    AT LINE-SELECTION.
      SET PARAMETER ID: 'CAR' FIELD SBOOK-CARRID,
                        'CON' FIELD SBOOK-CONNID,
                        'DAY' FIELD SBOOK-FLDATE,
                        'BOK' FIELD SBOOK-BOOKID.
      CALL TRANSACTION 'BOOK'.
    regards,
    siva
    Message was edited by:
            Shan

  • Abstract class with set and get methods

    hi
    how to write set and get methods(plain methods) in an abstartc class
    ex: setUsername(String)
    String getUsername()
    and one class is extending this abstract class and same methods existing in that sub class also..... how to write......plz provide some ideas
    am new to programming....
    asap
    thnx in advance

    yes... as i told u.... i am new to coding......
    and my problem is ..... i have 2 classes one is abstract class without abstract methods.. and another class is extending abstract class.....
    in abstract class i have 2 methods...one is setusername(string) and getusername() ..... how to write these two methods.... in abstract class i have private variables username...... when user logins ..... i need to catch the user name and i need to validate with my oracle database and i need to identify the role of that user and based on role of that user i need to direct him to appropriate jsp page.......
    for that now i am writing business process classes..... the above mentioned two classes are from business process.....
    could u help me now
    thnx in advance

  • Report  using Set parameter & get parameters.

    Hi,
           My requirement is from select query  the list of PO will be display. Now i want when i click on one of the purchase order .
    i want to diaplay PO using CALL TRANSACTION 'ME23N'  with the help of set and get parameters .  or can i do it with interactive report.
    Regards,

    Hi,
    1) Write a Report to show the Output(Use HIDE statment for PO filed while outputing the list).
    2) In the event AT LINE-SELECTION write logic.
    GET CURSOR FIELD field VALUE val.
    SET PARAMETER ID 'BES' FIELD dobj.
    CALL TRANSACTION ME23N.
    Regards,
    J.

  • Japanese Data Set and Get Problem with SQL

    Hi,
    I am not able to retrieve or set data contain Japanese characters.
    Formerly our set up was running just fine. But on doing installation on a new machine, things have gone all haywire.
    I installed Win NT 4.0 Japnese version and SQL 7.0 and later Win 2000 Server Japanese version with same SQL 7.0, but on both get and set I get SQL Exceptions:
    Query 1:
    SELECT DISTINCT MAKER_CD FROM T_MAKER WHERE MAKER_NAME = '�a�l�v�A���s�i' Exception:
    [Microsoft][ODBC SQL Server Driver][SQL Server]Unclosed quotation mark before the character string '�a�l�v�A��'.
    Query 2:
    Insert into Car (intCarID, nvchCustomerID, nvchCarMaker, nvchCarModel,nvchCarDescription, nvchCarCode, nvchCarColor, tintRegistrationCalendar,tintRegistrationMonth, intRegistrationYear,nvchAnnualMileage, nvchPurpose, intNoOfKms,intAirBag, btEcologicalCar, btAntilockBreakSystem,btAntiskid, btSafetyBody, btAntitheft, btFourWheelDrive,btCarModification, nvchLicensePlateArea, intLicensePlateType,nvchLicensePlateHiragana, tintLicensePlateNumber,nvchCarManufacturingNumber, nvchCarOwner, btCurrentlyInsured)Values( 1, 'NI200205040001','','', '', 'HA11S', '���I����������',2,1, 11 ,'5000', '�����E���W���[',0,2,0,0,0,0,0,0,0,'',0,'null', '0' ,'', '�_�������{�l' , 0)
    Exception:
    [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near the keyword 'null'.
    I do not wish to Prepared Statements. I will need to update all my JDBC calls this way.
    Would be grateful if any solutions to this problem could be provided.
    Tahanks and Regards

    If you are using the JDBC-ODBC bridge, then add the 'charset' property (with the name of the japanese charset as value, or whichever you are using) to the Properties instance you pass on to getConnection().
    Alin.

  • Hi i use a macpro i7 wt 7200rpm internal drive i get this message Disk is too slow-(prepare) (-10001) when i am using logic 9

    Hi i use a macbook pro 17" 2.66ghz intel core i7 with 8gb ram & a 500gb@7200rpm internal drive i get this message "Disk is too slow. (Prepare)  (-10001) when i am using logic 9 wiyh just a 5 vsts loaded 2 of them being esx24's . i used to not get this warning earlier in the same or even heavily loaded projects.
    When i press play the beachball appears for a minute or so then the message.
    Even when i open up a new project a beachball appears for about 30-40 secs and then the project opens up
    i have even tried opening up the projects w/o any vst's loaded (i have disabled them from audio units manager)
    Initially i thought it was a hard drive problem so apple had it replaced for me but i am still encountering the same problem.
    have even tried disabling the sudden motion sensor from terminal no luck there too
    tried reloading osx 10.6.7 no luck there too
    what do i do
    aggi

    How full is your 500 GB hard disk?
    Do you have 10% to 15% free space available?

  • When bookmarking a page, I can't get the complete list of bookmark folders to dropdown in order to select any folder in which to bookmark page. What do you set to get whole list of folders in Bookmarks to drop down?

    When bookmarking a page, I can't get the complete list of bookmark folders to drop down in order to select any folder in which to bookmark page. The 'Folder:' bar has 'Bookmarks Menu' showing. The arrow on the bar drops down 5 recent folders to which pages have been saved, but the pop down arrow to the right of the bar just opens to show the three categories and 'New Folder' button. What do you set to get whole list of folders in Bookmarks to drop down?

    To all, embarrassingly enough, I have discovered that I didn't know how to expand the three categories including 'Bookmarks Menu' in the 'Bookmark This Page' pop up interface. It was expanded by default on the initial Firefox opening and first page bookmark attempt. Next use it only showed categories. I clicked and double clicked the 'Bookmarks Menu' line, but failed to see the small, shaded triangle used to expand/collapse list. If it appears collapsed, just tap triangle at left of line to see all folders. It seems to open the same way after I do it for first time. Sorry for the inconvenience, and thanks for all the attempts to help.

  • Script label: Set and get it?

    Hi
    How can I set and get the script label of a frame in my plugin?
    Thanks for the help.
    Best regards
    Hans

    Hi,<br /><br />the IScript-Interface has a GetTag() and SetTag() method. While GetTag() is fine, you'll get Asserts when using SetTag() - thus I changed that to  processing kSetScriptingTagCmdBoss.<br /><br />Example (script-label on a splineitem, stripped of nil-pointer-checks):<br /><br />InterfacePtr<IScript> script(itemRef, UseDefaultIID());               <br />PMString label = script->GetTag();<br />ScriptList scriptList.push_back(script);<br />InterfacePtr<IScriptManager>scriptMgr(Utils<IScriptUtils>()->QueryScriptManager(kScript TagMgrBoss));<br />InterfacePtr<ICommand> cmd( CmdUtils::CreateCommand(kSetScriptingTagCmdBoss));<br />InterfacePtr<IScriptTagCmdData> scriptTagData(cmd, UseDefaultIID());<br />scriptTagData->SetScriptList(scriptList, scriptMgr->GetRequestContext(), label);<br />cmd->SetItemList(UIDList(itemRef));<br />ErrorCode err = CmdUtils::ProcessCommand(cmd);<br /><br />Regards,<br /><br />Bernt

  • Accessing Custom Controller from setter and Getter methods

    Hi Gurus
    How can we access the custom controller from setter and getter methods,is there any way to do that.
    Thanks & Regards
    Rajasekhar

    Hi Steve.
    Thanks very much for valuable information,  the main controller class is getting tracked in mo_owner which is declared as  CL_BSP_WD_VIEW_CONTROLLER, and I'm getting the reference through
    mo_owner ?= owner. (since mo_owner = owner is not getting converted of type mo_owner ). After doing this on whatever the contexnode class (say zl_xxxx_xxx_cnxx) the corressponding context node values are getting turned as  <#ERROR IN METADATA.
    I mean when I'm checking the configuration in bsp_wd_cmpwb configuration tab -> Available Fields->Enlarge the contex node->BTSTATUS (say for Example) there the values are showing as <#ERROR IN METADATA , After executing the above procedure
    I cross checked several times before and after redefining the context node method IF_BSP_MODEL~INIT, before redefining this method UI is working fine, after redefintion UI is throwing below error .
    Exception Details
    CX_SY_REF_IS_INITIAL - Dereferencing of the NULL reference
    Method: CL_BSP_MODEL=>IF_BSP_MODEL_BINDING~IS_ATTRIBUTE_VALID
    Source Text Row: 13
    Thanks & Regards
    Rajasekhar

  • TS1347 I have a iPhone 4 and I use a hotmail email account. Recently it's not been notifying me of me of emails. I've checked notification settings all set to get them but when you look at overview of notifications the email ones not shown like other apps

    I have a iPhone 4 and I use a hotmail email account. Recently it's not been notifying me of me of emails. I've checked notification settings all set to get them but when you look at overview of notifications the email ones not shown like other apps do? Can anyone help its driving me mad?

    I had the same issue.  I just went to the Apple Store today to talk to someone about it.  They had me delete the account and then add it back in.  It's been working fine ever since!

  • Who can tell me how to use ni-imaq functions imgSessionSerialWrite and imgSessionSerialRead to set and get my carema attribute?

    Who can tell me how to use ni-imaq functions imgSessionSerialFlash,imgSessionSerialWrite and imgSessionSerialRead to set and get my carema attribute?
    My camera is duncantech ms3100 and the frame grabber is pci-1428.I use ni-imaq2.6.When I use these functions,it tell me error -1074397163(IMG_ERR_BINT:Bad interface) .

    I have the same problem on my IPAD 2. One calender that i cant delete or find any settings for... Its just in the calender app under diffrent calenders.  how do i delete it?

Maybe you are looking for