Internal Table related query

Hi Guys,
              I have a 1st Internal Table with all shipments details.
I have 2nd internal table shipments details along with pallets details.
My 2nd Internal table looks like below.
PN TKNUM
1       1144
2       1144      and many more than this
3       1145
4       1145
I need to calculate that TKNUM 1144 has total 2 PN's and TKNUM 1145 has total 2 PN's
Thanks,
Prasad.

Hi Avinash,
                  Its not working.
Let me give my internal table details once again.
PN               TKNUM
8              |0000001144
8              |0000001144
8              |0000001144
8              |0000001144
7              |0000001144
7              |0000001144
7              |0000001144
7              |0000001144
I need to get count as 2 for TKNUM .
Plz can you let me know.
Thanks,
Prasad.

Similar Messages

Import internal table from query to report

Hi,
I have to import an internal table% G00 with its contents from a query in a custom report. I use the import statement but I do not acknowledgment the table. You can help me.
thanks

Hi,
standard program behind the query does not have any EXPORT statement statement behind it so it does not make sense to IMPORT. It'll never IMPORT.
You can use the following way:
 SUBMIT (report_name) USING SELECTION-SCREEN <sel_screen_number> EXPORTING LIST TO MEMORY AND RETURN.
and then use
CALL FUNCTION 'LIST_FROM_MEMORY'
 TABLES
 listobject = list_tab
 EXCEPTIONS
 not_found = 1
 OTHERS = 2.
IF sy-subrc = 0 AND list_tab IS NOT INITIAL.
 CALL FUNCTION 'LIST_FREE_MEMORY'.
 CALL FUNCTION 'LIST_TO_ASCI'
 TABLES LISTOBJECT = list_tab
 LISTASCI = output.
 FREE MEMORY ID '%_LIST'.
ENDIF.
output is your output table.

Internal Table dynamic query

Hello,
I have an internal table which needs to be queried with set of attributes which change dynamically. How can I do it?
Eg: Internal Table i_tab contains attributes a,b,c,d,e etc... Now I should extract a single line from the table based based on the values I supply for the attributes.
Say if I give a=23 b='' c='abc' d='' e=''. Then the query should be able to return be the line where all the initial field attributes (here in this case b,d, and e) should not be considered for the query.
It shoud be
read table i_tab with key a= 23 c='abc'.
The next time a query can be shooted with the foll values
a='' b='SAP' c='ERP' d='' e=''.
Then the query shd be
read table i_tab with key b= 'SAP' c='ERP'.
In short can I get the functionality of the "select statement dynamic search string"?
select * from tab where ( search string ) .
and search string would be generated dynamically based on the inputs?
I would be really thankful if you can provide me an immediate answer.
Thanks and Regards,
Sandhya

I think one of the simplest way is to define ranges for the variables a, b, c, d and e.
ranges : r_a for a, r_b for b...r_e for e.
refresh : r_a, r_b, r_c, r_d, r_e.
clear : r_a, r_b, r_c, r_d, r_e.
if a is not initial.
 r_a-sign = 'I'.
 r_a-option = 'EQ'.
 r_a-low = value.
 append r_a.
endif.
....similarly build for b, c, d and e.
Loop at itab.
check itab-a in r_a.
check itab-b in r_b.
check itab-e in r_e.
move-corresponding itab to urval.
exit.
endloop.

Internal table select query

Hi Experts,
I have one internal table with some values like
PLNNR           PLNAL                ZAEHL
5000021            01                      01
5000021            01                      02
5000021            01                      03
5000021            01                      04
5000021            01                      05
I want to fetch greatest value from ZAEHL column.
Can any one pls help me.
Thanks,
Madhu.

Hi Gordan,
I am getting error like " itab is not defined in the ABAP Dictionary as a table , projection view or database view."
Can you pls guide me .
Thanks,
Kaladhar.

Internal tables & select query for clasical report

hello all,
 i am a novice in ABAP.i need to retrive data from 4 DB tables to do a classical report. i declared internal tables as below and then retrieved the data as per the below select statements. is there any other way in which i can do the same with a comparitively lesser amt of code.
data: begin of i_vbak occurs 0,
 vbeln like vbak-vbeln,
 kunnr like vbak-kunnr,
 waerk like vbak-waerk,
 end of i_vbak.
data: begin of i_vbap occurs 0,
 vbeln like vbap-vbeln,
 kwmeng like vbap-kwmeng,
 posnr like vbap-posnr,
 vrkme like vbap-vrkme,
 netpr like vbap-netpr,
 end of i_vbap.
data: begin of i_lips occurs 0,
 vbeln like lips-vbeln,
 vgpos like lips-vgpos,
 vrkme like lips-vrkme,
 lfimg like lips-lfimg,
 end of i_lips.
data: begin of i_vbep occurs 0,
 vbeln like vbep-vbeln,
 posnr like vbep-posnr,
 edatu like vbep-edatu,
 end of i_vbep.
data: begin of i_out occurs 0,
 kunnr like vbak-kunnr,
 vbeln like vbak-vbeln,
 kwmeng like vbap-kwmeng,
 netpr like vbap-netpr,
 waerk like vbak-waerk,
 vrkme like vbap-vrkme,
 lfimg like lips-lfimg,
 posnr like vbep-posnr,
 edatu like vbep-edatu,
 end of i_out.
 RETRIVING THE DATA INTO INTERNAL TABLE *
select vbeln kunnr waerk from vbak into table i_vbak where kunnr in
s_kunnr and vbeln in s_vbeln.
select vbeln kwmeng posnr vrkme netpr from vbap into table i_vbap for
all entries in i_vbak where vbeln = i_vbak-vbeln.
select vbeln vgpos vrkme lfimg from lips into table i_lips for all
entries in i_vbak where vbeln = i_vbak-vbeln and vgpos in s_vgpos.
select vbeln posnr edatu from vbep into table i_vbep for all entries in
i_vbak where vbeln = i_vbak-vbeln.
Points are guaranteed for good answers.
Thanks in advance
seenu

Hi,
If u will use in ALV means how many tables u want u can put it. After that u can maintain one internal table that's enough. Afterthat put select queries after that display the internal table fileds.
If u will ALV report means u have to code same coding for every report slight changes only there.
Herewith i am sending sample ALV REPORT it is useful for u.
REPORT CODING:
REPORT YMS_COLOURALV NO STANDARD PAGE HEADING.
TYPE-POOLS: SLIS, ICON.
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: BEGIN OF IMARA OCCURS 0,
 LIGHT(4) TYPE C,
 MATNR TYPE MARA-MATNR,
 MTART TYPE MARA-MTART,
 MAKTX TYPE MAKT-MAKTX,
 COLOR_LINE(4) TYPE C,
 TCOLOR TYPE SLIS_T_SPECIALCOL_ALV, "cell
 END OF IMARA.
DATA: XCOLOR TYPE SLIS_SPECIALCOL_ALV.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM WRITE_REPORT.
Get_Data
FORM GET_DATA.
WRITE ICON_GREEN_LIGHT AS ICON TO IMARA-LIGHT.
 IMARA-MATNR = 'ABC'.
 IMARA-MTART = 'ZCFG'.
 IMARA-MAKTX = 'This is description for ABC'.
APPEND IMARA.
WRITE ICON_YELLOW_LIGHT AS ICON TO IMARA-LIGHT.
 IMARA-MATNR = 'DEF'.
 IMARA-MTART = 'ZCFG'.
 IMARA-MAKTX = 'This is description for DEF'.
APPEND IMARA.
WRITE ICON_RED_LIGHT AS ICON TO IMARA-LIGHT.
 IMARA-MATNR = 'GHI'.
 IMARA-MTART = 'ZCFG'.
 IMARA-MAKTX = 'This is description for GHI'.
APPEND IMARA.
LOOP AT IMARA.
 IF SY-TABIX = 1.
 IMARA-COLOR_LINE = 'C410'. " color line
 ENDIF.
 IF SY-TABIX = 2. " color CELL
 CLEAR XCOLOR.
 XCOLOR-FIELDNAME = 'MTART'.
 XCOLOR-COLOR-COL = '3'.
 XCOLOR-COLOR-INT = '1'. " Intensified on/off
 XCOLOR-COLOR-INV = '0'.
 APPEND XCOLOR TO IMARA-TCOLOR.
 ENDIF.
 MODIFY IMARA.
ENDLOOP.
ENDFORM. "get_data
WRITE_REPORT
FORM WRITE_REPORT.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV.
LAYOUT-COLTAB_FIELDNAME = 'TCOLOR'.
LAYOUT-INFO_FIELDNAME = 'COLOR_LINE'.
PERFORM BUILD_FIELD_CATALOG.
CALL ABAP LIST VIEWER (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 IS_LAYOUT = LAYOUT
 IT_FIELDCAT = FIELDCAT
 TABLES
 T_OUTTAB = IMARA.
ENDFORM. "write_report
BUILD_FIELD_CATALOG
FORM BUILD_FIELD_CATALOG.
DATA: FC_TMP TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
CLEAR: FIELDCAT. REFRESH: FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Status'.
FC_TMP-FIELDNAME = 'LIGHT'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '4'.
FC_TMP-ICON = 'X'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Number'.
FC_TMP-FIELDNAME = 'MATNR'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '18'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Type'.
FC_TMP-FIELDNAME = 'MTART'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '10'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material'.
FC_TMP-FIELDNAME = 'MAKTX'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '40'.
FC_TMP-EMPHASIZE = 'C610'. " color column
APPEND FC_TMP TO FIELDCAT.
ENDFORM. "build_field_catalog
Thanks,
Shankar

Loan table related query wat r the table for loan related

Hi ,
Can anybody tell me the tablename and field name for 'loan start date" and "monthly payment".It shoulb be connected to VKONT form table fkkvkp.I have tp pass this vkont(contract account number and on the basis of it have to find the loan start date and monthly payment.

Hello,
If you want to know it you could use SDK help files, there could be available the info about the table. Where will be the text used ? I mean do you want to know from what table you can obtain the text ? If yes, One table I know is POR10. The table is used for text in purchase order.
Rgds,

Internal table Memory Issue Exception TSV_TNEW_PAGE_ALLOC_FAILED

Hi experts,
I am working on a conversiojn programme. This programme is dealing with 4 input files.
Each of these files is having more than 50,000 records. I am reading the corresponding application server files to fill
the internal tables related to these files.
The files are being read properly and internal tables are being filled.
However when i try to assign any of these 4 internal tables to other temproray internal tables in programme(requirement)
i get a dump TSV_TNEW_PAGE_ALLOC_FAILED.
The dump is related to memory issue.
I think The memory available in the programme at this point is not sufficient for table assignment.
Please suggest any alternatives where i can save any memory .
Changig of basis setting is not an option.
Regards,
Abhishek Kokate

Hi Kiran,
I am not agree with you , I am agree with Hermann.
While writting file you restrict the record max 5,000 to 10,000 records and process don't store the mutch data into internal table.
After every used refresh the internal table, Declare table where necessary.
But you can try to avoid the copy cost.
Rgds
Ravi Lanjewar

Query related to Internal Table

Hi ,
I have a small query related to internal table , can we dump millions of records to an internal .
The actual requirment is like i need to develop a report in BI side where i have to dump records into an internal table from PSA tables without filtering .
Can we do so ....
or do we have any other option to dump the data to an internal tables .
need some tips on the same .
Thanks ,
VInay.

Hello Vinay,
I believe the following extract will give you a brief idea on the size limitations for an internal table.......
Internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries.
Hope it proved useful
Reward if helpful
Regards
Byju

How to fetch the data from query to internal table ?

Dear all ,
I would like to fetch the query data(sq01) into my internal table ? is it possible to do that ?
Best Regards,
Carlos

Hi
Try this RRW3_GET_QUERY_VIEW_DATA
Also, you can have a look at this...
<a href="/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-ii Query results into Internal table</a>
Regards
Raj

Dynamic query in where clause while looping in an internal table.

Hi,
Had a small question : How can i make a dynamic query for the WHERE clause while looping at an internal table.
i want to implement a dynamic where clause query for the below example.
it_cfx_col is an internal table and wa_cfx_col is a work area for it_cfx_col
DATA :
i_cfx_col TYPE TABLE OF cfx_col,
wa_cfx_col LIKE LINE OF i_cfx_col.
DATA : count TYPE i VALUE 0.
DATA : l_where_clause TYPE string,
         l_where_clause2 TYPE string,
         l_name type string.
l_name = 'NANDANOM'.
l_scenario = 'collaboration'.
LOOP AT it_cfx_col INTO wa_cfx_col
WHERE CREATED_BY = l_name
AND SCENARIO = l_scenario.
count = count + 1.
some business logic implemented using the work area wa_cfx_col
endloop.
Now i want to write a dynamic query for the where clause.
DATA : count TYPE i VALUE 0.
DATA : l_where_clause TYPE string,
         l_where_clause2 TYPE string,
         l_name type string.
l_name = 'NANDANOM'.
l_scenario = 'collaboration'.
l_where_clause = 'CREATED_BY = l_name'.
l_where_clause2 = 'AND SCENARIO = l_scenario'.
if l_scenario is not initial.
CONCATENATE l_where_clause l_where_clause2
INTO l_where_clause SEPARATED BY space.
endif.
LOOP AT i_cfx_col INTO wa_cfx_col
WHERE (l_where_clause).
count = count + 1.
some business logic implemented using the work area wa_cfx_col
endloop.
when i compile this i get an error message as { Statement concluding with "...(l_where_clause)" ended unexpectedly}
Even i changed the initilization of the variable l_where_clause2 to [ l_where_clause2 = 'AND SCENARIO = l_scenario.'. ]
added the end of line demarkation ".", but still i got the same error message.
Is it a limtation in ABAP that i cannot write a dynamic query for the where clause while looping at an internal table?
Regards,
om

Hi savita,
there in no such 1 limitaion in abap for dynamic query .. i think the error meassge is only beacuse of your synatx delcartaion.
>> LOOP AT i_cfx_col INTO wa_cfx_col
   WHERE (l_where_clause).
   count = count + 1.
some business logic implemented using the work     area    wa_cfx_col
   endloop.
afted delclarataion also , in the where statement you should specify both the field name and value bname
   LOOP AT i_cfx_col INTO wa_cfx_col
   WHERE l_where_clause = 'CREATED_BY = l_name' .
   count = count + 1.
hope it helps.
regads
priya.

SAP QUERY LOOPS AND INTERNAL TABLE

Hi All, I have a query which i have made. It runs from Table EKPO which has PO details and what I want to do is now via ABAP Code pull through the total of goods receipt for the PO and Line Item into a field. Sounds Easy enough..Problem now,
The table which contains the GR data is EKBE which agains a PO and Line Item can have many 101 movements and 102 movements so what I want is an ABAP Statent to basically sum up the total of 101 for the PO & LINE ITEMS and then minus this from the total of 102 for the PO & LINE ITEMS and post the result in to this new field I have created.
I am pretty decent with ABAP Code in Querys I.e Select statements etc but from what I can see i need to create an internal table and do a loop and collect statement but I keep on failing due to not enough knowledge. Please can some one help me with this and provide me with the code and explanation as i would like to understand,
POINTS WILL BE REWARDED
Thanks
Kind Regards
Adeel Sarwar

Hi,
This is the full code i have entered but its not working. Any help would be appreciated. If you could rectify the code and internal tables that would be great.
Thanks
TABLES: EKBE.
DATA: PurO LIKE EKPO-EBELN,
      POLI LIKE EKPO-EBELP.
*New Table and Vars defined
DATA:   BEGIN OF IT_EKBE,
          IT_EKBE LIKE EKBE,
        END OF IT_EKBE.
DATA: BEGIN OF IT_SUM OCCURS 0,
          EBELN TYPE EBELN,
          EBELP TYPE EBELP,
          DMBTR TYPE DMBTR,
          MENGE TYPE MENGE,
      END OF IT_SUM.
CLEAR: QTYD.
MOVE: EKPO-EBELN TO PurO,
      EKPO-EBELP TO POLI.
SELECT * FROM EKBE INTO IT_EKBE
    WHERE EBELN = PurO
    AND   EBELP = POLI
    AND   BEWTP = 'E'
LOOP AT IT_EKBE.
MOVE CORRESPOING IT_EKBE TO IT_SUM.
IF IT_EKBE-BWART = '102'.
    IT_SUM-DMBTR = IT_SUM-DMBTR * -1.
    IT_SUM-MENGE = IT_SUM-MENGE * -1.
ENIDF.
COLLECT IT_SUM.
CLEAR IT_SUM.
ENDLOOP.
ENDSELECT.
If sy-subrc = 0.
QTYD = IT_SUM.
ELSE.
QTYD = 0.
ENDIF.

Internal table in ABAP Query

Hi all,
Can we use internal table in ABAP/SAP Query (Infoset - SQ02)? If yes, Pls guide me on the same.
Thanks in advance
Regards
Madhumathi A

to my knowledge u can't use internal tables in ABAP query...it is a mix of tables...

All line items related internal table or structure in f-44 Transaction

Hi All,
In F-44 Transaction once i will give Vendor number then i press enter then all related documents will come. I need that related internal table before display of documents. I have to change some values in those documents. I found one internal table i.e. POSTAB. And I made changes. But is not effected and not helpful for my requirement.Please tell me exact internal table before those values come .
If there is any Enhancement Spot or User Exit of that related Line items Values.
Regards
Nageswar

Dear Kavana,
In almost all situations the reason to your this issue can be found in
notes 136754 or 152813.
Mostly, the documents are included in a payment proposal and will
therefore not show up in F-44.
You can check which items are blocked by payment proposal in two
ways:
In table REGUP (Processed items from payment program), you can check
which items are blocked by payment proposals (display via SE16 or SE17,
selection on vendor (LIFNR), company code (ZBUKR) and document number
(BELNR).
I hope this can help You.
mauri

Saving query view in a internal table

Hello Experts,
Is there anyway that we can trasfer all the query results to a table.
What I am exactly looking is
I want to transfer a query view to an internal table so that our destop team using java will then read the results from tables and convert to desirable format ( email, pdf etc)
Please help me out to sort this issue as this became one of the major issues to be fixed.
All inputs are much appreciated.
Thanks and Regards
Harish Mulaka

Hello Sachin and Riccardo,
Thank you very much for taking time to reply my question.
Could you please elobarte on sending query output into PDF format.
Riccardo,
when performing an extract of a query with table option in RSCRM_BAPI.. In which table it stores the information and where can I find the results
Can you please provide me if you have any document on RSCRM_BAPI
Thanks and Regards,
Harish

Internal table with same variable and one select query

Hi,
I am a new bee here with may be a silly question.
I have a internal table as below.
DATA: BEGIN OF IT_ORDERDETAILS OCCURS 0,
 VBELN LIKE VBAK-VBELN, "Order number
 BSTNK LIKE VBAK-BSTNK, "customer PO
 ERDAT LIKE VBAK-ERDAT, " Order created date
 MATNR LIKE VBAP-MATNR, "Sales order line item
 KWMENG LIKE VBAP-KWMENG, "Quantity
 D_VBELN like likp-vbeln, " delivery no
 POSNR like lips-posnr, " delivery item
 KUNNR LIKE LIKP-KUNNR, "ship quantity
END OF IT_ORDERDETAILS.
Where VBELN field is in VBAK and LIKP table.
VBELN in VBAK table = order #
VBELN in LIKP table is = Delivery #
I want to use join to fetch data in single select query.
Below is the select query
SELECT VBAK~VBELN
 VBAK~BSTNK
 VBAK~ERDAT
 VBAP~MATNR
 VBAP~KWMENG
 likp~vbeln
 lips~posnr
 LIPS~VGBEL
 INTO (IT_ORDERDETAILSvbak, IT_ORDERDETAILSbstnk, IT_ORDERDETAILSerdat, IT_ORDERDETAILSmatnr, IT_ORDERDETAILSkwmeng, IT_ORDERDETAILSd_vbeln,IT_ORDERDETAILSposnr, IT_ORDERDETAILSkunnr)
FROM VBAK left outer JOIN VBAP ON ( VBAKVBELN = VBAPVBELN )
left outer JOIN LIPS ON ( VBAKVBELN = LIPSVGBEL )
join LIKP on ( LIPSVBELN = LIKPVBELN )
WHERE VBAK~ERDAT IN CR_DATE.
I am getting error in the query.
Please suggest.
Thanks,
Rajesh

Hi rajesh.nayakbola,
although this is not quite the right place for this, let me give you some notes:
1. Code should be
formatted as code
by markin it with mouse and use above <> button.
2. Internal tables shoult not be declared using OCCURS clause - this is last century style
3. Internal tables do not need and should not have a header line, they should use TYPES for declaration
4. Data should not be declared using LIKE: If they refer to dictionary TYPES, use TYPE. LIKE is only mandatory for data objects declared in your program, i.e. DATA IT_some_ORDERDETAILS like IT_ORDERDETAILS.
5. If you get an error here, never write "I am getting error" but copy and paste the error message fully.
- The fields in brackets in the INTO clause never have ~ character, there is no IT_ORDERDETAILS~vbak, only IT_ORDERDETAILS-vbeln
It could be something like this:
TYPES:
BEGIN OF TY_ORDERDETAILS,
VBELN TYPE VBAK-VBELN, "Order number
BSTNK TYPE VBAK-BSTNK, "customer PO
ERDAT TYPE VBAK-ERDAT, " Order created date
MATNR TYPE VBAP-MATNR, "Sales order line item
KWMENG TYPE VBAP-KWMENG, "Quantity
D_VBELN TYPE likp-vbeln, " delivery no
POSNR TYPE lips-posnr, " delivery item
KUNNR TYPE LIKP-KUNNR, "ship quantity
END OF TY_ORDERDETAILS.
DATA:
IT_ORDERDETAILS TYPE TABLE OF TY_ORDERDETAILS.
SELECT VBAK~VBELN
VBAK~BSTNK
VBAK~ERDAT
VBAP~MATNR
VBAP~KWMENG
likp~vbeln AS D_VBELN
lips~posnr
LIKP~KUNNR
INTO CORRSPONDING FIELDS OF TABLE IT_ORDERDETAILS
FROM VBAK left outer JOIN VBAP ON ( VBAK~VBELN = VBAP~VBELN )
left outer JOIN LIPS ON ( VBAK~VBELN = LIPS~VGBEL )
join LIKP on ( LIPS~VBELN = LIKP~VBELN )
WHERE VBAK~ERDAT IN CR_DATE.
Regards,
Clemens

Internal Table related query

Similar Messages

Maybe you are looking for