Internet and data not working after iOS 7 upgrade

Help! Still no internet after the ios7 upgrade. Apple has told me many things. Have restored network settings, done a hard refresh, back up and restored. Try the sim in another phone (internet worked). Take to an apple store (3.5hrs away thanks but no thanks). Can Anyone help?

Have you tried restoring as a new device (not from a backup)?

Similar Messages

  • Internet and more not working after upgrading to iOS 8

    After upgrading to IOS8 - I had multiple issues
    Network Connection is shotty and disconnects after clicking few sites
    Email gets stuck
    There is some sort of a bug(s) system is not stable.
    Safari is not working
    Apple needs an update or patch very soon.

    Sept. 22, 2014 Hello everyone finally a solution - The issue is with the 5GHZ networks.  Reset your network of your IPAD and/or IPHONE and connect to your slower 2.4GHZ network - So far issue is fixed but for gamers and serious bandwidth absorbers, it might be a disappointment with the 2.4GHZ.
    Let's face it, it's better than the sporadic network drops.
    My Movie connection was uninterrupted.

  • Facetime, iMessage, and Mail not working after iOS 6.1.3 update

    I've had my iPod touch 4th generation since Oct 2010 and never updated the iOS until very recently. Before the update, Facetime worked consistently and easily. After I finally got around to updating my iOS a week ago, my iPod has come into severe issues.
    99% of the time, I cannot send or receive Facetime calls. If I try to make a call, it doesn't make the dial tone and eventually it just says "Connection Lost". Nothing happens if someone is trying to send me a call. I only Facetime with my boyfriend and his iPod hasn't changed since Facetime was last working. HIs other iPod is also updated with iOS 6.1.3.
    I never used iMessage before the iOS update, but because it says on Apple support that it uses push notifications like Facetime does, so I tried it. Most of the time, I cannot send or receive messages. I rarely used Mail before the update, but I never had a problem with it. Now, when I enter my gmail password, it keeps saying my username and password are not correct, even though I haven't changed my credentials.
    I only use my iPod for Facetime, iTunes, and Pandora. I don't need iMessage or Mail, but I am testing with those to see if this can help find the root cause of the problem. Pandora works smoothly so I know it's not a wifi connection issue. I have searched for remedies on end and tried:
    1.  Reset, turn off/restart, turn Facetime on and off, etc.
    2. Changing the DNS server address to 8.8.8.8, which made Facetime work normally for one time and never again
    3. Updating my Apple ID password online, then signing out and signing back in
    4. Creating another Apple ID with my other gmail account. Maybe 1 out of 10 Facetime call attempts, I can generate the dial tone, but when my boyfriend clicks to receive the call, it says that I am unavailable. iMessage has about the same success rate. It seems when I miraculously can send or receive texts through iMessage, I can manage to get the dial tone when I try Facetime, though the call cannot go through.
    This is of course extremely frustrating and I highly regret the update now. I was hoping for an improved iPod after the update, and now I have a near-dud! I did make sure to check my location and date and time, and both are correct (US, Central time). Any help would be greatly appreciated. Thank you.

    I spoke too soon. I tried Facetime again last night and had the same problems. Another factory reset did not work. I think it may be time to just call Apple support.

  • Zone Base Forewall for VPN connections does not work after IOS upgrade

    Hi all,
    We use cisco router 2911 as corporate gateway - there is Zone Based Firewall implemented - I upgraded IOS to last version (15.2(2)T1) - originaly version 15.1(4)M1 - to solve issue with Anyconnect connections (bug CSCtx38806) but I found that after upgrade the VPN users are not able to communicate with sources in other zones.
    More specific
    WebVPN use this virtual template interface
    interface Virtual-Template100
    description Template for SSLVPN
    ip unnumbered GigabitEthernet0/1.100
    zone-member security INSIDE
    There are other zones VOICE, LAB, ...
    In the policy any connection is allowed (used inspection of icmp, tcp and udp) from INSIDE zone to VOICE or LAB zone
    After VPN connection I am able to reach resources in INSIDE zone (which is the most important), but not in other zones. Before upgrade it worked.
    Once I changed zone in Virtual-Template interface to VOICE, I was able to reach sources in VOICE zone but not in any other. I searched more and found the stateful firewall is not working for connections from VPN as ping is blocked by policy on returning way - it means by policy VOICE->INSIDE, once I allowed communication from "destination" zone to INSIDE zone - the connections started to work, but of cause it is not something I want to setup.
    Does anybody has the same experiance?
    Regards
    Pavel

    It seems to me I should add one importatant note - if client is connected directly in INSIDE zone, he can reach resources in other zones without any issue - so the problem is only when the client is connected by VPN - not in ZBF policy setup.
    Pavel

  • HCM Processes and Forms not working after SP Upgrade

    Hi Friends,
      We recently upgraded our Service pack level of ABAP and Basis.SAP_BASIS -   from SAPKB70016 to SAPKB70019
    SAP_ABA    -   SAPKB70016 to SAPKA70019. Prior to the the SP upgrade everything was working fine. After the upgrade we are having the following issues.
    1. In Portal after opeing the Adobe form, If the move the cursor to the top portion of the form where we can add the attachment("Add attachment" button), the cursor always turns into the wait symbol and we are not able to attach anything into the form.
    2. In a separation form the Date field is an input field and even if the user enters a different date  the system takes the current date. The user also selected the separation reason from dropdown menu, but no display in form.
    3. Transfer form is having the following issue:When initiating the form the u201Csendingu201D manager must input the personnel number (identical to the user ID) of the u201Creceivingu201D manager. This way, once submitted by the sending manager, the system can determine the next agent in the process.Recently, that form has stopped working and the value entered by the sending manager is no longer recognised and the system issues the error message  u201CEnter the system user name of the manageru201D.
    Please help if you have any hint.

    Resolved after consulting with OShttps://forums.sdn.sap.com/questions.jspaS

  • Spotlight and finder not working after Yosemite upgrade

    Hi,
    I just upgrade to 10.10.1 from 10.8 on a Mid 2012 Retina macbook pro, 2.7Ghz i7, 16GB RAM, 750GB SSD drive.
    Since upgrading spotlight and finder have stopped working.  When I first upgraded I noticed it worked very briefly and found some of my applications, but now nothing.  The only thing it does is find the definition of the word I am searching for,
    I have
    gone in to sys pref > spotlight added and remove all folders and rebooted the machine
    gone in to sys pref > spotlight > privacy tab and ensured no folders are in that pane
    gone in to sys pref > spotlight > privacy tab and added "documents folder" closed sys prefs rebooted and then removed "documents" folder to try and trigger a re index
    gone to terminal and typed "sudo mdutil -E /" which should erase and rebuild the index but i get the error back "Error: Index is already changing state.  Please try again in a moment"
    gone to terminal and typed "sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist" and then typed "sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist"
    go to disk utility and verified my disk which comes back as showing no errors
    logged in as another user but spotlight and finder still not working
    Any other ideas my laptop is useless for work if I can't find anything,
    Thanks

    unfortunately I this is still not working, thanks for the link Eric i tried those options, but still the problem remains.
    I can clear the cache and re index my mac, and while the system is re indexing spotlight works and I can find material during the reindex.  This is obviously limited to the files that have been indexed at the point of using spotlight.
    Once indexing has finished if I go to spotlight and try to search for anything, there are no results only the dictionary appears.
    At the moment I have to delete the index cache every morning to trigger a re index so I can work, this is terrible and the worst upgrade experience I have had with any OS mac or windows

  • IPhone5 rear-facing camera and flashlight not working after iOs 7.0.3 update

    This is my first time posting here so do forgive me if I leave anything out.
    Problem 1
    I updated my iPhone 5 to iOs 7.0.3 (on 10/22 when it released). Since then, my rear-facing camera has stopped working. When I open up the camera, it's just a black screen and I cannot take a picture or video, but the other elements on the screen are still functional: changing flash from auto/on/off, turning HDR on/off, switching from video/photo/square/pano, but still the screen remains black. When I switch to the front-facing camera though, it works fine. I can take pictures and video through that view.
    Problem 2
    The second problem that's happened as well is the flashlight in the control center is greyed out, can't click it at all.
    Attempt to Fix
    I brought my iPhone 5 to a Genius Bar. Guy took it to the back to open it up and check if there were any physical problems with the phone and camera. He came back, found nothing. Unfortunately my phone was no longer under the one-year warranty, so in order to fully replace the phone with a new or refurbished one, I would've had to dish out $200 something and I wasn't trying to do that just yet. So we decided to just wipe it clean and restore. After we did that, everything was working, the rear-facing camera, the flashlight, things were perfect. I left the Apple store, got on the train to head home. I opened up the camera to take a picture and long behold, it stopped working again. I got home and did the exact same thing the guy did, wiped my phone and restored. Everything was working again. I held my breath though... 1/2 hour later, same problems with the rear-facing camera and flashlight came back.
    Just as a note, not sure if it helps, when I use third-party camera apps/photo editors, when I try to use the camera within those apps, it freezes and closes.
    I don't know what else to do. It seems the only fix is restoring my phone and having the camera and flashlight work for a few minutes only to go back to the same problems. The Genius Bar didn't help. I'm not trying to give up $200 something when this is something that happened clearly because of the iOs 7.0.3 update. It was working perfectly fine before that.
    Any help is appreciated! Thanks!

    WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

  • Entune not working after iOS upgrade

    When we first got our Camry Hybrid with Entune, we could use Pandora with my iPhone 4. Now everything links up and appears to be OK, but the sound does not come through. My iPhone 4 is running iOS 6.0.1 (10A523). My son's iPhone 4 is running iOS 5.0.1 (9A405) and Pandora works fine with his phone hooked up.
    How can I get my iPhone back to iOS 5.0.1 (9A405)?
    Thanks!

    Requirement to remedy
    (1) A supplier may comply with a requirement to remedy a failure of any goods to comply with a guarantee—
    (a) by—
    (i) repairing the goods (in any case where the failure does not relate to title); or
    (ii) curing any defect in title (in any case where the failure relates to title); or
    (b) by replacing the goods with goods of identical type; or
    (c) where  the supplier cannot reasonably be expected to repair the goods, by  providing a refund of any money paid or other consideration provided by  the consumer in respect of the goods.
    (2) Where  a consumer obtains goods to replace defective goods pursuant to  subsection (1), the replacement goods shall, for the purposes of this  Act, be deemed to be supplied by the supplier and the guarantees and  obligations arising under this Act consequent upon a supply of goods to a  consumer shall apply to the replacement goods.
    (3) A  refund referred to in subsection (1)(c) means a refund in cash of the  money paid or the value of any other consideration provided, or both, as  the case may require

  • ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

    ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

    Follow these steps:
    go to system preferences.. Open Network..
    CONFIGURATION: DEFAULT
    TELEPHONE NUMBER : #99*
    leave account name and password columns blank
    Now go to ADVANCED
    IN MODEM MENU
    VENDOR : GENERIC
    MODEL : GPRS / 3G
    Press ok
    Then CONNECT.. Enjoy.

  • IMessage not working after iOS 5.1 upgrade! Feedback pls

    iMessage not working after iOS 5.1 upgrade, anybody experiencing this as well? Feedback please......

    You shouldn't have to hard restart and it shouldn't have anything to do with your router.  If anyone else runs into this problem try resetting the network settings on your phone.  All the steps to do this can be found here http://tekshot5.com/ios-5-1-imessage-fix/
    Edit: Some of us don't have the option of resetting our DNS servers.  I run my own for example for caching purposes.

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • TS2621 why my outgoing mail server not working after ios 6 upgraded

    why my outgoing mail server not working after ios 6 upgraded

    Ask your carrier to send you the settings over wifi and then install them that way.
    I'm on giffgaff and I used the giffgaff app from the store to sort this out.
    Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
    Very Poor indeed and I held off using Apple products for years for this very reason!!

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

    My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

Maybe you are looking for