Internet Explorer 11 setup cannot recognize it's own /update-no switch?

Building a package with the Internet Explorer 11 Administration Kit (Internal Distribution) spits out
IE11-Setup-Full.exe (which seems to be an IExpress setup) and
IE11-Setup-Full.msi. IE11-Setup-Full.exe does not recognize the
/update-no switch. Is there any way either of these can be silently deployed
without checking for updates?

I've seen the command line reference.
If I pass /? to IE11-Setup-Full.exe (described as a Win32 Cabinet Self-Extractor), an
Internet Explorer 11 Setup dialog appears that displays this information:
Command line options:
/Q -- Quiet modes for package,
/T:<full path> -- Specifies temporary working folder,
/C -- Extract files only to the folder when used also with /T.
/C:<Cmd> -- Override Install Command defined by author.
Extracting IE11-Setup-Full.exe creates these files:
BRANDING.CAB
ieadvpack.dll
ieakcust.dll
iedkcs32.dll
IE-REDIST.EXE
iesetup.cif
IE-Setup.cmd
iesetup.ini
INSTALL.INS
If I pass /? to IE-REDIST.EXE, the Microsoft HTML Application Host produces an
Internet Explorer 11 Setup Command Line Switches window that displays the command line switches and their descriptions for Setup Modes (/quiet) and Help, Setup (/update-no), Restart (/norestart) and Miscellaneous Options.
Yes, I could use the extracted files from the customized Internet Explorer 11 package, but according to Microsoft Knowledge Base article 197147, IExpress packages support (as evidenced by the supported switches reported by IE11-Setup-Full.exe) switch
/c:path (specifies the UNC path and name of the Setup .inf or .exe file). In this article it is noted that you "can use the /c:path switch to pass parameters (switches) to the Setup program or specify a different Setup program for the package."
This example is given:
Ie6setup <IExpress switches> /c:" ie6wzd <Internet Explorer Setup switches>"
I've tried this:
<ParentFolderPath>IE11-Setup-Full.exe /q:a /c:"IE-REDIST.EXE /closeprograms /quiet /update-no"
But that doesn't work either. I'll probably try using the extracted custom package source later today so that I can access that
/update-no switch.

Similar Messages

I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

Setting Browser (Internet Explorer) setup as per my application to run on a new system

Hi,
I am using flex code to my project thats runs on Internet explorer after installing "Flash player plugin" and my application has POP Ups and it gets blocked by my browsers....We have to change our Internet setting as to allow all popups manually,
When i am running my application in a newly installed system with new browser,i should not change my browser setting as per i need to my application, it should automatically change its setting according to run my application i.e., installing flash player plugin and enabling popup blocker and so on.,
Is there any way to do this following in my code part as to change my browser setting according to my application.
Note : I have developed my application in J2EE with JSP and Flex Code.
i need to handle this issue on any part of this application,So please help me if any ideas to solve this
Thanks in Advance
With regards
Gopinath.A
Software Developer,
First Internet Systems Pvt Ltd.,
Chennai.

That's correct, but one of the great things about Flash/Flex is it makes it easy to create popups within the application that, while they don't overlay other windows in the system, aren't blocked by popup blockers.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Get Internet explore and Microsoft Office version from own PC

hi experts,
Is it possible to find out which version Internet Explore and Microsoft Office you have installed in your computer within an ABAP Program?
Is there a function module or a method to get out of these information from your computer?
Alternative is using some Java or Visual basic codes witin an ABAP program: if yes, please provide some example codes.
Best regards
LN

Nick & Manohar are right......This method is working.....I was just checking it out.....
On your PC, Goto START->RUN->REGEDIT
For MS Word
Goto HKEY_CLASSES_ROOT->Word.Document->CurVer
You will get a default registry value of type REG_SZ with value Word.Document.12
The last two digits indicate the version of MS word installed (Refer Microsoft Support link http://support.microsoft.com/kb/822005 )
Word 2010 14.0
Word 2007 12.0
Word 2003 11.0
Word 2002 10.0
Word 2000   9.0
For IE
Goto HKEY_LOCAL_MACHINE->Software->Microsoft->Internet Explorer
You will find a registry value of type REG_SZ with the version no of the installed component.
Now, in ABAP program call the method to get the current versions.....
DATA: v_ver_word TYPE string,
      v_ver_ie   TYPE string.
CALL METHOD cl_gui_frontend_services=>registry_get_value
EXPORTING
    root      = cl_gui_frontend_services=>hkey_classes_root
    key       = 'Word.Document\CurVer'
IMPORTING
    reg_value = v_ver_word.
CALL METHOD cl_gui_frontend_services=>registry_get_value
EXPORTING
    root      = cl_gui_frontend_services=>hkey_local_machine
    key       = 'SOFTWARE\Microsoft\Internet Explorer'
    value     = 'Version'
IMPORTING
    reg_value = v_ver_ie.

Internet Explorer 11 not opening iframes after KB3032359 update

Basically: Internet Explorer 11 not opening iframes(src is same program folder) after KB3032359 update. (Chrome or Firefox opens all iframes)
We have web solution on Windows 2008 .NET 4 version, wroten C# (Visual Studio 10). Program has left side menu (Panels, menu items have link button, link buttons onclick methods in .cs file. Onclick methods change center iframe source location. ( frm_center.Attributes.Add("src",
"page2.aspx") )
Microsoft publish some updates 11.03.2015 date. One update is (MS15-018 - Cumulative Security Update for Internet Explorer (3032359) - Critical - Remote Code Execution) for IE11 security fixes. Including one fix for iframe freaks.
After installed this update (Windows 7 Professional 64 bit) IE11 opening our web solution site, after login everything is ok (head section, left menu, center iframe are correct), but when clicking some item in left menu, iframe is not changing source location.
(1 day ago IE is ok, no problem).
Have idea for this iframe problem ?

We have noticed similar change in behavior with KB3032359.
Here is one such scenario where it is broken starting with this patch. It looks like plugins are no longer able to access various javascript objects when in compatibility mode.
Two things to start with:
1. The site is in compatibility mode
2. The Adobe SVG plugin is installed and being used.
The actual issue is in an much more complicated application that must be run in compatability mode with the Adobe SVG Plugin.
But here is the issue boiled down:
=================== test.html
===================
<HTML>
<script>
document.write('<frameset cols="50%,50%,0">');
document.write(' <frame id="test1" name="test1" src="javascript:false">');
document.write(' <frame id="test2" name="test2" src="javascript:false">');
document.write('</frameset>');
d = new Date() ;
window.frames['test2'].location ="test2.html?" + d;
</script>
</HTML>
=================== test1.html ===================
<body
bgcolor=green>
Expected test1
</body>
=================== test2.html ===================
<script>
function notify(evt){
alert(evt.target.id + " should now change frame 1 to test1.html") ;
parent.frames.test1.location.href = "test1.html" ;
</script>
<body
bgcolor="000077"
text="FFFFFF">
<embed
src="test2.svg"
width="100%"></embed>
test 2, has a SVG that calls back to this page, and causes frame 1 to change to test1.html
</body>
=================== test2.svg ===================
<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="100%" height="100%">
<ellipse onclick="parent.notify(evt)" id="svgOval"
cx="25%"
cy="25%" rx="24%"
ry="24%" fill="#000099" stroke="FFFFFF"/>
</svg>

After updating, Firefox won't connect to the internet. All websites timeout. Internet explorer works fine.

I started up my computer and opened up firefox. A box popped up that said firefox was updating. After updating was complete, firefox attempted to connect to my homepage, yahoo, but the connection timed out. I tried connecting to other websites and they also timed out. My internet connection is good because internet explorer works fine.

Common cause after upgrading/updating is that your security software (firewall) may not recognize the new version and may be blocking Firefox and/or plugin-container. Remove all permissions for Firefox and plugin-container from your firewall's programs permissions list, then start Firefox and go to any website and let it detect and set internet access permissions.
*See [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Windows failed to apply the Internet Explorer Zonemapping settings - the data was invald (event ID: 1085)

Hi All,
I have a large domain and a long list of websites that are trusted using the following group policy setting:
Administrative Templates > Windows Components > Internet Explorer> Internet Control Panel > Security Page >
Site to Zone Assignment List
On all (XP/vista/win7) workstations across the domain I'm getting the following error:
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Event ID: 1085
Task Category: None
Level: Warning
Keywords: Description: Windows failed to apply the Internet Explorer Zonemapping settings. Internet Explorer Zonemapping settings might have its own log file.
There's nothing either side of this error in the log that shines any more light on the issue.
I know which group policy object its applying these settings but cant find which of the entries in the site to zone assignment list is causing this issue. I looked in the
Group Policy/Operational log but all I see is the following entry which says "completed" but is logged as an error:
After some research I'm guessing that the issue is an incorrect wild-card. This is what my trusted sites list looks like (with names removed of course):
http://servername.*
*.internaldomain.com.au
*.domain.com.au
*.domain.*
*.externaldomain.com
*.domain.inernaldomain.com.au
*.domain.*
*.domain/name.*
*.domain.inernaldomain.au*
*.domain.com
Is there something obviously incorrect here?
Does anyone know where I could find an article that clearly outlines the acceptable wildcard syntax for the
"Security page\ site to zone assignment list" group policy? Ive read every forum post, website and blog I could find on the internet but nothing is clear and I wasn't able to find an MS document that steps it out. I've also changed the
existing list a number of times based on blog posts etc but had no luck.
**Please Note**
I dont want to change to a different method or have an intellectual debate re why I would have these sites/wildacrd/policy set. I'm really looking to see what entry is invalid and where the documentation is for this policy setting so i can make sure they are
always correct in the future.
thanks in advance for your time and assistance
Simone
PS: I've already read the following posts a number of times:
I get no data but have identified the GP that is causing the issue:
A test case for troubleshooting group policy application – Event ID 1085 and 7016 - http://blogs.technet.com/b/askds/archive/2008/08/21/a-test-case-for-troubleshooting-group-policy-application-event-id-1085-and-7016.aspx
I dont have any 2 letter domain names:
Problems Adding Top-Level Domains to Zone Sites List - http://support.microsoft.com/kb/259493
I tried formatting the list per this article:
[Solved] The Group Policy client-side extension Internet Explorer Zonemapping failed to execute - http://daily-it.blogspot.com.au/2008/09/solved-group-policy-client-side.html
Has no domain wildcard format info:
Behavior of Site to Zone Assignment List - http://blogcastrepository.com/blogs/mattbro/archive/2006/09/07/2183.aspx
Great article, no wildcard data:
Internet Explorer Policy Settings - http://technet.microsoft.com/en-us/library/bb457144.aspx
Internet zonemapping problem: http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/a8756a27-b562-42ad-8782-87d284e6bcfb/
Spiceworks Event 1085 (Warning) - http://community.spiceworks.com/windows_event/show/1582-microsoft-windows-grouppolicy-1085
Event ID 1085 — Application of Group Policy - http://technet.microsoft.com/en-us/library/cc727303%28v=ws.10%29.aspx
Application of group policy - http://technet.microsoft.com/en-us/library/cc727312%28v=ws.10%29.aspx
Evt ID 1085 GP client-side extension IE ZoneMapping failed to exec - http://www.winvistatips.com/evt-id-1085-gp-client-side-extension-ie-zonemapping-failed-exec-t706399.html
Event 1085 - Internet Explorer Zonemapping - http://www.minasi.com/forum/topic.asp?TOPIC_ID=29206
EventID.net - http://www.eventid.net/display.asp?eventid=1085&eventno=1412&source=Userenv&phase=1
Event ID 1085 - Internet Explorer Zonemapping failed to execute - http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/Q_24897522.html
UPDATE:
I disabled the original policy and created a new one with only one trusted site address in it. Then I logged into a clean test machine did some testing.What I found after a few hours of testing was; regardless of the site that I have listed in group policy
The HKCU\Software\Policies\Microsoft\Current version\Internet Settings\Zone Map Key registry entry is
always updated with that entry on the workstation. So the workstation's registry always updates the key with
*.sitename.com per the site that I have set in GP
If I run GPUPDATE /FORCE over and over again, on the same machine, under the same user account, using the same DC I get:
Failure, Failure, Failure, Success, Success, Success, Failure etc
I wasn't able to determine any pattern to the failures, I tried stopping some of the processes on that machine but didn't find anything that would make it fail/succeed reliably.
There is no AV or firewalls installed on my test machine
Anyone have any more ideas? I think I might install filemon and try to capture some more data unless there's a better tool?

Yes, and that's straight from my Microsoft TAM. As long as you include an asterisk inside those site-to-zone mappings, you'll continue to see them. The key is whether or not they're working. In my environment, I've seen complete success using the
http://*.domain.com, or
https://*.domain.com, no matter if the site is http://www.domain.com or
http://milk.does.a.body.good.domain.com. Despite the success, we continue to see the errors. It's much the same as Group Policy Preferences where you can apply a setting once, or repeatedly. If you apply
something repeatedly and it's already set, lookout for some complaints in the application log. It really is annoying. There's potential to play with the logging levels, but I'll admit that my experience ranks as "novice" in this specific section of group policy.
This link might get the creative juices flowing:
http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
I see you've already read a number of articles including "a test case for troubleshooting those event IDs"... I sympathize with your efforts. I despise warnings and errors that I can't solve or don't want to see, but I've researched a number of them to death
and found that many are simply "normal". Uggg... I hope this helps, but please take my advice, as with anyone else's out here, with caution. I've seen some crazy recommendations. I saw a recommendation to install SQL on a DHCP server to get failover clustering
up and running. I hope the guy asking for help didn't listen to that one! : ) - josh

Weird graphics and other issues with internet explorer in all versions.

One of our laptops has an issue with their Internet Explorer. First, whenever the user logs on and starts internet explorer and navigates to any website, the website loads for a bit but then immediately displays a "Page cannot be displayed" error.
Every single time. If we try browsing again/refreshing the page it loads fine. But during regular browsing, we might get that page again.
Another issue that happens is sometimes the graphics logos won't load properly. See screenshot:
http://i.imgur.com/0usOPpu.jpg
And this happens a lot. If this won't happen, the websites will only load with half its formatting missing.
Now we have:
-Thoroughly checked computer for viruses. Several full scans have been done with MalwareBytes with no issues found. Microsoft Security Essentials has been installed, full scan done, no viruses/spyware/adware found.
-We have tried upgrading to IE11. Same issue. Downgraded to IE10. Same issue. Downgraded to IE9, same issue yet again. IE was Reset each time.
We checked if it could be a network issue, but none of the other computers connected to the same switch has issue like that.
Any suggestions/ideas to try?

Hi,
I suggest you temporary disable antivirus and firewall, then check the result.
You may try the steps from the links below to check the issue:
"Internet Explorer cannot display the webpage" error
http://support.microsoft.com/kb/956196/en-us
Internet Explorer "Page Cannot be Displayed" error due to Bad Proxy Server Timeout
http://support.microsoft.com/kb/2551554
You may also refer to the computer or device manufacturer website and try installing the latest version of chipset, graphics card and video card drivers and check.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

Dreamweaver Internet Explorer problems

I am having the issue with my website, www.green-scouts.org, where it will view fine in Firefox and Safari but not in Internet Explorer. I am new to Dreamweaver so coding it foreign. Any suggestions would help. Thanks

All the images are CMYK JPGs which Internet Explorer does not recognize. Never use CMYK mode for web images. It's for print only.
Go back to your image editor (Photoshop?) and re-save them all as RGB JPGs (in Photoshop: Image > Mode > RGB Color)

Error internet explorer 9 later version exists internet exploxer 7

Getting an error when I try to upgrade Internet Explorer 9 on laptop HP Pavilion dv6 running Windows 7 64 bit SP1. Error message: there is a later version on computer???? Also having crashing issues when trying to run MMC snap-in

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

Error in Internet Explorer with Muse

I have an error in Internet Explorer and cannot seem to find the resolve in your Q&A databases. It is: museJSAssert: Error calling selector function:Error: Invalid argument; I have gone thru this website for answers (looked at the code thru a code editor and any broken links as per mentioned in posted discussions)... This site is live right now, it works in Safari, Chrome and Firefox. NEED HELP ASAP PLEASE!
I have periods instead of dashes in the phone numbers... could this be it? OR some of the page links are not active yet... I am guessing at this point as I am relatively new to web/muse design. Any help would be fantastic! Thank you very much! Oh, the website address is www.rubarb.ca (yes, that is spelled correctly)... THANKS AGAIN!

I've just run into this error as well. It only occurs when you have loaded your SWF into cache and you refresh the page. This error does not occur if the user opens a new tab and visits the site (even if the cache has that SWF). Right now, I am stumped on how to resolve this issue without the help of Adobe. There is a critical site launch that depends on BitmapData to work properly.
Adobe, I will also be posting this in your bug system.

Acrobat Professional 8.1 interface problem with Internet Explorer

After upgrading to the latest version of Internet Explorer, I cannot open or download Adobe files from online sources. The Adobe Acrobat program simply shuts down, and the following error message appears: "A serious error has been detected and Adobe Acrobat Professional 8.1.0 cannot continue. Please reinstall the application and try again." When using Google Chrome as a browser, the Adobe program works as intended. Any suggestions about how to remove this glitch from Internet Explorer?

The new version of IE was written years after the release of Acrobat Pro. You can try IE in compatibility mode to see if that helps. If not then either roll back to IE7 or right click to to a save as and open the file outside of IE.

Acroba X Pro And Internet Explorer 9

Hi, my question is if Acrobat X Pro is compatible with Internet Explor 9

Provided you apply the 10.1 update, yes it is.

Internet Explorer keeps shutting down

Hey
Im having a problem with Internet explorer at the moment. It keeps shutting down with the error message "Internet Explorer has stopped unexpectedly, window is searching for a solution"
This is happening at very frequently and im not even getting 2 mins of internet usage before it shuts down.
Im not very techy so any help would be much appreciated.
Cheers

Hi,
If you are working in older versions of Internet Explorer you are missing out on these new features and functions. If you don't spend too much time on the computer then you might not have to worry. But if the Internet is an important part of your everyday life, you will want to update your version of Internet Explorer.
To update Internet Explorer, follow these directions:
- Open up an IE browser.
- Select "Tools" and then open "Windows Update."
- Select "Custom."
- Make sure there is a check mark beside "Internet Explorer."
- Next, select "Review" and "Install Updates."
- Now you can close the browser.

Internet Explorer 11 setup cannot recognize it's own /update-no switch?

Similar Messages

Maybe you are looking for