Internet share stopped working after IOS7(iPhone)

Hey. Before i updated my iPhone4 to IOS7.0.2 it could easily use internet share to both my laptops. but now, i can only use to one of them.
Well.. if i'm lucky. i can for 3 minutes on the other. then it jumps off again. for like.. hours.. then it can be on 3 minutes again.
When i use "failuresearch" on my laptop it comes up with different things.
That i should try turn it off, that i should check if it's the right password, that i just can't connect and some other reasons.
I've tryed for weeks to make it work somehow now.. i and don't know what to do.
Hope any of you can help me!
Thank you!
-Patrick
Note: there is no problem connecting to wifi with the laptop i can't connect to my iphone with.
Message was edited by: The Patrick

Hey NickD227,
Thanks for the question, and great troubleshooting. Based on the information you have provided, it sounds like there may be some debris in your headphone jack - as the phone seems to think that something is plugged in.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
1. Verify that the volume is set to a level you would normally be able to hear.
2. Ensure that there is nothing plugged in to the headset jack or the dock connector.
3. If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
4. Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
5. If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
6. If the iPhone is paired with a Bluetooth headset or car kit:
          - Try turning off Bluetooth.
          - If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
7. Restart the iPhone.
8. If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
9. If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
If the issue persists, please follow the last step by contacting Apple Support for support and service options.
Thanks,
Matt M.

Similar Messages

  • USB hub and internet sharing stop working after sleep

    Hi,
    I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
    My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
    I have all the Mac updates installed.

    Thanks Barry.
    The hub is on its way to the manufacturer for after sales service...
    But the issue with AirPort remains the same, even after resetting SMC.
    Some clarification:
    * It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
    * The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

  • IMac 10.8 Internet sharing stopped working after upgrade from 10.7

    My iMac 27 (10.7) with Internet Sharing enabled has been working perfectly since last year. After upgrading to 10.8, I noticed the up arrow flashes and goes to regular WiFi mode. Stopping/starting the service causes the up arrow to flash again and immediately default to WiFi. I removed Ethernet and WiFi options from Network settings and re-installed which solved the Internet sharing from flashing and defaulting to WiFi mode. However, connecting to the Internet sharing from other devices (iphone/ipad) does not work and will not connect to the internet. On the iMac, I'm able to browse the Internet without issues.
    If I disconnect the Ethernet cable and plug into either my MacBook or MacBook Pro and enable Internet sharing, everything works perfectly and all my other devices can use the Internet.
    Now sure how to further troubleshoot and resolve this issue. Any advice would be greatly appreciated. I should add that the iMac is running Mac OS X Server which was also upgraded to 10.8. I was looking inside the Server for security options that restricted internet access via Internet sharing. Nothing.
    Thank you!
    David

    Thanks for your answer.
    Unfortunately this isn't a solution for my problem. As I understood, you showed me that your IP addresses had changed after enabling/disabling internet sharing. I checked my IP addresses after enabling/disabling internet sharing by using "ifconfig" but they are the same as set manually before.
    My other strange observation regarding the ping command has gone now. After switching on internet sharing I had to disconnect the ethernet cable and plug it in again. Then the ping between both computers is working (but still not internet sharing).
    Anyway ... thanks for your help!

  • Sound Receiver Stopped working after iOS7 on iPhone5

    I have been using iPhone 5. After installtion of iOS 7 my receiver stopped working. I can use bluetooth, speaker and headphone. But i cannot use phone receiver. I started working for a day after iOS7.0.2 for a day after that it stopped working one more time. I took it to Apple store; they replaced my receiver but still does not work. According to them it's out of warranty as i purchased the phone on first day when i went on sale and it's more than year. Anyone has any clue. The replacement cost is $269.
    Any idea???

    My daughter has the same problem. The speakers work but not the sound receiver. Going to call apple tomorrow.

  • Internet sharing stopped working after restart

    Hi,
    I'm connected to internet via thunderbolt->rj-45 reduction. I need to share intenet connection to my iphone and ipad via wifi. It worked fine until I restarted mac. Now I can see mac is connected to internet and sharing is on. On my iphone/ipad I can see the wifi name - i'm even connected to this wifi - but when I want to browse some webpage, safari is loading forever (to timeout)..
    The firewall doesn't matter, because it worked fine before restart and I didnt changed any settings.
    I tryied to turn off and on the Internet sharing, change security settings, restart wifi DHCP settings but nothing worked.
    I tryied to set static IP's on mac and iphone/ipad but it still the same issue - devices can connect but internet doesn't work (loading forever).
    I have OSX Moutain Lion 10.8.4 - Macbook Pro with retina
    Any ideas?
    Thanks

    Asking for my own clarification. Are all three - computer and 2 devices - having trouble connecting?
    Computer
    Troubleshooting Wi-Fi issues in OS X
    WiFi Security
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • App password stopped working after IOS7 update

    iPhone:  3rd party app purchased via iTunes App Store.  "My Disk" worked great, until I did the IOS7 update, then the password stopped working.
    Creator, "Weihe Mo" will not answer emails or FaceBook IM's.  I'm at my wit's end.  Is there any way to break through a password for an App?

    So the password for the app is no longer letting you into the App? You were right to contact the app developer for support, because it is a non-Apple applicaiton. Apple has nothing to do with the app or being able to make it work. Keep hounding the developer for support, that is your only avenue of approach for this.

  • Internet explorer stopped working after installing iTunes 11.1.5

    Installed new version of iTunes 11.1.5 on pc running windows 8.1 and now internet explorer has stopped working.

    I have exactly the same problem with a new acer aspire. I successfully installed Itunes but windods 8.1 explorer stopped working. I had to deinstall itunes for IE to work.
    Thinking I have a corrupt install file I tried a second time but with exactly the same result. I shure would like to hear an answer.
    THank you

  • Server File shares stop working after system reboot (10.10 / 4.0.3)

    Hello Community,
    I have a mac mini running OS X Server 4.0.3. I use it as a file server on my local network and remotely for when I'm at the office, it backups my and my wife's systems and I use the VPN for when I’m in places in the world where certain networks are blocked. It all worked like a charm back on 10.9 but now on 10.10 things get a little frustrating.
    I did a clean install of Yosemite 10.10 and Server 4.0.3. Setup access over internet (server.mydomain.com, local ip bound to its dns). DNS in Server running. Setup Open Directory with a few network users. Created shares for different folders on a thunderbolt disk and all was good using files from both my local network as from my office. Did a reboot of the Server and now when I try to connect (using ‘connect to Server’) the list of shares pops up but when I select a folder it gives me ‘There was a problem connecting to the server “server.mydomain.com”. Check if the server name or IP address, and then try to again. If you continue…’. I have no clue what to do since nothing has changed from a name or IP perspective. Side note: in Yosemite I could only connect to the server using ‘connect to server’ never from the sidebar which worked in my previous Mavericks setup. I removed / deinstalled Server 4.0.3 and did a clean setup of server, got everything working, reboot > broken.
    I hope you can shed some light on this situation and help me get it up and running again.
    Best regards,
    Daan
    Edit: VPN, TimeMachine and VNC are all working like they should.

    In the AFP access log it shows a login with immediate logout and error -5023 0 0. (No AFPLogin call has successfully been made for this session)..

  • Siri is lagging or i stopped working after update. (iphone 5)

    after i updated i use siri i ask something it just goes black and comes back or just starts lagging, what shud i do?

    Try doing a hard reset on your iPhone. Hold doen the power and home key at the same time until the phone reboots and you see the apple logo.

  • Siri stopped working on my iPhone 5 after upgrading to iOS7

    Siri stopped working on my iPhone 5 after upgrading to iOS7...Does anybody know how to fix this problem?

    To use Siri:
    1.  It must be on (Settings > General > Siri)
    2.  You must be connected to the internet
    3.  You must be in an area where Siri is permitted (it is not permitted, for example, in certain countries).

  • The audio in "speak screen" stops working after a few uses. IOS 8.2 did not fix this problem unfortunately. I'm using the Alex voice on a Sprint iPhone 6 plus- if that matters.

    I really enjoy the speak screen feature, as the voiceover is too inconvenient and tricky to use. The speak screen option works oerfectly for reading, and helps me as I'm dyslexic. However, the Alex voice stops working after the initial use or soon after. I then have to restart the phone every time in order to get the speak screen to acruelly speak again. Really annoying and was hoping that IOS 8.2 Would fix this, but it appears it had not fixed this bug. Any help with this?

    Any problem when connected to another wi-fi network besides your own?
    The only additonal troubleshooting options after powering the iPhone off and on, an iPhone reset, and resetting network settings on the iPhone is restoring the iPhone with iTunes from the iPhone's backup and/or restoring with iTunes as a new iPhone or not from the backup.
    If no change after restoring as a new iPhone or not from the backup - the same when connected to any wi-fi network besides your own as well as not being able to maintain internet access when connected to your carrier's cellular network, the iPhone has a hardware problem.

  • Iphone 4S sound issue - sound stops working after a few minutes

    The sound on my iphone 4S stops working after a couple of minutes, including both the headphones and the loudspeaker. If I unplug the headphones and replug them in, the sound starts to work again, but only for a few minutes until it conks out again. How can I fix this problem?

    Any problem when connected to another wi-fi network besides your own?
    The only additonal troubleshooting options after powering the iPhone off and on, an iPhone reset, and resetting network settings on the iPhone is restoring the iPhone with iTunes from the iPhone's backup and/or restoring with iTunes as a new iPhone or not from the backup.
    If no change after restoring as a new iPhone or not from the backup - the same when connected to any wi-fi network besides your own as well as not being able to maintain internet access when connected to your carrier's cellular network, the iPhone has a hardware problem.

  • My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

    My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

    i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

  • Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

    Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

    ejwoodall wrote:
    It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
    Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
    I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
    The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
    If your machine performs flawlessly, it may be a router issue.
    If your machine has connectivity issues there, it may be a hardware problem with your machine.
    There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
    But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
    In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

  • My iphone's internet just stopped working and i can no longer use the personal hot spot though I still have internet ?

    I'm on 3 as pay as you go and bought an all in one 15 so i get unlimited data for 1 month, but for somereason my internet has stopped working asnd i still have 3 weeks left of data? My iphone no longer show the personal hot spot button too and when i select it from mobile data it is forever loading and does not work >

    Contact the carrier and ask them what is going on.

Maybe you are looking for

  • Troubles updating ipod, cannot disconnect, songs erased (tried the 5 Rs)

    hey guys, i'm sorry to ask for help with my first post but i've been having some issues with my 2nd gen iPod nano lately. when i connect my iPod to my computer, i get a message in iTunes saying "Songs on the iPod "Han's iPod" cannot be updated becaus

  • How to reflect a new field in Bank data while making payment through F-53?

    Hello Experts, How can i reflect a new field (payment reference) in bank data while making payment through F-53? I have tried to do it by Field status group(OBC4) but the same is replicating in vendor invoice but not in vendor payment. I tried it at

  • Error with BPM

    I am working on a Scenario in which XI is receving a soap message using soap adapter and passing it to BPM Engine but i get following error in message monitoring. I have a abstract inteface by name MI_FileIn which is used in the BPM. in the Receive s

  • View weblogic server logs and application logs

    Hi All, Is there any way to view log files of Weblogic Admin Server, managed server and application logs through OEM console. ( In text editor-- full file / tail -f output).. Thanks | Kranthi

  • RSS feed and DOMParser. Confused and urgent.

    Hi, I'm VERY new to RSS and have decided to give this application a try. I'm trying to create a java application that reads http://weather.nearperfect.com/weather/world.rss/081/c00234 and prints out informations such as "Title, link, description", an