Server File shares stop working after system reboot (10.10 / 4.0.3)

Hello Community,
I have a mac mini running OS X Server 4.0.3. I use it as a file server on my local network and remotely for when I'm at the office, it backups my and my wife's systems and I use the VPN for when I’m in places in the world where certain networks are blocked. It all worked like a charm back on 10.9 but now on 10.10 things get a little frustrating.
I did a clean install of Yosemite 10.10 and Server 4.0.3. Setup access over internet (server.mydomain.com, local ip bound to its dns). DNS in Server running. Setup Open Directory with a few network users. Created shares for different folders on a thunderbolt disk and all was good using files from both my local network as from my office. Did a reboot of the Server and now when I try to connect (using ‘connect to Server’) the list of shares pops up but when I select a folder it gives me ‘There was a problem connecting to the server “server.mydomain.com”. Check if the server name or IP address, and then try to again. If you continue…’. I have no clue what to do since nothing has changed from a name or IP perspective. Side note: in Yosemite I could only connect to the server using ‘connect to server’ never from the sidebar which worked in my previous Mavericks setup. I removed / deinstalled Server 4.0.3 and did a clean setup of server, got everything working, reboot > broken.
I hope you can shed some light on this situation and help me get it up and running again.
Best regards,
Daan
Edit: VPN, TimeMachine and VNC are all working like they should.

In the AFP access log it shows a login with immediate logout and error -5023 0 0. (No AFPLogin call has successfully been made for this session)..

Similar Messages

  • My flash player stops working after a reboot.

    My flash player stops working after a reboot. i have flash 12.0.044 installed on a dell laptop with windows 7. The flash works fine until the next day when I restart my computer. If I go to control panel / programs and features I notice that the program is still there but the icon has turned blank. If I re-install it works fine until the next reboot. I have asked the IT services company we work with and they have completely ‘rebuild’ my computer. (Installed new windows etc etc) and still the problem won’t go away.  I am at a loss. Who can help? Thank you so much in advance. Duncan

    I'd suggest trying a clean install: How do I do a clean install of Flash Player?
    For offline installers, please see this help document: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

  • File history stopped working after a warning message in the event log

    I have encountered this twice that File history stopped working, the event log says:
    Unusual condition was encountered during finalization of a backup cycle for configuration C:\Users\xxxx\AppData\Local\Microsoft\Windows\FileHistory\Configuration\Config
    If I re-run it, it consumes the backup disk space but still failed to backup.
    I have to manually delete all backup, turn off File History and re-configure it again to make it work.
    This happened twice already, so all my file history lost after re-config.
    Anyone encounter the same situation?

    MICROSOFT is plagued by idiots!!!!
    - Just turn it off
    - then click  "select drive"
    - and when it asks you the retarded question... just click >>>>>"NO"<<<<<<<    -_-
    Seriously... this is the answer.... frigging retards at microsoft... to think it takes an army of programmers and billions of dollars to create such idiocy!
    http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/cannot-change-drive-in-file-history-windows-8/6dbeca54-d05e-4f93-9262-45a56d6a82d1?page=2&msgId=f1792c5e-c5d0-4163-b449-c7165d72f88d&tab=question&status=AllReplies&status=AllReplies%2CAllReplies
    I cant believe these morons put everyone through such hell and then don't even bother to follow up with the correct solution.
    To top it of the moron moderator marks this as an answer??!!!
    What a pathetic joke - I hope everyone reads this message before being punished by the miles of bullcrap in this thread -_-
    Microsoft = ridiculous
    Thanks! I guess the TL;DR version is "to change your file history drive you need to discard the current temp files."
    Exactly :)
    It's the bad wording in the messages.
    the first message (which I can only vaguely remember so can't quote exactly) that gives you the impression you can continue
    something but doesn't make clear that to so will need the "old drive" configured the way the "old drive" was.
    Then the next message is just confusing:
    “we can't copy files to this location.  Your current File History drive is disconnected.  Reconnect the drive and try again” 
    sounds like 
    “we can't copy files to this location. [because there's a problem with the new location]
    Your current File History drive is disconnected. [the new location is disconnected]
    Reconnect the drive and try again [reconnect your new location and try again]” 
    When it should be reworded to say something along the lines of (in more formal language):
    "You asked us to continue...give us the drive you were previously using...or if it's no longer available, click here to start from scratch"
    (I know that's all the opposite of tldr but I'm trying again to put into words what I think was happening).

  • Internet share stopped working after IOS7(iPhone)

    Hey. Before i updated my iPhone4 to IOS7.0.2 it could easily use internet share to both my laptops. but now, i can only use to one of them.
    Well.. if i'm lucky. i can for 3 minutes on the other. then it jumps off again. for like.. hours.. then it can be on 3 minutes again.
    When i use "failuresearch" on my laptop it comes up with different things.
    That i should try turn it off, that i should check if it's the right password, that i just can't connect and some other reasons.
    I've tryed for weeks to make it work somehow now.. i and don't know what to do.
    Hope any of you can help me!
    Thank you!
    -Patrick
    Note: there is no problem connecting to wifi with the laptop i can't connect to my iphone with.
    Message was edited by: The Patrick

    Hey NickD227,
    Thanks for the question, and great troubleshooting. Based on the information you have provided, it sounds like there may be some debris in your headphone jack - as the phone seems to think that something is plugged in.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    1. Verify that the volume is set to a level you would normally be able to hear.
    2. Ensure that there is nothing plugged in to the headset jack or the dock connector.
    3. If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    4. Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    5. If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    6. If the iPhone is paired with a Bluetooth headset or car kit:
              - Try turning off Bluetooth.
              - If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    7. Restart the iPhone.
    8. If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    9. If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    If the issue persists, please follow the last step by contacting Apple Support for support and service options.
    Thanks,
    Matt M.

  • Iphone file browser stopped working after upgraded to IOS 5

    Hi,
    I have an iphone 3gs which I have recently upgraded to IOS 5. But to my horror after I have done that I can no longer browser my iphone's internal storage. Iphone connected to PC via USB, the file explorer no longer available. It can still sync with itune fine but there is noway I can access the storage locater in the phone via file explorer like I used to. Mind you I still have 3GB of space there.
    Is that a bug? Or I stuffed up the upgrade some where?
    Anyone else had this experience?
    Alex

    I know whats wrong now...
    My phone had been emptied after I last restored it, after I took a picture and insert the phone back to the PC. The file browser shows up again...
    That means if there is nothing in the phone, the file browser wouldn't be too bother to even show up. Weird one...

  • XI file adapter stopped working after PI 7.0 upgrade (SP14)

    We have just completed a PI 7.0 upgrade and the file adapter has stopped picking up files from the inbound directory. The j2ee/cluster/server0/log/applications.log file shows
    #1.5^H#0013217C0311008600001F91000011D100047C99629BA213#1262898132157#/Applicati
    ons/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File##com.sap
    .aii.adapter.file.File2XI.processFileList()#J2EE_GUEST#0##n/a##35790820fbcf11dec
    b310013217c0311#XI File2XI[from_ICCnet_TEST_CHANNEL/ICC_Inbound/ICCnet]_106031##
    0#0#Error#1#com.sap.aii.adapter.file.File2XI#Plain###Channel from_ICCnet_TEST_CH
    ANNEL: Sending file failed with com.sap.engine.services.ejb.exceptions.BaseTrans
    actionRolledbackLocalException: Exception thrown in method process. The transact
    ion is marked for rollback. - continue processing#
    followed by the following:
    #1.5^H#0013217C03110061000020F9000011D100047C9962B8AA7E#1262898134060#/Applicati
    ons/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/File##com.sap
    .aii.adapter.file.util.AuditLog.addAuditLog(PublicMessageKey, String, AuditLogSt
    atus, String, String, Object[])#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : [
    0681afffffffa01ffffffbd30]#n/a##37c987d2fbcf11de89c70013217c0311#XI File2XI[from
    ICCnetTEST_CHANNEL/ICC_Inbound/ICCnet]_106033##0#0#Error#1#com.sap.aii.adapter
    .file.util.AuditLog#Plain###FILE_ERR_211#
    I think I have read every note but can not seem to find a solution -- any help would be appreciated.
    Thansk,
    Tom

    Here is the defaulttracefile.
    #1.5^H#0013217C0311007200006379000011D100047CA71C3769BC#1262957080118#com.sap.ai
    i.adapter.file.File2XI##com.sap.aii.adapter.file.File2XI.processFileList()#J2EE_
    GUEST#0##n/a##df3c5bd2fc5811de92ae0013217c0311#XI File2XI[from_ICCnet_TEST_CHANN
    EL/ICC_Inbound/ICCnet]_192064##0#0#Error#1#/Applications/ExchangeInfrastructure/
    AdapterFramework/Services/ADAPTER/ADMIN/File#Plain###Channel from_ICCnet_TEST_CH
    ANNEL: Sending file failed with com.sap.engine.services.ejb.exceptions.BaseTrans
    actionRolledbackLocalException: Exception thrown in method process. The transact
    ion is marked for rollback. - continue processing#
    #1.5^H#0013217C0311007400005FCA000011D100047CA71C58E8CF#1262957082311#com.sap.en
    gine.services.ejb#seeburger.com/com.seeburger.bicxiadapter.module.classifier#com
    .sap.engine.services.ejb#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : [0681aff
    fffffa02ffffffe9ffffffa6]#n/a##d2200912fc5811deca270013217c0311#XI File2XI[from_
    ICCnet_TEST_CHANN

  • Bonjour printer on Windows XP's stops working after reboot

    Hello!
    We have a AirPort extreme with an HP LaserJet 1010 connected to it. AirPort Extreme also serves as a gateway and DHCP server for the LAN.
    Installing the printer on the local machines running Windows XP thru Bonjour works fine and all the documents are printed correctly. The printer is being installed as a single default printer on the system.
    However, printer stops working after Windows XP machines are rebooted (the next morning). The installed printer keeps accumulating documents in queue and not spooling them to the printer. Issue could only be resolved by adding a new printer (which also works fine).
    It seems not to be a connectivity problem as XP machines access the Internet thru the AirPort Extreme without any problem. Bonjour printer setup wizard also instantly sees the printer and is able to install it correctly. Mac's in the same network (iBook G3 and PowerBook G4 with Tiger) are not affected by the issue.
    Any ideas on how the situation could be corrected?
    - Baglan

    Did anyone find a solution to this.
    I have a HP Laserjet 1020 attached to my Airport. Using the Bonjour program on my Windows XP computer it found the printer attached, and added it to my printers. When I print all seems ok - it appears in the printer queue, then disappears as though its printed - but nothing comes out of the printer.
    Any ideas? Thanks.
    Message was edited by: jonny999

  • Adobe Edge Animate CC 2014.1  is totally not working. It stop working after 5min. Sometimes is stops the operating system.

    Adobe Edge Animate CC 2014.1  is totally not working. It stop working after 5min. Sometimes is stops the operating system. On on mac OS X Yosemite. macbook pro i7 2013.
    I reinstalled it not helping.
    Message was edited by: Daniel Boguszewski

    UPDATE
    i have ulpaded 2 animation ( one normal and one Responsive ) in 2 different server here the link
    www.eclipseadv.com/maliRP/maliRP.html
    Untitled
    via SAFARI or CHROME on MAC all OK
    but via IPAD ( SAFARI, CHROME and MERCURY) i didn't see the video, just the animation of the BUTTON  and the link if i click on it (not in Mercury), like in the content viewer.

  • Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

    Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

    Hmmm, here's the opposite problem/fix...
    Gmail send but not receive...
    Here are two steps that have come in handy in related situations
    1) login to gmail on your computer or device via a web browser
    2) once logged in successfully, go to this URL to unlock:
    https://www.google.com/accounts/DisplayUnlockCaptch
    Is your gMail POP or IMAP?
    If IMAP...
    Is the Outgoing server smtp.gmail.com, port 25, SSL on, & Authentication = Password

  • I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

    I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.

    My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.

    It is in recovery mode. The picture is telling you to connect to iTunes via micro usb cable in order to restore.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone

    On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone.

        Hi JoeC695,
    That's not good! We want your software to work properly. Have you tried uninstalling the Verizon Software Utility from your MAC? Do you receive a specific error message?
    Thanks,
    PamelaF_VZW
    Tweet us vzwsupport

  • Add-ons for android Firefox stop working after reboot

    I have Firefox (ver. 21.0) installed on my Ramos W30 tablet running ICS (4.0.4) and my UG007 android stick running JB (4.1.1). They both have the same problem. After a reboot, the add-ons stop working. If you look at the add-ons, all the info which would show below "options" is gone. The only way I've been able to get them working again is to uninstall and reinstall the add-ons.
    Any other way to fix this or prevent this from happening?

    I only use 2 add-ons and it happens with both. I use adblock and tabstothefront. They both stop working after reboot.

  • Managed sql server installer has stopped working sql 2008 r2

    I tried to installed sql 2008 r2 on my windows 7 but unfortunately I got message "managed sql server installer has stopped working"
    1. I tried to program feature on and off feature 
    2. I checked setup file is corrupted or not setup file is well in condition
    3. I turn on firewall too.
    then again I tried to installed again same problem I faced.
    please any different way to overcome from this problem!
    regard Bishnu Khaling!

    Hi Bishnu,
    As Shanky’s post, you can post the SQL Server setup log files for analysis.
    According to the error message, it is usually a problem with the installation of .NET Framework on the machine. However, from your description, you try to turn on the Microsoft .NET Framework 3.5 feature and still fail to install SQL Server 2008 R2.
    Do you reboot your computer after enabling .NET Framework 3.5?
    To further troubleshoot this issue, I recommend you perform the following steps.
    1. Run the below tool to verify the state of one or more versions of the .NET Framework on the computer .
    http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx
    2. If .Net Frameworks 3.5 cannot be verified in step1, please use the
    .NET Framework Repair Tool to repair it.
    3. If there’s no problem with .Net Frameworks 3.5, and you also have .NET Framework 4.0 or 4.5 installed on the computer, please uninstall .NET Framework 4.0 or 4.5 completely. Then reinstall SQL Server and check if it is successful.
    4. In addition, please make sure that the Windows 7 system is not damaged.
    For more details about the error, you can also review the following blog.
    Fix: Managed SQL Server installer has stopped working on Windows 7 | 8:
    http://www.thewindowsclub.com/managed-sql-server-installer-has-stopped-working
    Thanks,
    Lydia Zhang

  • Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"

    Hello,
    I have a big problem.
    I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
    I already tried all solutions from Google for this problem but nothing works.
    Can someone help me plase?
    My System: Window 8 Pro with Visual Studio 2012.
    Thanks
    Sven

    Would you please uplaod/share SQL Server setup logs
    C:\Program
    Files\Microsoft
    SQL Server\110\Setup
    Bootstrap\Log\20130125_133342
    to file sharing service like SkyDrive.com
    FAQ
    Regards,
    Ahmed Ibrahim
    SQL Server Setup Team
    My Blog
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and "Vote as Helpful"
    on posts that help you.
    This can be beneficial to other community members reading the thread.

Maybe you are looking for