Interview Status
I had telephonic interview aprox 45 minute with india banglore technical team on 31th july for Linux administrator.
How can I know, the status of interview.please let me know.
and when will be the list announce....
any one had interview for the same position? ?? please tell me.
Edited by: user8711412 on Aug 10, 2009 3:55 AM
user8711412 wrote:
I had telephonic interview aprox 45 minute with india banglore technical team on 31th july for Linux administrator.
How can I know, the status of interview.please let me know.31st July in anyways was not too long in the past. Why you are in such a hurry? You do know I hope that they must have not interviewed only you and there would be many like you and its not at all a wise thing to call back all of the candidates and tell them what they have scored, at least not so early. Wait for some time( and this surely is not going to be few days) and if you would qualify for the next round, someone would call you. No one over here and/or else anywhere would be able to tell you about the status.
and when will be the list announce.... List? You mean like we have in colleges? Well I don't think that there would be any "list". They would hire who would be right for them.
HTH
Aman....
Similar Messages
-
Hi All,
I need the below details to be added in recruitment module. Can any one tell me how we can input the information?
Total Exp.
SAP relevant Exp
Present CTC
Expected CTC
Notice Period
Interview status ( Tel, Personal, HR interviews, Medical Test with date required) Can this be done by using T-Code PB60?
Offer letter ( Date of Dispatch, Date of letter received by applicant)
Remark (Offer accepted, offer rejected)
Kindly revert back asap.
Regards,
Sailaja
Message was edited by:
Zsolt MarkusDear All,
Kindly revert to my Question. This is urgent.
I require the below fields in Rec moudle.
1. Total Exp.
2. SAP Relevant Exp.
3. Present CTC
4. Expected CTC
5. Present Organization, Notice Period
6. TEL, Personal, HR & Mecdical interview status <i>(sure i can maintain the
same in PB60 but how without the standard text, as no intranet connection
required)</i>
7. Date of dispatch, date applicant received the letter. <i>(can i treat as activities?)</i>
Plz revert back if any clarification required.
Regards,
Sailaja -
Hi Friends,
I was face some Interview.
Please send answers to the questions?
How many data Fields and key fields we can create in DSO?
You can overwrite key fields or Data Fields?
Which up date we use in Delta queue extraction( v1 or v2 or v3)
Which message we get when transported request is failed?
what is the Structural difference between Infoucbe and DSO
Data Loading is taking huge time when we extract data from source system to BI system/ how to solve?(Before it took 3-4 Hours now data loading takes 4 days)What is the difference between Display Attribute and
Navigational Attribute? How to make display attribute and navigational
attribute?
How to load flat file data?
How to load Hierarchy file data?
What is HACR?
How to maintain HACR?
If any issue in HACR then how to resolve the issue?
What is Baby Cube?
Why we are creating Aggregates?
What is the use of Aggregates?
Is there
any particular field on that we can create Aggregates or we can maintain
Aggregate on any field?
What is
the different DSO available? And what is the difference between those DSO?
What is
replacement path?
What are
the extractor types?
• Application Specific
o BW Content FI, HR, CO, SAP CRM, LO Cockpit
o Customer-Generated Extractors
LIS, FI-SL, CO-PA
• Cross Application (Generic Extractors)
o DB View, InfoSet, Function Module
2. What are the steps involved in LO Extraction?
• The steps are:
o RSA5 Select the DataSources
o LBWE Maintain DataSources and Activate Extract Structures
o LBWG Delete Setup Tables
o 0LI*BW Setup tables
o RSA3 Check extraction and the data in Setup tables
o LBWQ Check the extraction queue
o LBWF Log for LO Extract Structures
o RSA7 BW Delta
Queue Monitor
3. How to create a connection with LIS InfoStructures?
• LBW0 Connecting LIS InfoStructures to BW
4. What is the difference between ODS and InfoCube and MultiProvider?
• ODS: Provides granular data, allows overwrite and data is in transparent
tables, ideal for drilldown and RRI.
• CUBE: Follows the star schema, we can only append data, ideal for primary
reporting.
• MultiProvider: Does not have physical data. It allows to access data from
different InfoProviders (Cube, ODS, InfoObject). It is also preferred for
reporting.
5. What are Start routines, Transfer routines and Update routines?
• Start Routines: The start routine is run for each DataPackage after the data
has been written to the PSA and before the transfer rules have been executed.
It allows complex computations for a key figure or a characteristic. It has no
return value. Its purpose is to execute preliminary calculations and to store
them in global DataStructures. This structure or table can be accessed in the
other routines. The entire DataPackage in the transfer structure format is used
as a parameter for the routine.
• Transfer / Update Routines: They are defined at the InfoObject level. It is
like the Start Routine. It is independent of the DataSource. We can use this to
define Global Data and Global Checks.
6. What is the difference between start routine and update routine, when, how
and why are they called?
• Start routine can be used to access InfoPackage while update routines are
used while updating the Data Targets.
7. What is the table that is used in start routines?
• Always the table structure will be the structure of an ODS or InfoCube. For
example if it is an ODS then active table structure will be the table.
8. Explain how you used Start routines in your project?
• Start routines are used for mass processing of records. In start routine all
the records of DataPackage is available for processing. So we can process all
these records together in start routine. In one of scenario, we wanted to apply
size % to the forecast data. For example if material M1 is forecasted to say
100 in May. Then after applying size %(Small 20%, Medium 40%, Large 20%, Extra
Large 20%), we wanted to have 4 records against one single record that is
coming in the info package. This is achieved in start routine.
9. What are Return Tables?
• When we want to return multiple records, instead of single value, we use the
return table in the Update Routine. Example: If we have total telephone expense
for a Cost Center, using a return table we can get
expense per employee.
10. How do start routine and return table synchronize with each other?
• Return table is used to return the Value following the execution of start
routine
11. What is the difference
between V1, V2 and V3 updates?
• V1 Update: It is a Synchronous update. Here the Statistics update is carried
out at the same time as the document update (in the application
tables).
• V2 Update: It is an Asynchronous update. Statistics update and the Document
update take place as different tasks.
o V1 & V2 don't need scheduling.
• Serialized V3 Update: The V3 collective update must be scheduled as a job
(via LBWE). Here, document data is collected in the order it was created and
transferred into the BW as a batch job. The transfer sequence may not be the
same as the order in which the data was created in all scenarios. V3 update
only processes the update data that is successfully processed with the V2
update.
12. What is compression?
• It is a process used to delete the Request IDs and this saves space.
13. What is Rollup?
• This is used to load new DataPackages (requests) into the InfoCube
aggregates. If we have not performed a rollup then the new InfoCube data will
not be available while reporting on the aggregate.
14. What is table partitioning and what are the benefits of partitioning in an
InfoCube?
• It is the method of dividing a table which would enable a quick reference.
SAP uses fact file partitioning to improve performance. We can partition only
at 0CALMONTH or 0FISCPER. Table partitioning helps to run the report faster as
data is stored in the relevant partitions. Also table maintenance becomes
easier. Oracle,
Informix, IBM DB2/390 supports table partitioning while SAP DB, Microsoft SQL
Server, IBM DB2/400 do not support table portioning.
15. How many extra partitions are created and why?
• Two partitions are created for date before the begin date and after the end
date.
16. What are the options available in transfer rule?
• InfoObject
• Constant
• Routine
• Formula
17. How would you optimize the dimensions?
• We should define as many dimensions as possible and we have to take care that
no single dimension crosses more than 20% of the fact table size.
18. What are Conversion Routines for units and currencies in the update rule?
• Using this option we can write ABAP
code for Units / Currencies conversion. If we enable this flag then unit of Key
Figure appears in the ABAP code as an additional parameter. For example, we can
convert units in Pounds to Kilos.
19. Can an InfoObject be an InfoProvider, how and why?
• Yes, when we want to report on Characteristics or Master Data. We have to
right click on the InfoArea and select "Insert characteristic as data
target". For example, we can make 0CUSTOMER as an InfoProvider and report
on it.
20. What is Open Hub Service?
• The Open Hub Service enables us to distribute data from an SAP BW system into
external Data Marts, analytical applications, and other applications. We can
ensure controlled distribution using several systems. The central object for
exporting data is the InfoSpoke. We can define the source and the target object
for the data. BW becomes a hub of an enterprise data warehouse.
The distribution of data becomes clear through central monitoring from the
distribution status in the BW system.
21. How do you transform Open
Hub Data?
• Using BADI we can transform Open Hub Data according to the destination
requirement.
22. What is ODS?
• Operational DataSource is used for detailed storage of data. We can overwrite
data in the ODS. The data is stored in transparent tables.
23. What are BW Statistics and what is its use?
• They are group of Business Content InfoCubes which are used to measure
performance for Query and Load Monitoring. It also shows the usage of
aggregates, OLAP and Warehouse management
http://www.ittestpapers.com/articles/713/3/SAP-BW-Interview-Questions---Part-A/Page3.html
Communication Structure and Transfer
rules
• Create and InfoPackage
• Load Data
25. What are the delta options available when you load from flat file?
• The 3 options for Delta Management with Flat Files:
o Full Upload
o New Status for Changed records (ODS Object only)
o Additive Delta (ODS Object & InfoCube)
Q) Under which menu path is the Test Workbench to be found, including in
earlier Releases?
The menu path is: Tools - ABAP Workbench - Test - Test Workbench.
Q) I want to delete a BEx query that is in Production system through request. Is
anyone aware about it?
A) Have you tried the RSZDELETE transaction?
Q) Errors while monitoring process chains.
A) During data loading. Apart from them, in process chains you add so many
process types, for example after loading data into Info Cube, you rollup data
into aggregates, now this rolling up of data into aggregates is a process type
which you keep after the process type for loading data into Cube. This rolling
up into aggregates might fail.
Another one is after you load data into ODS, you activate ODS data (another
process type) this might also fail.
Q) In Monitor----- Details (Header/Status/Details) à Under Processing (data
packet): Everything OK à Context menu of Data Package 1 (1 Records): Everything
OK ---- Simulate update. (Here we can debug update rules or transfer rules.)
SM50 à Program/Mode à Program à Debugging & debug this work process.
Q) PSA Cleansing.
A) You know how to edit PSA. I don't think you can delete single records. You
have to delete entire PSA data for a request.
Q) Can we make a datasource to support delta.
A) If this is a custom (user-defined) datasource you can make the datasource
delta enabled. While creating datasource from RSO2, after entering datasource
name and pressing create, in the next screen there is one button at the top,
which says generic delta. If you want more details about this there is a
chapter in Extraction book, it's in last pages u find out.
Generic delta services: -
Supports delta extraction for generic extractors according to:
Time stamp
Calendar day
Numeric pointer, such as document number & counter
Only one of these attributes can be set as a delta attribute.
Delta extraction is supported for all generic extractors, such as tables/views,
SAP Query and function modules
The delta queue (RSA7) allows you to monitor the current status of the delta
attribute
Q) Workbooks, as a general rule, should be transported with the
role.
Here are a couple of scenarios:
1. If both the workbook and its role have been previously transported, then the
role does not need to be part of the transport.
2. If the role exists in both dev and the target system but the workbook has
never been transported, and then you have a choice of transporting the role
(recommended) or just the workbook. If only the workbook is transported, then
an additional step will have to be taken after import: Locate the WorkbookID
via Table RSRWBINDEXT (in Dev and verify the same exists in the target system)
and proceed to manually add it to the role in the target system via Transaction
Code PFCG -- ALWAYS use control c/control v copy/paste for manually adding!
3. If the role does not exist in the target system you should transport both
the role and workbook. Keep in mind that a workbook is an object unto itself
and has no dependencies on other objects. Thus, you do not receive an error
message from the transport of 'just a workbook' -- even though it may not be
visible, it will exist (verified via Table RSRWBINDEXT).
Overall, as a general rule, you should transport roles with workbooks.
Q) How much time does it take to extract 1 million (10 lackhs) of records into
an infocube?
A. This depends, if you have complex coding in update rules it will take longer
time, or else it will take less than 30 minutes.
Q) What are the five ASAP Methodologies?
A: Project plan, Business Blue print, Realization, Final preparation & Go-Live - support.
1. Project Preparation: In this phase, decision makers define clear project
objectives and an efficient decision making process ( i.e. Discussions with the
client, like what are his needs and requirements etc.). Project managers
will be involved in this phase (I guess).
A Project Charter is issued and an implementation strategy is outlined in this
phase.
2. Business Blueprint: It is a detailed documentation of your company's
requirements. (i.e. what are the objects we need to develop are modified
depending on the client's requirements).
3. Realization: In this only, the implementation of the project takes place (development
of objects etc) and we are involved in the project from here only.
4. Final Preparation: Final preparation before going live i.e. testing,
conducting pre-go-live, end user training etc.
End user training is given that is in the client site you train them how to
work with the new environment, as they are new to the technology.
5. Go-Live & support: The project has gone live and it is into production.
The Project team will be supporting the end users.
Q) What is landscape of R/3 & what is landscape of BW. Landscape of R/3 not
sure.
Then Landscape of b/w: u have the development system, testing system, production system
Development system: All the implementation part is done in this sys. (I.e.,
Analysis of objects developing, modification etc) and from here the objects are
transported to the testing system, but before transporting an initial test
known as Unit testing
(testing of objects) is done in the development sys.
Testing/Quality system: quality check is done in this system and integration
testing is done.
Production system: All the extraction part takes place in this sys.
Q) How do you measure the size of infocube?
A: In no of records.
Q). Difference between infocube and ODS?
A: Infocube is structured as star schema (extended) where a fact table is
surrounded by different dim table that are linked with DIM'ids. And the data
wise, you will have aggregated data in the cubes. No overwrite functionality
ODS is a flat structure (flat table) with no star schema concept and which will
have granular data (detailed level). Overwrite functionality.
Flat file
datasources does not support 0recordmode in extraction.
x before, -after, n new, a add, d delete, r reverse
Q) Difference between display attributes and navigational attributes?
A: Display attribute is one, which is used only for display purpose in the
report. Where as navigational attribute is used for drilling down in the
report. We don't need to maintain Navigational attribute in the cube as a
characteristic (that is the advantage) to drill down.
Q. SOME DATA IS UPLOADED TWICE INTO INFOCUBE. HOW TO CORRECT IT?
A: But how is it possible? If you load it manually twice, then you can delete
it by requestID.
Q. CAN U ADD A NEW FIELD AT THE ODS LEVEL?
Sure you can. ODS is nothing but a table.
Q. CAN NUMBER OF DATASOURCES HAVE ONE INFOSOURCE?
A) Yes of course. For example, for loading text and hierarchies we use
different data sources but the same InfoSource.
Q. BRIEF THE DATAFLOW IN BW.
A) Data flows from transactional system to analytical system (BW). DataSources
on the transactional system needs to be replicated on BW side and attached to
infosource and update rules respectively.
Q. CURRENCY CONVERSIONS CAN BE WRITTEN IN UPDATE RULES. WHY NOT IN TRANSFER
RULES?
Q) WHAT IS PROCEDURE TO UPDATE DATA INTO DATA TARGETS?
FULL and DELTA.
Q) AS WE USE Sbwnn, sbiw1, sbiw2 for delta update in LIS THEN
WHAT IS THE PROCEDURE IN LO-COCKPIT?
No LIS in LO cockpit. We will have datasources and can be maintained (append
fields). Refer white paper
on LO-Cockpit extractions.
Q) Why we delete the setup tables (LBWG) & fill them (OLI*BW)?
A) Initially we don't delete the setup tables but when we do change in extract
structure we go for it. We r changing the extract structure right, that means
there are some newly added fields in that which r not before. So to get the
required data ( i.e.; the data which is required is taken and to avoid
redundancy) we delete n then fill the setup tables.
To refresh the statistical data.
The extraction set up reads the dataset that you want to process such as,
customers orders with the tables like VBAK, VBAP) & fills the relevant communication
structure with the data. The data is stored in cluster
tables from where it is read when the initialization is run. It is important
that during initialization phase, no one generates or modifies application
data, at least until the tables can be set up.
Q) SIGNIFICANCE of ODS?
It holds granular data (detailed level).
Q) WHERE THE PSA DATA IS STORED?
In PSA table.
Q) WHAT IS DATA SIZE?
The volume of data one data target holds (in no. of records)
Q) Different types of INFOCUBES.
Basic, Virtual (remote, sap remote and multi)
Virtual Cube is used for example, if you consider railways reservation all the
information has to be updated online. For designing the Virtual cube you have
to write the function module that is linking to table, Virtual cube it is like
a the structure, when ever the table is updated the virtual cube will fetch the
data from table and display report Online... FYI.. you will get the information
: https://www.sdn.sap.com/sdn
/index.sdn and search for Designing Virtual Cube and you will get
a good material designing the Function Module
Q) INFOSET QUERY.
Can be made of ODS's and Characteristic InfoObjects with masterdata.
Q) IF THERE ARE 2 DATASOURCES HOW MANY TRANSFER STRUCTURES ARE THERE.
In R/3 or in BW? 2 in R/3 and 2 in BW
Q) ROUTINES?
Exist in the InfoObject, transfer routines, update routines and start routine
Q) BRIEF SOME STRUCTURES USED IN BEX.
Rows and Columns, you can create structures.
Q) WHAT ARE THE DIFFERENT VARIABLES USED IN BEX?
Different Variable's are Texts, Formulas, Hierarchies, Hierarchy nodes &
Characteristic values.
Variable Types are
Manual entry /default value
Replacement path
SAP exit
Customer exit
Authorization
Q) HOW MANY LEVELS YOU CAN GO IN REPORTING?
You can drill down to any level by using Navigational attributes and jump
targets.
Q) WHAT ARE INDEXES?
Indexes are data base indexes, which help in retrieving data fastly.
Q) DIFFERENCE BETWEEN 2.1 AND 3.X VERSIONS.
Help! Refer documentation
Q) IS IT NESSESARY TO INITIALIZE EACH TIME THE DELTA UPDATE IS USED?
No.
Q) WHAT IS THE SIGNIFICANCE OF KPI'S?
KPI's indicate the performance of a company. These are key figures
Q) AFTER THE DATA EXTRACTION
WHAT IS THE IMAGE POSITION.
After image (correct me if I am wrong)
Q) REPORTING AND RESTRICTIONS.
Help! Refer documentation.
Q) TOOLS USED FOR PERFORMANCE TUNING.
ST22, Number ranges, delete indexes before load. Etc
Q) PROCESS CHAINS: IF U has USED IT THEN HOW WILL U SCHEDULING DATA DAILY.
There should be some tool to run the job daily (SM37 jobs)
Q) AUTHORIZATIONS.
Profile generator
Q) WEB REPORTING.
What are you expecting??
Q) CAN CHARECTERSTIC INFOOBJECT CAN BE INFOPROVIDER.
Of course
Q) PROCEDURES OF REPORTING ON MULTICUBES
Refer help. What are you expecting? MultiCube works on Union condition
Q) EXPLAIN TRANPSORTATION OF OBJECTS?
Dev---àQ and Dev-------àP
Q) What types of partitioning are there for BW?
There are two Partitioning Performance aspects for BW (Cube & PSA)
Query Data Retrieval
Performance Improvement:
Partitioning by (say) Date Range improves data retrieval by making best use of
database [data range] execution plans and indexes (of say Oracle database engine).
B) Transactional Load Partitioning Improvement:
Partitioning based on expected load volumes and data element sizes. Improves
data loading into PSA and Cubes by infopackages (Eg. without timeouts).
Q) How can I compare data in R/3 with data in a BW Cube after the daily delta
loads? Are there any standard procedures for checking them or matching the
number of records?
A) You can go to R/3 TCode RSA3 and run the extractor. It will give you the
number of records extracted. Then go to BW Monitor to check the number of
records in the PSA and check to see if it is the same & also in the monitor
header tab.
A) RSA3 is a simple extractor checker program that allows you to rule out
extracts problems in R/3. It is simple to use, but only really tells you if the
extractor works. Since records that get updated into Cubes/ODS structures are
controlled by Update Rules, you will not be able to determine what is in the
Cube compared to what is in the R/3 environment. You will need to compare
records on a 1:1 basis against records in R/3 transactions for the functional
area in question. I would recommend enlisting the help of the end user community
to assist since they presumably know the data.
To use RSA3, go to it and enter the extractor ex: 2LIS_02_HDR. Click execute
and you will see the record count, you can also go to display that data. You
are not modifying anything so what you do in RSA3 has no effect on data quality
afterwards. However, it will not tell you how many records should be expected
in BW for a given load. You have that information in the monitor RSMO during
and after data loads. From RSMO for a given load you can determine how many
records were passed through the transfer rules from R/3, how many targets were
updated, and how many records passed through the Update Rules. It also gives
you error messages from the PSA.
Q) Types of Transfer Rules?
A) Field to Field mapping, Constant, Variable & routine.
Q) Types of Update Rules?
A) (Check box), Return table
Q) Transfer Routine?
A) Routines, which we write in, transfer rules.
Q) Update Routine?
A) Routines, which we write in Update rules
Q) What is the difference between writing a routine in transfer rules and
writing a routine in update rules?
A) If you are using the same InfoSource to update data in more than one data
target its better u write in transfer rules because u can assign one InfoSource
to more than one data target & and what ever logic u write in update rules
it is specific to particular one data target.
Q) Routine with Return Table.
A) Update rules generally only have one return value. However, you can create a
routine in the tab strip key figure calculation, by choosing checkbox Return
table. The corresponding key figure routine then no longer has a return value,
but a return table. You can then generate as many key figure values, as you
like from one data record.
Q) Start routines?
A) Start routines u can write in both updates rules and transfer rules, suppose
you want to restrict (delete) some records based on conditions before getting
loaded into data targets, then you can specify this in update rules-start
routine.
Ex: - Delete Data_Package ani ante it will delete a record based on the
condition
Q) X & Y Tables?
X-table = A table to link material SIDs with SIDs for time-independent
navigation attributes.
Y-table = A table to link material SIDs with SIDS for time-dependent navigation
attributes.
There are four types of sid tables
X time independent navigational attributes sid tables
Y time dependent navigational attributes sid tables
H hierarchy sid tables
I hierarchy structure sid tables
Q) Filters & Restricted Key figures (real time example)
Restricted KF's u can have for an SD cube: billed quantity, billing value, no:
of billing documents as RKF's.
Q) Line-Item Dimension (give me an real time example)
Line-Item Dimension: Invoice no: or Doc no: is a real time example
Q) What does the number in the 'Total' column in Transaction RSA7 mean?
A) The 'Total' column displays the number of LUWs that were written in the
delta queue and that have not yet been confirmed. The number includes the LUWs
of the last delta request (for repetition of a delta request) and the LUWs for
the next delta request. A LUW only disappears from the RSA7 display when it has
been transferred to the BW System and a new delta request has been received
from the BW System.
Q) How to know in which table (SAP BW) contains Technical Name / Description
and creation data of a particular Reports. Reports that are created using BEx
Analyzer.
A) There is no such table in BW if you want to know such details while you are
opening a particular query press properties button you will come to know all
the details that you wanted.
You will find your information about technical names and description about
queries in the following tables. Directory of all reports (Table RSRREPDIR) and
Directory of the reporting component elements (Table RSZELTDIR) for workbooks
and the connections to queries check Where- used list for reports in workbooks
(Table RSRWORKBOOK) Titles of Excel Workbooks in InfoCatalog (Table
RSRWBINDEXT)
Q) What is a LUW in the delta queue?
A) A LUW from the point of view of the delta queue can be an individual
document, a group of documents from a collective run or a whole data packet of
an application
extractor.
Q) Why does the number in the 'Total' column in the overview screen of
Transaction RSA7 differ from the number of data records that is displayed when
you call the detail view?
A) The number on the overview screen corresponds to the total of LUWs (see also
first question) that were written to the qRFC queue and that have not yet been
confirmed. The detail screen displays the records contained in the LUWs. Both,
the records belonging to the previous delta request and the records that do not
meet the selection conditions of the preceding delta init requests are filtered
out. Thus, only the records that are ready for the next delta request are
displayed on the detail screen. In the detail screen of Transaction RSA7, a
possibly existing customer exit is not taken into account.
Q) Why does Transaction RSA7 still display LUWs on the overview screen after
successful delta loading?
A) Only when a new delta has been requested does the source system learn that
the previous delta was successfully loaded to the BW System. Then, the LUWs of
the previous delta may be confirmed (and also deleted). In the meantime, the
LUWs must be kept for a possible delta request repetition. In particular, the
number on the overview screen does not change when the first delta was loaded
to the BW System.
Q) Why are selections not taken into account when the delta queue is filled?
A) Filtering according to selections takes place when the system reads from the
delta queue. This is necessary for reasons of performance.
Q) Why is there a DataSource with '0' records in RSA7 if delta exists and has
also been loaded successfully?
It is most likely that this is a DataSource that does not send delta data to
the BW System via the delta queue but directly via the extractor (delta for
master data using ALE change pointers). Such a DataSource should not be
displayed in RSA7. This error is corrected with BW 2.0B Support Package 11.
Q) Do the entries in table ROIDOCPRMS have an impact on the performance of the
loading procedure from the delta queue?
A) The impact is limited. If performance problems are related to the loading
process from the delta queue, then refer to the application-specific notes (for
example in the CO-PA area, in the logistics cockpit area and so on).
Caution: As of Plug In 2000.2 patch 3 the entries in table ROIDOCPRMS are as
effective for the delta queue as for a full update. Please note, however, that
LUWs are not split during data loading for consistency reasons. This means that
when very large LUWs are written to the DeltaQueue, the actual package size may
differ considerably from the MAXSIZE and MAXLINES parameters.
Q) Why does it take so long to display the data in the delta queue (for example
approximately 2 hours)?
A) With Plug In 2001.1 the display was changed: the user has the option of
defining the amount of data to be displayed, to restrict it, to selectively
choose the number of a data record, to make a distinction between the 'actual'
delta data and the data intended for repetition and so on.
Q) What is the purpose of function 'Delete data and meta data in a queue' in
RSA7? What exactly is deleted?
A) You should act with extreme caution when you use the deletion function in
the delta queue. It is comparable to deleting an InitDelta in the BW System and
should preferably be executed there. You do not only delete all data of this
DataSource for the affected BW System, but also lose the entire information
concerning the delta initialization. Then you can only request new deltas after
another delta initialization.
When you delete the data, the LUWs kept in the qRFC queue for the corresponding
target system are confirmed. Physical deletion only takes place in the qRFC
outbound queue if there are no more references to the LUWs.
The deletion function is for example intended for a case where the BW System,
from which the delta initialization was originally executed, no longer exists
or can no longer be accessed.
Q) Why does it take so long to delete from the delta queue (for example half a
day)?
A) Import PlugIn 2000.2 patch 3. With this patch the performance during
deletion is considerably improved.
Q) Why is the delta queue not updated when you start the V3 update in the
logistics cockpit area?
A) It is most likely that a delta initialization had not yet run or that the
delta initialization was not successful. A successful delta initialization (the
corresponding request must have QM status 'green' in the BW System) is a
prerequisite for the application data being written in the delta queue.
Q) What is the relationship between RSA7 and the qRFC monitor (Transaction
SMQ1)?
A) The qRFC monitor basically displays the same data as RSA7. The internal
queue name must be used for selection on the initial screen of the qRFC
monitor. This is made up of the prefix 'BW, the client and the short name of
the DataSource. For DataSources whose name are 19 characters long or shorter,
the short name corresponds to the name of the DataSource. For DataSources whose
name is longer than 19 characters (for delta-capable DataSources only possible
as of PlugIn 2001.1) the short name is assigned in table ROOSSHORTN.
In the qRFC monitor you cannot distinguish between repeatable and new LUWs.
Moreover, the data of a LUW is displayed in an unstructured manner there.
Q) Why are the data in the delta queue although the V3 update was not started?
A) Data was posted in background. Then, the records are updated directly in the
delta queue (RSA7). This happens in particular during automatic goods receipt
posting (MRRS). There is no duplicate transfer of records to the BW system. See
Note 417189.
Q) Why does button 'Repeatable' on the RSA7 data details screen not only show
data loaded into BW during the last delta but also data that were newly added,
i.e. 'pure' delta records?
A) Was programmed in a way that the request in repeat mode fetches both
actually repeatable (old) data and new data from the source system.
Q) I loaded several delta inits with various selections. For which one is the
delta loaded?
A) For delta, all selections made via delta inits are summed up. This means, a
delta for the 'total' of all delta initializations is loaded.
Q) How many selections for delta inits are possible in the system?
A) With simple selections (intervals without complicated join conditions or
single values), you can make up to about 100 delta inits. It should not be
more.
With complicated selection conditions, it should be only up to 10-20 delta
inits.
Reason: With many selection conditions that are joined in a complicated way,
too many 'where' lines are generated in the generated ABAP
source code that may exceed the memory limit.
Q) I intend to copy the source system, i.e. make a client copy. What will
happen with may delta? Should I initialize again after that?
A) Before you copy a source client or source system, make sure that your deltas
have been fetched from the DeltaQueue into BW and that no delta is pending.
After the client copy, an inconsistency might occur between BW delta tables and
the OLTP delta tables as described in Note 405943. After the client copy, Table
ROOSPRMSC will probably be empty in the OLTP since this table is
client-independent. After the system copy, the table will contain the entries
with the old logical system name that are no longer useful for further delta
loading from the new logical system. The delta must be initialized in any case
since delta depends on both the BW system and the source system. Even if no
dump 'MESSAGE_TYPE_X' occurs in BW when editing or creating an InfoPackage, you
should expect that the delta have to be initialized after the copy.
Q) Is it allowed in Transaction SMQ1 to use the functions for manual control of
processes?
A) Use SMQ1 as an instrument for diagnosis and control only. Make changes to BW
queues only after informing the BW Support or only if this is explicitly
requested in a note for component 'BC-BW' or 'BW-WHM-SAPI'.
Q) Despite of the delta request being started after completion of the
collective run (V3 update), it does not contain all documents. Only another
delta request loads the missing documents into BW. What is the cause for this
"splitting"?
A) The collective run submits the open V2 documents for processing to the task
handler, which processes them in one or several parallel update processes in an
asynchronous way. For this reason, plan a sufficiently large "safety time
window" between the end of the collective run in the source system and the
start of the delta request in BW. An alternative solution where this problem
does not occur is described in Note 505700.
Q) Despite my deleting the delta init, LUWs are still written into the
DeltaQueue?
A) In general, delta initializations and deletions of delta inits should always
be carried out at a time when no posting takes place. Otherwise, buffer
problems may occur: If a user started the internal mode at a time when the
delta initialization was still active, he/she posts data into the queue even
though the initialization had been deleted in the meantime. This is the case in
your system.
Q) In SMQ1 (qRFC Monitor) I have status 'NOSEND'. In the table TRFCQOUT, some
entries have the status 'READY', others 'RECORDED'. ARFCSSTATE is 'READ'. What
do these statuses mean? Which values in the field 'Status' mean what and which
values are correct and which are alarming? Are the statuses BW-specific or
generally valid in qRFC?
A) Table TRFCQOUT and ARFCSSTATE: Status READ means that the record was read
once either in a delta request or in a repetition of the delta request.
However, this does not mean that the record has successfully reached the BW
yet. The status READY in the TRFCQOUT and RECORDED in the ARFCSSTATE means that
the record has been written into the DeltaQueue and will be loaded into the BW
with the next delta request or a repetition of a delta. In any case only the
statuses READ, READY and RECORDED in both tables are considered to be valid.
The status EXECUTED in TRFCQOUT can occur temporarily. It is set before
starting a DeltaExtraction for all records with status READ present at that
time. The records with status EXECUTED are usually deleted from the queue in
packages within a delta request directly after setting the status before
extracting a new delta. If you see such records, it means that either a process
which is confirming and deleting records which have been loaded into the BW is
successfully running at the moment, or, if the records remain in the table for
a longer period of time with status EXECUTED, it is likely that there are
problems with deleting the records which have already been successfully been
loaded into the BW. In this state, no more deltas are loaded into the BW. Every
other status is an indicator for an error or an inconsistency. NOSEND in SMQ1
means nothing (see note 378903).
The value 'U' in field 'NOSEND' of table TRFCQOUT is discomforting.
Q) The extract structure was changed when the DeltaQueue was empty. Afterwards
new delta records were written to the DeltaQueue. When loading the delta into
the PSA, it shows that some fields were moved. The same result occurs when the
contents of the DeltaQueue are listed via the detail display. Why are the data
displayed differently? What can be done?
Make sure that the change of the extract structure is also reflected in the
database and that all servers are synchronized. We recommend to reset the
buffers using Transaction $SYNC. If the extract structure change is not
communicated synchronously to the server where delta records are being created,
the records are written with the old structure until the new structure has been
generated. This may have disastrous consequences for the delta.
When the problem occurs, the delta needs to be re-initialized.
Q) How and where can I control whether a repeat delta is requested?
A) Via the status of the last delta in the BW Request Monitor. If the request
is RED, the next load will be of type 'Repeat'. If you need to repeat the last
load for certain reasons, set the request in the monitor to red manually. For
the contents of the repeat see Question 14. Delta requests set to red despite
of data being already updated lead to duplicate records in a subsequent repeat,
if they have not been deleted from the data targets concerned before.
Q) As of PI 2003.1, the Logistic Cockpit offers various types of update
methods. Which update method is recommended in logistics? According to which
criteria should the decision be made? How can I choose an update method in
logistics?
See the recommendation in Note 505700.
Q) Are there particular recommendations regarding the data volume the
DeltaQueue may grow to without facing the danger of a read failure due to
memory problems?
A) There is no strict limit (except for the restricted number range of the
24-digit QCOUNT counter in the LUW management table - which is of no practical
importance, however - or the restrictions regarding the volume and number of
records in a database table).
When estimating "smooth" limits, both the number of LUWs is important
and the average data volume per LUW. As a rule, we recommend to bundle data
(usually documents) already when writing to the DeltaQueue to keep number of
LUWs small (partly this can be set in the applications, e.g. in the Logistics
Cockpit). The data volume of a single LUW should not be considerably larger
than 10% of the memory available to the work process for data extraction
(in a 32-bit architecture with a memory volume of about 1GByte per work
process, 100 Mbytes per LUW should not be exceeded). That limit is of rather
small practical importance as well since a comparable limit already applies
when writing to the DeltaQueue. If the limit is observed, correct reading is
guaranteed in most cases.
If the number of LUWs cannot be reduced by bundling application transactions,
you should at least make sure that the data are fetched from all connected BWs
as quickly as possible. But for other, BW-specific, reasons, the frequency
should not be higher than one DeltaRequest per hour.
To avoid memory problems, a program-internal limit ensures that never more than
1 million LUWs are read and fetched from the database per DeltaRequest. If this
limit is reached within a request, the DeltaQueue must be emptied by several
successive DeltaRequests. We recommend, however, to try not to reach that limit
but trigger the fetching of data from the connected BWs already when the number
of LUWs reaches a 5-digit value.
Q) I would like to display the date the data was uploaded on the
report. Usually, we load the transactional data nightly. Is there any easy way
to include this information on the report for users? So that they know the
validity of the report.
A) If I understand your requirement correctly, you want to display the date on
which data was loaded into the data target from which the report is being
executed. If it is so, configure your workbook to display the text elements in
the report. This displays the relevance of data field, which is the date on which
the data load has taken place.
Q) Can we filter the fields at Transfer Structure?
Q) Can we load data directly into infoobject with out extraction is it
possible.
Yes. We can copy from other infoobject if it is same. We load data from PSA if
it is already in PSA.
Q) HOW MANY DAYS CAN WE KEEP THE DATA IN PSA, IF WE R SHEDULED DAILY, WEEKLY
AND MONTHLY.
a) We can set the time.
Q) HOW CAN U GET THE DATA FROM CLIENT IF U R WORKING ON OFFSHORE PROJECTS.
THROUGH WHICH NETWORK.
a) VPN…………….Virtual
Private Network, VPN is nothing but one sort of network
where we can connect to the client systems sitting in offshore through RAS
(Remote access server).
Q) HOW CAN U ANALIZE THE PROJECT AT FIRST?
Prepare Project Plan and Environment
Define Project Management
Standards and
Procedures
Define Implementation Standards and Procedures
Testing & Go-live + supporting.
Q) THERE is one ODS AND 4 INFOCUBES. WE SEND DATA AT TIME TO ALL CUBES IF ONE
CUBE GOT LOCK ERROR. HOW CAN U RECTIFY THE ERROR?
Go to TCode sm66 then see which one is locked select that pid from there and
goto sm12
TCode then unlock it this is happened when lock errors are occurred when u
scheduled.
Q) Can anybody tell me how to add a navigational attribute in the BEx report in
the rows?
A) Expand dimension under left side panel (that is infocube panel) select than
navigational attributes drag and drop under rows panel.
Q) IF ANY TRASACTION CODE LIKE SMPT OR STMT.
In current systems (BW 3.0B and R/3 4.6B) these Tcodes don't exist!
Q) WHAT IS TRANSACTIONAL CUBE?
A) Transactional InfoCubes differ from standard InfoCubes in that the former
have an improved write access performance level. Standard InfoCubes are
technically optimized for read-only access and for a comparatively small number
of simultaneous accesses. Instead, the transactional InfoCube was developed to
meet the demands of SAP Strategic Enterprise Management (SEM), meaning that,
data is written to the InfoCube (possibly by several users at the same time)
and re-read as soon as possible. Standard Basic cubes are not suitable for
this.
Q) Is there any way to delete cube contents within update rules from an ODS
data source? The reason for this would be to delete (or zero out) a cube record
in an "Open Order" cube if the open order quantity was 0.
I've tried using the 0recordmode but that doesn't work. Also, would it
be easier to write a program that would be run after the load and delete
the records with a zero open qty?
A) START routine for update rules u can write ABAP code.
A) Yap, you can do it. Create a start routine in Update rule.
It is not "Deleting cube contents with update rules" It is only
possible to avoid that some content is updated into the InfoCube using the
start routine. Loop at all the records and delete the record that has the
condition. "If the open order quantity was 0" You have to think also
in before and after images in case of a delta upload. In that case you may
delete the change record and keep the old and after the change the wrong
information.
Q) I am not able to access a node in hierarchy directly using variables for
reports. When I am using Tcode RSZV it is giving a message that it doesn't
exist in BW 3.0 and it is embedded in BEx. Can any one tell me the other
options to get the same functionality in BEx?
A) Tcode RSZV is used in the earlier version of 3.0B only. From 3.0B onwards,
it's possible in the Query Designer (BEx) itself. Just right click on the
InfoObject for which you want to use as variables and precede further selecting
variable type and proce -
Hi,
Here are some BW interview questions. Make sure you have prepared for all the q's before going for an interview.
1) Please describe your experience with BEx (Business Explorer)
A) Rate your level of experience with BEx and the rationale for youre self-rating
B) How many queries have you developed? :
C) How many reports have you written?
D) How many workbooks have you developed?
E) Experience with jump targets (OLTP, use jump target)
F) Describe experience with BW-compatible ETL tools (e.g. Ascential)
2) Describe your experience with 3rd party report tools (Crystal Decisions, Business Objects a plus)
3) Describe your experience with the design and implementation of standard & custom InfoCubes.
1. How many InfoCubes have you implemented from start to end by yourself (not with a team)?
2. Of these Cubes, how many characteristics (including attributes) did the largest one have.
3. How much customization was done on the InfoCubes have you implemented?
4) Describe your experience with requirements definition/gathering.
5) What experience have you had creating Functional and Technical specifications?
6) Describe any testing experience you have:
7) Describe your experience with BW extractors
1. How many standard BW extractors have you implemented?
2. How many custom BW extractors have you implemented?
8) Describe how you have used Excel as a compliment to BEx
A) Describe your level of expertise and the rationale for your self-rating (experience with macros, pivot tables and formatting)
B)
9) Describe experience with ABAP
10) Describe any hands on experience with ASAP Methodology.
11) Identify SAP functional areas (SEM, CRM, etc.) you have experience in. Describe that experience.
12) What is partitioning and what are the benefits of partitioning in an InfoCube?
A) Partitioning is the method of dividing a table (either column wise or row wise) based on the fields available which would enable a quick reference for the intended values of the fields in the table. By partitioning an infocube, the reporting performance is enhanced because it is easier to search in smaller tables. Also table maintenance becomes easier.
13) What does Rollup do?
A) Rollup creates aggregates in an infocube whenever new data is loaded.
14) What are the inputs for an infoset?
A) The inputs for an infoset are ODS objects and InfoObjects (with master data or text).
15) What internally happens when BW objects like Info Object, Info Cube or ODS are created and activated?
A) When an InfoObject, InfoCube or ODS object is created, BW maintains a saved version of that object but does not make it available for use. Once the object is activated, BW creates an active version that is available for use.
16) What is the maximum number of key fields that you can have in an ODS object?
A) 16.
17) What is the specific advantage of LO extraction over LIS extraction?
A) The load performance of LO extraction is better than that of LIS. In LIS two tables are used for delta management that is cumbersome. In LO only one delta queue is used for delta management.
18) What is the importance of 0REQUID?
A) It is the InfoObject for Request id. OREQUID enables BW to distinguish between different data records.
19) Can you add programs in the scheduler?
A) Yes. Through event handling.
20) What is the importance of the table ROIDOCPRMS?
A) It is an IDOC parameter source system. This table contains the details of the data transfer like the source system of the data, data packet size, maximum number of lines in a data packet, etc. The data packet size can be changed through the control parameters option on SBIW i.e., the contents of this table can be changed.
21) What is the importance of 'start routine' in update rules?
A) A Start routine is a user exit that can be executed before the update rule starts to allow more complex computations for a key figure or a characteristic. The start routine has no return value. Its purpose is to execute preliminary calculations and to store them in a global data structure. You can access this structure or table in the other routines.
22) When is IDOC data transfer used?
A) IDOCs are used for communication between logical systems like SAP R/3, R/2 and non-SAP systems using ALE and for communication between an SAP R/3 system and a non-SAP system. In BW, an IDOC is a data container for data exchange between SAP systems or between SAP systems and external systems based on an EDI interface. IDOCs support limited file size of 1000 bytes. So IDOCs are not used when loading data into PSA since data there is more detailed. It is used when the file size is lesser than 1000 bytes.
23) What is partitioning characteristic in CO-PA used for?
A) For easier parallel search and load of data.
24) What is the advantage of BW reporting on CO-PA data compared with directly running the queries on CO-PA?
A) BW has a better performance advantage over reporting in R/3. For a huge amount of data, the R/3 reporting tool is at a serious disadvantage because R/3 is modeled as an OLTP system and is good for transaction processing rather than analytical processing.
25) What is the function of BW statistics cube?
A) BW statistics cube contains the data related to the reporting performance and the data loads of all the InfoCubes in the BW system.
26) When an ODS is in 'overwrite' mode, does uploading the same data again and again create new entries in the change log each time data is uploaded?
A) No.
27) What is the function of 'selective deletion' tab in the manage->contents of an infocube?
A) It allows us to select a particular value of a particular field and delete its contents.
28) When we collapse an infocube, is the consolidated data stored in the same infocubeinfocube? or is it stored in the new
A) Data is stored in the same cube.
29) What is the effect of aggregation on the performance? Are there any negative effects on the performance?
A) Aggregation improves the performance in reporting.
30) What happens when you load transaction data without loading master data?
A) The transaction data gets loaded and the master data fields remain blank.
31) When given a choice between a single infocube and multiple InfoCubes with a multiprovider, what factors does one need to consider before making a decision?
A) One would have to see if the InfoCubes are used individually. If these cubes are often used individually, then it is better to go for a multiprovider with many cubes since the reporting would be faster for an individual cube query rather than for a big cube with lot of data.
32) How many hierarchy levels can be created for a characteristic info object?
A) Maximum of 98 levels.
33) What is open hub service?
A) The open hub service enables you to distribute data from an SAP BW system into external data marts, analytical applications, and other applications. With this, you can ensure controlled distribution using several systems. The central object for the export of data is the Infospoke. Using this, you can define the object from which the data comes and into which target it is transferred. Through the open hub service, SAP BW becomes a hub of an enterprise data warehouse. The distribution of data becomes clear through central monitoring from the distribution status in the BW system.
34) What is the function of 'reconstruction' tab in an infocube?
A) It reconstructs the deleted requests from the infocube. If a request has been deleted and later someone wants the data records of that request to be added to the infocube, one can use the reconstruction tab to add those records. It goes to the PSA and brings the data to the infocube.
35) What are secondary indexes with respect to InfoCubes?
A) Index created in addition to the primary index of the infocube. When you activate a table in the ABAP Dictionary, an index is created on the primary key fields of the table. Further indexes created for the table are called secondary indexes.
36) What is DB connect and where is it used?
A) DB connect is database connecting piece of program. It is used in connecting third party tools with BW for reporting purpose.
37) Can we extract hierarchies from R/3 for CO-PA?
A) No We cannot, NO hierarchies in CO/PA�?.
38) Explain field name for partitioning in CO-PA
A) The CO/PA partitioning is used to decrease package size (eg: company code)
39) What is V3 update method ?
A) It is a program in R/3 source system that schedules batch jobs to update extract structure to data source collectively.
40) Differences between serialized and non-serialized V3 updates
41) What is the common method of finding the tables used in any R/3 extraction
A) By using the transaction LISTSCHEMA we can navigate the tables.
42) Differences between table view and infoset query
A) An InfoSet Query is a query using flat tables.
43) How to load data from one InfoCube to another InfoCube ?
A) Thro DataMarts data can be loaded from one InfoCube to another InfoCube.
44) What is the significance of setup tables in LO extractions ?
A) It adds the Selection Criteria to the LO extraction.
45) Difference between extract structure and datasource
A) In Datasource we define the data from diff source sys,where as in extract struct it contains the replicated data of datasource n where in we can define extract rules, n transfer rules
B) Extract Structure is a record layout of InfoObjects.
C) Extract Structure is created on SAP BW system.
46) What happens internally when Delta is Initialized
47) What is referential integrity mechanism ?
A) Referential integrity is the property that guarantees that values from one column depend on values from another column.This property is enforced through integrity constraints.
48) What is activation of extract structure in LO ?
49) What is the difference between Info IDoc and data IDoc ?
50) What is D-Management in LO ?
A) It is a method used in delta update methods, which is based on change log in LO.
Plz experts.. provide the answers for the questions..
Thanx in advance.
SunilHi,
In my case i dont have an experience in BW. I went straight to academy.It is like i am starting a new career.Are the questions also apply to me . -
Hi SAP FI/CO GURUS ...... PLEASE GIVE ME INTERVIEW QUESTIONS ON SAP FI/CO
Hi FI/CO gurus
I require your great help to get my brother into SAP House. He had done his FI/CO training and he is trying as fresher into SAP. So i request you to please give me interview questions on SAP FI/CO in topic wise. The reason i am asking here in this forum is, a lot of gurus who are having great experience are there in this group. if i get help from these gurus, that will be great help to my brother into get into SAP FI/CO.
So i request you to please send me interview questions on SAP FI and CO in topic wise. Awaiting for your reply.
Regards
RajHi,
Please find below few questions on FI. I think those are very useful for intervew
SAF FI Technical Interview Questions 1
1. Tell me about FI Organizational structure?
Ans: Client
|
Operating Concern
|
Controlling area1 Controlling Area 2
|
Co. Code 1 Co. Code 2
|
Bus area 1 Bus area2 Bus Area3 Bus Area 4
2. How many Normal and Special periods will be there in fiscal year, why do u use special periods?
Ans: 12 Normal posting period and 4 special periods are in the fiscal year which can be used for posting tax and audit adjustments to a closed fiscal year.
3.Where do you open and close periods?
Ans: PPV is used to open and close the periods based on a/c types considering GL Accounts. Tr. Code. OB52.
4.What do you enter in Company code Global settings?
Ans: 4 digit Alphanumeric key.
Name of the company
City
Country
Currency
Language
Address
5.What is document type, and what does it control? Examples.
Ans: Document type is nothing vouchers containing line items. Several business transac! tions can be identified within a particular document type.
It controls the document number ranges.
It controls the Header part of document
IT controls the line item level of the document
Helps filing of physical document
6. What is posting key and what does it control?
Ans: These are special classification keys. Two character numerical key it controls the entry of line items.
Posting key determines Account type, Debit/credit posting, Field status of transaction.
7. What is field status group, what does it control?
Ans: FSG is mandatory field in ! GL Creation. You use this field to define which fields are displayed when you post business transactions to a G/L account.
A field may have one of the following statuses.
- Suppressed
- Display
- Optional
- Required
8. What is chart of account and how many charts of accounts can be assigned to a company?
Ans: Chart of account is a list of all G/L accounts used by one or several company codes.
For each G/L account, the chart of accounts contains the account number, account name, and the information that controls how an account functions and how a G/L account is created in a Company code.
You have to assign a chart of accounts to each company code. This chart of accounts is the Operating chart of accounts and is used for the daily postings in this company code.
You have the following options when using multiple company codes.
You can use the same chart of accounts for all company codes
If the company codes all have the same requirements for the chart of accounts set up, assign all of the individual company codes to the same chart of accounts. This could be the case if all company codes are in the same country.
In addition to the operating chart of accounts, you can use two additional charts of accounts If the individual company codes need different charts of accounts, you can assign up to two charts of accounts in addition to the operating chart of accounts. This could be the case if company codes lie in multiple countries.
The use of different charts of accounts has no effect on the balance sheet and profit and loss statement. When creating the balance sheet or the profit and loss statement, you can choose whether to balance the co! mpany codes which use different charts of accounts together or separately.
9. What does definition of a chart of account contains?
Ans: chart of account key
Name
Maintenance language
Length of the GL Account Number
Controlling Integration
Group chart of accounts (Consolidation)
Block Indicator
10. Can one COA be assigned to several companies?
Ans: yes. One COA can be assigned to several companies.
11) What is account group and what does it control?
Ans: Account group determines which fields you can configure on the G/L master record. It is necessary to have at least two one for B/S and another one for P&L a/c.
It controls the Number ranges of GL A/C.
The status of fields of the master record of GL belongs to company code area.
12) What is reconciliation account; can you directly enter documents in that a/c?
Ans: When you p! ost items to a subsidiary ledger, the system automatically posts the same data to the general ledger. Each subsidiary ledger has one or more reconciliation accounts in the general ledger.
We cant use reconciliation account for direct postings.
13) How do you control field status of GL master records and from where do you control!
Ans: Field status variant is maintained all FSGs.
14) What are the segments of GL master record?
Ans:
- COA Segment
A/C group
Nature of account
Short text
GL a/c long text
Trading partner
Group Account Number
- Company code segment
Account currency
Tax
Reconciliation a/c for a/c type
OIM,LID,FSG.
15) What does Field status group assigned to a GL master record controls?
Ans: It controls the account assignments that are made to the account. Specifically the field status group controls whether postings to cost centers, internal orders, profitability segments and so on are required, not allowed (suppressed), or optional.
16) What is Country and operational chart of account? Why do you use group chart of account?
Ans: Operational chart of account Day to day activities It is mandatory.
Country COA Its used for legal specific requirement of each country. Its additional and optional.
Group COA used for consolidation of Company codes. This is for group consolidation purpose.
17) What are all the segments in a Customer/Vendor master record?
Ans: Segments in Customer Segments in Vendor
- General Data segment General data segment
- Company code segment Company code segment
- Sales area segment Purchasing organization Segment
18) What is open line item management? What do you mean by clearing open line items?
Ans: Open item management is further reconciliation function. OIM allows you to display the open and cleared items and amounts in an account. OIM should be used if an offsetting entry is made for every line item posted in the account. The a/c is reconciled and cleared against another account. Ex. Salary clearing account and GR/IR Clearing account.
19) What is residual payment and part payment?
Ans: Residual payment it clears original invoice with incoming amount and create new line item for remaining outstanding amount.
Partial payment it leaves the original invoice amount and creates new
line item for incoming amount.
20) What is internal and external number ranges?
Ans: Internal Number Ranges: Doc. No will be provided by the system automatically in serial order allotting the next available progressive number. The number must be in numerical.
External Number ranges: Doc. No will be given manually by the end user. System will not lock no automatically in this case. User can pick the number randomly. Number may be an alpha numeric. -
When I run update status reports, some computers show "not needed" for an update that is clearly needed. For instance, if I run a compliance report and look for the status of KB2775511, I get a lot of computers showing "Update is not required"
- however, these computers don't have KB2775511 installed, and clearly need it.
In fact, each client believes it needs the update because it's listed as "Missing" when I check the CCM_UpdateStatus WMI class at "root/ccm/SoftwareUpdates/UpdatesStore". Furthermore, if I deploy the update via SCCM to one of these computers,
the computer recognizes it needs the update and installs it. So it seems that the report (or wherever the reports gets its information) is what's at fault here.
The other odd thing I notice about the report is that the computers with incorrect statuses have very recent dates for "Last State Received", and no date for "Last State Change". This is different from computers that are correctly
reporting their status, which have values for both, typically with older dates.
Any idea why my reports are incorrect?
Eric HodgesHi,
Have you checked the following log files:
StateMessage.log(Client)
It records details about software updates state messages that are created and sent to the management point.
MP_Relay.log(Site system server)
It records the transfer of files that are collected from the client.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to Inactive Item Status at Org Level
How to Inactive Item Status at Org Level and what are the implications of doing so.
What are the prerequisits before inactivating an item status.
The Procedure I am following is
Changing the Item Attribute control to Org Level for Item Status
Log on to Organization Items and Selecting the Item Status as Inactive.
Can any one please let me know what are the pre requisits before Inactivating an Items and The procedure I am following is correct.
Thanks
Srinivasa GarikipatiHi;
Please check serial attribute and org attribute problems with item master and see its helpful
Also you can check:
http://oz1-n.blogspot.com/2009/06/interview-questions-for-oracle-11i-apps.html part
1. Once an item is assigned to an organization, is it possible to remove this association at a later time?
2. How do I inactivate an item?
Regard
Helios -
sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.
Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
DirectAccess Windows Server 2012 R2 and Windows 8.1 - status connecting
I've successfully deployed DirectAccess on Windows Server 2012 R2 in a 2 node NLB cluster. Everything in the console is green and I can see clients connecting.
Windows 7 clients can connect and with the DirectAccess connectivity assistant installed show as connected and I can access resources.
On a Windows 8.1 client I can access resource and run the troubleshooting tool which reports no errors, but if I look at connections it shows as connecting and the status never changes to connected. Clients work correctly when on the internal network.
I've looked at available hotfixes, but not found anything for when the status is incorrectly shown.
Any ideas before I raise a support call?
James SaundersHi,
You current information hardly determine which part may occur error, I found the similar symptom on the following third party article, may can give you some help.
The similar issue third party article:
Windows 8 DirectAccess client keeps saying "Connecting"
http://tfs.letsblog.it/post/2013/07/10/Windows-8-DirectAccess-client-keeps-saying-Connecting.aspx
More information:
The Network Connection Status Icon
http://blogs.technet.com/b/networking/archive/2012/12/20/the-network-connection-status-icon.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes
Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack: at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
SebHi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Faq's in Interview point of view
Hi All,
I have a favour from all of you, I want to know what are the type of questions that would be asked in interview if I put these objects
Reports :
Created Material Master report for existing stock details.
Created Material Master report for various storage locations.
BDC :
Migrated legacy data from Non SAP to SAP using SE11 transaction.
Migrated legacy data using MK01 transaction.
LSMW :
Migrated legacy data using MM01 transaction.
Reports
Generated a report to print the purchase order details of goods received with purchase order number.
Generated a program to create a report which calculates the material cost, it selects all the material issued for the entered service order number from stock.
Sap Scripts
Worked on Modifying the predefined Sap Script for Distributing Customer Billing.
Smart Forms
Worked on creating Job requisition form.
Reports:
Developed a ALV Grid Interactive report to evaluate the Vendor performance for a specified purchase organization in a particular period.
Generated a ALV grid interactive report that displays the Material numbers and
corresponding Maintenance status in the basic list and upon selection of a particular
material no it gives the detailed information of that material no in two different levels.
BDC:
Interface to upload change the sales order for open sales order and partial sales order using the transaction VA02 through batch input method.
SAP Scripts :
Modified the Order layout set with slight changes in the terms and conditions, date
format.
Changes made to the invoice layout set as per the client requirement
i would very much indebted to each and everyone whoever is helping to secure a job in ABAP..
Thanking u in advance...
srinivas
u can also mail me @ [email protected]1. How data is stored in cluster table?
Each field of cluster table behaves as tables which contains the no. of entries.
2. What are client dependant objects in abap/sap?
SAP Script layout, text element, and some DDIC objects.
3. On which even we can validate the input fields in module progams?
In PAI (Write field statement on field you want to validate, if you want to validate group of fields put in chain and End chain statement.)
4. In selection screen I have three fields, plant mat no and material group. If I input plant how do I get the mat no and material group based on plant dynamically?
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MATERIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' to get material and material group for the plant.
5. How do you get output from IDOC?
Data in IDOc is stored in segments, the output from Idoc is obtained by reading the data stored in its respective segments.
6. When top of the page event is triggered?
After excuteing first write statement in start-of-selection event.
7. Can we create field without data element and how?
In SE11 one option is available above the fields strip. Data element/ direct type.
8. How do we debug sapscript?
Go to SE71 give lay set name , go to utilities select debugger mode on.
9. Which transaction code can I used to analyze the performance of ABAP program.
TCode AL21.
10. How can I copy a standard table to make my own z_table.
Go to transaction SE11. Then there is one option to copy table. Press that button. Enter the name of the standard table and in the Target table enter Z table name and press enter.
Following are some of the answers which I gave upto my knowledge.
1. What is the use of 'outerjoin'
Ans. With the use of outer join you can join the tables even there is no entry in all the tables used in the view.
In case of inner join there should be an entry in al the tables use in the view.
2. When to use logical database?
Ans. Advantage of Logical databases:
less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
3. What is the use of 'table index'?
Ans .Index is used for faster access of data base tables.
4. What is the use of 'FOR ALL ENTRIES'?
Ans. To avoid nested select statements we use SELECT FOR ALL ENTRIES statement.
If there r more than 10000 records SELECT FOR ALL ENTRIES is used.
Performance wise SELECT FOR ALL ENTRIES is better to use.
5. Can you set up background processing using CALL TRANSACTION?
Yes,Using No Screen Mode.
6. What are table buffers?
Table buffers reside locally on each application server in the system. The data of buffered tables can thus be accessed
directly from the buffer of the application server. This avoids the time-consuming process of accessing the database.
Buffering is useful if table needs to be accessed more no. of times in a program.
ABAP Technical Interview Questions:
1. What is the typical structure of an ABAP program?
2. What are field symbols and field groups.? Have you used "component idx of structure" clause with field groups?
3. What should be the approach for writing a BDC program?
4. What is a batch input session?
5. What is the alternative to batch input session?
6. A situation: An ABAP program creates a batch input session. We need to submit the program and the batch session in background. How to do it?
7. What is the difference between a pool table and a transparent table and how they are stored at the database level?
8. What are the problems in processing batch input sessions? How is batch input process different from processing on line?
9. What do you define in the domain and data element?
10. What are the different types of data dictionary objects?
11. How many types of tables exist and what are they in data dictionary?
12. What is the step-by-step process to create a table in data dictionary?
13. Can a transparent table exist in data dictionary but not in the database physically?
14. What are the domains and data elements?
15. Can you create a table with fields not referring to data elements?
16. What is the advantage of structures? How do you use them in the ABAP programs?
17. What does an extract statement do in the ABAP program?
18. What is a collect statement? How is it different from append?
19. What is open sql vs native sql?
20. What does an EXEC SQL stmt do in ABAP? What is the disadvantage of using it?
21. What is the meaning of ABAP editor integrated with ABAP data dictionary?
22. What are the events in ABAP language?
23. What is an interactive report? What is the obvious diff of such report compared with classical type reports?
24. What is a drill down report?
25. How do you write a function module in SAP? Describe.
26. What are the exceptions in function module?
27. What is a function group?
28. How are the date abd time field values stored in SAP?
29. What are the fields in a BDC_Tab Table?
30. Name a few data dictionary objects?
31. What happens when a table is activated in DD?
32. What is a check table and what is a value table?
33. What are match codes? Describe?
34. What transactions do you use for data analysis?
35. What is table maintenance generator?
36. What are ranges? What are number ranges?
37. What are select options and what is the diff from parameters?
38. How do you validate the selection criteria of a report? And how do you display initial values in a selection screen?
39. What are selection texts?
40. What is CTS and what do you know about it?
41. When a program is created and need to be transported to prodn does selection texts always go with it? if not how do you make sure? Can you change the CTS entries? How do you do it?
42. What is the client concept in SAP? What is the meaning of client independent?
43. Are programs client dependent?
44. Name a few system global variables you can use in ABAP programs?
45. What are internal tables? How do you get the number of lines in an internal table? How to use a specific number occurs statement?
46. How do you take care of performance issues in your ABAP programs?
47. What are datasets?
48. How to find the return code of a stmt in ABAP programs?
49. What are interface/conversion programs in SAP?
50. Have you used SAP supplied programs to load master data?
2. Adapted from response by Maram Roja on Tuesday, June 15, 2004
1. What are the techniques involved in using SAP supplied programs? Do you prefer to write your own programs to load master data? Why?
2. What are logical databases? What are the advantages/disadvantages of logical databases?
3. What specific statements do you using when writing a drill down report?
4. What are different tools to report data in SAP? What all have you used?
5. What are the advantages and disadvantages of ABAP query tool?
6. What are the functional areas? User groups? How does ABAP query work in relation to these?
7. Is a logical database a requirement/must to write an ABAP query?
8. What is the structure of a BDC sessions.
9. What are Change header/detail tables? Have you used them?
10. What do you do when the system crashes in the middle of a BDC batch session?
11. What do you do with errors in BDC batch sessions?
12. How do you set up background jobs in SAP? What are the steps? What are the event driven batch jobs?
13. Is it possible to run host command from SAP environment? How do you run?
14. What kind of financial periods exist in SAP? What is the relevant table for that?
15. Does SAP handle multiple currencies? Multiple languages?
16. What is a currency factoring technique?
17. How do you document ABAP programs? Do you use program documentation menu option?
18. What is SAPscript and layout set?
19. What are the ABAP commands that link to a layout set?
20. What is output determination?
ABAP Interview Questions
1.Without using Tcode SE11, How can we enter the values in to the table???
2.What is the difference between Collect statement and Append Statement???
3.What do you mean by correction and Transportation system???
4.What is the difference between User Exits and BADI????
5.How can we identify User exits in our screen???
6.What do you mean by Inbound and Outbound interface???
7.In realtime do we configure ALE systems or Administator will take care of that??
8.How to release an object???
9.What is the flow of a Sales document???
10.What is the flow of Purchase order???
12.What is the flow of Invoice???
13.What are the standard IDOC's used???
14.What do you mean by table control???Where will we use this???
15.What are field symbols??Where will we use these symbols???
Deepti
1. There are other ways of entering data into a DB table. ex. B D C
2. Collect statement collect/adds the records basing on a key field. allows to create summarised data sets.
Append will append/add a record at the end of existing records
8. to release an object - use se10/se9
9. sales doc flow: S. A. - S. O. - Delivery - Billing
12. Delivery - invoice.
15. field symbols are used for dynamic allocation. at runtime u can assign a concrete field to field-symbol.
Kishore
1. you can go to abap editor (se38) and use insert statement for insertion update for update and modify for modifications.
2. collect will not allow duplicate entries, while append can allow duplicates.
3. if any changes are made to objects they are to be transported to different systems i.e, change and transport.
4. in user exits we go by general method for enhancements while BADIs we use objects (oops concepts)
methods for enhancement.
14. table controls are enhanced version for step loops where we can expand rows .main difference between these two
is step loop can be expanded to two lines table controls can`t.
15. field symbols are just like pointers concept which are used in C language. We use them when we want to refer to
the fields considered,it doesnt allocate any memory for it.
Venu Rapolu
1. Ans: Using BDC., LSMW,,ALE., BAPI
2. Ans: Collect: it adds the numeric fields to the existing non numeric key field records., thereby avoiding duplicate
values., and append will simply adds the record
3 . Ans: The CTS contains work bench organizer and transport system :
The workbench organizer is used to record and contol changes to the ABAP/4 development objects;
The transport system is used to move objects from an SAP dev.system to production system
6. Ans: Outbound interface is used to send IDocs to the ALE server.,
Inbound interface is used to Analyse the received Idoc.
7. Ans: We (ABAPers) don't do.
8. Ans: se09 or se10
13. Ans: MATMAS
CREMAS
DEBMAS
GLMAST etc...
14. Ans: to display records in table format., we use in Screens
15. Ans: we assign the field content at run time with ASSIGN stmt.
Satish D
1. goto se16 u can view the table contents
2. collect will collects all the numeric fields of nonnumeric field values
append will append record at the end of table
3. when we are creatiing new task like dev. a new prg.. after completion of dev. that will be trnsported to testing system or production system to do that we are assigning an
transport request from our dev.class(system) by using se09
4. badis are dev. by class and inheritence methods where as user exitsdev by SAP only and empty shells filled wit user logic
5. go to system then status
6. outbound generating an idoc in ale layer with master_idoc_create_messgetype,
inbound is receivng system with idoc_inbound_process, gives an return variable wether it is sucess or not
7. no we have to configur that
8. go to se09 or se01 there write your task no and use release button it will asks whats the other system name
and number enter them and relase by pressing jeep button
9. inquiry
quotation
sales order
shipping
delivery
invoice
return goods
12. after creation of delivry note invoice is prepared
13. master_idoc_distribute will generate standard idoc
Deepti
I am enclosing some of answers which I know.
1. We can use t.Code SE16 to enter values into table only if table maintainence is allowed for that table.
2. Append will add new entries into the table where as collect add into the numeric type fields if other charatcer fields
matches to your selection criteria.
3. CTS used for creation of ABAP development transport requests.The transaction code for this is SE10.
4. UserExits r used for adding additional functionality to the existing SAP standard transactions.Using UserExits we can add additional functionality standard SAP functionality without making any changes to the original code.BADI is a standardized interface for ABAP sources that enables partners and customers to enhance SAP-delivered programs in their namespace.
5 .We can identify User exits by using transactions CMOD and SMOD.
6. After entering transaction code SE10 select the transport request which u want to transport and click on transport icon(Truck symbol) to release it.
10. Purchase Requistion->RFQ->Vendor Evaluation->Purchase Order(ME21).
14. Table control is the only facility provide thru dialog programming when we come acrosse the use of updating standared,deletion,insertion and all database operations.
15. Field symbols r pointers to the existing data types(like 'C') which does not allocate any memory space. These are used faster access of data.
Answers to some ABAP Interview Questions:
Questions which I have faced in an interview:
1) What is runtime analysis? Have you used this?
2) What is meant by performance analysis? Have done anything to improve the performance?
3) How to transfer the objects? Have to transferred any objects?
4) How did you test the developed objects?
5) What is the difference between SAP Memory and ABAP Memory?
6) In order to upload Purchase order details, how you handle multiple values for a single field?
Eg: Item field may contain no. of values for a record
7) What is the procedure you followed to upload the data?
8) How did you handle errors in Call Transaction?
9) Among the Call Transaction and Session Method, which is faster?
10) What are the difference between Interactive and Drill Down Reports?
11) How to pass the variables to forms?
12) How to create a link between modified form and modified print program?
13) What is the table, which contain the details of all the name of the programs and forms?
14) How did you test the form u developed? How did you taken print?
15) What are Standard Texts?
16) What is the difference between Clustered Tables and Pooled Tables?
17) What is pf-status?
18) Among "Move" and "Move Corresponding", which is efficient one?
19) What are the output type and Tcodes?
20) Where we use Chain and Endchain?
21) Do you use select statement in loop endloop, how will be the performance? To improve the performance?
22) In select-options, how to get the default values as current month first date and last date by default?
Eg: 1/12/2004 and 31/12/2004
Go thru these answers:
1) What is runtime analysis? Have you used this?
It's checks program execution time in microseconds. When you go to se30.if you give desired program name in performance file. It will take you to below screen. You can get how much past is your program.
2) What is meant by performance analysis? Have done
3) How to transfer the objects? Have you transferred any objects?
4) How did you test the developed objects?
I was testing a developed object. There are two types of testing
- Negative testing
- Positive testing
In negative testing we will give negative data in input and we check any errors occurs.
In positive testing we will give positive data in input for checking errors.
8) How did you handle errors in Call Transaction?
We can create a internal table like 'bsgmcgcoll'. All the messages will go to internal table. We can get errors in this internal table.
Below messages are go to internal table. when you run the call transaction.
- Message type
- Message id
- Message Number
- Variable1
- Variable2
- Variable3
9) Among the Call Transaction and Session Method, which is faster?
Call transaction is faster then session method. But usually we use session method in real time...because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct.
10) What are the difference between Interactive and Drill Down Reports?
ABAP/4 provides some interactive events on lists such as AT LINE-SELECTION (double click) or AT USER-COMMAND (pressing a button). You can use these events to move through layers of information about individual items in a list.
Drill down report is nothing but interactive report...drilldown means above paragraph only.
11) How to pass the variables to forms?
12) What is the table, which contain the details of all the name of the programs and forms?
Table contains vertical and horizontal lines. We can store the data in table as blocks. We can scroll depends upon your wish. And these all are stored in database (data dictionary).
Which contain the details of all the name of the programs and forms? (I don't know).
13) How did you test the form u developed? How did you taken print?
14) What are Standard Texts?
16) What is the difference between Clustered Tables and Pooled Tables?
A pooled table is used to combine several logical tables in the ABAP/4 dictionary. Pooled tables are logical tables that must be assigned to a table pool when they are defined.
Cluster table are logical tables that must be assigned to a table cluster when they are defined.
Cluster table can be used to store control data they can also used to store temporary data or text such as documentation.
17) What is pf-status?
Pf status is used in interactive report for enhancing the functionality. If we go to se41, we can get menus, items and different function keys, which we are using for secondary list in interactive report.
18) Among "Move" and "Move Corresponding", which is efficient one?
I guess, 'move corresponding' is very efficient then 'move' statement. Because usually we use this stamtent for internal table fields only...so if we give move corresponding. Those fields only moving to other place (what ever you want).
19) What are the output type and Tcodes?
20) Where we use Chain and End chain?
21) Do you use select statement in loop end loop, how will be the performance? To improve the performance?
22) In select-options, how to get the default values as current month first date and last date by default?
Eg: 1/12/2004 and 31/12/2004
SAP ABAP interview questions
Thanks to the reader who sent in this question set:
1. What is an ABAP data dictionary?- ABAP 4 data dictionary describes the logical structures of the objects used in application development and shows how they are mapped to the underlying relational database in tables/views.
2. What are domains and data element?- Domains:Domain is the central object for describing the technical characteristics of an attribute of an business objects. It describes the value range of the field. Data Element: It is used to describe the semantic definition of the table fields like description the field. Data element describes how a field can be displayed to end-user.
3. What is foreign key relationship?- A relationship which can be defined between tables and must be explicitly defined at field level. Foreign keys are used to ensure the consistency of data. Data entered should be checked against existing data to ensure that there are now contradiction. While defining foreign key relationship cardinality has to be specified. Cardinality mentions how many dependent records or how referenced records are possible.
4. Describe data classes.- Master data: It is the data which is seldomly changed. Transaction data: It is the data which is often changed. Organization data: It is a customizing data which is entered in the system when the system is configured and is then rarely changed. System data:It is the data which R/3 system needs for itself.
5. What are indexes?- Indexes are described as a copy of a database table reduced to specific fields. This data exists in sorted form. This sorting form ease fast access to the field of the tables. In order that other fields are also read, a pointer to the associated record of the actual table are included in the index. Yhe indexes are activated along with the table and are created automatically with it in the database.
6. Difference between transparent tables and pooled tables.- Transparent tables: Transparent tables in the dictionary has a one-to-one relation with the table in database. Its structure corresponds to single database field. Table in the database has the same name as in the dictionary. Transparent table holds application data. Pooled tables. Pooled tables in the dictionary has a many-to-one relation with the table in database. Table in the database has the different name as in the dictionary. Pooled table are stored in table pool at the database level.
7. What is an ABAP/4 Query?- ABAP/4 Query is a powerful tool to generate simple reports without any coding. ABAP/4 Query can generate the following 3 simple reports: Basic List: It is the simple reports. Statistics: Reports with statistical functions like Average, Percentages. Ranked Lists: For analytical reports. - For creating a ABAP/4 Query, programmer has to create user group and a functional group. Functional group can be created using with or without logical database table. Finally, assign user group to functional group. Finally, create a query on the functional group generated.
8. What is BDC programming?- Transferring of large/external/legacy data into SAP system using Batch Input programming. Batch input is a automatic procedure referred to as BDC(Batch Data Communications).The central component of the transfer is a queue file which receives the data vie a batch input programs and groups associated data into sessions.
9. What are the functional modules used in sequence in BDC?- These are the 3 functional modules which are used in a sequence to perform a data transfer successfully using BDC programming: BDC_OPEN_GROUP - Parameters like Name of the client, sessions and user name are specified in this functional modules. BDC_INSERT - It is used to insert the data for one transaction into a session. BDC_CLOSE_GROUP - This is used to close the batch input session.
10. What are internal tables?- Internal tables are a standard data type object which exists only during the runtime of the program. They are used to perform table calculations on subsets of database tables and for re-organising the contents of database tables according to users need.
11. What is ITS? What are the merits of ITS?- ITS is a Internet Transaction Server. ITS forms an interface between HTTP server and R/3 system, which converts screen provided data by the R/3 system into HTML documents and vice-versa. Merits of ITS: A complete web transaction can be developed and tested in R/3 system. All transaction components, including those used by the ITS outside the R/3 system at runtime, can be stored in the R/3 system. The advantage of automatic language processing in the R/3 system can be utilized to language-dependent HTML documents at runtime.
12. What is DynPro?- DynPro is a Dynamic Programming which is a combination of screen and the associated flow logic Screen is also called as DynPro.
13. What are screen painter and menu painter?- Screen painter: Screen painter is a tool to design and maintain screen and its elements. It allows user to create GUI screens for the transactions. Attributes, layout, filed attributes and flow logic are the elements of Screen painter. Menu painter: Menu painter is a tool to design the interface components. Status, menu bars, menu lists, F-key settings, functions and titles are the components of Menu painters. Screen painter and menu painter both are the graphical interface of an ABAP/4 applications.
14. What are the components of SAP scripts?- SAP scripts is a word processing tool of SAP which has the following components: Standard text. It is like a standard normal documents. Layout sets. - Layout set consists of the following components: Windows and pages, Paragraph formats, Character formats. Creating forms in the R/3 system. Every layout set consists of Header, paragraph, and character string. ABAP/4 program.
15. What is ALV programming in ABAP? When is this grid used in ABAP?- ALV is Application List viewer. Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain up to 90 columns in the display with the wide array of display options.
16. What are the events in ABAP/4 language?- Initialization, At selection-screen, Start-of-selection, end-of-selection, top-of-page, end-of-page, At line-selection, At user-command, At PF, Get, At New, At LAST, AT END, AT FIRST.
17. What is CTS and what do you know about it?- The Change and Transport System (CTS) is a tool that helps you to organize development projects in the ABAP Workbench and in Customizing, and then transport the changes between the SAP Systems and clients in your system landscape. This documentation provides you with an overview of how to manage changes with the CTS and essential information on setting up your system and client landscape and deciding on a transport strategy. Read and follow this documentation when planning your development project.
18. What are logical databases? What are the advantages/ dis-advantages of logical databases?- To read data from a database tables we use logical database. A logical database provides read-only access to a group of related tables to an ABAP/4 program. Advantages: i)check functions which check that user input is complete, correct,and plausible. ii)Meaningful data selection. iii)central authorization checks for database accesses. iv)good read access performance while retaining the hierarchical data view determined by the application logic. dis advantages: i)If you donot specify a logical database in the program attributes,the GET events never occur. ii)There is no ENDGET command,so the code block associated with an event ends with the next event statement (such as another GET or an END-OF-SELECTION).
19. What is a batch input session?- BATCH INPUT SESSION is an intermediate step between internal table and database table. Data along with the action is stored in session ie data for screen fields, to which screen it is passed, program name behind it, and how next screen is processed.
20. How to upload data using CATT ?- These are the steps to be followed to Upload data through CATT: Creation of the CATT test case & recording the sample data input. Download of the source file template. Modification of the source file. Upload of the data from the source file.
21. What is Smart Forms?- Smart Forms allows you to create forms using a graphical design tool with robust functionality, color, and more. Additionally, all new forms developed at SAP will be created with the new Smart Form solution.
22. How can I make a differentiation between dependent and independent data?- Client dependent or independent transfer requirements include client specific or cross client objects in the change requests. Workbench objects like SAPscripts are client specific, some entries in customizing are client independent. If you display the object list for one change request, and then for each object the object attributes, you will find the flag client specific. If one object in the task list has this flag on, then that transport will be client dependent.
23. What is the difference between macro and subroutine? - Macros can only be used in the program the are defined in and only after the definition are expanded at compilation / generation. Subroutines (FORM) can be called from both the program the are defined in and other programs . A MACRO is more or less an abbreviation for some lines of code that are used more than once or twice. A FORM is a local subroutine (which can be called external). A FUNCTION is (more or less) a subroutine that is called external. Since debugging a MACRO is not really possible, prevent the use of them (Ive never used them, but seen them in action). If the subroutine is used only local (called internal) use a FORM. If the subroutine is called external (used by more than one program) use a FUNCTION.
Please check these links.
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://sap.ittoolbox.com/documents/document.asp?i=3240
http://www.techinterviews.com/?p=198
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
regards,
srinivas -
BMC Remedy ticket generation and view its status in OIM using Web Service
Hi All,
I want to Integrate and on-board Remedy system (BMC) with the Oracle Identity Manager (OIM) for my client. It has a standard way for external applications to exchange Remedy ticket data with the Remedy system. Remedy system picks up information from the external interface database table for inbound Remedy tickets and direct it to the appropriate Remedy forms and workflow. (In short it raises tickets for provisioning / deprovisioning / error processing for Target System like ACF2 etc).
Use Cases:
*1.* Visibility of Ticket Status
The status of a Remedy ticket could be viewed by the user by clicking on Remedy Resource object instance found from the "My Resources" link after logging into OIM. Typically the user form should be visible.
Visibility of Ticket Status (Alternative)
The scope of customization of the "My Resources" link to add e.g. "My Tickets" which would show all the Remedy tickets that OIM has raised for the user.
*2.* Web Services
The Remedy application would notify OIM when the status of a ticket is changed within the Remedy System boundary. Ideally a web service hosted by the security team would get called by the Remedy Application and OIM would be updated by the service
This is an urgent requirement and your feedback would be very valuable and highly appreciated. I am looking forward for a solution for both the use cases but the priority is on 2nd use case i.e the web service part using SPML.
Regards,
SourishDuplicate:https://social.technet.microsoft.com/Forums/en-US/796fad9e-9f69-40f0-98aa-2816793fc38c/bmc-remedy-integration-with-scorch-and-ad?forum=sco3pip
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Failed to load resource: the server responded with a status of 404 (Not Found)
I uploaded 2 x small Wordpress sites to Azure this morning using the local Git repository on my iMac. They worked fine when I checked them earlier and now I see the websites are not loading correctly with 30+ errors on each effecting all .css, .js and
.jpg files - using view source, these are the error messages.
Failed to load resource: the server responded with a status of 404 (Not Found)
When I open the web root in my ftp client the files are definitely there as you would expect. I am using Azure Small Basic Hosting, any thoughts on what has gone wrong and how to fix the websites?
Site 1: http://goo.gl/VONbHc
Site 2: http://goo.gl/wdTP67
LiamHi,
I tested your site 1, when I open http://goo.gl/VONbHc, it direct me to
http://templestudios.azurewebsites.net/ ,so I think you create templestudios as your azure website name. it seems that the page will go directory to another page, one image html code as below.
<img width="300" height="225" title="Portrait Photography" class="thumb wp-post-image" alt="Portrait Photography" src="http://www.photostudio.ie/wp-content/uploads/portrait-girl-dublin-300x225.jpg">
The image was not found seems more relate to
http://www.photostudio.ie , I open this site, contents are as following screenshot.
Hope this helps
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
SCCM 2012 Clients at Secondary Site don't update and shows status as INACTIVE
I have 1 Primary site and 1 Secondary sites. I have setup Secondary site Boundaries using IP subnet. I see that the systems from secondary
site show in the console and they all have clients installed but however 60% of the system shows client activity as INACTIVE and not receiving any heartbeat DDR none of the system showing hardware inventory. I am not positive
where to look as far as logs are concerned. I think the clients aren't receiving policy like they should.
Just to give a brief idea, Secondary Site server crashed and we had to rebuild the server and re install secondary site after rebuilding all the
problem. Everything is working fine in Primary site.
Secondary site is communicating with primary site MP and DP
I have checked MPcontrol.log it shows status as OK
I am able to install client through console but yes when I check the configuration manager properties it shows CCM Notification Agent as DISSABLED
and in the Action Tab Machine and User policy are the only cycles showing.
Checked replmgr.log and rclctrl.log but it’s not showing any error
Only log file which shows error is bgdserver.log ( pasting log errors )
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060 SMS_NOTIFICATION_SERVER 05-07-2014 12:09:01 3968 (0x0F80)
ERROR: Can't do post authentication without client certificate stored in regsitration. SMS_NOTIFICATION_SERVER
05-07-2014 12:09:01 3968 (0x0F80)
ERROR: Failed to authenticate with client [::ffff:10.5.55.88]:49623. SMS_NOTIFICATION_SERVER 05-07-2014
12:09:01 3968 (0x0F80)
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060 SMS_NOTIFICATION_SERVER 05-07-2014 12:09:01 3968 (0x0F80)
ERROR: Can't do post authentication without client certificate stored in regsitration. SMS_NOTIFICATION_SERVER
05-07-2014 12:09:01 3968 (0x0F80)
ERROR: Failed to authenticate with client [::ffff:10.5.62.68]:49923. SMS_NOTIFICATION_SERVER 05-07-2014
12:09:01 3968 (0x0F80)
ERROR: SQL exception when retrieve client certificate from DB. Exception: The EXECUTE permission was denied on the object 'sp_GetPublicKeyForSMSID', database 'CM_PRI',
schema 'dbo'. -2146232060 SMS_NOTIFICATION_SERVER 05-07-2014 12:09:06 3968 (0x0F80)
ERROR: Can't verify signature in message without client certificate for client SCCM GUID:B47059B1-D4E4-41A2-BC88-486A597FE399
SMS_NOTIFICATION_SERVER 05-07-2014 12:09:06 3968 (0x0F80)
ERROR: Invalid hook to be decoded. Authentication SMS_NOTIFICATION_SERVER
05-07-2014 12:09:06 3968 (0x0F80)
ERROR: Failed to decode message body (<BgbSignInMessage TimeStamp="2014-07-05T06:39:01Z"><ClientType>SCCM</ClientType><ClientVersion>5.00.7804.1000</ClientVersion><ClientID>GUID:B47059B1-D4E4-41A2-BC88-486A597FE399</ClientID></BgbSignInMessage>)
with message header
Help me resolve this issue as I am struggling to resolve this for almost 2 weeks.
Please let me know which logs are helpful and I'll try to add it to replies.Hi,
Quote:"see that the systems from secondary site show in the console and they all have clients installed but however 60% of the system shows client activity as INACTIVE and not receiving any heartbeat DDR none of the system showing hardware inventory. "
So not all the clients show inactive? Have you checked the logs in an inactive client? Such as ClientIDManagerStartup.log.
Have you checked Secondary Site server's computer name from SQL logins? You could try to remove this account, wait a while, recreate the same computeraccount login with sysadmin access. (http://social.technet.microsoft.com/Forums/en-US/d5383c23-6b71-47cc-9fad-fda82a44a3aa/secondary-site-showing-inactive-clients?forum=configmanagerdeployment)
You could use Configuration Analyzer for System Center 2012 R2 to troubleshoot issues.
http://technet.microsoft.com/en-us/library/dn469435.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Interview questions in process chain
hi
cany any one send me possible interview questions in process chain and errors with answer.
thanks in advance
pradeepHi Pradeep
1.Procedure for repeat delta?
You need to make the request status to Red in monitor screen and then delete it from ODS/Cube. Then when you open infopackage again, system will prompt you for repeat delta.
also.....
Goto RSA7->F2->Update Mode--->Delta Repetation
Delta repeation is done based on type of upload you are carrying on.
1. if you are loading masterdata then most of the time you will change the QM status to red and then repeat the delta for the repeat of delta. the delta is allowed only if you make the changes.
and some times you need to do the RnD if the repeat of delta is not allowed even after the qm status id made to red. here you have to change the QM status to red.
If this is not the case, the source system and therefore also the extractor, have not yet received any information regarding the last delta and you must set the request to GREEN in the monitor using a QM action.
The system then requests a delta again since the last delta request has not yet occurred for the extractor.
Afterwards, you must reset the old request that you previously set to GREEN to RED since it was incorrect and it would otherwise be requested as a data target by an ODS.
Caution: If the termianted request was a REPEAT request itself, always set this to RED so that the system tries to carry out a repeat again.
To determine whether a delta or a repeat are to be requested, the system ONLY uses the status of the monitor.
It is irrelevant whether the request is updated in a data target somewhere.
When activating requests in an ODS, the system checks delta repeat requests for completeness and the correct sequence.
Each green delta/repeat request in the monitor that came from the same DataSource/source system combination must be updated in the ODS before activation, which means that in this case, you must set them back to RED in the monitor using a QM action when using the solution described above.
If the source of the data is a DataMart, it is not just the DELTARNR field that is relevant (in the roosprmsc table in the system in which the source DataMart is, which is usually your BW system since it is a Myself extraction in this case), rather the status of the request tabstrip control is relevant as well.
Therefore, after the last delta request has terminated, go to the administration of your data source and check whether the DataMart indicator is set for the request that you wanted to update last.
If this is NOT the case, you must NOT request a repeat since the system would also retransfer the data of the last delta but one.
This means, you must NOT start a delta InfoPackage which then would request a repeat because the monitor is still RED. For information about how to correct this problem, refer to the following section.
For more information about this, see also Note 873401.
Proceed as follows:
Delete the rest of this request from ALL updated data targets, set the terminated request to GREEN IN THE MONITOR and request a new DELTA.
Only if the DataMart indicator is set does the system carry out a repeat correctly and transfers only this data again.
This means, that only in this case can you leave the monitor status as it is and restart the delta InfoPackage. Then this creates a repeat request
In addition, you can generally also reset the DATAMART indicator and then work using a delta request after you have set the incorrect request to GREEN in the monitor.
Simply start the delta InfoPackage after you have reset the DATAMART indicator AND after you have set the last request that was terminated to GREEN in the monitor.
After the delta request has been carried out successfully, remember to reset the old incorrect request to RED since otherwise the problems mentioned above will occur when you activate the data in a target ODS.
What is process chain and how you used it?
A) Process chains are tool available in BW for Automation of upload of master data and transaction data while taking care of dependency between each processes.
B) In one of our scenario we wanted to upload wholesale price infoobject which will have wholesale price for all the material. Then we wanted to load transaction data. While loading transaction data to populate wholesale price, there was a look up in the update rule on this InfoObject masterdata table. This dependency of first uploading masterdata and then uploading transaction data was done through the process chain.
What is process chain and how you used it?
A) We have used process chains to automate the delta loading process. Once you are finished with your design and testing you can automate the processes listed in RSPC. I have a real time example in the attachment.
for more detail
Collecting Process Chain Statistics
/thread/235805 [original link is broken]
Advice regarding process chains
creation of process chains
Message was edited by:
Kalpana M
Maybe you are looking for
-
How to debug reports in Reports 10g
Hi, I'm customizing one R12 seeded report.Seeded report is working fine but when I modify the report by changing the query criterion then it's failing.Is there any debug feature like dbsm_output with sqlerrm in reports 10g .I can use srw.message to p
-
Data Source is OLEDB connecting to AdventrureWorks2012 Setting Person.Address table column SpatialLocation to move it's data to Excel File Connection Manager created Right click on Source and choose Advance Editor External Column SpatialLocation Da
-
Process flow hangs in state "bussy"
Hi, We are encountering what seems to be a "random" problem when runing process flows. In about 1 out of 4 runs the flow "hangs" with status "busy" The technical specs are as follows: OWB 9.2.0.2.8 on WIN2K Server SP4. There are two runtime repositor
-
Photos wont optimize in Itunes on one PC
I have my Desktop computer, and my Laptop Computer. On the laptop I have 5 photos that I tryed loading to the Ipod through Itunes, it optimizes them automatically then copies them to the Ipod with no problems. On the desktop computer though, with the
-
Hi all., Here i am using TAXINN tax procedure ,in standard sap tell do not maintained the any condition type in tax default information in basic setting at tax goods on movement in logistics general for CIN details. That's why i have not maintained t