Interzone communication with local defined zones

We have defined two local zones. The internal zone allows only to register from an private network. The other zone allows to register clients from all other zone. The gatekeeper is accessible through static nat from the outside.
Netmeeting clients from the different networks are registered in the right zone. Clients in the same zone can talk eachother. If we try to connect to an user in the other zone, we get a message that the specified user is not registerd in any zone.
Our question: How can users from one zone see other users in the other zone, and how can they connect ? Should the h323-id of the client have a suffix like the zone name?
gatekeeper
zone local internal internal.net 10.x.x.x
zone local external external.net
zone subnet internal 10.x.x.x/24 enable
no zone subnet internal default enable
no zone subnet external 10.x.x.x/24 enable
zone subnet external default enable
.use-proxy internal remote-zone external inbound-to terminal
use-proxy internal remote-zone external outbound-from terminal
no shutdown
Further the proxy function between the terminals of both zone is activated. the proxy interface is defined on the physical interface.

Some of these cisco documents could help you solve the problem.
Basic Two Zone Gateway - Gatekeeper Configuration
http://www.cisco.com/warp/public/788/voip/2zone_gw_gk.html
Configuring Basic Gatekeeper Call Admission Control
http://www.cisco.com/warp/public/788/voip/add_control_gk.html
Understanding Cisco IOS H.323 Gatekeeper Call Routing
http://www.cisco.com/warp/public/788/voip/gk-call-routing.html
Configuring a Cisco IOS H.323 Gateway for Use with Cisco CallManager
http://www.cisco.com/warp/public/788/AVVID/config_h323_ccm.html

Similar Messages

Create table interval partition on a column timestamp with local time zone

Hi
Does anyone have an example for 11g on how to create a table with interval partitioning on a column defined as timestamp with local time zone. I know it's possible. the following does not work.
CREATE TABLE KOMODO_EXPIRED_RESULTS
TEST_EVENT_KEY NUMBER NOT NULL,
HPS_DEVICE_KEY NUMBER NOT NULL,
RCS_DEVICE_KEY NUMBER,
EVENT_START_TIMESTAMP TIMESTAMP(6) with local time zone NOT NULL,
BOOTROMVERSION NUMBER,
CHANNELNUMBER NUMBER,
CLIENTVERSION VARCHAR2(4000 BYTE),
ETHERNET_CRC_ERROR_COUNT NUMBER,
ETHERNET_DROPPED_PACKETS NUMBER,
ETHERNET_THROUGHPUT NUMBER,
ETHERNET_TRAFFIC_IN NUMBER,
ETHERNET_TRAFFIC_OUT NUMBER,
IPADDRESS VARCHAR2(4000 BYTE),
KOMODO_ID VARCHAR2(4000 BYTE),
LASTREBOOTTIME VARCHAR2(4000 BYTE),
OSVERSION VARCHAR2(4000 BYTE),
RECEIVER_AUDIOACCESSCONTROLER NUMBER,
RECEIVER_AUDIOBUFFEROVERFLOWS NUMBER,
RECEIVER_AUDIOBUFFERUNDERRUNS NUMBER,
RECEIVER_AUDIOCODEC VARCHAR2(4000 BYTE),
RECEIVER_AUDIODATADROPPED NUMBER,
RECEIVER_AUDIODATATHROUGHPUT NUMBER,
RECEIVER_AUDIODECODERERRORS NUMBER,
RECEIVER_AUDIODESCBUFFERUNDER NUMBER,
RECEIVER_AUDIODESCCRYPTOERROR NUMBER,
RECEIVER_AUDIODESCDATADROPPED NUMBER,
RECEIVER_AUDIODESCDATATHROUGH NUMBER,
RECEIVER_AUDIODESCDECODERERRO NUMBER,
RECEIVER_AUDIODESCDRMERRORS NUMBER,
RECEIVER_AUDIODESCPTSDELTA NUMBER,
RECEIVER_AUDIODESCPTSDELTAHAL NUMBER,
RECEIVER_AUDIODESCSAMPLESDROP NUMBER,
RECEIVER_AUDIODSPCRASHES VARCHAR2(4000 BYTE),
RECEIVER_AUDIOPTSDELTAHAL NUMBER,
RECEIVER_AUDIOSAMPLESDECODED NUMBER,
RECEIVER_AUDIOSAMPLESDROPPED NUMBER,
RECEIVER_AUDIOUNDERRUN NUMBER,
RECEIVER_BITRATE NUMBER,
RECEIVER_BUFFEROVERRUN NUMBER,
RECEIVER_BYTESCCRECEIVED NUMBER,
RECEIVER_BYTESRECEIVED NUMBER,
RECEIVER_CHANNEL NUMBER,
RECEIVER_DECODERSTALL NUMBER,
RECEIVER_DISCONTINUITIES NUMBER,
RECEIVER_DISCONTINUITIESPACKE NUMBER,
RECEIVER_DRIFT NUMBER,
RECEIVER_DROPPEDPACKETSUNTILR NUMBER,
RECEIVER_ECMLOOKUPERROR NUMBER,
RECEIVER_ECMPARSEERRORS NUMBER,
RECEIVER_PMTCHANGED NUMBER,
RECEIVER_REBUFFER NUMBER,
RECEIVER_SELECTCOMPONENTAUDIO NUMBER,
RECEIVER_TIMELINEDISCONTINUIT NUMBER,
RECEIVER_VIDEOACCESSCONTROLER NUMBER,
RECEIVER_VIDEOACCESSCONTROLUN NUMBER,
RECEIVER_VIDEOBUFFEROVERFLOWS NUMBER,
RECEIVER_VIDEOBUFFERUNDERRUNS NUMBER,
RECEIVER_VIDEOCODEC VARCHAR2(4000 BYTE),
RECEIVER_VIDEOCRYPTOERROR NUMBER,
RECEIVER_VIDEODATADROPPED NUMBER,
RECEIVER_VIDEODATATHROUGHPUT NUMBER,
RECEIVER_VIDEODECODERERRORS NUMBER,
RECEIVER_VIDEODRMERRORS NUMBER,
RECEIVER_VIDEODSPCRASHES VARCHAR2(4000 BYTE),
RECEIVER_VIDEOFIFORD NUMBER,
RECEIVER_VIDEOFIFOSIZE NUMBER,
RECEIVER_VIDEOFRAMESDECODED NUMBER,
RECEIVER_VIDEOFRAMESDROPPED NUMBER,
RECEIVER_VIDEOPTSDELTA NUMBER,
RECEIVER_VIDEOPTSDELTAHAL NUMBER,
RECEIVER_VIDEOUNDERRUN NUMBER,
SUBNETMASK VARCHAR2(4000 BYTE),
TUNER_BITRATE NUMBER,
TUNER_BUFFERFAILURE NUMBER,
TUNER_CCPACKETSRECEIVED NUMBER,
TUNER_CHANNEL NUMBER,
TUNER_DATATIMEOUTS NUMBER,
TUNER_DELIVERYMODE VARCHAR2(4000 BYTE),
TUNER_DROPPAST NUMBER,
TUNER_FILL NUMBER,
TUNER_HOLE NUMBER,
TUNER_HOLEDURINGBURST NUMBER,
TUNER_HOLEDURINGBURSTPACKETS NUMBER,
TUNER_HOLETOOLARGEPACKETS NUMBER,
TUNER_MAXIMUMHOLESIZE NUMBER,
TUNER_MULTICASTADDRESS VARCHAR2(4000 BYTE),
TUNER_MULTICASTJOINDELAY NUMBER,
TUNER_OUTOFORDER NUMBER,
TUNER_OVERFLOWRESET NUMBER,
TUNER_OVERFLOWRESETTIMES NUMBER,
TUNER_PACKETSEXPIRED NUMBER,
TUNER_PACKETSPROCESSED NUMBER,
TUNER_PACKETSRECEIVED NUMBER,
TUNER_PACKETSWITHOUTSESSION NUMBER,
TUNER_PARSEERRORS NUMBER,
TUNER_SRCUNAVAILABLERECEIVED NUMBER,
TUNER_TOTALHOLEPACKETS NUMBER,
TUNER_TOTALPACKETSEXPIRED NUMBER,
TUNER_TOTALPACKETSRECEIVED NUMBER,
TUNER_UNICASTADDRESS VARCHAR2(4000 BYTE),
RECEIVER_TUNEDFOR NUMBER,
MACADDRESS VARCHAR2(4000 BYTE),
RECEIVER_TOTALAVUNDERRUNS NUMBER,
RECEIVER_TOTALDISCONTINUITIES NUMBER,
SERVICEID VARCHAR2(4000 BYTE),
DRIVEPRESENT VARCHAR2(4000 BYTE),
STB_STATE VARCHAR2(32 BYTE),
PREV_EXPIRED NUMBER,
PREV_HOLES NUMBER,
PREV_RECEIVED NUMBER,
PREV_TIMESTAMP TIMESTAMP(6),
PREV_REBOOT VARCHAR2(4000 BYTE),
TOTALPACKETSEXPIRED_RATE NUMBER,
TOTALHOLEPACKETS_RATE NUMBER,
TOTALPACKETSRECEIVED_RATE NUMBER,
CONSTRAINT KOMODO_EXPIRED_RESULTS_PK
PRIMARY KEY
(HPS_DEVICE_KEY, EVENT_START_TIMESTAMP)
USING INDEX
TABLESPACE HPS_SUMMARY_INDEX
TABLESPACE HPS_SUMMARY_DATA
PARTITION BY RANGE (EVENT_START_TIMESTAMP)
INTERVAL( NUMTODSINTERVAL(1,'DAY'))
PARTITION DEFAULT_TIME_PART_01 VALUES LESS THAN (TIMESTAMP' 2010-08-01 00:00:00.000000000 +00:00')
LOGGING
COMPRESS FOR ALL OPERATIONS
TABLESPACE HPS_SUMMARY_DATA
NOCACHE
PARALLEL ( DEGREE DEFAULT INSTANCES DEFAULT )
MONITORING
/

I am not sure it can be done.
SQL> create table sales
2 (
3 sales_id number,
4 sales_dt TIMESTAMP(6) with local time zone NOT NULL
5 )
6 partition by range (sales_dt)
7 interval (numtoyminterval(1,'MONTH'))
8 ( partition p0901 values less than (to_date('2009-02-01','yyyy-mm-dd')) );
create table sales
ERROR at line 1:
ORA-14751: Invalid data type for partitioning column of an interval partitioned
table
SQL> ed
Wrote file afiedt.buf
1 create table sales
2 (
3 sales_id number,
4 sales_dt TIMESTAMP(6)
5 )
6 partition by range (sales_dt)
7 interval (numtoyminterval(1,'MONTH'))
8* ( partition p0901 values less than (to_date('2009-02-01','yyyy-mm-dd')) )
SQL> /
Table created.

Sun Live Upgrade with local zones Solaris 10

I have M800 server running global root (/) fs on local disk and running 6 local zones on another local disk. I am running solaris 5.10 8/07.
I used live upgrade to patch the system and created new BE (lucreate). Both root fs are mirror as RAID-1.
When I ran lucreate, it copies all 6 local zones root fs to the global root fs and failed no enogh space.
What is the best procedure to use lu with local zones.
Note: I used lu with global zone only, and worked without any problem.
regards,

I have been trying to use luupgrade for Solaris10 on Sparc, 05/09 -> 10/09.
lucreate is successful, but luactivate directs me to install 'the rest of the packages' in order to make the BE stable enough to activate. I try to find the packages indicated , but find only "virtual packages" which contain only pkgmap.
I installed upgrade 6 on a spare disk to make sure my u7 installation was not defective, but got similar results.
I got beyond luactivate on x86 a while ago, but had other snags which I left unattended.

Problem with Local Intranet in IE 11

Hi
We are experiencing a strange problem with Local Intranet in IE 11. We have a public company site which has been put into the Local Intranet site. The site contains content from 3 internal sites, which of course are part of Local Intranet per default.
Sometimes when I refresh the public company site I receive a security warning because IE says it's between zones.
Why? :-)
Might this be an issue because the 3 internal sites aren't hardcoded into Local Intranet through policy?
Lasse
/Lasse

Hi Lasse,
I would like to know if this issue happened in all user's IE browser.
Meanwhile,please post the screenshot here
so that we can help you analyze the issue.
Regards,
Kelvin Xu
TechNet Community Support

DP background jobs in local time zone

We are using APO DP in an international environment (SCM 4.1). We have setup up the system, that is using the local time zone (personal user settings), which is working fine in interactive planning (data views & macros). But when executing the macros
in background (APO background jobs triggered immediately by a process chain), the macro is run based on the server time and not in the local time zone. The ALEREMOTE user is set up in the same way online users regarding time zone settings.
Can someone explain, why the local time zone isn't used in the macros when executing in background, and tell me which setting we have missed.
Many thanks in advance
Marco

HI,
I understand the issue, the issue is the Australia gets days very first from the world.. it almost GMT+11 hrs. will almost a day difference to US.
I am not sure whether my proposal will make sense, but let me try
As the month completes we will copy the sales history for the closed month. where technically the the month is current month as per the system time.
Why can not change the macro to copy current period and run at system time? i am not sure aobut the otherconstriantes.
But looking at your question, it could be possible where your client has the local time zone defined. you can check the same from any APO screen, from menu > systems->status. you can see both time zone ( local) system time.
I suggest you check with basis if we can use the local time zone, we can use the localtimezone but agian everyone has to use our local time.. NO SENSE i guess..
Yarala

UNCAUGHT_EXCEPTION - communication with BW server

Hi,
I am getting an error UNCAUGHT_EXCEPTION which is due to communication with BW server. I get this while trying to define a local formula.
When i try to do the same activity with another user id, this does not happen.Is it becouse of authorization. If yes how can i find which authorization object is really creating problem ?
Regards,
Bill
Edited by: Bill Bryan on Jun 23, 2008 11:51 AM

authorization trace should give you information about what objects you are missing...
ST01 and check authorization check ..activate trace...and run whatever you were doing and check the trace log..
or you can ask the basis guy to make your authorization profile same as your colleague with whose id it was working...

AppV 5 slow to refresh with roaming profile (no redirects) but fast with local profile

Hi,
I have an issue I can't get thought out. I have an AppV5 SP3 full infra, with SMB share and local caching of packages enabled. Everything works from a functional level. However I have an issue where users with a roaming profile get a very slow AppV refresh
during login.
I created a few testaccounts, a few with local profile and a few with roaming profiles. For these testusers there are NO folder redirects. The only difference between them is local profile or roaming profile.
When I login with a local-profile user initially, the AppV client rather slowly refreshes the applications and shortcuts. It generates quite some CPU load on the RDS host, but as soon as the shortcuts are placed everything is fine. When I log that user off,
and log in again, the shortcuts are there immediately and I can immediately start the applications (Office 2010 for example). Blazing fast. Also when logging in, the refresh-UI is there for about half a second, it really flashes and it's done.
Then with a testuser with roaming profile, the initial refresh is about the same. But when I logoff that user and login again, it's all very slow. The shortcuts are there but blank initially, it takes about 5-10 seconds to get the correct icon. It takes
much longer before the refresh actually starts (sometimes up to 30 seconds after login), and it takes 5-10 seconds to do the refresh, with 100% cpu load on the thread AppVclient.exe is running on. Also right after loging in when the shortcuts are blank they
don't work until they get the proper icon. WHen everything is refreshed it works all fine though. It's just painfully slow at start.
I don't understand this. I can reproduce this every single time. Without folder redirects I don't see the difference between roaming and local profile from AppV perspective, as the roaming profile is of course copied to the server and in that sense the server
just works with a local copy anyway.
Anyone encountered this, and how to troubleshoot, or better fix this?

So is the fact that there is a 5-10 second delay during refresh actually an issue? What I mean by that is - are any users comparing the local profiles with roaming profiles experience, or complaining that the delay is there?
Roaming profiles and Folder redirection are of course very simple to configure; however for the best user experience I recommend managing profiles with a real profile management solution.
If you have MDOP, then you'll also have access to UE-V. You've mentioned your environment is RDS, which sadly doesn't get UE-V, even though you have App-V.
Here are some resources on UE-V + App-V and what's required when managing App-V with roaming users:
How To Use Microsoft User Experience Virtualization With App-V Applications
Application Publishing and Client Interaction: Roaming registry and data
Here's also some resources on App-V performance worth looking at:
Performance Guidance for Application Virtualization 5.0
App-V Performance Best Practices: New Project VRC White Paper
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

ITunes Seem to Have Suddenly Stopped Communicating With the CD/DVD Burner

Hello, I wonder if anybody can help - my itunes application seems to have suddenly stopped communicating with my laptop's cd/dvd burner
(Generic Name (E: H - T-S D D A S - 20N ATA Device)).
About 2 years ago, I have experienced a similar problem, but was able to resolve it by downloading 64-bit compatible GEAR drivers to my system. However, the problem has re-appeared when I have updated to iTunes Version 10.1. Funny enough, the cd/dvd burner started getting recognized again when I updated to iTunes Version 10.2, but halfway through me burning a large playlist to multiple cds has suddenly stopped recognizing the cd/dvd burner again, and has never "resolved itself" ever since.
I have tried multiple approaches to solving this issue, including completely re-installing itunes software and completely re-installing GEAR drivers, but nothing works. I have even tried uninstalling GEAR drivers completely, as I read that it worked for someone on one of the similar forums, but that didn't work either.
My itunes diagnostics runs all the points of the cd/dvd drive check successfully, except for the last point (Can Not Read Audio CD). Here's what the diagnostics summary looks like:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP Pavilion dv9700 Notebook PC
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver not found.
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0016AB580A7B0C28
Current user is not an administrator.
The current local date and time is 2011-04-14 17:52:25.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 7150M / nForce 630M
** External Plug-ins Information **
No external plug-ins installed.
The drive F: Motorola MB810 Rev 0001 is a USB 2 device.
iPodService 10.2.1.1 (x64) is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: H-T-S DDA
S_-20N, Rev W_05
Audio CD in drive.
Found 1 songs on CD, playing time 255:08 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading failed. Error Code: 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 3 9 16 24.
The drive CDRW speeds are: 3.
The drive DVDR speeds are: 3.
The drive DVDRW speeds are: 3.
Error Correction is turned on for importing audio CDs.
I have noticed that the diagnostics summary containes a suggestion to update firmware of my laptop's cd/dvd drive, but currently there are no such firmware updates available.
Another frustrating issue that I ran into was trying to convey this issue to Apple Technical Support via e-mail using the Express Lane for the troubleshooting issues. I really fail to understand why I am being asked for the "hardware serial number" when I'm clearly choosing the categories for "iTunes/CD-DVD Import Issues" which are software, not hardware, categories! This prevents me from being able to simply send the description of my problem to the correct Apple Support department, and does not let me do that even when I enter my itunes' Serial Number, which can be found in the diagnostics summary provided above.
Much Thanks to anyone who can provide any kind of helpful advice, even if it's just on how to be able to convey this problem to Apple Support via e-mail!

Okay ... checking something else:
Current user is not an administrator
Is that true? Or do you in fact have a Windows user account with full administrative rights?
(It's possible that a permission may have gone astray in your usual user account, which might be causing the burning issues.)

"An error occurred in the communication with the BW server"

Hi, when I open BEx Analyzer and try to connect to my BW server to run a query, I get this message, "An error occurred in the communication with the BW server".
Can someone help me.
thanks
Pat.

If it's happening consistently, it could be a problem with your local m/cs MS office and/or SAP GUI.
If it was working before:
1) Uninstall SAP GUI and MS office.
2) Install MS Office and SAP GUI...then try to connect to BW.
Good luck, BB

Error message on iweb, no communication with server

I have three websites on my iweb and hosted by Go Daddy. The main site will not download, error message no communication with server yet other two work fine. I have been to Apple Genius and talked to Go Daddy three times and all is supposedly in order but still will not work. I am able to download on Cyberduck
but using Iweb would be so much simpler. How can it work on two websites and not the third? Help!

If the main site, with the URL - http://www.domain-name.com - is not downloading in the browser, it will be because the external index.html file is not present in the root folder on the server.
The other sites will work because they have the folder-name in the URL ...
http://www.domain.com/Folder-Name/
... where Folder-Name is the name of the site in iWeb.
Its just a question of republishing the main site if you are using the iWeb FTP and use the settings shown on this page....
http://www.iwebformusicians.com/iWeb/Publish-Website.html
If you can use an FTP application, publish the site to a local folder and upload the external index.html file only, to the root folder on the server.

Problem with Local Interfaces (WSAD 5)

I built an Entity Bean with Local Interface and a Remote Interface (apperently they both have the same JNDI name in WSAD)
and when I look up for the name from other Session Bean (same EJB group) and I try to cast it to the local interface there is a classCastException.............
HELP ME

Nidhi
I had the same problems as you that went away. If you have both remote and local interfaces defined, and your remote inerface can be accessed via JNDI lookup using (say) "ejb/sessionbean/stateless/HelloHome", then you can access the local intercafe using "local:ejb/ejb/sessionbean/stateless/HelloHome".
The URL http://localhost:9080/UTC/initialize?port=2809 is very useful to browse the JNDI tree. Just expand "Local EJB beans" and position your mouse over the item of interest. The JNDI lookup name will echo in the bottom (solid) frame of the browser. The only problem is that the jndilookup name will appear (mistakenly) as local:/ejb/ejb/stateless......, just get rid of the first forward-slash to make it look like local:ejb/ejb/stateless....
Hope this helps
Somnath

The software required to communicated with iPods was not installed properly

Upon connecting my iPod to iTunes I get this message: "The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?"
Upon answering YES, iTunes shows an iPhone indicator in the upper right corner (even though a phone is not connected); but upon connecting the iPod, nothing happens.
So.......I try reinstalling iTunes as a REPAIR and get this message: "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternative path to a folder containing the installation package "iTunes64msi" in the box below.
Use Source:
C:\Users\User\AppData|Local|Apple Software
How can i fix this and not lose my 10,00 plus iTunes Library?
Thanks for any help.

"The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternative path to a folder containing the installation package "iTunes64msi"
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Lync 2013 Error 31055 ,31059 LS Call Park Service, The database being used by Group Pickup is not the appropriate version and There was a problem communicating with the Group Pickup backend database.

Hello
I have Lync 2013 and 2010 , still i didn't finish my migration completely from 2010 to 2013 .this is coexistence environment that contains both Lync Server 2010 and Lync Server 2013 .
There was no error's in my lync 2013 front end and back end server's and every thing was fine, yesterday I installed windows updated AND CU for my lync 2013 front end and backend server's .
later on after restarting both the front end and the back end server's i start having hundred's of these error's related to "LS Call Park Service".
so any advice for these issue ? and what is the effect for these error .
below is the error I got .
The database being used by Group Pickup is not the appropriate version.
The database is not the correct version:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Expected... SchemaVersion: 1, SprocVersion: 1, UpgradeVersion: 2
Actual... SchemaVersion: 0, SprocVersion: 0, UpgradeVersion: 0
Cause: The database has not been upgraded.
Resolution:
Upgrade the database to CU1.
==============================================================
There was a problem communicating with the Group Pickup backend database.
There were problems accessing SQL server:
Connection: Data Source=HQ-LYNC2013-BE.aaaaaaaaaaaaaaaaaaaaaaaaaa\rtc;Initial Catalog=cpsdyn;Integrated Security=True
Message: The EXECUTE permission was denied on the object 'DbpGetVersionSchema', database 'cpsdyn', schema 'dbo'.
Error code: -2146232060
Error number: 229
Cause: This may be caused by connectivity issues with the backend database.
Resolution:
Check if SQL backend is running and accepts connections from Group Pickup.
=============================================================================
Kind Regards
MK

Hello
thanks Holger for u r replay .
due to the Microsoft article about the cu :
I run only :
Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose
Note In a coexistence environment that contains both Lync Server 2010 and Lync Server 2013 and in which the Central Management Service is located on a Lync Server 2010 pool, do not run the
Install-CsDatabase -CentralManagementDatabase command. If you later move the Central Management Service to a Lync Server 2013 pool, you have to run the
Install-CsDatabase -CentralManagementDatabase command to apply the changes.
here is what I get on my power shell after i run the command : "WARNING: Warning: Failed to execute batch --"
PS C:\Users\MK> Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn HQ-LYNC2013-BE.MyDomain -Verbose
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.xml".
VERBOSE: Install databases required by Lync Server role(s).
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
VERBOSE: Assigning "BackendStore:BlobStore:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ArchivingStore:ArchivingDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:MonitoringDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "MonitoringStore:QoEMetricsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:LogPath" to F:\CsData
VERBOSE: Assigning "BackendStore:BlobStore:DbPath" to F:\CsData
VERBOSE: Assigning "BackendStore:RtcSharedDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ABSStore:AbsDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsConfigDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:RgsDynDatabase:DbPath" to F:\CsData
VERBOSE: Assigning "ApplicationStore:CpsDynDatabase:DbPath" to F:\CsData
VERBOSE: Installing "BackendStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is DbState_RequiresMinorUpgrade.
Database rtcxds set to mode Restricted.
Dropping all procedures, functions and views from database rtcxds.
Executing RtcDb.sql...
Adding master role...
Setting owner for database rtcxds to sa.
Creating login MyDomain\RTCHSUniversalServices.
Creating user MyDomain\RTCHSUniversalServices.
Creating Schema MyDomain\RTCHSUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCHSUniversalServices to role ConsumerRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ConsumerRole.
Adding account MyDomain\RTCHSUniversalServices to role ReplicatorRole.
Adding account MyDomain\RTCHSUniversalServices to role PublisherRole.
Adding account MyDomain\RTCUniversalServerAdmins to role PublisherRole.
Setting database version: Schema Version 15, Sproc Version 13, Update Version 2.
Setting the database rtcxds to multi user mode.
Database rtcxds is set to multi user mode.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcshared.
Database created by script "RtcSharedDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-BackendStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_01].log"
VERBOSE: Installing "ABSStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.AbsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rtcab.
Checking state for database rtcab.
State of database rtcab is DbState_RequiresMinorUpgrade.
Database rtcab set to mode Restricted.
Dropping all procedures, functions and views from database rtcab.
Executing RtcAbTypes.sql...
WARNING: Warning: Failed to execute batch --
-- Copyright (c) Microsoft Corporation. All rights reserved.
exec sp_addrole N'ServerRole'.
Executing RtcAbDb.sql...
Setting owner for database rtcab to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 42, Update Version 3.
Setting the database rtcab to multi user mode.
Database rtcab is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ABSStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_20].log"
VERBOSE: Installing "ApplicationStore" on HQ-LYNC2013-BE.MyDomain\rtc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsConfigDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsconfig.
Database created by script "RgsConfigDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RgsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database rgsdyn.
Database created by script "RgsDynDatabase" already exists and is current.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.CpsDynDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database cpsdyn.
Checking state for database cpsdyn.
State of database cpsdyn is DbState_RequiresMinorUpgrade.
Database cpsdyn set to mode Restricted.
Dropping all procedures, functions and views from database cpsdyn.
Executing CpsDyn.sql...
Setting owner for database cpsdyn to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Creating login MyDomain\RTCUniversalReadOnlyAdmins.
Creating user MyDomain\RTCUniversalReadOnlyAdmins.
Creating Schema MyDomain\RTCUniversalReadOnlyAdmins.
Creating login MyDomain\RTCUniversalServerAdmins.
Creating user MyDomain\RTCUniversalServerAdmins.
Creating Schema MyDomain\RTCUniversalServerAdmins.
Adding account MyDomain\RTCComponentUniversalServices to role ReadWriteRole.
Adding account MyDomain\RTCUniversalServerAdmins to role ReadWriteRole.
Adding account MyDomain\RTCUniversalReadOnlyAdmins to role ReadOnlyRole.
Setting database version: Schema Version 1, Sproc Version 1, Update Version 2.
Setting the database cpsdyn to multi user mode.
Database cpsdyn is set to multi user mode.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ApplicationStore-HQ-LYNC2013-BE.MyDomain_rtc-[2014_11_13][14_35_37].log"
VERBOSE: Installing "ArchivingStore" on HQ-LYNC2013-BE.MyDomain\arc, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.ArchivingDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\arc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsLog.
Database created by script "ArchivingDatabase" already exists and is current.
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-ArchivingStore-HQ-LYNC2013-BE.MyDomain_arc-[2014_11_13][14_35_51].log"
VERBOSE: Installing "MonitoringStore" on HQ-LYNC2013-BE.MyDomain\mon, collocated: False
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.MonitoringDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
Checking state for database LcsCDR.
State of database LcsCDR is DbState_RequiresMinorUpgrade.
WARNING: The database LcsCDR being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\LcsCDR.mdf. Supplied path will be ignored.
WARNING: The database LcsCDR being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\LcsCDR.ldf. Supplied path will be ignored.
Database LcsCDR set to mode Restricted.
Dropping all procedures, functions and views from database LcsCDR.
Executing CdrDb.sql...
Setting owner for database LcsCDR to sa.
Creating login MyDomain\CSAdministrator.
Creating user MyDomain\CSAdministrator.
Creating Schema MyDomain\CSAdministrator.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Adding account MyDomain\RTCComponentUniversalServices to role ReportsReadOnlyRole.
Adding account MyDomain\CSAdministrator to role ReportsReadOnlyRole.
Setting database version: Schema Version 39, Sproc Version 82, Update Version 2.
Setting the database LcsCDR to multi user mode.
Database LcsCDR is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing CdrJobs.sql...
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.QoEMetricsDatabase'****
Trying to connect to Sql Server HQ-LYNC2013-BE.MyDomain\mon. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 5058.
Sql version is acceptable.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
Checking state for database QoEMetrics.
State of database QoEMetrics is DbState_RequiresMinorUpgrade.
WARNING: The database QoEMetrics being updated has data file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\DbPath\QoEMetrics.mdf. Supplied path will be ignored.
WARNING: The database QoEMetrics being updated has log file path at
\\HQ-LYNC2013-BE.MyDomain\C$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf and supplied data file path is
\\HQ-LYNC2013-BE.MyDomain\F$\CsData\MonitoringStore\mon\LogPath\QoEMetrics.ldf. Supplied path will be ignored.
Database QoEMetrics set to mode Restricted.
Dropping all procedures, functions and views from database QoEMetrics.
Executing QoEDb.sql...
Setting owner for database QoEMetrics to sa.
Creating login MyDomain\RTCComponentUniversalServices.
Creating user MyDomain\RTCComponentUniversalServices.
Creating Schema MyDomain\RTCComponentUniversalServices.
Adding account MyDomain\RTCComponentUniversalServices to role ServerRole.
Setting database version: Schema Version 62, Sproc Version 90, Update Version 1.
Setting the database QoEMetrics to multi user mode.
Database QoEMetrics is set to multi user mode.
SQL Server Agent is running and its start mode was detected as Auto.
Executing QoEJobs.sql...
VERBOSE: Successfully installed the database. For details, see the following log:
"C:\Users\MK\AppData\Local\Temp\2\Create-MonitoringStore-HQ-LYNC2013-BE.MyDomain_mon-[2014_11_13][14_35_51].log"
VERBOSE: No changes were made to the Central Management Store.
VERBOSE: Creating new log file
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
WARNING: "Install-CsDatabase" processing has completed with warnings. "5" warnings were recorded during this run.
WARNING: Detailed results can be found at
"C:\Users\MK\AppData\Local\Temp\2\Install-CsDatabase-82d6613c-f2e3-47e6-8fc4-8f75d2efe6e4.html".
PS C:\Users\MK>
I hope some one can confirm no issue with what I did ??
Kind Regards
MK

Communication with XRAID via XRAID Admin frustration

I have an XRAID that properly mounts and works flawlessly from a storage point of view. However, I can't seem to be able to communicate with the device via RAID Admin. I have hard reset the power (unplug for > 1hour) the RAID.
To start the debug process, I downloaded RAID Admin onto my macbook pro and tried to find the XRAID. It worked perfectly. I can see both ethernet cards. It reports all is well with the device. I am spinning my wheels trying to find out what the difference between the two setups are.
I tried to manually input the ip addresses of the RAID controller (that I received from my laptop. 169.xxx.xx.xx from both cards) on my xserve to establish the connection with no success.
My xserve has a DNS without automatic client Bonjour browsing for domain enabled. My network input to my server comes from a comcast cable modem to an apple extreme then to the server.
Any ideas to further debug are really appreciated.
Much thanks
darnelld

What is the IP address of the computer your are trying to reach the 169.x machines? I'll assume you're talking about 169.254.x.x address - it must also be in the 169.254.x.x IP address range to talk to a network connection.
Certain IP ranges are set aside as special (169.254.. is self-assigned, 192.168.. is local) and are unroutable from outside that space. If your computer is on a publicly addressable space you will not be able to establish communication with a computer in any of these special non-routable ranges.
You either need to force a computer into the same space or make (at least) one of the network cards have a publicly reachable IP address via DHCP or whatever method you want.
HTH,
=Tod

Hard currency is not valuated in FAGL_FC_VAL along with local and group currency

Hi All,
I have the below system settings for FOREX revaluation. The revaluation is not happening for Hard currency along with local and group currency. The test data and other settings seams to be fine as the below mentioned workaround works perfectly for hard currency revaluation.
I would like to take your expert feedback on this issue to confirm whether this is how SAP works or its an issue with FAGL_FC_VAL program.
System Settings:
Currencies in company code
local currency      group currency      hard currency
10                             30                         40
USD                          USD                    UYU
FOREX settings:
Work around found:
Define two Valuation area, say
1. Valuation Area: A1 which will have currency type 10 and 30.
2. Valuation Area: A2 which will have only the currency type 40.
3. Run FAGL_FC_VAL twice for these area.
Issue with this work around:
1. The valuation area is assigned to one accounting principle (which is in turn assigned to a specific ledger).
2. Thus, if I have different accounting FOREX process to be followed in different ledgers (say IFRS ledger, Local Ledger, Tax ledger) then I need to create 2 valuation area (as per above workaround) for each ledgers and run FAGL_FC_VAL for each of these valuation areas.
Thanks & Regards
Nikhil Kothari

Hi Experts,
Any views on the above issue?
Thanks & Regards
Nikhil Kothari

Interzone communication with local defined zones

Similar Messages

Maybe you are looking for