Intra-doc links (can you have too many??)

I have an ebook that will be apprx 500 pages. If I create intra-document links from the Table of Contents to each chapter, then back links from each page in every chapter to the TOC will this slow the perfomance of the PDF or does the number of intra-document links have no impact on performace.
For example, if I had 12 chapters, each chapter listed in the TOC would link to the first page of each chapter.
All 500 pages would have a link on the bottom of each page that the user could click and be taken back to the TOC.
Thanks for your help.

I have some tables with over 100 million rows that still perform well, and I'm sure much larger tables are possible. The exact number of rows would vary significantly depending on a number of factors including:
Power of the underlying hardware
Use of the table – frequency of queries and updates
Number of columns and data types of the columns
Number of indexes
Ultimately the answer probably comes down to performance – if queries, updates, inserts, index rebuilds, backups, etc. all perform well, then you do not yet have too many rows.
The best way to rearrange the data would be horizontal partitioning. It distributes the rows into multiple files; which provides a number of advantages including the potential to perform well with larger number of rows.
http://msdn.microsoft.com/en-us/library/ms190787.aspx

Similar Messages

Can you have too many rows in a table?

How many rows would you consider to be too many for a single table and how would you re-arrange the data if
asked?
any answers?
sukai

I have some tables with over 100 million rows that still perform well, and I'm sure much larger tables are possible. The exact number of rows would vary significantly depending on a number of factors including:
Power of the underlying hardware
Use of the table – frequency of queries and updates
Number of columns and data types of the columns
Number of indexes
Ultimately the answer probably comes down to performance – if queries, updates, inserts, index rebuilds, backups, etc. all perform well, then you do not yet have too many rows.
The best way to rearrange the data would be horizontal partitioning. It distributes the rows into multiple files; which provides a number of advantages including the potential to perform well with larger number of rows.
http://msdn.microsoft.com/en-us/library/ms190787.aspx

You have too many sessions open. Please close one and execute the workitem.

Hi all,
I am new to Portal.
we have a SAP Inbox Iview that works fine, but the problem is when the user try to execute Purchase Requicition Approval, the error "You have too many sessions open. Please close one and execute the workitem." appears. What really bothers me is that the error appears as IE error message but the detail of the error looks like SAP.
Your help will be appreciated.

wanda89 wrote:
Most started out with 200-250 limits and now are at 1,000 or more in less than a year.Well, as noted, store cards can be a building tool and as I understand it you have been in that process for about a year and congrats on your progress. That said, I would not be applying for any additional store cards if there is not a specific need for it. This is not the type of credit you want in your profile in the long run. With regard to closing them: I don't know how this will affect your UTIL as I am not aware of your other cards limits however there are many people that have closed these types of cards when they determined there was no use for them, they were not needed any more, they were not the type/quality of cards they wanted to have in the long run, and lastly the history of that card would remain on their report for 10 years. Some bare bones info and the affects of closing cards: http://ficoforums.myfico.com/t5/Credit-Cards/Closing-Credit-Cards/td-p/347190 All that said, while the above lists the math of it all, if you will, it does not speak to the aspect of quality. As you continue to grow, how do you want your profile to look to lenders? Do you want to have 10 low quality store cards won by the credit card trick with limits in the 1k range that you may never use and can't really use substantially anyway as your UTIL would go through the roof very quickly with a 1k limit or do you want a lower number of high quality cards with healthy limits that will continue to grow overtime if you show them the respect they deserve?

What happens to the cube performance when you have too many UDAs?

Hi,
what's the impact on the cube performance if you have too many UDAs associated with the same level of members? Let's say 15 UDAs for each member
If attribute is not an option, what's another way to help alleviate the data load?

Hi,
Adding UDAs to the outline doesn't impact the size of Essbase database.
I've seen cubes with over 70 UDAs. And I think UDAs is the best choice to set load rules.
But for considering of the implication of Dynamic calculations as reporting on UDAs can be slow. Define UDAs on sparse dimensions only.

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

What to do if you have too many devices for 1 apple Id

I have too many apple devices to sync. Only one apple I'd at the moment. I am trying to figure out what to do? I have 3 iPads a 2 iPods and 1 iPod touch and an iPhone that I want to use the same overall library of content. What should I do when you can only have a maximum of 5 apple devices on one computer? Sorry not an apple genius.

If you asking me, I would suggest to additonally use a second storage service which also allows you to store your pictures over the 30 days period. I personally use Dropbox with automatic upload for that (https://db.tt/cMEgDUFZ), but there are also other storage services like Flickr for example.

CLD Tips - you can't have too many

Here's some specific practice items you might work on in preparation for the CLD.
Practice coding a timer that can be Paused, Restarted, Stopped, and Reset to Zero. Practice coding this timer from scratch. There are several examples on the forums of these timers.
Practice using the Timer express VI (don't reinvent the wheel if this timer will work for you. NI does not deduct points for using this VI, and it is in fact a very useful tool)
Practice your ability to properly apply a reset to the timer(s) in a state machine.
Practice accumulating a counter which can be reset by a user or automatically if a test is restarted. Remember, you will typically count how many times an event successfully takes place.
Practice subtracting elements from one thing while adding to another, and keep track of it. For example, subtract rocks from a rock pile while adding rocks to a dump truck. The rock pile has X rocks but the dump truck can hold only Y rocks. Say it takes 3.5 trips of the dump truck to carry away all the rocks. Can you keep track of that type of operation?
Practice creating and reading to/from an INI file, TXT file, Binary file, and CSV file.
Practice code that uses the File Dialog box, and handle all user input, including Cancel (don't let it throw an error, handle it).
Practice coding a proper sequencer using a State Machine. Your sequencer should be able to carry out a list of commands in a queue or array, and...
...be able to skip certain steps if requested by the user
...be able to be paused and then continued, while not loosing data such as time acrued on the current step.
...be able to be stopped and aborted, with exceptions handled, and your program goes to a proper state afterwards
...be able to be used again without stale data like timer values or skipped steps from past runs mucking up the new run
and the most important thing in my opinion, which has been said a lot but I'll say it again ....
Practice the sample exams and time yourself
Richard

In terms of time efficiency, a few thoughts. I haven't passed the CLD yet (1 week away for me), but this helped me improve my speed on the practice exams:
Learn to use Quick Drop, plus the Insert feature with Quick Drop. This drastically increased my coding speed. Make a few 3 or 4 letter shortcuts for commonly used diagram items and get used to them. You're given time to prep the LabVIEW environment before the exam, so add your favorite shortcuts. For the test, I would definitely include for/while/case structures, build array, replace array subset, queue functions. If you use variants then include Variant To Data and To Variant.
If you aren't already, get used to Auto-Tool. Using Auto-Tool saves you a second or so every time you want to modify anything on the block diagram or front panel. For EVERY action. A second isn't much on its own until you add it up for almost any click while coding.
When you're doing your planning after reading the spec (or as you read the spec), drop the notes down as comment boxes on the block diagram. This takes care of your planning while also starting your documentation.
Get used to doing a quick "Ctrl+I" to pull up a sub-VI's info. When you spawn a new sub-VI, do a Ctrl+I and go to Documentation. Fill out a quick little note here. Now whenever you do a "Ctrl+I" it'll go directly to Documentation and you can quickly type in a few notes.
Make sure you can quickly throw together your state machine template. I like to start with the producer/consumer template built into LabVIEW, then do my modifications from there. Whatever you're comfortable with, get used to tossing it together fast.
Good luck everyone!
http://linkd.in/mikele

Genius: "you have no memory because you have too many apps running" ?!?!?!?

hey all,
just a quick thing. I saw a genius today, because like many of you, i'm not only dealing with antenna issues but also have some really bad proximity sensor stuff. I mean, seriously, i've done three way calls, face timed everyone, end calls of 50-60 percent of my calls, searched maps, made new contacts, etc. all with my face! rrrgggg but what i was more puzzled about was what the genius told me was,
"you have no memory because there are too many apps running in the background" when i questioned and said, didn't steve say, "if you have to think about it, you've done it wrong" yet now i'm having issues with my phone, it is because of the multitasking? does this make any sense...it didn't to me. does he not know what he is talking about....or if he is right, there is nothing i can do about it right? he said there isn't a way to turn multi tasking off, just have manually quit programs.........any advice onto if he is correct...

john2049 wrote:
hey all,
just a quick thing. I saw a genius today, because like many of you, i'm not only dealing with antenna issues but also have some really bad proximity sensor stuff. I mean, seriously, i've done three way calls, face timed everyone, end calls of 50-60 percent of my calls, searched maps, made new contacts, etc. all with my face! rrrgggg but what i was more puzzled about was what the genius told me was,
"you have no memory because there are too many apps running in the background" when i questioned and said, didn't steve say, "if you have to think about it, you've done it wrong" yet now i'm having issues with my phone, it is because of the multitasking? does this make any sense...it didn't to me. does he not know what he is talking about....or if he is right, there is nothing i can do about it right? he said there isn't a way to turn multi tasking off, just have manually quit programs.........any advice onto if he is correct...
The genius is incorrect. The apps that are suspended in the background are told to release memory, and if there is a shortage of memory or they don't comply as required they will be terminated at will by the OS (freeing memory). This is all done behind the scenes and will not cause you any memory issues. And the upside is you can switch to them much faster.
Shorter version: memory not an issue with background tasks.

Cab you have too many songs in Itunes?

I currently have 10.000 songs and by the time I'm done it will be around 15.000. Is putting them all in the one library OK to do or is there something else I should be doing.
Thanks
Bob

Is putting them all in the one library OK to do
Yes.
(38613)

When i want to return to my home page I click on the home icon and it resets the page to my home page but also open a blak tab which i don't want how can I stop this as i have too many tabs open.

When I want to return to my home page after looking at a website I click on the home icon and it resets the page to my home page but also open a blak tab which i don't want.How can I stop this as I have too many tabs open and have to close all of them.

You may have an unwanted extension that is modifying sites (or the toolbar area). Try this:
Disable ALL nonessential or unrecognized extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable.
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Does that flush the tab?
Please report back on anything suspicious you find so others can learn about its bad behavior.

HT1349 I have a nano I never registered it, Its saying it can't sync my music because I have too many songs..

I have a Nano, I haven't ever registered it. It pops up an error message saying I have too many songs and it can't be synced. I need help.

Take a look at this link-> Apple - Support - iPod nano
specifically, the "Is there enough room on the iPod?" (about ⅓ of the way down this page)
in the Apple - Support - iPod nano - Syncing section.
If you still have the problem, the retailer who sold you the iPod nano can help you.
Mac OSX 10.8.2

We have too many apple devices, how can I creat another apple ID and divide the devices among 2 Apple Ids?

Hello all,
We started off with the original iPhone a few years ago and now between my wife and I (plus Kids) we have too many apple devices under the same apple-ID (2 X iPhone 6+, 2X macbook Pro, 2X iPod-touch and 1X iPad)
We are constantly running into issues because everyone in the house is using the same apple id, downloading Apps using the same ID, sharing the same cloud and receiving each other's iMessages.
I know that I can create another Apple-ID, what I am unclear on is once I do have a new apple ID, how do I assign that to half the devices (1X iPhone 6+, 1 X MBP and 1 Ipad)
Please respond if you are able to help.
Thank you

I'm not sure what they told your at the Apple store, but each Apple ID can only create a single iCloud account. If you want separate accounts for all these devices, they will have to be created using separate IDs. Note: you can do this and still share the same ID for other services such as your iTunes store account. The iCloud ID does not need to be the same as the ID used for other services.
To create an account, go to Settings>iCloud and sign in with a different Apple ID. If you want to migrate a copy of the current iCloud data to the different accounts, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; the devices keeping the current account will not be effected by this), provide the password to turn off Find My iDevice and choose Keep on My iDevice when prompted. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data.

How many libraries can you have in i photo?

How many libraries can you have in i photo?

gussie88 wrote:
Was she satisfied eventually!!! haha If you export and import photos to a new library, do faces -places etc transfer too? Thanks
Yes, I believe they do. The places data is associated with GPS coordinates tagged on each photo. I think the faces data works the same way -- it is associated with each photo regardless of what album it is in.

How many tasks can you have in a plan?

How many tasks can you have in a plan?
What is the maximum number of tasks I can reasonably expect to have in a newScale service (version 2007)?
I have approximately 30 tasks in my service. When the authorizations are complete, and the tasks are initially scheduled, my server response time (between clicking Approve and seeing the next screen) is about 30 seconds.
Does this sound unusual? Am I trying to do too much with my service?
Thanks!

Hi Joe,
There is no "upper limit" on the number of tasks that you can have in a plan. Having said that, the complexity of a plan -- including conditions and the use of external tasks -- can certainly be a factor in response times.
Having said this, 30 seconds seems like a long time and I strongly suggest that you open a case with customer care on this item.
We have alerted them to be looking for a case from you.

Can't add new icloud account to iPhone says that I have too many accounts please help! Forgot old username and email

I Made a new icloud account bc forgot my username and email and now I can't access bc says I have too many accounts on phone please help!

If the messages says the maximum number of accounts have already been created, you will not be able to create a new one on that phone. All you can do in that case is either reuse one of the accounts previously created or create your new account on a different iOS device or Mac, if you have one.

Intra-doc links (can you have too many??)

Similar Messages

Maybe you are looking for