Introduce New Investment FS items into existing system

Hi All,
Please help me with the following requirement:
Requirement:
Client want to introduce New Investment FS items into existing system to make reporting specific to countries.
Expected change - Investment specific:
All Activities (First consolidation, Increase in capital etc..) have only one item as default to collect data, however to make country reporting easy, client like to increase number of FS items. Hence we will have to introduce one more FS item in each level of activity and client wants to transfer some value from old FS items to New FS items.
Concern - If client wants to transfer any value from old Investment Item to New investment FS item, How should we tackle in system ?
Please share your thoughts on to achieve & advice me standard way if any.
Thanks
Kamal
Edited by: kamal kishore on Jul 20, 2010 2:35 PM

If you use Cons of Investments (COI) and the investments are read from the Additional Financial Data (AFD) then this change will be okay. The only thing that may arise are if the validations check the investments AFD compared to totals (selected in validation tasks). The validation errors will be corrected by changing the totals item to agree with the AFD.
If you use totals for investments it may be necessary to include all items in the location of values, however I have never used totals for investments.

Similar Messages

Inserting new line item into existing delivery using BAPI

Hi
can you send me the code for inserting new line item into existing delivery either using BAPI or
Function module.
We are using SAP 4.7 version

Hi Sreekanth,
Refer to this links
New item for outbound delivery via FM/BAPI?
/message/3976349#3976349 [original link is broken]
BAPI_OUTB_DELIVERY_CHANGE Help - Add new line item
hope it is useful to you.
Regards!

New Company Code Setup in existing System.

Hi Experts,
My client has approx 10 company codes and all are working fine. Now the client has acquired a new business and wants to create new company code in SAP R/3. The client has said that I have to copy the entire business processes designed for a particular company code in sap. FICO, MM, SD, CS, IM & PM are implemented here. Now here starts my querries related to this new requirement:
1. Is there any short way to create the new company code with all functionalities of a target company code or I have to go to each and every steps and do the customisation for new company code.
2. Regarding master data, how to copy the material master, vendor, customer GL etc to the new company code from the target company code.
3.What are the precautions which I should take care of during the new company code setup.
4. Your advise as how to go ahead for this.
Rgds,
BABA

Hi Shailesh,
I think my approach is as follows:
1. Generally, the tables in the sap are client dependent, client independent, company code dependent, country dependent, user defined code depedent.
So, when you use the copy function of the company, most of the company code dependent tables will get copied. The client dependent, client independent are how ever common for all the company codes in the client.
You need to work seperately on the country dependent tables and code dependent tables. Check the most of the tax configuration settings are country dependent. If the new company code is outside of the existing company codes countries, you need to focus on this.
If you find this is difficult in understanding the tables, talk to your ABAPer...
2. Regarding master datas - you need to create at the company code level.
3. The extensive unit and integration tests will help you alot.
Hope this helps you.
Regards,
Sreeni

New ECC system with new org structure into existing CRM 7 system

Hi,
We have a situation where we have a current ECC 6 system which distributes organisation structure to a CRM 7 system using ALE (org units, positions, personnel numbers).
We are implementing a new ECC 6 instance as a result of a merger which will have a new org structure, the CRM 7 system remains.
My question is has anyone dealt with a similar situation where a new org structure is distributed into an existing CRM or SRM system? Any lessons you could share? Or tips for how to approach this?
Thanks
Marc

You need to schedule program RHALENI in Insert mode to achieve the same
Thanks,
Sundeep

Idoc Type to add a new line item to existing Inbound delivery

Hi Friends,
we have one requirement.
In the system Inbound delivery is created through Idoc. Once the inbound delivery is created, we need to change that inbound delivery by adding a new line item to that inbound delivery where the line item belongs to another PO. Means, I have an existing inbound delivery number for a PO having one line item. Now I want to add another line item into the inbound delivery for another PO. I have created the inbound delivery through Idoc using the idoc type DESADV. Now I want to change the inbound delivery for adding the line item. Can anybody please tell me which idoc type should I use for this above highlighted requirement?
Thanks & Regards
Satya

Hi.
I have one PO 4500000001 for which I have created the inbound delivery 180000001. This inbound delivery has been created through an IDOC. I have another PO 4500000002 having one line item. Now i want to add another line item into the inbound delivery 180000001 for the PO 4500000002 as second line item. To add a second line item to the existing inbound delivery, which IDOC type should I use.
Hope it clarifies the requriement.
Thanks & Regards
Satya

How to add new coding mask into productional system

Hi,
A new division is entering our system and has a business requirement for a project coding mask C-00000.00.00.00.00 to handle capital investment projects. We would like this proces to make the good example for rolling out project models to the rest of the organisation (and for making new coding masks in the future)
However, we are facing a problem. Until now only the IT department has been using the project system and they have not had the need for mulitlevel projects or project models.
IT projects today is entered as free texts like:
Definition ITINTCOM001-S1003
WBS ITINTCOM001-S1003
with no regard to the coding. Logistics integration is used via networks and MM-SRV.
I have read in another issue in the forum that I was supposed to be able to enter additional coding masks as long as they did not interfear with existing coding masks. So I tried to transport a new coding mask into the system but it created an error message CJ 610 "Entry length is incorrect B-00000.00.00.00" with a reference to the coding (there are no existing projects using B- or any other coding mask). It also made a system dump when a wbs was searched via F4.
So I removed the coding again and the system went back to normal.
Since go-live is closing in I would be highly appreciative if anybody had a suggestion on how to solve this issue?
BR
Allan Albrecht

In the Node SPRO (T code OPSK) ie., Define Special Characters for Projects, mention '1' in PL field- Length of key for coding (as in your case the key is 'B') and don't check the check box SL. Also don't check the check box 'Edit'.
For reasons, refer the F1 help on these fields.
Save this and new coding mask in same request and transport it. Try this and let me us know if it solves the problem.
You can also refer to note 520944
Regards
Sreenivas

Can not add new VMS into existing clustered server pool

For some reason, we reinstall VMM (3.1.1-416) with existing UUID and rediscover all VMSs. The process went smooth and the whole system looks clean without dead objects any more. The guest VMs are all working fine. However, the new added VMS in unassigned servers are not displayed in the "Available Servers" when we want to add into existing clustered server pool, but it is shown when we add into unclustered server pool. Anyone has clue or possible way to debug what's wrong.
Thanks,
Shun-Jee Liu

The issue is resolved. The access group in shared iSCSI is not properly configured.

How to load new hirearchys into BW system from R/3

Hi
For PROFIT_CT & 0Account Hirerachies in R/3 source system,
a new hirearchy has been added and this new hirearchy need to load into BW system as it doesnt exists in BW system.
But in infopackage selection this new hirerachy doesnt exists,hence I tried to find this new hierarchy by REFRESHING in Infopackage Hirerachy Selection tab.Even then this new hirearchy doesnt exists.
But this new hirerachies exists in R/3 source system.
Can anyone let me know how to load this
Shankar

Hi Barry
Thanks for your message
This Tcode KSH3 is for Cost Center Hierarchy but not for Profit center or Account .
I checked in KCH3 & KDH3 tcodes for Profit center or Account hirerachies in R/3,
Both the hirerachies are mentioned in top node in R/3
But still these hierarechies doesnt exists in IP in BW
Can you let me know little further
Shankar

Windows 7 Ultimate isn't installing on my iMac. Setup was unable to create a new system partition or locate an existing system partition

I have a 21.5" iMac (Late 2012) running OS X Mavericks. I'm trying to install Windows 7 Ultimate via Bootcamp but whenever i get to the setup part it goes wrong
These are the steps I followed
I selected all the options since I didn't have the drivers or an install disk
it copied the Windows 7 iso image, downloaded the support software, and saved the support software to the flash drive (8GB)
I selected a partition size - I gave windows roughly 100GB
and I let it install
Right now I'm at the part where it says " where do you want to install windows? I selected the bootcamp partition and formatted it. It now says
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
WHAT DO I DO?

I had to read the apple instructions several times before they started to make sense. I burned my iso onto a DVD and had the required USB for support software. Are you trying to use the single USB method?
This article has a lot of info on the single usb method

Numbers will not display 3D charts on my new computer. I am running system 10.6.8. A 2D chart turns into a selected empty rectangle when I change it to a 3D chart. What do I do?

Numbers will not display 3D charts on my new computer. I am running system 10.6.8. A 2D chart turns into a selected empty rectangle when I change it to a 3D chart. What do I do? I am running iWork 9.1.

Hello
Numbers 2.1 under 10.7.2 on my iMac described below.
There is at least a thread describing what you get:
https://discussions.apple.com/message/15526080
It claims that it strike when the app is using the NVIDIA video card available in some macBook pro.
Yvan KOENIG (VALLAURIS, France) samedi 7 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2

Everytime my AppleTV2 enters into sleep modus it requests again the WIFI network password. This is new, where can I set the system to remember the password?

Everytime my Apple TV 2 enters into sleeping mode it requires my WIFI network password again upon reconnection. This is new, how can I set the system to remember the password?

Open Mail preferences, click on the Accounts icon in the toolbar then select your mail account, click on the Mailbox Behaviours tab on the right. Set the dropdown menu at the bottom for the Never option.
However, you cannot change the default options set for a newly created account.

How to Load new members into existing dimensions in Planning 9.3.1

Hi,
I am not having HAL, and is it possible to load members into existing dimensions of a newly created planning application - for example under accounts I want to add around 100 members - how to add them using a flat file without using HAL - is there anyother way out.
Can we use workspace->Navigate ->administer->Dimention Library
Create a new dimension here add that to Accounts ?? help me in this

John,
Can you suggest me the syntax to be used for the below example to create a flat file
the Hiearchy I have(for accounts and entity)
current:
Accounts
I need t have the following children under Accounts
Child of Accounts:Assets,alias(assets of x company)
Child of Asssets: 101, alias(asset1),Datastorage("store"), base currency("USD"),aggregation(+),Plantype("plan1")
Regards,

Grouping multiple news items into a single e-mail notification?

Hi,
We are on EP5 SP6 and would like to know if anyone knows how to group multiple news items into a single e-mail notification.
Thank you.

Hi Dirk,
Thanks for your reply.
We are looking to have newsletter capabilities in the portal. A good example would be the "Dev Today Newsletter - News Perspective" available from SDN. Essentially we would like users of our portal installation to choose the topics/news that they are interested in receiving and the frequency and then get that content in a formatted e-mail in the same manner that the Dev Today Newsletter is received.
All suugestions on achieving this outcome are welcome and much appreciated.
Thanks,
Rich
Message was edited by: Richard Maziarz

How can I add new row/column into existing jTable?

Hi add!
Can you help me how can I add new row/column into existing jTable?
Tnx in adv!

e.g
Create two buttons inside the Table ( "Add New Row" ) and ("Add new Column")
their handlers are:
add new row:
//i supose u already have
DefaultTabelModel tablemodel = new DefaultTableModel(rowdata, columnNames);
//and
   JTabel jtable = new JTable(tablemodel);
// Handler (row)
jbtAddRow.addActionListener(new ActionListener(){
   public void actionPerformed(ActionEvent e) {
      if(jtable.getSelectedRow() >= 0 )
          tablemodel.insertRow(jtable.getSelectedRow(), new java.util.Vector());
       else
            tablemodel.addRow(new java.util.Vector());
    });to add new columns its the same but inside actionPerformed method:
ask for e.g "Whats the name for the new column"
then,
   tablemodel.addColumn(nameOfColumn, new java.util.Vector());   Joao
Message was edited by:
Java__Estudante

Add new line item in existing outbound delivery

Hi,
I am trying to add new line item in existing outbound delivery with material number and quantity.
for this i tried BAPI_OUTB_DELIVERY_CHANGE and LE_MOB_DELIVERY_UPDATE.
but both fm doesn't work and this will not add new line in that delivery.
please help me how can i add new line item in delivery.
I hope someone will help me........plz
Thanks

This kind of question is about to become a FAQ, I think....search the forum for similar questions.

Introduce New Investment FS items into existing system

Similar Messages

Maybe you are looking for